Study of energy generators
Summary data on reactor physics, nuclear fuels, and fission products
Source record↗
SEARCH · Search NASA
Results for “Fission reactors”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Development of a model and test equipment for cold flow tests at 500 atm of small nuclear light bulb configurations
A model and test equipment were developed and cold-flow-tested at greater than 500 atm in preparation for future high-pressure rf plasma experiments and in-reactor tests with small nuclear light bulb configurations. With minor exceptions, the model chamber is similar in design and dimensions to a proposed in-reactor geometry for tests with fissioning uranium plasmas in the nuclear furnace. The model and the equipment were designed for use with the UARL 1.2-MW rf induction heater in tests with rf plasmas at pressures up to 500 atm. A series of cold-flow tests of the model was then conducted at pressures up to about 510 atm. At 504 atm, the flow rates of argon and cooling water were 3.35 liter/sec (STP) and 26 gal/min, respectively. It was demonstrated that the model is capable of being operated for extended periods at the 500-atm pressure level and is, therefore, ready for use in initial high-pressure rf plasma experiments.
Jaminet, J. F.↗
Open cycle gas core nuclear rockets
The open cycle gas core engine is a nuclear propulsion device. Propulsion is provided by hot hydrogen which is heated directly by thermal radiation from the nuclear fuel. Critical mass is sustained in the uranium plasma in the center. It has typically 30 to 50 kg of fuel. It is a thermal reactor in the sense that fissions are caused by absorption of thermal neutrons. The fast neutrons go out to an external moderator/reflector material and, by collision, slow down to thermal energy levels, and then come back in and cause fission. The hydrogen propellant is stored in a tank. The advantage of the concept is very high specific impulse because you can take the plasma to any temperature desired by increasing the fission level by withdrawing or turning control rods or control drums.
Ragsdale, Robert↗
A Deployable 40 kWe Lunar Fission Surface Power Concept
Continuous power at the kilowatt level will be imperative for future lunar users including crew infrastructure, future science, and in-situ resource utilization (ISRU). The Compass Team explored both 10 kWe and 40 kWe concepts, assuming planned lander and rover capabilities. Both concepts found that a crew pressurized rover chassis, repurposed for deploying reactor power components, could place a fission surface power system (FSPS) at least one km from users. While the 10 kWe fission power system (FPS) could be deployed as a single unit, the 40 kWe system was too large and had to be deployed in multiple trips with the same rover. Key technologies and design approaches included a high-assay low-enriched uranium (HALEU), yttrium hydride (YH) moderated heat pipe reactor, Stirling convertors, deployable radiators based on International Space Station (ISS) designs, and power conversion/transmission at ±2800 VDC for a one km remote distance.
Fission Power↗
Towards the Development of Molten Salt Reactor Multiphysics Modeling Capabilities: Depletion, Thermochemistry, Reactor Dynamics, and Species Tracking
This report documents the simulation and modeling work performed under the Nuclear Energy Advanced Modeling and Simulation (NEAMS) program, utilizing the tools and codes developed under the program. The focus in this Fiscal Year (FY) is on the depletion, thermochemistry, reactor dynamics, and species transport in MSRs. The fission products travelling in the entire primary loop is unique in MSRs. There are many physical/chemical mechanisms that can significantly affect the fission products concentration in the fuel salt, e.g., diffusion into gas bubbles, diffusion in the core moderators, deposition on the surface of structures/pipes, etc. The fission product concentration in the fuel salt can potentially affect the neutronics, system dynamics, chemical potentials, etc., so accurately predicting the fission products distribution in the primary loop is important. Under the main objective, different activities are pursued to assess the NEAMS tools applicability for a variety of areas on species transport, including the depletion analyses using Griffin (fission product source), the redox potential assessment at different depletion points, the assessment of xenon transport effect on the neutronics and reactor dynamics, a survey of correlations for calculating the mass transfer coefficient of different fission products, etc.
