Search NASA⌕ Search

SEARCH · Search NASA

Results for “HYDRODYNAMICS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

Experiments on the stability of various water-lubricated fixed geometry hydrodynamic journal bearings at zero load

Hydrodynamic journal bearing stability tests were conducted with 1.5 in. diameter, 1.5 in. long fixed geometry bearings in water at 80 F with zero load. Five fixed geometry bearings were rated in order of diminishing stability as follows: (1) three-tilted-lobe bearing (offset factor of 1.0), (2) herringbone-groove bearing, (3) one-segment, three-pod, shrouded Rayleigh-step bearing, (4) three-tilted-lobe journal with axial grooves (offset factor of 1.0) mated with a plain bearing, and (5) three-centrally-lobed bearing with axial grooves (offset factor of 0.5). The various parameters that affect the stability of each bearing configuration were investigated.

Schuller, F. T.↗

CNO abundances and hydrodynamic models of the nova outburst.

We have used a fully implicit, Lagrangian, hydrodynamic computer code incorporating a nuclear reaction network to follow thermonuclear runaways in the hydrogen-rich envelopes of white dwarfs in order to produce a nova outburst. Because of the short time-scales and the high nuclear burning rates produced in our models, the nuclear reactions are far out of equilibrium and the beta-plus unstable nuclei become the most abundant nuclei in the envelope except for hydrogen and helium. Our models have ejected 1.00017 solar mass with kinetic energies of 8 times 10 to the 44-th power ergs, a value that agrees quite closely with the observed values for novae.

Starrfield, S.↗

Self-acting and hydrodynamic shaft seals

Self-acting and hydrodynamic seals are described. The analytical procedures are outlined for obtaining a seal force balance and the operating film thickness. Particular attention is given to primary ring response (seal vibration) to rotating seat face runout. This response analysis revealed three different vibration modes. Proposed applications of self-acting seals in gas turbine engines and in rocket vehicle turbopumps are described. Also experimental data on self-acting face seals operating under simulated gas turbine conditions are given; these data show the feasibility of operating the seal at conditions of 345 newtons per square centimeter (500 psi) and 152 meters per second (500 ft/sec) sliding speed.

Ludwig, L. P.↗

Extended hydrodynamic theory of the peak and minimum pool boiling heat fluxes

The hydrodynamic theory of the extreme pool boiling heat fluxes is expanded to embrace a variety of problems that have not previously been analyzed. These problems include the prediction of the peak heat flux on a variety of finite heaters, the influence of viscosity on the Taylor and Helmoltz instability mechanisms with application to film boiling and to the peak heat flux in viscous liquids, the formalization of the analogy between high-current-density electrolysis and boiling, and the description of boiling in the low-gravity limit. The predictions are verified with a large number of new data.

Linehard, J. H.↗

Hydrodynamic prediction of peak pool-boiling heat fluxes from finite bodies.

Previous theoretical models are considered, giving attention to the original formulation proposed by Zuber (1959), an infinite horizontal flat plate, a horizontal cylinder, and a sphere. Some general features of any hydrodynamic prediction are inferred by examining the characteristics of the models. It is found possible to eliminate the need for observed values of the vapor-blanket thickness. The concepts obtained are utilized in the derivation of expressions for the prediction of the peak pool-boiling heat flux in the case of some new configurations.

Lienhard, J. H.↗

Self-acting and hydrodynamic shaft seals.

Self-acting and hydrodynamic seals are described. The analytical procedures are outlined for obtaining a seal force balance and the operating film thickness. Particular attention is given to primary ring response (seal vibration) to rotating seat face runout. This response analysis revealed three different vibration modes. Proposed applications of self-acting seals in gas turbine engines and in rocket vehicle turbopumps are described. Also experimental data on self-acting face seals operating under simulated gas turbine conditions are given; these data show the feasibility of operating the seal at conditions of 345 newtons per square centimeter (500 psi) and 152 meters per second (500 ft/sec) sliding speed.

