Search NASA⌕ Search

SEARCH · Search NASA

Results for “Injection”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Numerical studies of collinear laser-assisted injection from a foil for plasma wakefield accelerators

We present a laser-assisted electron injection scheme for beam-driven plasma wakefield acceleration. The laser is collinear with the driver and triggers the injection of hot electrons into the plasma wake by interaction with a thin solid target. We present a baseline case using the AWAKE Run 2 parameters and then perform variations on key parameters to explore the scheme. It is found that the trapped witness electron charge may be tuned by altering laser parameters, with a strong dependence on the phase of the wake upon injection. Normalized emittance settles at the order of micrometres and varies with witness charge. The scheme is robust to misalignment, with a 1/10th plasma skin-depth offset ( 20 μ m for the AWAKE case) having a negligible effect on the final beam. The final beam quality is better than similar existing schemes, and several avenues for further optimization are indicated. The constraints on the AWAKE experiment are very specific, but the general principles of this mechanism can be applied to future beam-driven plasma wakefield accelerator experiments. Published by the American Physical Society 2024

Physics↗
DOE OSTI2024

Guided Mode Evolution and Ionization Injection in Meter-Scale Multi-GeV Laser Wakefield Accelerators

Here, we show that multi-GeV laser wakefield electron accelerators in meter-scale, low density hydrodynamic plasma waveguides operate in a new nonlinear propagation regime dominated by sustained beating of lowest order modes of the ponderomotively modified channel; this occurs whether or not the injected pulse is linearly matched to the guide. For a continuously doped gas jet, this emergent mode beating effect leads to axially modulated enhancement of ionization injection and a multi-GeV energy spectrum of multiple quasimonoenergetic peaks; the same process in a locally doped jet produces single multi-GeV peaks with <10% energy spread. A three-stage model of drive laser pulse evolution and ionization injection characterizes the beating effect and explains our experimental results.

43 PARTICLE ACCELERATORS↗
DOE OSTI2025

Injection simulations of space charge dominated proton beams in IOTA

A 2.5 MeV proton injector is being constructed for the IOTA ring at Fermilab to study the interaction of nonlinear integrable optics (NIO) with high space charge beams. Space charge in the transport line from the RFQ to the injection location has a significant current dependent effect on the phase space. Simulation studies to support efficient injection of intense bunches into IOTA are presented, included schemes to inject directly into NIO lattices.

Accelerator Physics↗
DOE OSTI2024

Measured vs. Calculated Dose Rates During Ring Injection Dump Replacement

One of the most irradiated Spallation Neutron Source (SNS) accelerator components is the ring injection dump (RID), which is located downstream of the accumulator ring injection section. The unstripped and only partially stripped H - beam, about 5% of the full SNS beam current, is discarded in the injection into the accumulator ring and is redirected to the RID. According to the accelerator operation plan, the beam stop and the window assemblies of the existing RID are removed and replaced when they have reached their end-of-life owing to radiation exposure. This procedure, which includes multiple steps, took place during a facility maintenance period in March 2023. To support work planning and meet as low as reasonably achievable (ALARA) requirements during removal and exchange of the components, dose rates were calculated for each stage of the exchange operation. During each stage, dose rates were measured before and after work. This comparison shows that measured dose rates are within a factor of 2 of the predicted (calculated) dose rates.

43 PARTICLE ACCELERATORS↗
DOE OSTI2025

Study of Particle Loss in Synchrotron Phase Space Injection for ESR Using Weak-Strong Beam-Beam Simulation with Nonlinear Lattice

In this report, we use tracking simulations to investigate synchrotron phase space injection for electron accumulation in the electron storage ring of the Electron Ion Collider. Our simulation model accounts for both beam-beam interactions and lattice nonlinearities. Specifically, we examine how particle loss is influenced by various parameters. Additionally, we conduct a theoretical analysis and derive an analytical formula for the rapid evaluation of particle loss. Our results demon strate the feasibility of synchrotron phase-space injection for the electron storage ring and provide insights to guide parameter selection for the design of the injection line.

