Search NASA⌕ Search

SEARCH · Search NASA

Results for “FINALS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

CP violation in B{sub q} decays and final state strong phases

Using the unitarity, SU(2) and C invariance of hadronic interactions, the bounds on final state phases are derived. It is shown that values obtained for the final state phases relevant for the direct CP asymmetries A{sub CP}(B{sup 0}{yields}K{sup +}{pi}{sup -},K{sup 0}{pi}{sup 0}) are compatible with experimental values for these asymmetries. For the decays B{sup 0}{yields}D{sup (*)-}{pi}{sup +}(D{sup (*)+}{pi}{sup -}) described by two independent single amplitudes A{sub f} and A{sub f}{sup '} with different weak phases (0 and {gamma}) it is argued that the C invariance of hadronic interactions implies the equality of the final state phase {delta}{sub f} and {delta}{sub f}{sup '}. This in turn implies that the CP asymmetry (S{sub +}+S{sub -}/2) is determined by weak phase (2{beta}+{gamma}) only, whereas (S{sub +}-S{sub -}/2)=0. Assuming factorization for tree graphs, it is shown that the B{yields}D{sup (*)} form factors are in excellent agreement with the heavy quark effective theory. From the experimental value for ((S{sub +}+S{sub -}/2)){sub D*{pi}}, the bound sin(2{beta}+{gamma}){>=}0.69 is obtained and ((S{sub +}+S{sub -}/2)){sub D{sub S}*{sup -}K{sup +}}{approx_equal}-(0.41{+-}0.08)sin{gamma} is predicted. For the decays described by the amplitudes A{sub f}{ne}A{sub f} such as B{sup 0}{yields}{rho}{sup +}{pi}{sup -}: A{sub f} and B{sup 0}{yields}{rho}{sup -}{pi}{sup +}: A{sub f} where these amplitudes are given by tree and penguin diagrams with different weak phases, it is shown that in the limit {delta}{sub f,f}{sup T}{yields}0, r{sub f,f}cos{delta}{sub f,f}=cos{alpha} and (S{sub f}/S{sub f})=(S+{delta}S/S-{delta}S)-({radical}(1-C{sub f}{sup 2})/{radical}(1-C{sub f}{sup 2}))

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

First Simultaneous Measurement of Differential Muon-Neutrino Charged-Current Cross Sections on Argon for Final States with and without Protons Using MicroBooNE Data

We report the first double-differential neutrino-argon cross section measurement made simultaneously for final states with and without protons for the inclusive muon neutrino charged-current interaction channel. The proton kinematics of this channel are further explored with a differential cross section measurement as a function of the leading proton’s kinetic energy that extends across the detection threshold. These measurements use data collected with the MicroBooNE detector from 6.4 × 10 20 protons on target from the Fermilab booster neutrino beam with a mean neutrino energy of ∼ 0.8 GeV . Extensive data-driven model validation utilizing the conditional constraint formalism is employed. This motivates enlarging the uncertainties with an empirical reweighting approach to minimize the possibility of extracting biased cross section results. The extracted nominal flux-averaged cross sections are compared to widely used event generator predictions revealing severe mismodeling of final states without protons for muon neutrino charged-current interactions, possibly from insufficient treatment of final state interactions. These measurements provide a wealth of new information useful for improving event generators which will enhance the sensitivity of precision measurements in neutrino experiments. Published by the American Physical Society 2024

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Final Design and Analysis of the Superconducting Magnets for the Material Plasma Exposure Experiment

The Material Plasma Exposure eXperiment (MPEX), which has completed its final design, is a new linear plasma device to advance the understanding of plasma-material interactions through the generation and delivery of plasmas as they are expected in future fusion reactor divertors. MPEX will be a steady-state device to study high-fluence exposures of plasma-facing materials and components. The requirements for the magnetic field at the heating stages and the target make the application of superconducting coils necessary. The final designs for the superconducting magnets have been developed using three cryostat designs with warm bore diameters of 65 cm and 156 cm. The large bores are required to for other systems such as vacuum, water cooling, and RF power. There are 19 superconducting coils in MPEX that are contained in six cryostats. Although design, fabrication, and testing for the magnets as stand-alone units are straightforward, challenges will arise during the integration of the system. Various field profiles will be used during operation. The magnetic field where the electron cyclotron heating occurs needs to operate at both 1.25 and 2.50 T. Analyses that have been performed on the final design include designing the coils and determining operating currents to meet field requirements, forces between cryostats, the effects of coil and/or cryostat movement, and quench analysis. To ensure that the magnetic field requirements are met, a plan for monitoring the magnetic field at specified locations has been developed which includes the effect of coil and/or cryostat movement.

