Search NASA⌕ Search

SEARCH · Search NASA

Results for “High Temperature Methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

Synthesis and photoluminescence control of Ca{sub 10.5–1.5x}La{sub x}(PO{sub 4}){sub 7}:Eu{sup 2+} phosphors by aliovalent cation substitution

A range of Ca{sub 10.5-1.5x}La{sub x}(PO{sub 4}){sub 7}:Eu{sup 2+}phosphors were synthesized by high temperature solid state method. Subsequently we studied the crystal structures and luminescent properties through X-ray diffraction, photoluminescence and photoluminescence excitation, diffuse reflection spectra, Raman spectra and decay curves systematically. Based on the special crystal structure ofβ-Ca{sub 3}(PO{sub 4}){sub 2}:Eu{sup 2+}, its emission undergoes a variation from violet–blue to cyan through introducing La{sup 3+}. The substitution of La{sup 3+} for Ca{sup 2+} could form some cation vacancies in Ca(4) sites according to the scheme 3Ca{sup 2+}= 2La{sup 3+}+ □ due to the different ion valence, which compels Eu{sup 2+} to migrate from Ca(4) site to other sites. Additionally, the formation of the cation vacancies can further reduce the thermal stability of phosphors. - Highlights: • Realizing photoluminescence control of Eu{sup 2+} by introducing relatively larger La{sup 3+} ion to replace the Ca{sup 2+} in β-Ca{sub 3}(PO{sub 4}){sub 2}:Eu{sup 2+} phosphor. • The mechanism of spectral control is proposed to be due to emptying of Ca{sup 2+} and migration of Eu{sup 2+}. • The thermal stability reduction is related to the formation of vacancies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Two new barium indium phosphates with intersecting tunnel structures: BaIn{sub 2}P{sub 4}O{sub 14}, and Ba{sub 3}In{sub 2}P{sub 4}O{sub 16}

Two new barium indium phosphates BaIn{sub 2}P{sub 4}O{sub 14} and Ba{sub 3}In{sub 2}P{sub 4}O{sub 16} were synthesized by high temperature solution growth method and structurally characterized by single crystal X-ray diffraction analysis. They represent first compounds in the Ba-In-P-O systems. BaIn{sub 2}P{sub 4}O{sub 14} and Ba{sub 3}In{sub 2}P{sub 4}O{sub 16} display different types of 3D architectures. The projections of both structures concern about the existence of the intersecting tunnels. In compound BaIn{sub 2}P{sub 4}O{sub 14}, the tunnels are built up of the corner-sharing InO{sub 6} octahedra and P{sub 2}O{sub 7} groups, whereas in compound Ba{sub 3}In{sub 2}P{sub 4}O{sub 16}, they are formed by corner sharing of PO{sub 4} tetrahedra and InO{sub 6} octahedra. The electronic band structure calculations of two compounds have been performed with the density functional theory method. The study of calculations and optical diffuse reflectance experimental results show both compounds are insulators with direct band-gap.

36 MATERIALS SCIENCE↗

Ba{sub 2}B{sub 2}O{sub 5}:Ce{sup 3+}: A novel blue emitting phosphor for white LEDs