43 PARTICLE ACCELERATORS↗
DOE OSTI2025

Fracture Network Quantification during CO2 Injection

This is the presentation prepared for the ARMA 2025 (59th US Rock Mechanics/Geomechanics Symposium) Conference held in Santa Fe, New Mexico, June 8-11, 2025. Accurate mapping and quantification of these networks are essential to ensure the integrity of CO2 storage reservoirs, understand and reduce potential leakage, and maintain long-term environmental safety. This study presents a novel machine learning-driven approach, integrated with geomechanical analysis, to quantify fracture networks and assess their spatial distribution during CO2 injection. This paper combines microseismic monitoring data with principles of hydraulic diffusivity and geomechanical analysis to characterize reservoir scale fracture network. The novelty of our approach lies in its capacity to assimilate time-dependent pressure data and microseismicity into a cohesive framework, which not only identifies microseismic triggering fronts but also tracks fracture distribution during active injection. Besides, leveraging image log data and analysis our approach also provides another angle of the insights to solidate the fracture networks understanding and geomechanical impacts. Key results from our study include the detection of over 100 distinct fracture clusters across the injection site, with fracture orientations strongly correlated with the prevailing in-situ stress field.

CO2 storage and sequestration↗
DOE OSTI2025

Enabling Next Generation Reaction Injection Molding (RIM) for Lightweight Structures

Replacing metal components in trucks, trailers, and buses with lightweight polymer composites is challenging due to high temperatures and complex manufacturing. The Reaction Injection Molding (RIM) process using Dicyclopentadiene (DCPD) resin offers a solution by producing robust parts with excellent stiffness, impact strength, and resistance properties. Simulations are essential for optimizing this process, predicting defects, and improving quality. However, most commercial software is tailored for thermoplastics, requiring thermoset users to generate their own datasets. In this project, a material data card for DCPD was developed to perform RIM simulations. Design of Experiments (DOE) was used to identify key factors affecting filling, curing, and warpage, aiming to minimize cycle time and defects. The simulations explored varying injection gate parameters (size, location, number) and process conditions (mold/resin temperature, injection/curing pressure). Results showed that gate design significantly impacts filling behavior and defects. A single central gate provided balanced flow with fewer defects, while two corner gates led to more defects. Additionally, lower injection pressure increased filling time, while higher mold temperature accelerated curing but led to more warpage. This optimization framework aims to enhance DCPD part performance and promote sustainable manufacturing by reducing waste and energy consumption. This research has been performed in collaborations with McClarin Composites. The research outcome has been submitted to the Journal of Manufacturing Processes.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Electron-Ion Collider (EIC) Hadron Storage Ring (HSR) Injection Transport Beamline (Y-Line Ext.) Lattice Design and Magnet Parameters

The preliminary design of the Electron-Ion Collider (EIC) Hadron Storage Ring (HSR) Normal Conducting Injection Beamline ( Y-Line Ext. ) lattice is discussed. The preliminary design includes the periodic cells, matching sections, state of the art Twiss parameters at the HSR injection, the magnet parameters and first order instrumentation placement. Furthermore, the beamline parameters, element coordinates, and other information are discussed. The names of the HSR Injection Beamline elements used in this technical report ( i.e. HD1, HQ1 ) are preliminary and not the official site wide names.

43 PARTICLE ACCELERATORS↗
DOE OSTI2026

Estimation of radiation fields generated by injected beam losses at the EIC's RCS

This technical note provides a general estimate of radiation fields generated by injection fault events at the electron-ion collider´s (EIC) Rapid Cycling Synchrotron (RCS), calculated with the Monte Carlo particle transport and interaction code FLUKA. Calculations were performed for two major injection loss scenarios that involve iron targets and featured different electron beam energy and current values. The results presented here constitute a first order assessment of several radiological quantities associated with these electromagnetic showers and their potential effect on environmental safety and health (ESH) systems in the vicinity of injection areas.