Burkhardt, Earle↗

Final-stage densification kinetics of direct current–sinteredZrB2

Final-stage sintering was analyzed for nominally phase pure zirconium diboride synthesized by borothermal reduction of high-purity ZrO2. Analysis was conducted on ZrB2 ceramics with relative densities greater than 90% using the Nabarro–Herring stress–directed vacancy diffusion model. Temperatures of 1900°C or above and an applied uniaxial pressure of 50 MPa were required to fully densify ZrB2 ceramics by direct current sintering. Ram travel data were collected and used to determine the relative density of the specimens during sintering. Specimens sintered between 1900 and 2100°C achieved relative densities greater than 97%, whereas specimens sintered below 1900°C failed to reach the final stage of sintering. The average grain size ranged from 1.0 to 14.7 μm. The activation energy was calculated from the slope of an Arrhenius plot that used the Kalish equation. The activation energy was 162 ± 34 kJ/mol, which is consistent with the activation energy for dislocation movement in ZrB2. The diffusion coefficients for dislocation motion that controls densification were 5.1 × 10−6 cm2/s at 1900°C and 5.1 × 10−5 cm2/s at 2100°C, as calculated from activation energy and average grain sizes. This study provides evidence that the dominant mechanism for final-stage sintering of ZrB2 ceramics is dislocation motion.

36 MATERIALS SCIENCE↗

EUV spectroscopy of plasmas created in the final anode-cathode gap of the Z-Machine high-current pulsed generator (SNL)

The effect of short-circuit across the final anode-cathode gap of powerful pulsed current generators could hamper efficient power delivery to the Z-pinch plasma. To study this effect, a novel EUV diagnostics of plasmas created in the final section of the transmission line (the anode-cathode gap near the main load) of the Z-Machine high-current generator (Sandia National Laboratories, United States) was developed. The work included developing spectroscopic instruments, theoretical and experimental studies of EUV spectra of iron ions in well-diagnosed laser-produced plasmas, and a comparison of these spectra with those of plasmas created in the final anode-cathode gap of the transmission line. The EUV spectra of highly charged Fe ions in the spectral range {lambda} {approx} 20-800 A were investigated. In experiments performed at Sandia National Laboratories, spectra of FeXIII-FeXVII ions were observed. A comparison of the measured and calculated spectra shows that the electron plasma temperature in the anode-cathode gap is T{sub e} {approx} 200 eV.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Search for exotic decays of the Higgs boson to a pair of pseudoscalars in the $μμ bb$ and $ττ bb$ final states

A search for exotic decays of the Higgs boson (H) with a mass of 125 GeV to a pair of light pseudoscalars a 1 is performed in final states where one pseudoscalar decays to two quarks and the other to a pair of muons or leptons. A data sample of proton–proton collisions at $\sqrt{s}$ = 13 TeV corresponding to an integrated luminosity of 138 fb -1 recorded with the CMS detector is analyzed. No statistically significant excess is observed over the standard model backgrounds. Upper limits are set at 95% confidence level (CL) on the Higgs boson branching fraction to μ μ b b and to τ τ b b via a pair of a 1 s. The limits depend on the pseudoscalar mass m a 1 and are observed to be in the range (0.17–3.3) x 10 -4 and (1.7–7.7) x 10 -2 in the μ μ b b and τ τ b b final states, respectively. In the framework of models with two Higgs doublets and a complex scalar singlet (2HDM+S), the results of the two final states are combined to determine upper limits on the branching fraction ${\mathcal {B}}(\text {H} \rightarrow \text {a}_{1} \text {a}_{1} \rightarrow \ell \ell \text{ b } \text{ b})$ at 95% CL, with ℓ being a muon or a τ lepton. For different types of 2HDM+S, upper bounds on the branching fraction ${\mathcal {B}}(\text {H} \rightarrow \text {a}_{1} \text {a}_{1} )$ are extracted from the combination of the two channels. In most of the Type II 2HDM+S parameter space ${\mathcal {B}}(\text {H} \rightarrow \text {a}_{1} \text {a}_{1} )$, values above 0.23 are excluded at 95% CL for m a 1 values between 15 and 60 GeV.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Current Progress of the Final Design of a Subcritical Assembly at the Oak Ridge National Laboratory

