Search NASA⌕ Search

SEARCH · Search NASA

Results for “IMPACT Experiment”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

Hypervelocity impact investigations and meteoroid shielding experience related to Apollo and Skylab

Generic hypervelocity impact related topics and specific Apollo/Skylab related investigations are reviewed. Cratering and spallation mechanisms and the relationships between the effecting physical parameters are discussed. Design and material requirements for meteoroid shielding structures are also addressed. Penetration resistance and failure mode studies for Apollo/Skylab components are reviewed.

Cour-Palais, B. G.↗

Direct Impact Split-Hopkinson Bar Experiment for Compression Testing at Strain Rate of 50,000 S-1

A direct impact Hopkinson compression bar experiment is used for compression testing at strain rates in the order of 50,000 s-1. A short specimen mounted on the cross-section surface of a transmitter bar is impacted directly by a projectile (the incident bar in the classical split Hopkinson bar is eliminated).The quantities measured in the test are the projectile impact velocity, the force in the transmitter bar and the strain on the surface of the specimen, which is measured using the digital image correlation method with high-speed cameras. The deformation measurements show a nonuniform deformation in the specimen. To study the strain rate sensitivity properties of the specimen’s material, the experiment is simulated using an assumed material model properties which is validated by comparing the calculated and measured quantities. For aluminum 2024-T351 the results show a small strain rate sensitivity (increase of stress with strain rate) at strain rates above 10,000 s-1.

Nathan Spulak↗

Study of a tracking and data acquisition system for the 1990's. Volume 1: User community characteristics

Projected 1990's experiments; navigation requirements and potentials; communications requirements associated with space experiments; alternative forecast options; and operational impacts on experiments are covered. A baseline of plans for the TDAS User Community, including a set of generic experiments developed to supplement existing planning for the 1990's time frame is generated. It includes extensive summaries of collected data, and a bibliography. The data are representative of inputs obtained from NASA planning sources through September 1981.

Mccreary, T.↗

Meteoroid/space debris impacts on MSFC LDEF experiments

A number of unusual effects are presented that were observed on the TCSE test samples, front cover, and structural components. These include induced UV fluorescence in some materials, the migration and degradation of KRS-5 materials, atomic oxygen (AO), and contaminant texturing and discoloration, and meteoroid and debris impacts. These effects and their causes are discussed.

Zwiener, James M.↗

IMPACT-01 Assembly Overview [Slides]

The Irradiated Material Properties Accelerated Characterization Test (IMPACT) series of experiments will irradiate three metallic fuel alloy specimens with embedded thermal conductivity probes in the Advanced Test Reactor (ATR). Metallic fuel alloys have long been under investigation for use in advanced reactors on account of their high thermal conductivity. Metallic fuel undergoes dramatic microstructural changes early in life due to fission gas swelling until ~2-3 at% burnup when pores interconnect, thus allowing fission gas to escape into the fuel pin plenum and swelling effectively ceases. The evolution of metallic fuel thermal conductivity during this early phase has never been successfully measured in situ. This experiment will be designed to use advances in measurement sciences to characterize how thermal transport properties evolve while in reactor. The IMPACT experiment consists of three metallic fuel rodlets with thermal conductivity probes axially centered within the fuel specimen. This presentation is an overview of the IMPACT-01 assembly process with a focus MFC fuel fabrication and experiment assembly steps.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Observing System Experiments for Evaluating the Impact of Satellite Sea Surface Salinity on Seasonal Predictions from the GMAO S2S System

We assess the impact of satellite sea surface salinity (SSS) observations on dynamical ENSO (El Nino-Southern Oscillation) forecasts. Assimilation of SSS improves the mixed layer depth (MLD) and modulates the Kelvin waves associated with ENSO. In column 2, the initialization differences between experiments that assimilate SSS minus those withholding SSS assimilation are presented. Column 3 shows examples of forecasts generated for the different phases of ENSO assimilating the different satellite SSS. In general, for all phases of ENSO, SSS assimilation improves forecasts. The far right column compares ensemble means for assimilation of individual and combined SMOS, Aquarius, SMAP (Soil Moisture and Ocean Salinity, NASA Aquarius, Soil Moisture Active Passive) SSS forecasts. Finally, the latest forecasts are presented comparing assimilation versus no- assimilation of satellite SSS for single forecasts over the last year.