Graphical abstract: Under the 350 nm radiation excitation, Ba{sub 2}B{sub 2}O{sub 5}:Ce{sup 3+} has a broad blue emission band. When the temperature turned up to 150 °C, the emission intensity of Ba{sub 1.97}B{sub 2}O{sub 5}:0.03Ce{sup 3+} is 63.4% of the initial value at room temperature. The activation energy ΔE is calculated to be 0.25 eV, which prove the good thermal stability of Ba{sub 2}B{sub 2}O{sub 5}:Ce{sup 3+}. All the properties indicate that Ba{sub 2}B{sub 2}O{sub 5}:Ce{sup 3+} may have potential application in white LEDs. - Highlights: • Ba{sub 2}B{sub 2}O{sub 5}:Ce{sup 3+} has a broad blue emission band under the 350 nm radiation excitation. • Emission intensity of Ba{sub 2}B{sub 2}O{sub 5}:Ce{sup 3+} is 63.4% (150 °C) of the initial value (30 °C). • The activation energy ΔE for thermal quenching is 0.25 eV. - Abstract: A novel blue emitting phosphor Ba{sub 2}B{sub 2}O{sub 5}:Ce{sup 3+} is synthesized by a high temperature solid state method. The luminescent property and the thermal stability of Ba{sub 2}B{sub 2}O{sub 5}:Ce{sup 3+} are investigated. Under the 350 nm radiation excitation, Ba{sub 2}B{sub 2}O{sub 5}:Ce{sup 3+} has a broad blue emission band, and the peak locates at 417 nm which is assigned to the 5d{sup 1}–4f{sup 1} transition of Ce{sup 3+}. It is further proved that the dipole–dipole interaction results in the concentration quenching of Ce{sup 3+} in Ba{sub 2}B{sub 2}O{sub 5}:Ce{sup 3+}. When the temperature turned up to 150 °C, the emission intensity of Ba{sub 1.97}B{sub 2}O{sub 5}:0.03Ce{sup 3+} is 63.4% of the initial value at room temperature. The activation energy ΔE is calculated to be 0.25 eV, which prove the good thermal stability of Ba{sub 2}B{sub 2}O{sub 5}:Ce{sup 3+}. All the properties indicate that Ba{sub 2}B{sub 2}O{sub 5}:Ce{sup 3+} may have potential application in white LEDs.

36 MATERIALS SCIENCE↗

Structural and optical effects induced by gamma irradiation on NdPO{sub 4}: X-ray diffraction, spectroscopic and luminescence study

Highlights: • Inorganic NdPO{sub 4} crystal was grown first time using potassium polyphosphate (K{sub 6}P{sub 4}O{sub 13}) flux. • NdPO{sub 4} crystal is insoluble in water, non-hygroscopic and high radiation resistance favoring for actinides host. • Actinide immobilization can be made at 1273 K. • High yield of 1061 nm photon emission. - Abstract: Rare earth orthophosphate (NdPO{sub 4}) monazite single crystals were grown using high temperature flux growth method employing K{sub 6}P{sub 4}O{sub 13} (K{sub 6}) as molten solvent. Their structural parameters were studied using single crystal X-ray diffraction (XRD) method. The grown crystals were examined by SEM and EDX techniques for their homogeniousity and inclusion in the crystals. The influence of gamma irradiation in structural and optical absorption properties were studied by the powder XRD, FTIR and reflectance spectroscopy. The effect of gamma irradiation on luminescence properties was recorded. No significant structural change is observed up to 150 kGy gamma dose. The gamma ray induced charge trap in the crystal was saturated to 40 kGy dose. The luminescence intensity decreases with an increase in the irradiation. The emission of luminescence intensity stabilizes above 40 kGy gamma dose.

36 MATERIALS SCIENCE↗

Ultra-pure nickel for structural components of low-radioactivity instruments

The next generation of nuclear and particle physics rare-event search experiments demand structural materials combining ultra-low levels of radioactive contamination with exceptional mechanical strength. Here, this study evaluates chemical vapor deposition (CVD) nickel as a low radioactive background candidate structural material for such applications. Manufacturer-supplied CVD Ni grown on aluminum substrates was assayed via inductively coupled plasma mass spectrometry (ICP-MS) employing isotope-dilution. These material assays produced measured bulk concentration of 232 Th, 238 U, and nat K at the levels of ~70 ppq, ≲100 ppq, and ~900 ppt, respectively, which is the lowest reported in nickel. Surface-etch profiling uncovered higher concentrations of these contaminants extending ~10 μ m beneath the surface, likely associated with the aluminum growth substrate. Additionally, the CVD Ni underwent tensile testing alongside standard Ni samples. CVD Ni exhibited a planar tensile strength of ~600 MPa, significantly surpassing standard nickel. However, heat treatment was found to reduce the tensile strength to levels comparable to standard Ni, with implications for high-temperature weld joining methods. The results reported are compared to the one other well documented usage of CVD Ni in a low radioactive background physics research experiment and a discussion is provided on how the currently reported results may arise from changes in CVD fabrication or testing process. These results establish CVD Ni as a promising low-radioactivity structural material, while outlining the need for further development in surface cleaning and weld-joining techniques to fully realize its potential in large-scale, low radioactive background rare-event search experiments.