22 GENERAL STUDIES OF NUCLEAR REACTORS↗
Liquid Metal Pump Technologies for Nuclear Surface Power
Multiple liquid metal pump options are reviewed for the purpose of determining the technologies that are best suited for inclusion in a nuclear reactor thermal simulator intended to rest prototypical space nuclear surface power system components. Conduction, induction and thermoelectric electromagnetic pumps are evaluated based on their performance characteristics and the technical issues associated with incorporation into a reactor system. A thermoelectric electromagnetic pump is selected as the best option for use in NASA-MSFC's Fission Surface Power-Primary Test Circuit reactor simulator based on its relative simplicity, low power supply mass penalty, flight heritage, and the promise of increased pump efficiency over those earlier pump designs through the use of skutterudite thermoelectric elements.
Polzin, Kurt A.↗
Comprehensive Measurement of the Reactor Antineutrino Spectrum and Flux at Daya Bay
This Letter reports the precise measurement of the reactor antineutrino spectrum and flux based on the full dataset of 4.7 ×10 6 inverse-beta-decay candidates collected at Daya Bay near detectors. Expressed in terms of the inverse-beta-decay yield per fission, the antineutrino spectra from all reactor fissile isotopes and the specific 235 U and 239 Pu isotopes are measured with 1.3%, 3%, and 8% uncertainties, respectively, near the 3 MeV spectrum peak in reconstructed energy, reaching the best precision in the world. The total antineutrino flux and isotopic 235 U and 239 Pu fluxes are precisely measured to be 5.84 ± 0.07, 6.16 ± 0.12, and 4.16 ± 0.21 in units of 10 −43 cm 2 /fission. These measurements are compared with the Huber-Mueller model, the reevaluated conversion model based on the Kurchatov Institute measurement, and the latest summation model (SM2023). Furthermore, the Daya Bay flux shows good consistency with the Kurchatov Institute and SM2023 models but disagrees with the Huber-Mueller model. The Daya Bay spectrum, however, disagrees with all model predictions.
72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
HFIR High Power HEU Neutronics Analyses
Department of Energy National Nuclear Security Administration Office of Material Management and Minimization’s mission includes the conversion of civilian research reactors from highly enriched uranium (HEU) to low-enriched uranium (LEU) fuel. Analyses have shown that the Oak Ridge National Laboratory High Flux Isotope Reactor (HFIR) will need to operate at 95 MW for the LEU silicide dispersion fuel designs to match key performance metrics obtained with HEU fuel at 85 MW. To prove safe operation of HFIR after installation of plant modifications to increase power, a high power HEU test cycle was proposed. Neutronics model updates and reactor physics analyses are performed to support the development of safety design reports for the high power (HP) HEU test cycle. Reactor physics metrics evaluated herein include fuel depletion, actinide production, cycle length, fission rate density distributions, axial power peaking factors, and reactor kinetic parameters. These reactor physics analyses support the development of future LEU safety design reports by providing key input for future HP HEU HFIR thermal hydraulics and reactor transient safety analyses.
21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
Safe Affordable Fission Engine-(SAFE-) 100a Heat Exchanger Thermal and Structural Analysis
A potential fission power system for in-space missions is a heat pipe-cooled reactor coupled to a Brayton cycle. In this system, a heat exchanger (HX) transfers the heat of the reactor core to the Brayton gas. The Safe Affordable Fission Engine- (SAFE-) 100a is a test program designed to thermally and hydraulically simulate a 95 Btu/s prototypic heat pipe-cooled reactor using electrical resistance heaters on the ground. This Technical Memorandum documents the thermal and structural assessment of the HX used in the SAFE-100a program.
