Search NASA⌕ Search

SEARCH · Search NASA

Results for “Hydrodynamic codes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Preheat effects in laser-driven Rayleigh–Taylor instability experiments at intensities greater than $10^{15}$ $\textrm{W}$ $\textrm{cm}^{-2}$ at OMEGA EP and the NIF

The propagation of high-energy X-rays or hot electrons have the potential to alter the initial conditions in experimental target designs, especially at material interfaces, for laser-driven inertial confinement fusion (ICF) and high-energy density (HED) experimental platforms. Hot-electron preheat can drastically modify the initial conditions of experimental targets used to study the deceleration-stage Rayleigh–Taylor instability (RTI) both with and without applied magnetic fields. Therefore, it is necessary to understand and quantify the impact of hot-electron preheat. The hydrodynamic (HD) capabilities in the Ares code are used to study the effects varying levels of preheat can have on RTI evolution. The experimental and computational studies presented in this work demonstrate that at high laser intensities of around or greater than 10 15 W cm −2 , there is hot-electron generation from laser plasma instabilities which induces substantial preheat and impacts the morphology of RTI evolution and even inhibits the intended RTI growth such that it is not observable experimentally. The necessity of better quantifying hot-electron induced preheat and mitigating its impact on such high-intensity direct-drive laser experiments in the future is discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Measurement and Modeling of Electron Temperature in Laboratory Photoionized Plasmas Relevant to Astrophysics

The electron temperature of photoionized plasmas characterizes the thermalization of photoelectrons, impacts the charge-state distribution, emissivity, and opacity through atomic recombination processes, and is needed to perform detailed comparisons with theory predictions. We discuss temperature measurements in laboratory photoionized plasmas and a comparison with model calculations done with several theory approximations and codes. These include a radiation-hydrodynamics simulation and two nonequilibrium heating and ionization models that tracked the evolution of the internal energy of the electrons. Furthermore, for the same physics model and X-ray flux time history, calculations were performed assuming steady-state or time-dependent conditions. The time history of steady-state results correlates with that of the X-ray flux, while that of the time-dependent cases does not, and it is qualitatively and quantitatively different from the steady-state case. Steady-state results significantly overestimated temperature measurements, while time-dependent results produced better approximations, which suggests the importance of transient effects in the experiment and also the need for time-resolved measurements.

Laboratory astrophysics↗
NASA NTRS1993

Dynamics of the baryonic component in hierarchical clustering universes

I present self-consistent 3-D simulations of the formation of virialized systems containing both gas and dark matter in a flat universe. A fully Lagrangian code based on the Smoothed Particle Hydrodynamics technique and a tree data structure has been used to evolve regions of comoving radius 2-3 Mpc. Tidal effects are included by coarse-sampling the density of the outer regions up to a radius approx. 20 Mpc. Initial conditions are set at high redshift (z greater than 7) using a standard Cold Dark Matter perturbation spectrum and a baryon mass fraction of 10 percent (omega(sub b) = 0.1). Simulations in which the gas evolves either adiabatically or radiates energy at a rate determined locally by its cooling function were performed. This allows us to investigate with the same set of simulations the importance of radiative losses in the formation of galaxies and the equilibrium structure of virialized systems where cooling is very inefficient. In the absence of radiative losses, the simulations can be rescaled to the density and radius typical of galaxy clusters. A summary of the main results is presented.

Navarro, Julio↗
NASA NTRS1999

High-Energy Space Propulsion Based on Magnetized Target Fusion

Magnetized target fusion is an approach in which a magnetized target plasma is compressed inertially by an imploding material wall. A high energy plasma liner may be used to produce the required implosion. The plasma liner is formed by the merging of a number of high momentum plasma jets converging towards the center of a sphere where two compact toroids have been introduced. Preliminary 3-D hydrodynamics modeling results using the SPHINX code of Los Alamos National Laboratory have been very encouraging and confirm earlier theoretical expectations. The concept appears ready for experimental exploration and plans for doing so are being pursued. In this talk, we explore conceptually how this innovative fusion approach could be packaged for space propulsion for interplanetary travel. We discuss the generally generic components of a baseline propulsion concept including the fusion engine, high velocity plasma accelerators, generators of compact toroids using conical theta pinches, magnetic nozzle, neutron absorption blanket, tritium reprocessing system, shock absorber, magnetohydrodynamic generator, capacitor pulsed power system, thermal management system, and micrometeorite shields.