43 PARTICLE ACCELERATORS↗
DOE OSTI2025

Dark Energy Survey Year 6 Results: Synthetic-source Injection Across the Full Survey Using Balrog

Synthetic source injection (SSI), the insertion of sources into pixel-level on-sky images, is a powerful method for characterizing object detection and measurement in wide-field, astronomical imaging surveys. Within the Dark Energy Survey (DES), SSI plays a critical role in characterizing all necessary algorithms used in converting images to catalogs, and in deriving quantities needed for the cosmology analysis, such as object detection rates, galaxy redshift estimation, galaxy magnification, star-galaxy classification, and photometric performance. We present here a source injection catalog of 146 million injections spanning the entire 5000 deg 2 DES footprint, generated using the Balrog SSI pipeline. Through this SSI sample, we demonstrate that the DES Year 6 (Y6) image processing pipeline provides accurate estimates of the object properties, for both galaxies and stars, at the percent-level, and we highlight specific regimes where the accuracy is reduced. We then show the consistency between SSI and data catalogs, for all galaxy samples developed within the weak lensing and galaxy clustering analyses of DES Y6. The consistency between the two catalogs also extends to their correlations with survey observing properties (seeing, airmass, depth, extinction, etc.). Lastly, we highlight a number of applications of this catalog to the DES Y6 cosmology analysis, such as estimates of the redshift distribution and lens magnification. This dataset is the largest SSI catalog produced at this fidelity and will serve as a key testing ground for exploring the utility of SSI catalogs in upcoming surveys such as the Vera C. Rubin Observatory Legacy Survey of Space and Time.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

Machine Learning-Based Process Control for Injection Molding of Recycled Polypropylene

The increased interest in artificial intelligence in manufacturing has driven the adoption of machine learning to optimize processes and improve efficiency. A key challenge in injection molding is the variability of recycled materials, which affects part quality and processing stability. This study presents a novel closed-loop process control approach for injection molding, leveraging machine learning to adaptively predict processing inputs and quality outcomes. The methodology was tested on five blends of recycled polypropylene (rPP), using artificial neural networks (ANNs), linear regression, and polynomial regression to model the relationships between material properties and process parameters. The dataset was split 80/20 into training and testing sets. The ANN model was implemented using TensorFlow and Keras, with six hidden layers of 32 neurons per layer, ReLU activation, and an Adam optimizer. Empirical tuning and early stopping were used to optimize performance and prevent overfitting. Predictions were evaluated based on mean absolute error (MAE), mean squared error (MSE), and percentage error. The results showed that yield stress, ultimate elongation, and part weight were accurately predicted within a 5% error for linear and polynomial regression models and within a 10% error for the ANN. However, modulus predictions were less reliable, with errors of ~11% for ANN and linear regression and ~40% for polynomial regression, reflecting the inherent variability of this property in rPP blends. Predictions of processing inputs had errors ranging from 3% to 25%, depending on the model and response variable. No single modeling approach was consistently superior across all responses, highlighting the complexity of the relationship between material properties, process parameters, and quality metrics. Overall, the work demonstrates that closed-loop process control, powered by machine learning, can effectively predict key quality parameters in injection molding of recycled materials. The proposed approach can improve process stability and material utilization, facilitating increased adoption of sustainable materials.

Krantz, Joshua↗
DOE OSTI2026

The Role of Three-dimensional Effects on Ion Injection and Acceleration in Perpendicular Shocks

Understanding the conditions that enable particle acceleration at nonrelativistic collisionless shocks is essential to unveil the origin of cosmic rays. We employ 2D and 3D hybrid simulations (with kinetic ions and fluid electrons) to explore particle acceleration and magnetic field amplification in nonrelativistic perpendicular shocks, focusing on the role of shock drift acceleration and its dependence on the shock Mach number. We perform an analysis of the ion injection process and demonstrate why efficient acceleration is only observed in 3D. In particular, we show that ion injection critically depends on the “porosity” of the magnetic turbulence in the downstream region near the shock, a property describing how easily the postshock region allows particles to traverse it and return upstream without being trapped. This effect can only be properly captured in 3D. Additionally, we explore the impact of numerical resolution on ion energization, highlighting how resolving small-scale turbulence—on scales below the thermal ion gyroradius—is essential for accurately modeling particle injection. Overall, our results emphasize the necessity of high-resolution 3D simulations to capture the fundamental microphysics driving particle acceleration at perpendicular shocks.