Steeve, B. E.↗
Test Results from a Direct Drive Gas Reactor Simulator Coupled to a Brayton Power Conversion Unit
Component level testing of power conversion units proposed for use in fission surface power systems has typically been done using relatively simple electric heaters for thermal input. These heaters do not adequately represent the geometry or response of proposed reactors. As testing of fission surface power systems transitions from the component level to the system level it becomes necessary to more accurately replicate these reactors using reactor simulators. The Direct Drive Gas-Brayton Power Conversion Unit test activity at the NASA Glenn Research Center integrates a reactor simulator with an existing Brayton test rig. The response of the reactor simulator to a change in Brayton shaft speed is shown as well as the response of the Brayton to an insertion of reactivity, corresponding to a drum reconfiguration. The lessons learned from these tests can be used to improve the design of future reactor simulators which can be used in system level fission surface power tests.
Hervol, David S.↗
Stirling Power Conversion for Lunar Applications
NASA is developing Stirling power convertors for use in nuclear power systems that would provide electricity to users on the lunar surface. NASA’s Radioisotope Power Systems (RPS) Program is maturing advanced dynamic convertor technologies that would increase the efficiency beyond the heritage systems for missions to the Moon and other solar system bodies of interest. Development efforts have focus on Stirling and Brayton designs that meet reliability and robustness requirements for operation in the lunar environment. GRC is also maturing low power convertors in the range of 1-40 watts to power micro-spacecraft or a network of distributed probes and include basic demonstration of in-house designs for convertors and controllers. In addition to RPS applications, conceptual fission systems have been demonstrated using Stirling convertors in multiple electrically heated tests and one test heated by a nuclear reactor. The Stirling convertors used in these fission system concepts include 100 We convertors to enable a 1 kWe system, 1 kWe convertors to enable a 10 kWe system, and 6 kWe convertors to enable a 40 kWe system. The maturation of Stirling power convertors for nuclear applications includes verification of performance in relevant environments and validation of the design with a focus on high reliability and robustness. Over 1 million hours of testing has been accumulated on dozens of convertors since 1999 in the Stirling Research Laboratory at the NASA Glenn Research Center located in Cleveland Ohio, where the longest running convertor is the work record holder at 137,000 hours, or 15.5 years. These maturation efforts have been instrumental in increasing the technology readiness level of Stirling technologies for space applications.
S. Wilson↗
Sodium Heat Pipe Module Processing For the SAFE-100 Reactor Concept
To support development and hardware-based testing of various space reactor concepts, the Early Flight Fission-Test Facility (EFF-TF) team established a specialized glove box unit with ancillary systems to handle/process alkali metals. Recently, these systems have been commissioned with sodium supporting the fill of stainless steel heat pipe modules for use with a 100 kW thermal heat pipe reactor design. As part of this effort, procedures were developed and refined to govern each segment of the process covering: fill, leak check, vacuum processing, weld closeout, and final "wet in". A series of 316 stainless steel modules, used as precursors to the actual 321 stainless steel modules, were filled with 35 +/- 1 grams of sodium using a known volume canister to control the dispensed mass. Each module was leak checked to less than10(exp -10) std cc/sec helium and vacuum conditioned at 250 C to assist in the removal of trapped gases. A welding procedure was developed to close out the fill stem preventing external gases from entering the evacuated module. Finally the completed modules were vacuum fired at 750 C allowing the sodium to fully wet the internal surface and wick structure of the heat pipe module.