Thio, Y. C. F.↗
NASA NTRS2000

Modeling the Compression of Merged Compact Toroids by Multiple Plasma Jets

A fusion propulsion scheme has been proposed that makes use of the merging of a spherical distribution of plasma jets to dynamically form a gaseous liner. The gaseous liner is used to implode a magnetized target to produce the fusion reaction in a standoff manner. In this paper, the merging of the plasma jets to form the gaseous liner is investigated numerically. The Los Alamos SPHINX code, based on the smoothed particle hydrodynamics method is used to model the interaction of the jets. 2-D and 3-D simulations have been performed to study the characteristics of the resulting flow when these jets collide. The results show that the jets merge to form a plasma liner that converge radially which may be used to compress the central plasma to fusion conditions. Details of the computational model and the SPH numerical methods will be presented together with the numerical results.

Thio, Y. C. Francis↗
NASA NTRS2017

The Atmospheric Response to High Nonthermal Electron Beam Fluxes in Solar Flares. I. Modeling the Brightest NUV Footpoints in the X1 Solar Flare of 2014 March 29

The 2014 March 29 X1 solar flare (SOL20140329T17:48) produced bright continuum emission in the far- and near-ultraviolet (NUV) and highly asymmetric chromospheric emission lines, providing long-sought constraints on the heating mechanisms of the lower atmosphere in solar flares. We analyze the continuum and emission line data from the Interface Region Imaging Spectrograph (IRIS) of the brightest flaring magnetic footpoints in this flare. We compare the NUV spectra of the brightest pixels to new radiative-hydrodynamic predictions calculated with the RADYN code using constraints on a nonthermal electron beam inferred from the collisional thick-target modeling of hard X-ray data from Reuven Ramaty High Energy Solar Spectroscopic Imager. We show that the atmospheric response to a high beam flux density satisfactorily achieves the observed continuum brightness in the NUV. The NUV continuum emission in this flare is consistent with hydrogen (Balmer) recombination radiation that originates from low optical depth in a dense chromospheric condensation and from the stationary beam-heated layers just below the condensation. A model producing two flaring regions (a condensation and stationary layers) in the lower atmosphere is also consistent with the asymmetric Fe II chromospheric emission line profiles observed in the impulsive phase.

Kowalski, Adam F.↗
NASA NTRS2019

Modeling Mg II During Solar Flares. I. Partial Frequency Redistribution, Opacity, and Coronal Irradiation

The Interface Region Imaging Spectrograph has routinely observed the flaring Mg II near-ultraviolet (NUV) spectrum, offering excellent diagnostic potential and a window into the location of energy deposition. A number of studies have forward-modeled both the general properties of these lines and specific flare observations. Generally these have forward-modeled radiation via post-processing of snapshots from hydrodynamic flare simulations through radiation transfer codes. There has, however, not been a study of how the physics included in these radiation transport codes affects the solution. A baseline setup for forward-modeling Mg II in flares is presented and contrasted with approaches that add or remove complexity. It is shown for Mg II that (1) partial frequency distribution (PRD) is still required during flare simulations despite the increased densities; (2) using full angle-dependent PRD affects the solution but takes significantly longer to process a snapshot; (3) including Mg I in non-LTE (NLTE) results in negligible differences to the Mg II lines but does affect the NUV quasi-continuum; (4) only hydrogen and Mg II need to be included in NLTE; (5) ideally the nonequilibrium hydrogen populations, with nonthermal collisional rates, should be used rather than the statistical equilibrium populations; (6) an atom consisting of only the ground state, h and k upper levels, and continuum level is insufficient to model the resonance lines; and (7) irradiation from a hot, dense flaring transition region can affect the formation of Mg II. We discuss modifications to the RH code allowing straightforward inclusion of the transition region and coronal irradiation in flares.

