Search NASA⌕ Search

SEARCH · Search NASA

Results for “HYPERSONIC BOUNDARY LAYER”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

Assessment of a transitional boundary layer theory at low hypersonic Mach numbers

An investigation was carried out to assess the accuracy of a transitional boundary layer theory in the low hypersonic Mach number regime. The theory is based upon the simultaneous numerical solution of the boundary layer partial differential equations for the mean motion and an integral form of the turbulence kinetic energy equation which controls the magnitude and development of the Reynolds stress. Comparisions with experimental data show the theory is capable of accurately predicting heat transfer and velocity profiles through the transitional regime and correctly predicts the effects of Mach number and wall cooling on transition Reynolds number. The procedure shows promise of predicting the initiation of transition for given free stream disturbance levels. The effects on transition predictions of the pressure dilitation term and of direct absorption of acoustic energy by the boundary layer were evaluated.

Shamroth, S. J.↗
NASA NTRS1992

A study of hypersonic swept shock wave/turbulent boundary layer interactions using a conical Navier-Stokes code

A computational study has been performed of sharp fin-induced swept shock wave/turbulent boundary layer interactions at low hypersonic Mach numbers. The objective was to determine if results obtained using a conical Navier-Stokes code, particularly the peak heating and pressure, are adequate for engineering predictions. The advantage of the conical approach is that the problem becomes two-dimensional and requires much less computational effort than a fully three-dimensional calculation. In this code, the standard Baldwin-Lomax model is used for turbulent closure and its performance is studied in some detail. To assess the approach interactive flowfields generated by unswept sharp fins at two angles of attack at each of three hyprsonic freestream Mach numbers (5, 6, 11) have been calculated and the results compared with experimental wall pressure and heat transfer data. Although the conical Navier-Stokes/Baldwin-Lomax approach is reasonably successful at Mach numbers up to 5, the performance deteriorates as the Mach number is increased. Nevertheless, the approach could be a valuable tool in preliminary parametric design studies.

Rodi, Patrick E.↗
NASA NTRS2007

Boundary Layer Transition Experiments in Support of the Hypersonics Program

Two experimental boundary layer transition studies in support of fundamental hypersonics research are reviewed. The two studies are the HyBoLT flight experiment and a new ballistic range effort. Details are provided of the objectives and approach associated with each experimental program. The establishment of experimental databases from ground and flight are to provide better understanding of high-speed flows and data to validate and guide the development of simulation tools.

Berry, Scott A.↗
NASA NTRS1989

Documentation of Two- and Three-Dimensional Hypersonic Shock Wave/Turbulent Boundary Layer Interaction Flows

Experimental data for a series of two- and three-dimensional shock wave/turbulent boundary layer interaction flows at Mach 7 are presented. Test bodies, composed of simple geometric shapes, were designed to generate flows with varying degrees of pressure gradient, boundary-layer separation, and turning angle. The data include surface-pressure and heat-transfer distributions as well as limited mean-flow-field surveys in both the undisturbed and the interaction regimes. The data are presented in a convenient form for use in validating existing or future computational models of these generic hypersonic flows.

Kussoy, Marvin I.↗
NASA NTRS2011

Boundary Layer Transition over Blunt Hypersonic Vehicles Including Effects of Ablation-Induced Out-Gassing

Computations are performed to study the boundary layer instability mechanisms pertaining to hypersonic flow over blunt capsules. For capsules with ablative heat shields, transition may be influenced both by out-gassing associated with surface pyrolysis and the resulting modification of surface geometry including the formation of micro-roughness. To isolate the effects of out-gassing, this paper examines the stability of canonical boundary layer flows over a smooth surface in the presence of gas injection into the boundary layer. For a slender cone, the effects of out-gassing on the predominantly second mode instability are found to be stabilizing. In contrast, for a blunt capsule flow dominated by first mode instability, out-gassing is shown to be destabilizing. Analogous destabilizing effects of outgassing are also noted for both stationary and traveling modes of crossflow instability over a blunt sphere-cone configuration at angle of attack.

Li, Fei↗
NASA NTRS2014

On Parametric Sensitivity of Reynolds-Averaged Navier-Stokes SST Turbulence Model: 2D Hypersonic Shock-Wave Boundary Layer Interactions

Examined is sensitivity of separation extent, wall pressure and heating to variation of primary input flow parameters, such as Mach and Reynolds numbers and shock strength, for 2D and Axisymmetric Hypersonic Shock Wave Turbulent Boundary Layer interactions obtained by Navier-Stokes methods using the SST turbulence model. Baseline parametric sensitivity response is provided in part by comparison with vetted experiments, and in part through updated correlations based on free interaction theory concepts. A recent database compilation of hypersonic 2D shock-wave/turbulent boundary layer experiments extensively used in a prior related uncertainty analysis provides the foundation for this updated correlation approach, as well as for more conventional validation. The primary CFD method for this work is DPLR, one of NASA's real-gas aerothermodynamic production RANS codes. Comparisons are also made with CFL3D, one of NASA's mature perfect-gas RANS codes. Deficiencies in predicted separation response of RANS/SST solutions to parametric variations of test conditions are summarized, along with recommendations as to future turbulence approach.