Martin, James↗
Nuclear Safety [Vol. 32, No. 4, October-December 1991]
Nuclear Safety is a review journal that covers significant developments in the field of nuclear safety. Its scope includes the analysis and control of hazards associated with nuclear energy, operations involving fissionable materials, and the products of nuclear fission and their effects on the environment. Primary emphasis is on safety in reactor design, construction, and operation; however, the safety aspects of the entire fuel cycle, including fuel fabrication, spent-fuel processing, nuclear waste disposal, handling of radioisotopes, and environmental effects of these operations, are also treated. Table of Contents for this issue follows. GENERAL SAFETY CONSIDERATIONS: 477 Report on the International Symposium on the Use of Probabilistic Safety Assessment for Operational Safety—PSA '91, S. Chakraborty and M. Khatib-Rahbar; 488 Good Relationships Are Pivotal in Nuclear Data Bases, A. S. Heger and B. V. Koen; 494 Technical Note: The Interagency Nuclear Safety Review Panel's Evaluation of the Ulysses Space Mission, J. A. Sholtis, Jr., D. A. Huff, L. B. Gray, N. P. Klug, and R. O. Winchester; ACCIDENT ANALYSIS: 502 The Severe Accident Analysis Program for the Savannah River Nuclear Production Reactors, M. L. Hyder; CONTROL AND INSTRUMENTATION: 511 A Framework for Selecting Suitable Control Technologies for Nuclear Power Plant Systems, R. A. Kisner; DESIGN FEATURES: 521 Containments for Gas-Cooled Power Reactors History and Status, P.W. Williams; ENVIRONMENTAL EFFECTS: 537 Indoor Radon: A Natural Risk, N. H. Harley and J.H. Harley; On the Importance of the Atmospheric Parameters in the Fission Products Distribution of a Severe Reactor Accident, M. C. Barla and A. R. Bayulken; Book Review: Health Effects of Exposure to Low Levels of Ionizing Radiation BEIR V, C. R. Richmond; WASTE AND SPENT FUEL MANAGEMENT: 555 Activities Related to Waste and Spent Fuel Management, M. D. Muhlheim and E. G. Silver OPERATING EXPERIENCES: 567 Effects of Component Aging on the Westhinghouse Control Rod Drive System, K. Sullivan and W. Gunther; 577 Reactor Shutdown Experience, Compiled by J. W. Cletcher, 580 Selected Safety-Related Events, Compiled by G. A. Murphy; 582 Operating U 8 Power Reactors, Compiled by M. D. Muhlheim and E. G. Silver, RECENT DEVELOPMENTS: 596 General Administrative Activities, Compiled by M. D. Muhlheim and E. G. Silver; 610 Reports, Standards, and Safety Guides, D. S. Queener; 614 Proposed Rule Changes as of June 30, 1991; ANNOUNCEMENTS: 520 Workshop on PC PRAISE: A Probabilistic Fracture Mechanics Personal Computer Code for Nuclear Power Plant Piping Reliability Assessment; 536 Fifth Workshop on Nuclear Power Plant Containment Integrity; 624 New OECD "International Information System on Occupational Exposure (ISOE)"; 625 Harvard School of Public Health Announces Short Courses; 625 Eighth Power Plant Dynamics, Control and Testing Symposium; 626 Second Training Course on Off-Site Emergency Planning and Response for Nuclear Accidents; 618 The Authors; 622 Reviewers of Nuclear Safety, Vol 32.
11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
In-situ ion irradiation of fission products in a spent UO 2 fuel
This study investigates the behavior of fission gas bubbles and five metal precipitates (5MPs) (Mo, Ru, Rh, Tc, Pd) in spent uranium dioxide (UO 2 ) fuel under various ion irradiation doses, temperatures, and flux conditions. Utilizing in-situ ion irradiation and advanced transmission electron microscopy, we analyzed the evolution of fission gas bubbles and 5MPs in UO 2 samples from the Belgium Reactor 3 (BR-3). Our findings reveal significant shrinkage of fission gas bubbles and 5MPs with increasing irradiation dose, accompanied by a decrease in pair density. We demonstrate that ion irradiation induces a homogeneous re-solution process where individual atoms are ejected from bubbles and precipitates, leading to their dissolution and subsequent re-precipitation in the matrix. In conclusion, this study provides critical insights into the dynamic behavior of fission products under irradiation, facilitating the development of predictive models and contributing to the optimization of nuclear fuel performance and safety.