Kerr, Graham S.↗
NASA NTRS2023

Formation of the Lyman Continuum during Solar Flares

The Lyman continuum (LyC; <911.12 Å) forms at the top of the chromosphere in the quiet Sun, making LyC a powerful tool for probing the chromospheric plasma during solar flares. To understand the effects of nonthermal energy deposition in the chromosphere during flares, we analyzed LyC profiles from a grid of field-aligned radiative-hydrodynamic models generated using the RADYN code as part of the F-CHROMA project. The spectral response of LyC, the temporal evolution of the departure coefficient of hydrogen, b 1 , and the color temperature, T c , in response to a range of nonthermal electron distribution functions, were investigated. The LyC intensity was seen to increase by 4–5.5 orders of magnitude during solar flares, responding most strongly to the nonthermal electron flux of the beam. Generally, b 1 decreased from 10 2 –10 3 to closer to unity during solar flares, indicating a stronger coupling to local conditions, while T c increased from 8–9 to 10–16 kK. T c was found to be approximately equal to the electron temperature of the plasma when b1 was at a minimum. Both optically thick and optically thin components of LyC were found to be in agreement with the interpretation of recent observations. The optically thick layer forms deeper in the chromosphere during a flare compared to quiescent periods, whereas the optically thin layers form at higher altitudes due to chromospheric evaporation, in low-temperature, high-density regions propagating upward. We put these results in the context of current and future missions.

Solar flares↗
NASA NTRS2023

Solar Flare Ribbon Fronts. I. Constraining Flare Energy Deposition with IRIS Spectroscopy

Spectral lines formed at lower atmospheric layers show peculiar profiles at the "leading edge" of ribbons during solar flares. In particular, increased absorption of the BBSO/GST He I λ10830 line, as well as broad and centrally reversed profiles in the spectra of the Mg II and C II lines observed by the IRIS satellite, has been reported. In this work, we aim to understand the physical origin of such peculiar IRIS profiles, which seem to be common of many, if not all, flares. To achieve this, we quantify the spectral properties of the IRIS Mg II profiles at the ribbon leading edge during four large flares and perform a detailed comparison with a grid of radiative hydrodynamic models using the RADYN+FP code. We also studied their transition region (TR) counterparts, finding that these ribbon front locations are regions where TR emission and chromospheric evaporation are considerably weaker compared to other parts of the ribbons. Based on our comparison between the IRIS observations and modeling, our interpretation is that there are different heating regimes at play in the leading edge and the main bright part of the ribbons. More specifically, we suggest that bombardment of the chromosphere by more gradual and modest nonthermal electron energy fluxes can qualitatively explain the IRIS observations at the ribbon leading front, while stronger and more impulsive energy fluxes are required to drive chromospheric evaporation and more intense TR emission in the bright ribbon. Our results provide a possible physical origin for the peculiar behavior of the IRIS chromospheric lines in the ribbon leading edge and new constraints for the flare models.

Solar flares↗
NASA NTRS2003

A Study of Fan Stage/Casing Interaction Models

The purpose of the present study is to investigate the performance of several existing and new, blade-case interactions modeling capabilities that are compatible with the large system simulations used to capture structural response during blade-out events. Three contact models are examined for simulating the interactions between a rotor bladed disk and a case: a radial and linear gap element and a new element based on a hydrodynamic formulation. The first two models are currently available in commercial finite element codes such as NASTRAN and have been showed to perform adequately for simulating rotor-case interactions. The hydrodynamic model, although not readily available in commercial codes, may prove to be better able to characterize rotor-case interactions.