Hypersonic↗
NASA NTRS1981

A survey of heating and turbulent boundary layer characteristics of several hypersonic research aircraft configurations

Four of the configurations investigated during a proposed NASA-Langley hypersonic research aircraft program were selected for phase-change-paint heat-transfer testing and forebody boundary layer pitot surveys. In anticipation of future hypersonic aircraft, both published and unpublished data and results are reviewed and presented with the purpose of providing a synoptic heat-transfer data base from the research effort. Engineering heat-transfer predictions are compared with experimental data on both a global and a local basis. The global predictions are shown to be sufficient for purposes of configuration development, and even the local predictions can be adequate when interpreted in light of the proper flow field. In that regard, cross flow in the forebody boundary layers was examined for significant heating and aerodynamic effect on the scramjet engines. A design philosophy which evolved from the research airplane effort is used to design a forebody shape that produces thin, uniform, forebody boundary layers on a hypersonic airbreathing missile. Finally, heating/boundary layer phenomena which are not predictable with state-of-the-art knowledge and techniques are shown and discussed.

Lawing, P. L.↗
NASA NTRS1991

Evaluation of a technique to generate artificially thickened boundary layers in supersonic and hypersonic flows

The feasibility of using a contoured honeycomb model to generate a thick boundary layer in high-speed, compressible flow was investigated. The contour of the honeycomb was tailored to selectively remove momentum in a minimum of streamwise distance to create an artificially thickened turbulent boundary layer. Three wind tunnel experiments were conducted to verify the concept. Results indicate that this technique is a viable concept, especially for high-speed inlet testing applications. In addition, the compactness of the honeycomb boundary layer simulator allows relatively easy integration into existing wind tunnel model hardware.

Porro, A. R.↗
NASA NTRS1983

Shuttle Orbiter boundary-layer transition - A comparison of flight and wind tunnel data

Hypersonic boundary-layer transition data obtained on the windward centerline of the Shuttle Orbiter during entry for the first four flights are presented and analyzed. Because the Orbiter surface is composed of a large number of thermal protection tiles, the transition data include the effects of distributed roughness arising from tile misalignment and gaps. These data are used as a benchmark for assessing and improving the accuracy of boundary-layer transition predictions based on correlations of wind tunnel data taken on both aerodynamically rough and smooth Orbiter surfaces. By comparing these two data bases, the relative importance of tunnel free-stream noise and surface roughness on Orbiter boundary-layer transition correlation parameters can be assessed. This assessment indicates that accurate predictions of transition times can be made for the Orbiter at hypersonic flight conditions by using roughness dominated wind tunnel data. Specifically, times of transition onset and completion can be accurately predicted using a correlation based on critical and effective values of a roughness Reynolds number previously derived from wind tunnel data.

Goodrich, W. D.↗
NASA NTRS1992

Hypersonic flow separation in shock wave boundary layer interactions

An assessment is presented for the experimental data on separated flow in shock wave turbulent boundary layer interactions at hypersonic and supersonic speeds. The data base consists mainly of two dimensional and axisymmetric interactions in compression corners or cylinder-flares, and externally generated oblique shock interactions with boundary layers over flat plates or cylindrical surfaces. The conditions leading to flow separation and the subsequent changes in the flow empirical correlations for incipient separation are reviewed. The effects of the Mach number, Reynolds number, surface cooling and the methods of detecting separation are discussed. The pertinent experimental data for the separated flow characteristics in separated turbulent boundary layer shock interaction are also presented and discussed.

Hamed, A.↗
NASA NTRS1987

Stability of axisymmetric boundary layers on sharp cones at hypersonic Mach numbers

The stability of sharp-cone boundary layers at zero angle of attack is investigated. Standard linear stability theory is used to perform a numerical study at an edge Mach number M(e) of 6.8 of normal-mode stability characteristics on an adiabatic-wall cone with special reference to the conditions of the stability experiment of Stetson et al. (1983). Comparisons of the calculations with experimental measurements bring out major areas of disagreement which remain to be resolved even in this simple case. Finally, a series of calculations of both cone and flat-plate N factors at M(e) of 4.5, 5.8, and 6.8 is used to study the relation between transition on a cone and flat plate based on stability theory.

Mack, Leslie M.↗