Fission products↗
In-situ ion irradiation of a spent UO2 fuel: evolution of fission products and nanograins with radiation dose
This study investigates the behavior of fission gas bubbles, five metal precipitates (5MPs) (Mo, Ru, Rh, Tc, Pd) and nanograins in spent uranium dioxide (UO2) fuel under various ion irradiation doses, temperatures, and flux conditions. Utilizing in-situ ion irradiation and advanced transmission electron microscopy, we analyzed the evolution of fission gas bubbles, 5MPs and nanograins in UO2 samples from the Belgium Reactor 3 (BR-3). Our findings reveal significant shrinkage of fission gas bubbles and 5MPs with increasing irradiation dose, accompanied by a decrease in pair density. The study also reveals nanograin coarsening under irradiation. We demonstrate that ion irradiation induces a homogeneous re-solution process where individual atoms are ejected from bubbles and precipitates, leading to their dissolution and subsequent re-precipitation in the matrix. This study provides critical insights into the dynamic behavior of fission products and nanograins under irradiation, facilitating the development of predictive models and contributing to the optimization of nuclear fuel performance and safety.
11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
Analysis and Down Select of Flow Passages for Thermal Hydraulic Testing of a SNAP Derived Reactor
As past of the Vision for Space Exploration, man will return to the moon. To enable safe and productive time on the lunar surface will require adequate power resources. To provide the needed power and to give mission planners all landing site possibilities, including a permanently dark crater, a nuclear reactor provides the most options. Designed to be l00kWt providing approx. 25kWe this power plants would be very effective in delivering dependable, site non-specific power to crews or robotic missions on the lunar surface. An affordable reference reactor based upon the successful SNAP program of the 1960's and early 1970's has been designed by Los Alamos National Laboratory that will meet such a requirement. Considering current funding, environmental, and schedule limitations this lunar surface power reactor will be tested using non-nuclear simulators to simulate the heat from fission reactions. Currently a 25kWe surface power SNAP derivative reactor is in the early process of design and testing with collaboration between Los Alamos National Laboratory, Idaho National Laboratory, Glenn Research Center, Marshall Space Flight Center, and Sandia National Laboratory to ensure that this new design is affordable and can be tested using non-nuclear methods as have proven so effective in the past. This paper will discuss the study and down selection of a flow passage concept for a approx. 25kWe lunar surface power reactor. Several different flow passages designs were evaluated using computational fluid dynamics to determine pressure drop and a structural assessment to consider thermal and stress of the passage walls. The reactor design basis conditions are discussed followed by passage problem setup and results for each concept. A recommendation for passage design is made with rationale for selection.
Godfroy, T. J.↗
Multi-principal element alloys for fast reactor cladding applications
Given the extensive list of multi-principal element alloys (MPEAs) within literature and the overwhelming number of alloys that can be made from only a handful of elements, this article proposes a methodology for prioritizing alloys for use as cladding within advanced reactors. This paper applies neutronic, mechanical, and chemical assessments to a collection of MPEAs available within literature for use as advanced reactor cladding. The results are compared to a reference design of HT9, a ferritic/martensitic steel, for employed in sodium-cooled fast reactor. Mechanical assessments determined pressure limits for a thin-walled tube pressure boundary, thus relating the material's mechanical properties to a minimum acceptable wall thickness. Neutronic analyses reveal a maximum allowable wall thickness that a given material must meet to provide a level of neutronic economy that is equivalent to than that of HT9. Lastly, each alloying element is compared to typical fission products found in a fast reactor fuels to mitigate deleterious phenomena such as fuel-cladding chemical interactions (FCCI). These analyses indicate that Mo-Nb-Ti-V-based alloys are likely to be advantageous and that the inclusion of elements with a high neutronic penalty (e.g., Hf) could be considered with minimal consequences.
11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
Physics and potentials of fissioning plasmas for space power and propulsion
A brief description of two gas core reactor concepts devised for propulsion applications is presented and recent research on the emission of radiation from nonequilibrium fissioning gases is considered. The principles of UF6 and plasma core reactor experiments are discussed. It is expected that the program of nuclear gas core reactor experiments can lead in several years to reactor operation at pressures, temperatures, and power levels of technological significance to terrestrial applications.
Thom, K.↗