During the past decade, the US Department of Energy (DOE)/National Nuclear Security Administration (NNSA) Nuclear Criticality Safety Program (NCSP) has been coordinating nuclear criticality safety (NCS) courses to provide training and qualification to new staff, supervisors, managers, regulators, and other professionals involved with NCS. To address the growing need for more NCS training possibilities, a subcritical assembly was designed at Oak Ridge National Laboratory (ORNL). The Oak Ridge Subcritical Assembly (ORSA), operated at ORNL, could be used in a new course for fissile material handlers/operators or as a backup training facility for currently existing NCSP hands-on NCS training. This paper describes some of the design steps necessary for obtaining a final ORSA design, beginning with a successful feasibility study performed in 2020. Numerous parameters within each main element of the assembly were considered, such as the reflector used, the type of fuel coating or plating used, and the number of fuel plates used. The design choices related to each parametric study described in this paper are detailed and justified at the end of each subsection. An overview of the current final design characteristics of ORSA and the experiments’ possibilities is also provided. ORSA will be built with fuel plates from legacy Aerojet General Nucleonics (AGN)-201M research reactors currently stored at the Y-12 National Security Complex (Y-12). The cylindrical fuel plates comprise UO 2 particles embedded in polyethylene and have a nominal enrichment of 19.5 ± 0.5 wt % 235 U. The basis for the final design was the feasibility study from 2020. In the feasibility study, ORSA achieved k eff = 0.95, corresponding to a multiplication factor of 20, with approximately 620 g of 235 U (four 4 cm plates, three 2 cm plates, and two 1 cm plates) and an 8.5 cm thick graphite reflector radially and on top of the assembly. The bottom of the assembly has a graphite thickness of 5 cm, and the chosen graphite density was 2.3 g/cm 3 . All design calculations were performed using SCALE 6.2.4 KENO-VI and with the ENDF/B VII.1 Continuous Energy cross-section library.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Final cooling with thick wedges for a muon collider

In the final cooling stages for a muon collider, the transverse emittances are reduced while the longitudinal emittance is allowed to increase. In previous studies, Final 4-D cooling used absorbers within very high field solenoids to cool low-momentum muons. Simulations of the systems did not reach the desired cooling design goals. In this study, we develop and optimize a different conceptual design for the final 4D cooling channel, which is based on using dense wedge absorbers. We used G4Beamline to simulate the channel and Python to generate and analyze particle distributions. We optimized the design parameters of the cooling channel and produced conceptual designs (corresponding to possible starting points for the input beam) which achieve transverse cooling in both x and y by a factor of ~3.5. These channels achieve a lower transverse and longitudinal emittance than the best design previously published.

43 PARTICLE ACCELERATORS↗

Final Project Report Project 10749-4.2.2.1 2007-2009

This is the final report for the DOE Project 10749-4.2.2.1 for the FY2007 - FY2009 period. This report is non-proprietary, and will be submitted to DOE as a final project report. The report covers activities under the DOE Project inside CRADA 269 (Project 53231) as well as project activites outside of that CRADA (Project 56662). This is the final report that is summarized from the non-proprietary quarterlies submitted to DOE over the past 2.5 years, which in turn are summaries from the proprietary technical reporting to UOP.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

MPO B593110 - Final Report

National Security Technologies, LLC (NSTec) shall provide one (1) Mechanical Engineer to support the Linear Collider Subsystem Development Program at Lawrence Livermore National Security, LLC (LLNS). The NSTec Mechanical Engineer's efforts will include engineering, design, and drawing support for the Vacuum Seal Test. NSTec will also provide a final report of the setup and input to LLNL's project management on project status. The NSTec Mechanical Engineer's efforts will also include engineering, design, and drawing support to the conceptual design for manufacturing of the Flux Concentrator Magnet. NSTec will also contribute to LLNS's final report on the Flux Concentrator Magnet. The deliverables are drawings, sketches, engineering documents, and final reports delivered to the LLNS Technical Representative.