47 OTHER INSTRUMENTATION↗

Magnetic Ground State Crossover in a Series of Glaserite Systems with Triangular Magnetic Lattices

The magnetic properties are reported for three members of the glaserite series of compounds, Na 2 BaM(VO 4 ) 2 , M = Mn, Mn 0.6 Co 0.4 , and Co. Large single crystals are grown using a high-temperature hydrothermal synthesis method. This structure type exhibits a triangular magnetic lattice in which M 2+ O 6 octahedra are interconnected with nonmagnetic (VO 4 ) 3– groups. All the structures crystallize at room temperature with rigid trigonal symmetry (space group $P\bar{3m}1$); however, at lower temperatures both Na 2 BaMn(VO 4 ) 2 and Na 2 BaMn 0.6 Co 0.4 (VO 4 ) 2 undergo a structural transition to lower symmetry (monoclinic, C2/c). The bulk magnetic measurements indicate that Mn- and Co-structures are antiferromagnetic and ferromagnetic, respectively. Na 2 BaMn 0.6 Co 0.4 (VO 4 ) 2 does not show any long-range ordering down to 0.5 K, although a broad heat capacity anomaly near 1.2 K suggests short-range magnetic order or freezing into a spin-glass-like state related to the chemical disorder and resulting competing magnetic interactions. The magnetic structures of Na 2 BaMn(VO 4 ) 2 and Na 2 BaCo(VO 4 ) 2 were determined using neutron powder diffraction. At zero magnetic field, Na 2 BaMn(VO 4 ) 2 possesses an antiferromagnetic structure with the moments ordered in a Néel-type arrangement and aligned along the C 4 axis of the octahedra. Under applied magnetic field at 0.3 K, the evolution of the magnetic structure toward a fully polarized state is observed. Na 2 BaCo(VO 4 ) 2 represents a ferromagnetic (FM) magnetic structure with Co moments aligned parallel to the c-axis direction. Finally, the relationships between these structures and magnetic properties are discussed.

36 MATERIALS SCIENCE↗

Anthropogenic Contributions to the 2021 Pacific Northwest Heatwave

Abstract Daily maximum temperatures during the 2021 heatwave in the Pacific Northwest United States and Canada shattered century old records. Multiple causal factors, including anthropogenic climate change, contributed to these high temperatures, challenging traditional methods of attributing human influence. We demonstrate that the observed 2021 daily maximum temperatures are far above the bounds of Generalized Extreme Value distributions fitted from historical data. Hence, confidence in Granger causal inference statements about the human influence on this heatwave is low. Alternatively, we present a more conditional hindcast attribution study using two regional models. We performed ensembles of simulations of the heatwave to investigate how the event would have changed if it had occurred without anthropogenic climate change and with future warming. We found that global warming caused a ∼0.8°C–1°C increase in heatwave temperatures. Future warming would lead to a ∼5°C increase in heatwave temperature by the end of the 21st century.

