Search NASA⌕ Search

SEARCH · Search NASA

Results for “Gravitational force”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
NASA NTRS1989

Icarus lander

Icarus is one of the earth-crossing asteroids. It has a semi-major axis of 1.078 AU, giving it a period of 1.12 years, and an eccentricity of 0.827. The perihelion distance is thus 0.187 AU. The inclination of Icarus's orbit is 23 deg. Although it is a small body, it is still massive enough to be essentially immune to non-gravitational forces. These orbital and physical qualities make it an attractive target for testing General Relativity. The close passage to the sun means that it will be subject to a large relativistic perihelion precession; the high eccentricity makes the precession easy to measure; the high inclination allows the solar quadrupole moment (J sub 2) to be simultaneously determined via the nodal precession it predicts. The degeneracy between the relativistic effect and the effect of J sub 2 in the perihelion precession may thus be broken. Results are presented from a preliminary study of a possible trajectory design for an Icarus lander and from a covariance study of the scientific return to be expected from such a mission.

Hellings, Ronald W.↗
NASA NTRS1989

Very accurate upward continuation to low heights in a test of non-Newtonian theory

Recently, gravity measurements were made on a tall, very stable television transmitting tower in order to detect a non-Newtonian gravitational force. This experiment required the upward continuation of gravity from the Earth's surface to points as high as only 600 m above ground. The upward continuation was based on a set of gravity anomalies in the vicinity of the tower whose data distribution exhibits essential circular symmetry and appropriate radial attenuation. Two methods were applied to perform the upward continuation - least-squares solution of a local harmonic expansion and least-squares collocation. Both methods yield comparable results, and have estimated accuracies on the order of 50 microGal or better (1 microGal = 10(exp -8) m/sq s). This order of accuracy is commensurate with the tower gravity measurments (which have an estimated accuracy of 20 microGal), and enabled a definitive detection of non-Newtonian gravity. As expected, such precise upward continuations require very dense data near the tower. Less expected was the requirement of data (though sparse) up to 220 km away from the tower (in the case that only an ellipsoidal reference gravity is applied).

Romaides, Anestis J.↗
NASA NTRS1990

A robot end effector exchange mechanism for space applications

Efficient robot operation requires the use of specialized end effectors or tools for tasks. In spacecraft applications, the microgravity environment precludes the use of gravitational forces to retain the tools in holding fixture. As a result of this, a retention mechanism which forms a part of the tool storage container is required. A unique approach to this problem has resulted in the development of an end effector exchange mechanism that meets the requirements for spaceflight applications while avoiding the complexity usually involved. This mechanism uses multiple latching cams both on the manipulator and in the tool storage container, combined with a system of catch rings to provide retention in both locations and the required failure tolerance. Because of the cam configuration the mechanism operates passively, requiring no electrical commands except those needed to move the manipulator into position. Similarly, it inherently provides interlocks to prevent the release of one cam before its opposite number is engaged.

Gorin, Barney F.↗
NASA NTRS1990

Prediction of the ullage gas thermal stratification in a NASP vehicle propellant tank experimental simulation using FLOW-3D

As part of the National Aero-Space Plane (NASP) project, the multi-dimensional effects of gravitational force, initial tank pressure, initial ullage temperature, and heat transfer rate on the 2-D temperature profiles were studied. FLOW-3D, a commercial finite difference fluid flow model, was used for the evaluation. These effects were examined on the basis of previous liquid hydrogen experimental data with gaseous hydrogen pressurant. FLOW-3D results were compared against an existing 1-D model. In addition, the effects of mesh size and convergence criteria on the analytical results were investigated. Suggestions for future modifications and uses of FLOW-3D for modeling of a NASP tank are also presented.

Hardy, Terry L.↗
NASA NTRS1988

High/variable mixture ratio O2/H2 engine

Vehicle/engine analysis studies have identified the High/Dual Mixture Ratio O2/H2 Engine cycle as a leading candidate for an advanced Single Stage to Orbit (SSTO) propulsion system. This cycle is designed to allow operation at a higher than normal O/F ratio of 12 during liftoff and then transition to a more optimum O/F ratio of 6 at altitude. While operation at high mixture ratios lowers specific impulse, the resultant high propellant bulk density and high power density combine to minimize the influence of atmospheric drag and low altitude gravitational forces. Transition to a lower mixture ratio at altitude then provides improved specific impulse relative to a single mixture ratio engine that must select a mixture ratio that is balanced for both low and high altitude operation. This combination of increased altitude specific impulse and high propellant bulk density more than offsets the compromised low altitude performance and results in an overall mission benefit. Two areas of technical concern relative to the execution of this dual mixture ratio cycle concept are addressed. First, actions required to transition from high to low mixture ratio are examined, including an assessment of the main chamber environment as the main chamber mixture ratio passes through stoichiometric. Secondly, two approaches to meet a requirement for high turbine power at high mixture ratio condition are examined. One approach uses high turbine temperature to produce the power and requires cooled turbines. The other approach incorporates an oxidizer-rich preburner to increase turbine work capability via increased turbine mass flow.