Hackert, E.↗

Observing System Simulation Experiments to Determine the Impact of Spaceborne Differential Absorption Radar Measurements of Marine Surface Pressure on Numerical Weather Prediction

Surface air pressures over marine regions can potentially be measured by estimating the total atmospheric column oxygen content with differential absorption radar (DAR). A demonstration instrument, the Microwave Barometric Radar and Sounder (MBARS) has been funded by NASA for airborne missions in 2024 to show proof of concept. In this presentation, the potential use of such marine surface pressure observations from a spaceborne DAR platform to improve numerical weather prediction is examined using the NASA/GMAO global Observing System Simulation Experiment. Several aspects of the instrument are explored, including contamination by heavy precipitation and the expected error characteristics of the observations. Different orbit and scan configurations are compared, including various constellations of nadir smallsats and A-Train-type scanning configurations. The impacts of marine surface pressure observations are put into context with the current global observing network with a Forecast Sensitivity Observation Impact tool.

Nikki Privé↗

Benefit and impact of the Arizona land-use experiment: Executive summary

The benefits and impact of the Arizona Land-Use Experiment on the people of Arizona are examined along with the process of the technology transfer to the political and private sector of the Arizona community. Since the remotely-sensed data in use in Arizona consisted of a blend of spacecraft and aircraft information, it was hoped that the role of the aircraft in the transfer process would be identified and its benefit be determined in a real-world situation. In addition, the role of the institutional arrangements set up in Arizona to facilitate the transfer of remotely-sensed information to the user community was examined.

Goodwin, G.↗

NASA experiments onboard the controlled impact demonstration

The structural crashworthiness tests conducted by NASA on the December 1, 1984 controlled impact demonstration are discussed. The components and locations of the data acquisition and photographic systems developed by NASA to evaluate impact loads throughout the aircraft structure and the transmission of loads into the dummies are described. The effectiveness of the NASA designed absorbing seats and the vertical, longitudinal, and transverse impact loads are measured. Data that is extremely applicable to crash dynamics structural research was obtained by the data acquisition system and very low load levels were measured for the NASA energy absorbing seats.

Hayduk, R. J.↗

A vertically integrated snow/ice model over land/sea for climate models. I - Development. II - Impact on orbital change experiments

A vertically integrated formulation (VIF) model for sea ice/snow and land snow is discussed which can simulate the nonlinear effects of heat storage and transfer through the layers of snow and ice. The VIF demonstates the accuracy of the multilayer formulation, while benefitting from the computational flexibility of linear formulations. In the second part, the model is implemented in a seasonal dynamic zonally averaged climate model. It is found that, in response to a change between extreme high and low summer insolation orbits, the winter orbital change dominates over the opposite summer change for sea ice. For snow over land the shorter but more pronounced summer orbital change is shown to dominate.

Neeman, Binyamin U.↗

Impact of LDEF photovoltaic experiment findings upon spacecraft solar array design and development requirements

Photovoltaic cells (solar cells) and other solar array materials were flown in a variety of locations on the Long Duration Exposure Facility (LDEF). With respect to the predicted leading edge, solar array experiments were located at 0 degrees (row 9), 30 degrees (row 8) and 180 degrees (row 3). Postflight estimates of location of the experiments with respect to the velocity vector add 8.1 degrees to these values. Experiments were also located on the Earth end of the LDEF longitudinal axis. Types and magnitudes of detrimental effects differ between the locations with some commonality. Postflight evaluation of the solar array experiments reveal that some components/materials are very resistant to the environment to which they were exposed while others need protection, modification, or replacement. Interaction of materials with atomic oxygen (AO), as an area of major importance, was dramatically demonstrated by LDEF results. Information gained from the LDEF flight allows array developers to set new requirements for on-going and future technology and flight component development.

Young, Leighton E.↗

Improving Metallic Thermal Protection System Hypervelocity Impact Resistance Through Design of Experiments Approach

A design of experiments approach has been implemented using computational hypervelocity impact simulations to determine the most effective place to add mass to an existing metallic Thermal Protection System (TPS) to improve hypervelocity impact protection. Simulations were performed using axisymmetric models in CTH, a shock-physics code developed by Sandia National Laboratories, and validated by comparison with existing test data. The axisymmetric models were then used in a statistical sensitivity analysis to determine the influence of five design parameters on degree of hypervelocity particle dispersion. Several damage metrics were identified and evaluated. Damage metrics related to the extent of substructure damage were seen to produce misleading results, however damage metrics related to the degree of dispersion of the hypervelocity particle produced results that corresponded to physical intuition. Based on analysis of variance results it was concluded that the most effective way to increase hypervelocity impact resistance is to increase the thickness of the outer foil layer. Increasing the spacing between the outer surface and the substructure is also very effective at increasing dispersion.