54 ENVIRONMENTAL SCIENCES↗

Learning reduced kinetic Monte Carlo models of complex chemistry from molecular dynamics

Here, we propose a novel statistical learning framework for automatically and efficiently building reduced kinetic Monte Carlo (KMC) models of large-scale elementary reaction networks from data generated by a single or few molecular dynamics simulations (MD). Existing approaches for identifying species and reactions from molecular dynamics typically use bond length and duration criteria, where bond duration is a fixed parameter motivated by an understanding of bond vibrational frequencies. Conversely, we show that for highly reactive systems, bond duration should be a model parameter that is chosen to maximize the predictive power of the resulting statistical model. We demonstrate our method on a high temperature, high pressure system of reacting liquid methane, and show that the learned KMC model is able to extrapolate more than an order of magnitude in time for key molecules. Additionally, our KMC model of elementary reactions enables us to isolate the most important set of reactions governing the behavior of key molecules found in the MD simulation. We develop a new data-driven algorithm to reduce the chemical reaction network which can be solved either as an integer program or efficiently using L1 regularization, and compare our results with simple count-based reduction. For our liquid methane system, we discover that rare reactions do not play a significant role in the system, and find that less than 7% of the approximately 2000 reactions observed from molecular dynamics are necessary to reproduce the molecular concentration over time of methane. Furthermore, we describe a framework in this work that paves the way towards a genomic approach to studying complex chemical systems, where expensive MD simulation data can be reused to contribute to an increasingly large and accurate genome of elementary reactions and rates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Annealing effect on the particle size and chemical composition of activated carbon obtained from vacuum furnace of teak sawdust

Activated carbon was produced from sawdust by using physical method in a high temperature vacuum furnace without additional chemical. Fast pyrolysis process was carried out prior in fluidized a bed furnace to produce char before activation process. Experiments were conducted to investigate the influence of various process parameters such as particle size, activation temperature and activation time on the quality of the activated carbon. In addition, the chemical composition studies were done by using x-ray fluorescence (XRF) spectroscopy. The crystallite sizes were calculated by using Scherer equation based on x-ray diffraction (XRD) spectroscopy data. The pyrolysis temperature and time were varied from 600°C to 900°C and from 3 hours to 6 hours, respectively. The particle size of activated carbon was increase with increasing temperature. The composition and crystallite size of the prepared activated carbon was compared with the non-activated carbon. The results indicated that the teak sawdust carbon could be employed as a low cost alternative to produce commercial activated carbon.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The effect of Tb{sup +3} on α-Sr{sub 2}P{sub 2}O{sub 7} phosphor for green LED phosphor application

A series of Tb{sup +3} activated α-Sr{sub 2}P{sub 2}O{sub 7} (Strontium Pyrophosphate) phosphors were synthesized by high temperature combustion synthesis method. The structural analysis has been done by x-ray diffraction and FTIR (Fourier Transform Infrared Spectrum). The results obtained in structural characterization indicate that the doping concentration did not affect the crystal phase and structure of the phosphors. X-ray diffraction pattern reveals that the all samples were consistence with the JCPDS card No. 24-1011. The phosphor was excited at 232 nm wavelength, very intense PL green emission peak have been observed at 545 nm. This illustrates, that the phosphors could be efficiently excited because of the charge transfer band of the host as well as the energy transfer process occurred between host (Sr{sub 2}P{sub 2}O{sub 7}) and activator (Tb{sup +3}). By increasing the doping concentration of Tb{sup +3}, the intensity of 545 nm emission peak has been increased predominantly and it suggest that the phosphor prepared has very good application in green LED phosphor.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Nd{sub 2±x}Zr{sub 2∓x}O{sub 7±x/2} (−0.2≤x≤0.4) complex oxides: Effect of anion disorder on ionic conductivity