43 PARTICLE ACCELERATORS↗

ANSI/ASHRAE/IESNA Standard 90.1-2007 Final Determination Quantitative Analysis

The United States (U.S.) Department of Energy (DOE) conducted a final quantitative analysis to assess whether buildings constructed according to the requirements of the American National Standards Institute (ANSI)/American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE)/Illuminating Engineering Society of North America (IESNA) Standard 90.1-2007 would result in energy savings compared with buildings constructed to ANSI/ASHRAE/IESNA Standard 90.1-2004. The final analysis considered each of the 44 addenda to ANSI/ASHRAE/IESNA Standard 90.1-2004 that were included in ANSI/ASHRAE/IESNA Standard 90.1-2007. All 44 addenda processed by ASHRAE in the creation of Standard 90.1-2007 from Standard 90.1-2004 were reviewed by DOE, and their combined impact on a suite of 15 building prototype models in 15 ASHRAE climate zones was considered. Most addenda were deemed to have little quantifiable impact on building efficiency for the purpose of DOE’s final determination. However, out of the 44 addenda, 9 were preliminarily determined to have measureable and quantifiable impact.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Integrated Sensing and Controls for Coal Gasification - Development of Model-Based Controls for GE's Gasifier and Syngas Cooler (Final Technical Report)

This report summarizes the achievements and final results of this program. The objective of this program is to develop a comprehensive systems approach to integrated design of sensing and control systems for an Integrated Gasification Combined Cycle (IGCC) plant, using advanced model-based techniques. In particular, this program is focused on the model-based sensing and control system design for the core gasification section of an IGCC plant. The overall approach consists of (i) developing a first-principles physics-based dynamic model of the gasification section, (ii) performing model-reduction where needed to derive low-order models suitable for controls analysis and design, (iii) developing a sensing system solution combining online sensors with model-based estimation for important process variables not measured directly, and (iv) optimizing the steady-state and transient operation of the plant for normal operation as well as for startup using model predictive controls (MPC). Initially, available process unit models were implemented in a common platform using Matlab/Simulink{reg_sign}, and appropriate model reduction and model updates were performed to obtain the overall gasification section dynamic model. Also, a set of sensor packages were developed through extensive lab testing and implemented in the Tampa Electric Company IGCC plant at Polk power station in 2009, to measure temperature and strain in the radiant syngas cooler (RSC). Plant operation data was also used to validate the overall gasification section model. The overall dynamic model was then used to develop a sensing solution including a set of online sensors coupled with model-based estimation using nonlinear extended Kalman filter (EKF). Its performance in terms of estimating key unmeasured variables like gasifier temperature, carbon conversion, etc., was studied through extensive simulations in the presence sensing errors (noise and bias) and modeling errors (e.g. unknown gasifier kinetics, RSC fouling). In parallel, an MPC solution was initially developed using ideal sensing to optimize the plant operation during startup pre-heating as well as steady state and transient operation under normal high-pressure conditions, e.g. part-load, base-load, load transition and fuel changes. The MPC simulation studies showed significant improvements both for startup pre-heating and for normal operation. Finally, the EKF and MPC solutions were coupled to achieve the integrated sensing and control solution and its performance was studied through extensive steady state and transient simulations in the presence of sensor and modeling errors. The results of each task in the program and overall conclusions are summarized in this final report.

01 COAL, LIGNITE, AND PEAT↗

Advanced Optical Sensors to Minimize Energy Consumption in Polymer Extrusion Processes (Final Technical Report)

Project Objective: The objectives of this study are to develop an accurate and stable on-line sensor system to monitor color and composition on-line in polymer melts, to develop a scheme for using the output to control extruders to eliminate the energy, material and operational costs of off-specification product, and to combine or eliminate some extrusion processes. Background: Polymer extrusion processes are difficult to control because the quality achieved in the final product is complexly affected by the properties of the extruder screw, speed of extrusion, temperature, polymer composition, strength and dispersion properties of additives, and feeder system properties. Extruder systems are engineered to be highly reproducible so that when the correct settings to produce a particular product are found, that product can be reliably produced time after time. However market conditions often require changes in the final product, different products or grades may be processed in the same equipment, and feed materials vary from lot to lot. All of these changes require empirical adjustment of extruder settings to produce a product meeting specifications. Optical sensor systems that can continuously monitor the composition and color of the extruded polymer could detect process upsets, drift, blending oscillations, and changes in dispersion of additives. Development of an effective control algorithm using the output of the monitor would enable rapid corrections for changes in materials and operating conditions, thereby eliminating most of the scrap and recycle of current processing. This information could be used to identify extruder systems issues, diagnose problem sources, and suggest corrective actions in real-time to help keep extruder system settings within the optimum control region. Using these advanced optical sensor systems would give extruder operators real-time feedback from their process. They could reduce the amount of off-spec product produced and significantly reduce energy consumption. Also, because blending and dispersion of additives and components in the final product could be continuously verified, we believe that, in many cases, intermediate compounding steps could be eliminated (saving even more time and energy).