Orusa, Luca [Princeton Univ., NJ (United States); ↗
NASA NTRS1972

Gas-injection-start and shutdown characteristics of a 2-kilowatt to 15-kilowatt Brayton power system

Two methods of starting the Brayton power system have been considered: (1) using the alternator as a motor to spin the Brayton rotating unit (BRU), and (2) spinning the BRU by forced gas injection. The first method requires the use of an auxiliary electrical power source. An alternating voltage is applied to the terminals of the alternator to drive it as an induction motor. Only gas-injection starts are discussed in this report. The gas-injection starting method requires high-pressure gas storage and valves to route the gas flow to provide correct BRU rotation. An analog computer simulation was used to size hardware and to determine safe start and shutdown procedures. The simulation was also used to define the range of conditions for successful startups. Experimental data were also obtained under various test conditions. These data verify the validity of the start and shutdown procedures.

Cantoni, D. A.↗
NASA NTRS1973

Effect of primary-zone water injection on pollutants from a combustor burning liquid ASTM A-1 and vaporized propane fuels

A combustor segment 0.457 meter (18 in.) long with a maximum cross section of 0.153 by 0.305 meter (6 by 12 in.) was operated at inlet-air temperatures of 590 and 700 K, inlet-air pressures of 4 and 10 atmospheres, and fuel-air ratios of 0.014 and 0.018 to determine the effect of primary-zone water injection on pollutants from burning either propane or ASTM A-1 fuel. At a simulated takeoff condition of 10 atmospheres and 700 K, multiple-orifice nozzles used to inject water at 1 percent of the airflow rate reduced nitrogen oxides 75 percent with propane and 65 percent with ASTM A-1 fuel. Although carbon monoxide and unburned hydrocarbons increased with water injection, they remained relatively low; and smoke numbers were well below the visibility limit.

Ingebo, R. D.↗
NASA NTRS1972

Multiple-orifice liquid injection into hypersonic air streams.

Review of oblique water and fluorocarbon injection test results obtained in experimental studies of the effects of multiple-orifice liquid injection into hypersonic air streams. The results include the finding that maximum lateral penetration from such injections increases linearly with the square root of the jet-to-freestream dynamic-pressure ratio and is proportional to an equivalent orifice diameter.

Weaver, W. L.↗
NASA NTRS1974

Operating manual for coaxial injection combustion model

An operating manual for the coaxial injection combustion model (CICM) is presented as the final report for an eleven month effort designed to provide improvement, to verify, and to document the comprehensive computer program for analyzing the performance of thrust chamber operation with gas/liquid coaxial jet injection. The effort culminated in delivery of an operation FORTRAN IV computer program and associated documentation pertaining to the combustion conditions in the space shuttle main engine. The computer program is structured for compatibility with the standardized Joint Army-Navy-NASA-Air Force (JANNAF) performance evaluation procedure. Use of the CICM in conjunction with the JANNAF procedure allows the analysis of engine systems using coaxial gas/liquid injection.

Sutton, R. D.↗
NASA NTRS1974

Flow in a discrete slotted nozzle with massive injection

An experimental investigation has been conducted to determine the effect of massive wall injection on the flow characteristics in a slotted nozzle. Some of the experiments were performed on a water table with a slotted-nozzle test section. This has 45 deg and 15 deg half angles of convergence and divergence, respectively, throat radius of 2.5 inches, and throat width of 3 inches. The hydraulic analogy was employed to qualitatively extend the results to a compressible gas flow through the nozzle. Experimental results from the water table include contours of constant Froude and Mach number with and without injection. Photographic results are also presented for the injection through slots of CO2 and Freon-12 into a main-stream air flow in a convergent-divergent nozzle in a wind tunnel. Schlieren photographs were used to visualize the flow, and qualititative agreement between the results from the gas tunnel and water table is good.

Perkins, H. C.↗