Ludwig, L. P.↗

Studies of hydrodynamic events in stellar evolution. 3: Ejection of planetary nebulae

The dynamic behavior of the H-rich envelope (0.101 solar mass) of an evolved star (1.1 solar mass) as the luminosity rises to 19000 solar luminosity during the second ascent of the red giant branch. For luminosities in the range 3100 L 19000 solar luminosity the H-rich envelope pulsates like a long-period variable (LPV) with periods of the order of a year. As L reaches 19000 solar luminosity, the entire H-rich envelope is ejected as a shell with speeds of a few 10 km/s. The ejection occurs on a timescale of a few LPV pulsation periods. This ejection is associated with the formation of a planetary nebula. The computations are based on an implicit hydrodynamic computer code. T- and RHO-dependent opacities and excitation and ionization energies are included. As the H-rich envelope is accelerated off the stellar core, the gap between envelope and core is approximated by a vacuum, filled with radiation. Across the vacuum, the luminosity is conserved and the anisotropy of the radiation is considered as well as the solid angle subtended by the remnant star at the inner surface of the H-rich envelope. Spherical symmetry and the diffusion approximation are assumed.

Sparks, W. M.↗

Hydrodynamic water impact

The hydrodynamic impact of a falling body upon a viscous incompressible fluid was investigated by numerically solving the equations of motion. Initially the mathematical model simulated the axisymmetric impact of a rigid right circular cylinder upon the initially quiescent free surface of a fluid. A compressible air layer exists between the falling cylinder and the liquid free surface. The mathematical model was developed by applying the Navier-Stokes equations to the incompressible air layer and the incompressible fluid. Assuming the flow to be one dimensional within the air layer, the average velocity, pressure and density distributions were calculated. The liquid free surface was allowed to deform as the air pressure acting on it increases. For the liquid the normalized equations were expressed in two-dimensional cylindrical coordinates. The governing equations for the air layer and the liquid were expressed in finite difference form and solved numerically. For the liquid a modified version of the Marker-and-Cell method was used. The mathematical model has been reexamined and a new approach has recently been initiated. Essentially this consists of examining the impact of an inclined plate onto a quiesent water surface with the equations now formulated in cartesian coordinates.

Kettleborough, C. F.↗

Studies of hydrodynamic events in stellar evolution. III Ejection of planetary nebulae

Investigation of the dynamic behavior of the hydrogen-rich envelope (0.101 solar mass) of an evolved star (1.1 solar mass) as the luminosity rises to 19,000 solar luminosities during the second ascent of the red-giant branch. For luminosities in the range 3100 less than L less than 19,000 solar luminosities the H-rich envelope pulsates like a long-period variable (LPV) with periods of the order of a year. As L reaches 19,000 solar luminosities, the entire H-rich envelope is ejected as a shell with speeds of a few times 10 km sec. The ejection occurs on a time scale of a few LPV pulsation periods. This ejection is shown to be related to the formation of a planetary nebula. The computations are based on an implicit hydrodynamic computer code. Tand rho-dependent opacities and excitation and ionization energies are included. As the H-rich envelope is accelerated off the stellar core, the gap between envelope and core is approximated by a vacuum filled with radiation.

Kutter, G. S.↗

Effect of number of lobes and length-diameter ratio on stability of tilted-lobe hydrodynamic journal bearings at zero load

Hydrodynamic journal stability tests were conducted with tilted-lobe bearings. The bearings had three, five, and seven lobes and length to diameter (L/D) ratios from 0.2 to 1.0. They were tested in water and MIL-L-7808G oil at 294 K (70 F) at speeds to 5400 rpm with zero load. Stability was not appreciably affected by the number of lobes and decreased with a decrease in L/D ratio. However, a three-tilted-lobe bearing with an offset factor of 0.76 and an L/D of 0.5 was more stable than a three centrally lobed bearing with an offset factor of 0.50 and an L/D of 1.0.

Schuller, F. T.↗

Hydrodynamic instability of the solar nebula in the presence of a planetary core

When a planetary core composed of condensed matter accumulates in the primitive solar nebula, the gas in the nebula becomes gravitationally concentrated as an envelope about the planetary core. An analysis of models of such gaseous envelopes indicates that giant planets (such as Jupiter and Saturn) formed in a massive primitive solar nebula of the type constructed by Cameron and Pine (1973). When the mass of the accumulating planetary core becomes sufficiently great, the surrounding gaseous envelope will become hydrodynamically unstable against collapse onto the planetary core. Much of the surrounding gas also may be compressed onto the core by the background pressure of the gas.