In the present work, a series of Nd{sub 2±x}Zr{sub 2∓x}O{sub 7±x/2} (−0.2≤x≤0.4) was prepared by self assisted gel-combution method followed by high temperature sintering at 1673 K. Thorough structural characterizations were done by X-ray diffraction and Raman spectroscopic techniques. The nominal compositions Nd{sub 1.6}Zr{sub 2.4}O{sub 7.2} and Nd{sub 1.8}Zr{sub 2.2}O{sub 7.1} were found to possess single-phasic pyrochlore structure whereas Nd{sub 2.0}Zr{sub 2.0}O{sub 7} and Nd{sub 2.2}Zr{sub 1.8}O{sub 6.9} consisted of a pyrochlore phase and a small amount of hexagonal Nd{sub 2}O{sub 3} as an impurity phase. Electrical behavior of the samples was examined by AC impedance analysis. Even though the activation energies of all the samples are not very different, a high pre-exponential factor for the Nd{sub 1.6}Zr{sub 2.4}O{sub 7.2} composition resulted in high ionic conductivity (3.37 × 10{sup −3} Scm{sup −1} at 773 K). This high ionic conductivity value makes it a superior candidate as an electrolyte material for SOFC applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The mechanism of hydroxyapatite coatings degradation at high substrate temperatures

Physical vapor deposition methods used for hydroxyapatite (HA) coatings typically require elevated substrate temperatures and post-deposition annealing to induce crystallization. However, such thermal treatments can degrade both the mechanical integrity and bioactivity of the coating, particularly when substrate temperatures exceed 500 °C. The mechanisms underlying these phenomena remain insufficiently understood. In this study, HA thin films were deposited on silicon and Ti6Al4V substrates using pulsed laser deposition and were systematically characterized to elucidate these mechanisms. XPS and SIMS analyses revealed a temperature-dependent loss of OH − and PO 4 3− groups, an increased Ca/P ratio, and the formation of interfacial oxides, all of which contribute to weakened adhesion. To clarify the temperature-dependent decline in bioactivity, protein adsorption behavior was analyzed using a Kramers-type kinetic framework; the fitted desorption kinetics indicate that coatings deposited near ∼500 °C provide the most stable protein attachment, whereas higher temperatures accelerate desorption due to dehydroxylation and carbonate substitution. Together, these findings provide mechanistic insight into the thermal degradation of HA coatings and offer a framework for optimizing deposition parameters to preserve stoichiometry, adhesion, and bioactivity for long-term biomedical applications.

Kylychbekov, Salizhan [Univ. of Oxford (United Kin↗

First-order phase transition to a nonmagnetic ground state in nonsymmorphic NbCrP

Here, we report the discovery of a first-order phase transition at around 125 K in NbCrP, which is a nonsymmorphic crystal with the P n m a space group. From the resistivity, magnetic susceptibility, and nuclear magnetic resonance measurements using crystals made by the Sn-flux method, the high-temperature (HT) phase is characterized to be metallic with a non-negligible magnetic anisotropy. The low-temperature (LT) phase is also found to be a nonmagnetic metallic state with a crystal of lower symmetry. In the LT phase, the spin susceptibility is reduced by ~30 % from that in the HT phase, suggesting that the phase transition is triggered by the electronic instability. The possible origin of the phase transition in NbCrP is discussed based on the electronic structure by comparing it with those in other nonsymmorphic compounds, RuP and RuAs.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Data-centric framework for crystal structure identification in atomistic simulations using machine learning

Atomic-level modeling performed at large scales enables the investigation of mesoscale materials properties with atom-by-atom resolution. The spatial complexity of such cross-scale simulations renders them unsuitable for simple human visual inspection. Instead, specialized structure characterization techniques are required to aid interpretation. These have historically been challenging to construct, requiring significant intuition and effort. Here we propose an alternative framework for a fundamental structural characterization task: classifying atoms according to the crystal structure to which they belong. Our approach is data-centric and favors the employment of Machine Learning over heuristic rules of classification. A group of data-science tools and simple local descriptors of atomic structure are employed together with an efficient synthetic training set. We also introduce the first standard and publicly available benchmark data set for evaluation of algorithms for crystal-structure classification. Further, it is demonstrated that our data-centric framework outperforms all of the most popular heuristic methods—especially at high temperatures when lattices are the most distorted—while introducing a systematic route for generalization to new crystal structures. Moreover, through the use of outlier detection algorithms our approach is capable of discerning between amorphous atomic motifs (i.e., noncrystalline phases) and unknown crystal structures, making it uniquely suited for exploratory materials synthesis simulations.