Adams, A.↗
NASA NTRS1988

Equilibrium shapes of rotating spheroids and drop shape oscillations

Recent work on the equilibrium shapes of a rotating spheroid and drop shape oscillations is reviewed. The related theoretical aspects of the equilibrium shapes of a rotating drop, the stability, shape oscillations, gravitational forces, and drop fission are examined. Experimental findings on figures of a rotating drop in an immiscible system, drop oscillations in an immiscible system, oscillations of a rotating drop, compound drop oscillations, and drop dynamics in space are addressed.

Wang, Taylor G.↗
NASA NTRS1989

The physics of planetesimal formation

Physical processes involved in the planetesimal formation are discussed with special attention given to the nature of aerodynamic interactions between solid bodies and gas in the solar nebula. It is emphasized that the model of planetesimal formation by gravitational instability of a dust layer yields predictions that are simple but almost certainly wrong. It is suggested instead that the formation of planetesimals began with the process of coagulation of grains into larger aggregates, and that gravitational forces became more important than gas drag only after objects as large as many meters in diameter had formed.

Weidenschilling, Stuart J.↗
NASA NTRS1989

Advances in fluid dynamics

Various papers on advances in fluid dynamics are presented. Individual topics addressed include: nonunique solutions of the Euler equations; numerical solution of the biharmonic equation using a spectral multigrid method; finite-volume shape and placement for efficiency, accuracy, and physics; NND schemes and their application to numerical simulation of complex plume flow problems; symbolic analysis and computational algorithm construction; and velocity and mass flux distribution measurements of spherical glass beads in air flow in a 90-deg vertical-to-horizontal bend. Also discussed are: hyperbolic solution adaptive mesh generation; progress and future directions in CFD; numerical simulation of shock focusing; microbubble formation and splitting in a turbulent boundary layer for turbulence reduction; numerical study of spherical Taylor-Couette flow, trajectories of vortex lines beneath a free surface or above a plane; and a mathematical model for response of the coronary circulation to high sustained gravitational force fields.

Ballhaus, W. F., Jr.↗
NASA NTRS1990

Scientific uses and technical implementation of a variable gravity centrifuge on Space Station Freedom

The potential need and science requirements for a centrifuge to be designed and flown on Space Station Freedom are discussed, with a focus on a design concept for a centrifuge developed at NASA Ames. Applications identified for the centrifuge include fundamental studies in which gravity is a variable under experimental control, the need to provide a 1-g control, attempts to discover the threshold value of gravitation force for psychological response, and an effort to determine the effects of intermittent hypergravity. Science requirements specify the largest possible diameter at approximately 2.5 m, gravity levels ranging from 0.01 to 2 g, a nominal ramp-up rate of 0.01 g/sec, and life support for plants and animals. Ground-based studies using rats and squirrel monkeys on small-diameter centrifuges have demonstrated that animals can adapt to centrifugation at gravity gradients higher than those normally used in ground-based hypergravity studies.

Johnson, C. C.↗
NASA NTRS1990

Simulation of disk-disk encounters with co-moving polar grids

The two-grid simulation method combining advantages of both polar and Cartesian mesh-codes is described. In addition to the stellar component reacting solely to gravitational forces, the gas component is included with dissipatively colliding particles. This allows fairly realistic simulation of planar encounters where both systems contain star plus gas disks.

Salo, Heikki↗
NASA NTRS1990

Experiments for electromagnetic levitation in microgravity

Containerless processing is a promising research tool for investigating the properties of undercooled melts and their solidification. For conducting samples RF-electromagnetic levitation offers the possibility to obtain large undercoolings by avoiding heterogeneous nucleation at container walls. On earth, however, strong magnetic fields are needed to compensate the gravitational force which imposes a lower limit on the available temperatures and on the accessible undercooling range. Under microgravity conditions the magnetic positioning fields can be minimized and hence, undercooling becomes feasible under ultra-high vacuum conditions and lower temperatures become accessible. In contrast to other undercooling and solidification techniques, electromagnetic levitation allows for diagnostic measurements during the early steps of nucleation and phase selection. Experiments cover a wide field of research topics: nucleation, directional solidification at high velocities, generation of metastable phases, evolution of microstructures, properties of undercooled liquids. Examples from these classes including experiments selected for the IML-2 mission are discussed with emphasis on technical requirements. An overview is given on the German TEMPUS (electromagnetic levitation facility) program.

Willnecker, R.↗
NASA NTRS1991

Ground-based testing of the dynamics of flexible space structures using band mechanisms

A suspension system based on a band mechanism is studied to provide the free-free conditions for ground based validation testing of flexible space structures. The band mechanism consists of a noncircular disk with a convex profile, preloaded by torsional springs at its center of rotation so that static equilibrium of the test structure is maintained at any vertical location; the gravitational force will be directly counteracted during dynamic testing of the space structure. This noncircular disk within the suspension system can be configured to remain unchanged for test articles with the different weights as long as the torsional spring is replaced to maintain the originally designed frequency ratio of W/k sub s. Simulations of test articles which are modeled as lumped parameter as well as continuous parameter systems, are also presented.