47 OTHER INSTRUMENTATION↗

Sintered CZTS Nanoparticle Solar Cells on Metal Foil (Final Report)

This is the final report covering 12 months of this subcontract for research on high-efficiency copper zinc tin sulfide (CZTS)-based thin-film solar cells on flexible metal foil. Each of the first three quarters of the subcontract has been detailed in quarterly reports. In this final report highlights of the first three quarters will be provided and details will be given of the final quarter of the subcontract.

14 SOLAR ENERGY↗

Extracting and Applying SV-SV Shear Modes from Vertical Vibrator Data Across Geothermal Prospects Final Report

This 3-year project was terminated at the end of Year 1 because the DOE Geothermal project-evaluation committee decided one Milestone was not met and also concluded that our technology would not be successful. The Review Panel recommended a? no-go? decision be implemented by DOE. The Principal Investigator and his research team disagreed with the conclusions reached by the DOE evaluation committee and wrote a scientifically based rebuttal to the erroneous claims made by the evaluators. We were not told if our arguments were presented to the people who evaluated our work and made the? no-go? decision. Whatever the case regarding the information we supplied in rebuttal, we received an official letter from Laura Merrick, Contracting Officer at the Golden Field Office, dated June 11, 2013 in which we were informed that project funding would cease and instructed us to prepare a final report before September 5, 2013. In spite of the rebuttal arguments we presented to DOE, this official letter repeated the conclusions of the Review Panel that we had already proven to be incorrect. This is the final report that we are expected to deliver. The theme of this report will be another rebuttal of the technical deficiencies claimed by the DOE Geothermal Review Panel about the value and accomplishments of the work we did in Phase 1 of the project. The material in this report will present images made from direct-S modes produced by vertical-force sources using the software and research findings we developed in Phase 1 that the DOE Review Panel said would not be successful. We made these images in great haste when we were informed that DOE Geothermal rejected our rebuttal arguments and still regarded our technical work to be substandard. We thought it was more important to respond quickly rather than to take additional time to create better quality images than what we present in this Final Report.

15 GEOTHERMAL ENERGY↗

Identification of $\tau$ leptons and Higgs boson search in the $\mu+\tau$ final state at the D0 experiment at the Tevatron

The gauge symmetry is the heart of our understanding of the electroweak interaction and describes all the current experimental results. However, the intrinsic incompatibility between the gauge invariance and the mass of particles leads to the introduction of a new particle, the Higgs boson, for which we have no experimental evidence as of today. This thesis describes the Higgs boson search in the μ + τ final state in 7.3 fb -1 of pp collisions at √s = 1.96 TeV collected by the DØ detector at the Tevatron. This analysis completes the golden channels (dimuons, electron-muon, dielectrons) exploiting the decay chain H → WW → ℓvℓv , which is the main Higgs boson decay mode in the mass window accessible to the Tevatron. Since the final state includes a lepton, work was done to improve their identification among jets. An increase of 15% was achieved thanks to the the following : changing tuning parameters for the identification neural network, use of the kinematical dependence of the algorithm performances, incorporation of the τ lepton life time information and full study of the additionnal information coming from the central preshower measurements. Then, since the dominant background of the μ + τ Higgs boson search is W+jets (where one jet fakes a τ ), a method was developed to obtain good modeling of this background, not provided by the default simulation. This method is based, among other things, on the charge correlation between the muon and the τ candidate which allows for calibration of this background in the data excluding the signal region. Finally, all the kinematic and/or topological differences between the signal and the background were exploited to optimize this search, reaching an (observed) expected sensitivity of 7.8 (6.6) times the Standard Model for m H = 165 GeV=c 2 . In addition, this result was also interpreted in a fourth fermion generation scenario. For the first time, this analysis is included in the D and Tevatron combinations, both presented at Moriond EW and EPS 2011.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