36 MATERIALS SCIENCE↗

Computational Design and Experimental Validation of New Thermal Barrier Systems

The focus of this project is on the development of a reliable and efficient ab initio based computational high temperature material design method which can be used to assist the Thermal Barrier Coating (TBC) bond-coat and top-coat design. Experimental evaluations on the new TBCs are conducted to confirm the new TBCs’ properties. Southern University is the subcontractor on this project with a focus on the computational simulation method development. We have performed ab initio density functional theory (DFT) method and molecular dynamics simulation on screening the top coats and bond coats for gas turbine thermal barrier coating design and validation applications. For experimental validations, our focus is on the hot corrosion performance of different TBC systems. For example, for one of the top coatings studied, we examined the thermal stability of TaZr 2.75 O 8 and confirmed it’s hot corrosion performance.

36 MATERIALS SCIENCE↗

Design of a high power TM01 mode launcher optimized for manufacturing by milling

Recent research on high-gradient rf acceleration found that hard metals, such as hard copper and hard copper-silver, have lower breakdown rate than soft metals. Traditional high-gradient accelerating structures are manufactured with parts joined by high-temperature brazing. The high temperature used in brazing makes the metal soft; therefore, this process cannot be used to manufacture structures out of hard metal alloys. In order to build the structure with hard metals, the components must be designed for joining without high-temperature brazing. One method is to build the accelerating structures out of two halves, and join them by using a low-temperature technique, at the symmetry plane along the beam axis. The structure has input and output rf power couplers. We use a TM01 mode launcher as a rf power coupler, which was introduced during the Next Linear Collider (NLC) work. The part of the mode launcher will be built in each half of the structure. This paper presents a novel geometry of a mode launcher, optimized for manufacturing by milling. The coupler was designed for the CERN CLIC working frequency f = 11.9942 GHz; the same geometry can be scaled to any other frequency.

36 MATERIALS SCIENCE↗

DEVELOPMENT OF REACTION-DRIVEN IONIC TRANSPORT MEMBRANES (ITMs) TECHNOLOGY: PHASE IV/BUDGET PERIOD 6 “Development of ITM Oxygen Technology for Integration in IGCC and Other Advanced Power Generation Systems”

Air Products and Chemicals, along with development participants and in association with the U.S. Department of Energy, has made substantial progress in developing a novel air separation technology. Unlike conventional cryogenic processes, this method uses high-temperature ceramic membranes to produce high-purity oxygen. The membranes selectively transport oxygen ions with high flux and infinite theoretical selectivity. Reaction-driven ceramic membranes are fabricated from non-porous, multi-component metallic oxides, operate at temperatures typically over 700°C, and have exceptionally high oxygen flux and selectivity. Oxygen from low-pressure air permeates as oxygen ions through the ceramic membrane and is consumed through chemical reactions, thus creating a chemical driving force that pulls oxygen ions across the membrane at high rates. The oxygen reacts with a hydrocarbon fuel in a partial oxidation process to produce a hydrogen and carbon monoxide mixture – synthesis gas. This project expands the partial-oxidation scope of ITM technology beyond natural gas feed and investigates the potential for ITM reaction-driven technology to be used in conjunction with gasification and pyrolysis technologies to provide more economical routes for producing hydrogen and synthesis gas. This report presents an overview of the ITM reaction-driven development effort, including ceramic materials development, fabrication and testing of small-scale ceramic modules, ceramic modeling, and the investigation of gasifier integration schemes

David, Studer↗

High temperature superconducting magnet

Systems and methods for superconducting magnets are disclosed, such systems and methods comprising a primary coil and short-circuited secondary coil. The secondary coil can be made from a stack of superconducting tapes having longitudinal cuts forming closed superconductor loops without splices. The primary coil is used to pump the current into the secondary coil where it circulates continuously generating a permanent magnetic field.

Kashikhin, Vladimir↗