Yang, L. F.↗
NASA NTRS1990

Exploration of planetesimals by a tripartite tethered spacecraft

Asteroids and comets exert such a small gravitational force that it is not practical to survey them from orbit. One must instead continuously accelerate using maneuvering rockets to move around the surface. A space exploration craft in three parts connected by lightweight cables can survey asteroids and comets, and deploy landers, without requiring the large thrusters and the continuous depletion of fuel required by a single craft. The spacecraft is deployed by spinning up from a compact configuration using low thrust jets, and then maintain surveying orbit without any major expenditure of energy. The triangular tether arrangement is stable, but care must be taken in changing orbits and with deploying and recovering samples, as can be demonstrated with a simple simulation. Even 100 km long tethers occupy a low payload fraction.

Stephens, Richard B.↗
NASA NTRS1991

Gravity, Calcium, and Bone: Update, 1989

Some of the results of recent short-term flights and ground-based experiments that have contributed new insights into skeletal adaptation, calcium metabolism, and growth processes in 0 g, are highlighted. After 6 months in space, bone demineralization, invariably involving the os calcis, was found not to extend to the lumbar spine in 4 exercising cosmonauts. A flight experiment in the Space Shuttle crew has documented the early events in the calcium endocrine system during spaceflight. On the ground, brief and long-term bed rest studies of healthy volunteers in the head-down tile (HDT) model of weightlessness were completed. The skeleton of the adult male responds more rapidly to unloading than previously recognized. Regional changes in bone density can be quantified in only 30 days, are highly individual, and follow the direction of gravitational forces in the HDT model during inactivity. Bone biopsy results in healthy volunteers after bed rest differ from results in paraplegics from the same sampling site. Flight experiments in growing rats reveal changes in the composition of bone mineral and matrix in the femur postflight that were found to be highly regional and suggestive of an effect of gravity on mineral distribution. These observations may be relevant to the results from an earlier Cosmos flight where artificial gravity in space was found to maintain bone strength, but not to correct the radial growth deficit.

Arnaud, Sara B.↗
NASA NTRS1991

Cardiovascular Adjustments to Gravitational Stress

The effects of gravity on the cardiovascular system must be taken into account whenever a hemodynamic assessment is made. All intravascular pressure have a gravity-dependent hydrostatic component. The interaction between the gravitational field, the position of the body, and the functional characteristics of the blood vessels determines the distribution of intravascular volume. In turn this distribution largely determines cardiac pump function. Multiple control mechanisms are activated to preserve optimal tissue perfusion when the magnitude of the gravitational field or its direction relative to the body changes. Humans are particularly sensitive to such changes because of the combination of their normally erect posture and the large body mass and blood volume below the level of the heart. Current aerospace technology also exposes human subjects to extreme variations in the gravitational forces that range from zero during space travel to as much an nine-times normal during operation of high-performance military aircraft. This chapter therefore emphasizes human physiology.

Blomqvist, C. Gunnar↗
NASA NTRS1991

Analysis of the fluid flow and heat transfer in a thin liquid film in the presence and absence of gravity

The hydrodynamic and thermal behavior of a thin liquid film flowing over a solid horizontal surface is analyzed for both plane and radially spreading flows. The situations where the gravitational force is completely absent and where it is significant are analyzed separately and their practical relevance to a micro-gravity environment is discussed. In the presence of gravity, in addition to Reynolds number, the Froude number of the film is found to be an important parameter that determines the supercritical and subcritical flow regimes and any associated hydraulic jump. A closed-form solution is possible under some flow situations, whereas others require numerical integration of ordinary differential equations. The approximate analytical results are found to compare well with the available two-dimensional numerical solutions.

Rahman, M. M.↗
NASA NTRS1991

Comet and asteroid dynamics

In order to provide the ground-based observing community and NASA flight projects with accurate comet and asteroids ephemerides, improvements are being made to the existing dynamic models and new data type are being investigated. For active comets, non-gravitational forces must be taken into account; these forces are assumed due to the rocket-like thrusting of outgassing cometary ices.

Yeomans, Donald K.↗
NASA NTRS1991

Further evaluation of the constrained least squares electromagnetic compensation method

Technologies exist for construction of antennas with adaptive surfaces that can compensate for many of the larger distortions caused by thermal and gravitational forces. However, as the frequency and size of reflectors increase, the subtle surface errors become significant and degrade the overall electromagnetic performance. Electromagnetic (EM) compensation through an adaptive feed array offers means for mitigation of surface distortion effects. Implementation of EM compensation is investigated with the measured surface errors of the NASA 15 meter hoop/column reflector antenna. Computer simulations are presented for: (1) a hybrid EM compensation technique, and (2) evaluating the performance of a given EM compensation method when implemented with discretized weights.

Smith, William T.↗