COE Task Order 4. Final Report: Automated Threat Recognition

Lawrence Livermore National Laboratory (LLNL) was tasked by the Department of Homeland Security (DHS) Science and Technology Directorate (S&T) with developing an automated target recognition algorithm for finding objects of interest in checked baggage at airports. The project used x-ray computed tomography (CT) data collected on a medical scanner of various simulated checked bags. Target objects of interest include clay, rubber, and saline in various concentrations. The final results are 93.9% probability of detection (P D ) with 11.9% probability of false alarm (PFA) on all targets and 100% detection for pseudo target sheets. This result is achieved by using a three-stage algorithm made up of segmentation, post-processing, and feature extraction and object classification. The segmentation proved to be the most important stage and it involves merging two distinct segmentation results followed by a set of algorithms for cleaning up the merged segmentations. The first segmentation algorithm operates on planar 10x10 voxel slabs (two- dimensional segments) in the three spatial planes. The segmenter calculates a probability that each slab in the image is a part of a target, determines if the probability was above a threshold, and then merges all connected slabs together. The second segmentation algorithm is an ensemble segmenter, which generates a set of possible segmentations through random permutations and computes an average behavior. The distinct properties of these segmenters results in a merged segmentation with superior results than either segmenter alone. The merged segmentation is “cleaned up” using post processing techniques to achieve the final labeled images. The final classification stage made use of a random forest classifier algorithm to discriminate targets from non-targets based on a set of features of the segmented objects partially from the voxel slabs and partially from the individual voxels. Features include standard statistics such as mean, median, and standard deviations of the density, features capturing some aspects of texture, and some features about the surrounding bag structure. In addition to the detection and false alarm results above, we show how the algorithms can be trained to “overfit” to the limited data set provided and achieve near perfect results (P D =100% and P FA =0%). This over-training is not recommended for long-term operation, but instead is meant to demonstrate how test design is an important factor in aviation security. Possible improvements to the algorithm and the testing methodology (including blind testing) are also presented.

42 ENGINEERING↗

Measurement of $WZ$ production and searches for anomalous top quark decays and Higgs boson production using tri-lepton final states in $p\bar{p}$ collisions at $\sqrt{s} = 1.96~\rm{TeV}$

We present the results of three analyses; a $WZ$ production cross section measurement, a search for new physics in anomalous top quark decays, and the search for the standard model Higgs boson, all with final states of three or more leptons -- either electrons or muons -- plus an imbalance of transverse momentum using Tevatron proton and anti-proton collisions at a center--of--mass energy of $\sqrt{s}$ = 1.96 TeV with the D0 detector at the Fermi National Accelerator Laboratory in Chicago, IL. The first analysis reports a measurement of the $WZ \rightarrow \ell^{\prime}\nu\ell\bar{\ell}$ cross section. Using 4.1 $fb^{-1}$ of integrated luminosity, we measure a cross section of 3.90$_{-0.85}^{+1.01}$($stat+syst$) $\pm$ 0.31($lumi$) pb, which is found to be in good agreement with the standard model prediction. The second analysis is an extension of the first, in which we use the same dataset and look for the flavor changing neutral current decay of $t \rightarrow Zq$ in $p\bar {p} \rightarrow t\bar{t} \rightarrow WbZq \rightarrow \ell^{\prime}\nu\ell\bar{\ell} + \rm{jets}$ decays. Here $q$ is considered to be either a $u$ or $c$ quark, and both the $q$ and $b$ quarks decay hadronically. We find no evidence of flavor changing neutral current production and set upper limits on the branching ratio of $BR(t \rightarrow Zq) < 3.2\%$ observed, with an expected limit of $< 3.8\%$, at the 95\% confidence level. Finally, we present a search for the standard model Higgs boson, using associated $WH$ and $ZH$ production, in the $ee\mu$ final state. Now using 9.7 $fb^{-1}$, the full dataset available at D0, we observe no excess above the standard model background prediction and extract limits on the Higgs boson production cross section times branching ratio for a Higgs boson mass range of $m_{H}$ = 100 -- 200 GeV/c$^2$, in intervals of 5 GeV/c$^2$.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