Perri, F.↗

Time-dependent hydrodynamic phenomena in the envelopes of the Be stars

Temporal and angular variations in the motion and distribution of circumstellar material about Be stars are studied by means of a simple hydrodynamical approach. The flow variables are each written as the sum of a known, steady-state axisymmetric term and a smaller component which contains both temporal and angular dependence. Substitution of these dichotomous expressions for the flow variables into Euler's equation and the continuity equation leads to a set of linearized equations for the terms which depend on time and angle. Solutions can be found to a somewhat approximated version of the linearized equations, and these solutions explain the qualitative features of the observed short-time variations.

Morgan, T. H.↗

Hydrodynamic models of a Cepheid atmosphere. I - Deep envelope models

The implicit hydrodynamic code of Kutter and Sparks has been modified to include radiative transfer effects. This modified code has been used to compute deep envelope models of a classical Cepheid with a period of 12 days. It is shown that in this particular model the hydrogen ionization region plays only a small role in producing the observed phase lag between the light and velocity curves. The cause of the bumps on the model's light curve is examined, and a mechanism is presented to explain those Cepheids with two secondary features on their light curves. This mechanism is shown to be consistent with the Hertzsprung sequence only if the evolutionary mass-luminosity law is used.

Karp, A. H.↗

Revitalizing the hydrodynamic support for space shuttle

The condition of the equipment retained from the Saturn V hydrodynamic support (HDS) is described along with the work necessary to supplement, modify, and refurbish it for the space shuttle mated vehicle ground vibration test (MVGVT). The design changes necessary to adapt the Saturn V HDS design for the space shuttle are described and the results of the inventory and inspection are given.

Sholes, G.↗

Solution of a large hydrodynamic problem using the STAR-100 computer

A representative hydrodynamics problem, the shock initiated flow over a flat plate, was used for exploring data organizations and program structures needed to exploit the STAR-100 vector processing computer. A brief description of the problem is followed by a discussion of how each portion of the computational process was vectorized. Finally, timings of different portions of the program are compared with equivalent operations on serial machines. The speed up of the STAR-100 over the CDC 6600 program is shown to increase as the problem size increases. All computations were carried out on a CDC 6600 and a CDC STAR 100, with code written in FORTRAN for the 6600 and in STAR FORTRAN for the STAR 100.

Weilmuenster, K. J.↗

Hydrodynamic models of a Cepheid atmosphere. III - Line spectrum and radius determinations

Line profiles are computed on the basis of the moving atmospheres from the hydrodynamic models investigated by Karp (1975). It is found that the velocity gradients in the atmosphere can be used to explain the apparent, slightly supersonic microturbulence. The total observed microturbulence is seen to be consistent with the linear sum of the classical microturbulence and that caused by the velocity gradients.

Karp, A. H.↗

Acoustic waves in the solar atmosphere. I - The hydrodynamic code

This paper studies large-amplitude radiatively damped acoustic waves in the solar atmosphere. A modified method of characteristics is described for the solution of the time-dependent hydrodynamic equations in a gravitational atmosphere. A procedure for the detection of shocks is outlined. Several tests of the accuracy of the method are described. The evolution of the wave and the height of shock formation are computed for several values of the period and the initial acoustic flux in isothermal atmospheres with temperatures of 4000 and 5000 K as well as in a model solar atmosphere.

Ulmschneider, P.↗

Experimental and analytical separation of hydrodynamic, entropy and combustion noise in a gas turbine combustor

This paper deals with noise sources which are central to the problem of core engine noise in turbopropulsion systems. The sources dealt with are entropy noise and direct combustion noise, as well as a non-propagating psuedosound which is hydrodynamic noise. It is shown analytically and experimentally that a transition can occur from a combustion noise dominant situation to an entropy noise dominant case if the contraction of a terminating nozzle to the combustor is high enough. In the combustor tested, entropy noise is the dominant source for propagational noise if the combustor is choked at the exit. Analysis techniques include spectral, cross spectral, cross correlation, and ordinary and partial coherence analysis. Measurements include exterior and interior fluctuating and mean pressures and temperatures.

Muthukrishnan, M.↗