Poteet, Carl C.↗

Space Health Impacts for the NASA Experience (SHINE): 2023 Space Radiation Didactic Curriculum

SHINE Training Program - Provide important information about the relevant scientific elements of the Human Research Program (HRP) Space Radiation is hopefully just the first to provide a curriculum - Targets graduate students to potential new investigators with an emphasis on early career investigators - Virtual program meant to improve inclusion

S. Robin Elgart↗

Overview of the Inaugural Space Health Impacts for the NASA Experience (SHINE) Training Program – Virtual Space Radiation Curriculum

The Space Radiation Element part of NASA Human Research Program initiated a virtual, annual space radiation curriculum. The SHINE space radiation curriculum aims to educate participants not only in the scientific aspects of space radiation but also in the agency’s risk management strategies. SHINE combines weekly seminars by speakers from NASA, other government agencies, academia, and industry, with networking sessions designed to foster collaboration between participants and interactions with NASA scientists. A total of 59 applications were received from which 25 participants were selected. The 25 participants, with citizenship from a total of 8 countries, are composed of 5 graduate students, 4 postdocs, 11 scientists and 5 professors/medical doctors. Participants have a wide range of expertise including molecular and cellular biology, microbiology, botany, physiology, engineering, physics, aerospace medicine, planetary science, biostatistics, and modeling. The inaugural course ran weekly from February 2023 to August 2023 and was comprised of lectures, less formal coffee hours and office hours. The topics covered ranged from space environments to health effects to granting opportunities. The second annual SHINE training program is scheduled from February to August 2024. In addition, a separate competitive practicum session, to allow participants to gain hands-on radiation experience, will be held Fall 2024 at the NASA Space Radiation Laboratory (NSRL).

Janice A. Zawask↗

Overview of The Inaugural Space Health Impacts for the NASA Experience (SHINE) Training Program - Virtual Space Radiation Curriculum

The Space Radiation Element part of NASA Human Research Program initiated a virtual, annual space radiation curriculum. The SHINE space radiation curriculum aims to educate participants not only in the scientific aspects of space radiation but also in the agency’s risk management strategies. SHINE combines weekly seminars by speakers from NASA, other government agencies, academia, and industry, with networking sessions designed to foster collaboration between participants and interactions with NASA scientists. A total of 59 applications were received from which 25 participants were selected. The 25 participants, with citizenship from a total of 8 countries, are composed of 5 graduate students, 4 postdocs, 11 scientists and 5 professors/medical doctors. Participants have a wide range of expertise including molecular and cellular biology, microbiology, botany, physiology, engineering, physics, aerospace medicine, planetary science, biostatistics, and modeling. The inaugural course ran weekly from February 2023 to August 2023 and was comprised of lectures, less formal coffee hours and office hours. The topics covered ranged from space environments to health effects to granting opportunities. The second annual SHINE training program is scheduled from February to August 2024. In addition, a separate competitive practicum session, to allow participants to gain hands-on radiation experience, will be held Fall 2024 at the NASA Space Radiation Laboratory (NSRL).

SHINE↗

Observing System Simulation Experiments to Determine the Potential Impact of Space-Based Lidar Wind Profiles on Weather Prediction

Observing system simulation experiments (OSSE's) provide an effective means to evaluate the potential impact of a proposed observing system, as well as to determine tradeoffs in their design, and to evaluate data assimilation methodology. Great care must be taken to ensure realism of the OSSE's, and in the interpretation of OSSE results. All of the OSSE's that have been conducted to date have demonstrated tremendous potential for space-based wind profile data to improve atmospheric analyses, forecasts, and research. This has been true for differing data assimilation systems, analysis methodology, and model resolutions. OSSE's clearly show much greater potential for observations of the complete wind profile than for single-level wind data or observations of the boundary layer alone.

Atlas, Robert↗