Lawrence, Charles↗
DOE OSTI2025

Modeling the Interaction of Laser-Produced Proton Beams with Matter

A major goal of this project is to significantly increase our understanding of isochoric heating of matter using laser produced proton beams, and the associated high energy density (HED) and warm dense matter (WDM) regimes generated. This will benefit research fields such as planetary science, fusion energy, plasma physics, and material science. For example, it will enhance our understanding of WDM properties of iron and silica under conditions encountered in planetary interiors and diagnostic components in fusion devices exposed to high fluxes of energetic plasma ions. The project is motivated by recent experiments that irradiated Si targets with proton beams generated by the 20 TW-laser at the SLAC MEC end-station. The HED/WDM states are probed using the 50 fs hard X-rays available in the 3rd harmonic of the LCLS. As part of this project, results from the phase contrast X-ray imaging, which shows the generation of compression waves that produces rear surface spallation, are compared with results from the 3D multi-physics multi- material code, PISALE, that combines Arbitrary Lagrangian-Eulerian (ALE) hydrodynamics with Adaptive Mesh Refinement (AMR). This comparison required modifications to several physics models in the PISALE (Pacific Island Structured-AMR with ALE) code. An important aspect of this project is the continued training of graduate students in HED physics and in conducting complex multiphysics simulations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Achieving Higher Order Accuracy in Space in Hydrodynamic Simulations of Self-Gravitating Gas

Modern astrophysical simulation codes employ a variety of numerical algorithms capable of achieving higher-order accuracy in both space and time. Albeit they succeed in achieving an effective higher spatial resolution and in suppressing the numerical damping of waves, to our knowledge, all current astrophysical simulations invoking self-gravity are limited to second-order accuracy in space. If we can devise an algorithm to evaluate self-gravity with a higher-order spatial accuracy, we can better the evaluation of the gravitational acceleration and gravitational energy release which dictate the evolution of many astrophysical systems. Herein, we present a numerical algorithm for self-gravitating hydrodynamics capable of achieving fourth order accuracy for a given density distribution on a Cartesian uniform grid. First, we derive the cell-averaged gravitational potential at fourth-order accuracy from the cell-averaged density by solving the Poisson equation. Next, we obtain the cell average of the product of the density and gravitational acceleration, which differs from the cell-averaged density multiplied by the cell-averaged gravitational acceleration. We then show the verification of the algorithm by applying it to critical test problems: (1) maintaining equilibria of self-gravitating slabs, even upon advection, (2) evolving a polytropic sphere with a massive power-law envelope, and (3) conservation of specific entropy during the propagation of a sound wave.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS2020

Synthetic Observations of Helioseismic and Magnetic Imager

Synthetic observations of the FeI line (6173A), which corresponds to the operational wavelength of Helioseismic and Magnetic Imager (HMI) on board of the NASA Solar Dynamics Observatory (SDO). Synthetic observations represent 4D maps for four angular distances from the solar disk center (0deg), 30deg, 45deg, and 60deg at 30degrees latitude in range +/- 0.75 Angstrom from the reference line of 6173.341 Angstrom, number of points across the spectral line is 256, spatial resolution of 100km, and temporal resolution of seconds. Synthetic data set obtained using SPINOR code (Frutiger et al. 2000). Synthetic observations computed from hydrodynamic simulations, which cover 25Mm of upper layers of the convection zone and 1Mm of atmosphere, the horizontal size of the domain of 80x80 Mm. Simulation results obtained the “StellarBox” code (Wray et al., 2015, 2018) with imposed rotation rate at 30deg latitude using F-plane approximation.

Irina Kitiashvili↗
DOE OSTI2025

Dust-void evolution driven by turbulent dust flux can induce runaway migration of Earth-mass planets

Torques from asymmetric dust structures (so-called dust-void and filamentary structures) formed around low-mass planets embedded in a nonturbulent dust-gas disk can exceed the torques produced by the gas disk component and then go on to dominate the planet’s orbital dynamics. Here, we investigate how these structures (hence the dust torque) change when the effect of turbulent dust diffusion and dust feedback are included, along with the direct implications on the migration of Earth-like planets. Using the FARGO3D code, we performed 2D and 3D multifluid hydrodynamic simulations, focusing on a non-migrating planet with a mass of M p = 1.5 M ⊕ in 2D and on migrating planets with M p ∈ [1.5, 12] M ⊕ in 3D. We varied the δ-dimensionless diffusivity parameter in the range [0, 3 × 10 −3 ] and considered three different Stokes numbers, St = {0.04, 0.26, 0.55}, which are representative of the gas-dominated, the transitional, and the gravity-dominated regimes, respectively. In our 2D models, we find that turbulent diffusion of dust prevents the formation of the dust-void and filamentary structures when δ > 3 × 10 −4 . Otherwise, dust structures survive turbulent diffusion flow. However, dust and total torques become positive only in transitional and gravity-dominated regimes. In our 3D models, we find that the dust-void is drastically modified and the high-density ring-shaped barrier delineating the dust-void disappears if δ ≳ 10 −4 , due to the effect of dust turbulent diffusion along with the back-reaction of the dust. For all values of δ, the filament in front of the planet is replaced by a low-density trench. Remarkably, as we have allowed the planets to migrate, the evolving dust-void can drive either runaway migration or outward (inward) oscillatory-torque migration. Our study thus suggests that low-mass Earth-like planets can undergo runaway migration in dusty disks.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1976

Impact of composite plates: Analysis of stresses and forces

The foreign object damage resistance of composite fan blades was studied. Edge impact stresses in an anisotropic plate were first calculated incorporating a constrained layer damping model. It is shown that a very thin damping layer can dramatically decrease the maximum normal impact stresses. A multilayer model of a composite plate is then presented which allows computation of the interlaminar normal and shear stresses. Results are presented for the stresses due to a line impact load normal to the plane of a composite plate. It is shown that significant interlaminar tensile stresses can develop during impact. A computer code was developed for this problem using the fast Fourier transform. A marker and cell computer code were also used to investigate the hydrodynamic impact of a fluid slug against a wall or turbine blade. Application of fluid modeling of bird impact is reviewed.

Moon, F. C.↗
DOE OSTI2026

OC6 Phase Ia - Nonlinear hydrodynamic loading validation dataset

Two validation campaigns were examined within the Offshore Code Comparison Collaboration, Continued, with Correlation and unCertainty (OC6) Phase 1 project to examine the modeling tools' underprediction of loads and motion of a floating wind semisubmersible (semi) at their surge and pitch natural frequencies. These campaigns were performed at the Maritime Research Institute Netherlands (MARIN) in 2017 and 2018. The load cases (LC) considered include: LC1 – Load measurements across semi under current loading; LC2 - Load measurements across semi under forced surge oscillation; LC3 – Load measurements across semi under wave loading, while held fixed; LC4 – Free-decay motion measurements in surge, pitch, and heave; and LC5 – Motion measurements under wave loading. Details on the results from the OC6 Phase Ia project can be found in the reference, “OC6 Phase 1: Investigating the underprediction of low-frequency hydrodynamic loads and responses of floating wind turbines”, J Phys: Conf Series 1618 032033.

17 WIND ENERGY↗
NASA NTRS1983

Analytical calculation of a single jet in cross-flow and comparison with experiment

A series of progressively finer grid systems to calculate the single jet in cross-flow experimentally measured were employed. The experimental measurements provide a collection of velocities, turbulence intensities, and jet concentration profiles with measurements of the inlet field. The use of a series of progressively finer grid systems allows a differentiation between numerical errors and the hydrodynamic modeling assumptions embodied in the 3D combustor code.

Claus, R. W.↗
NASA NTRS2012

X-Ray Spectra from MHD Simulations of Accreting Black Holes

We present the results of a new global radiation transport code coupled to a general relativistic magneto-hydrodynamic simulation of an accreting, nonrotating black hole. For the first time, we are able to explain from first principles in a self-consistent way the X-ray spectra observed from stellar-mass black holes, including a thermal peak, Compton reflection hump, power-law tail, and broad iron line. Varying only the mass accretion rate, we are able to reproduce the low/hard, steep power-law, and thermal-dominant states seen in most galactic black hole sources. The temperature in the corona is T(sub e) ~ 10 keV in a boundary layer near the disk and rises smoothly to T(sub e) greater than or approximately 100 keV in low-density regions far above the disk. Even as the disk's reflection edge varies from the horizon out to approximately equal to 6M as the accretion rate decreases, we find that the shape of the Fe Ka line is remarkably constant. This is because photons emitted from the plunging region are strongly beamed into the horizon and never reach the observer. We have also carried out a basic timing analysis of the spectra and find that the fractional variability increases with photon energy and viewer inclination angle, consistent with the coronal hot spot model for X-ray fluctuations.

Schnittman, Jeremy D.↗