Search NASA⌕ Search

SEARCH · Search NASA

Results for “Integrated modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Integrated assessment modeling of a zero-emissions global transportation sector

Currently responsible for over one fifth of carbon emissions worldwide, the transportation sector will need to undergo a substantial technological transition to ensure compatibility with global climate goals. Few studies have modeled strategies to achieve zero emissions across all transportation modes, including aviation and shipping, alongside an integrated analysis of feedbacks on other sectors and environmental systems. Here, we use a global integrated assessment model to evaluate deep decarbonization scenarios for the transportation sector consistent with maintaining end-of-century warming below 1.5 °C, considering varied timelines for fossil fuel phase-out and implementation of advanced alternative technologies. We highlight the leading low carbon technologies for each transportation mode, finding that electrification contributes most to decarbonization across the sector. Biofuels and hydrogen are particularly important for aviation and shipping. Our most ambitious scenario eliminates transportation emissions by mid-century, contributing substantially to achieving climate targets but requiring rapid technological shifts with integrated impacts on fuel demands and availability and upstream energy transitions.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
NASA NTRS2006

Managing Analysis Models in the Design Process

Design of large, complex space systems depends on significant model-based support for exploration of the design space. Integrated models predict system performance in mission-relevant terms given design descriptions and multiple physics-based numerical models. Both the design activities and the modeling activities warrant explicit process definitions and active process management to protect the project from excessive risk. Software and systems engineering processes have been formalized and similar formal process activities are under development for design engineering and integrated modeling. JPL is establishing a modeling process to define development and application of such system-level models.

design↗
NASA NTRS2017

Zero-Boil-Off Tank (ZBOT) Experiment: Ground-Based Validation of Self-Pressurization and Pressure Control Two-Phase CFD Model

Integral to all phases of NASA's projected space and planetary expeditions is affordable and reliable cryogenic fluid storage for use in propellant or life support systems. Cryogen vaporization due to heat leaks into the tank from its surroundings and support structure can cause self-pressurization relieved through venting. This has led to a desire to develop innovative pressure control designs based on mixing of the bulk tank fluid together with some form of active or passive cooling to allow storage of the cryogenic fluid with zero or reduced boil-off. The Zero-Boil-Off Tank (ZBOT) Experiments are a series of small scale tank pressurization and pressure control experiments aboard the International Space Station (ISS) that use a transparent volatile simulant fluid in a transparent sealed tank to delineate various fundamental fluid flow, heat and mass transport, and phase change phenomena that control storage tank pressurization and pressure control in microgravity. The hardware for ZBOT-1 flew to ISS on the OA-7 flight in April 2017 and operations are planned to begin in September 2017, encompassing more than 90 tests. This paper presents preliminary results from ZBOT's ground-based research delineating both pressurization and pressure reduction trends in the sealed test tank. Tank self-pressurization tests are conducted under three modes: VJ heating, strip heating and simultaneous VJ and strip heating in attempt to simulate heat leaks from the environment, the support structure and both. The jet mixing pressure control studies are performed either from an elevated uniform temperature condition or from thermally stratified conditions following a self-pressurization run. Jet flow rates are varied from 2-25 cm/s spanning a range of jet Re number in laminar, transitional, and turbulent regimes and a range of Weber numbers covering no ullage penetration, partial penetration and complete ullage penetration and break-up (only in microgravity). Numerical prediction of a two-phase CFD model are compared to experimental 1g results to both validate the model and also indicate the effect of the residual non-condensable gas on evolution of pressure and temperature distributions in the tank during pressurization and pressure control.

microgravity evaporation condensatio↗
NASA NTRS1993

Diabatic dynamic initialization

A version of the dynamical adjustment procedure is generalized in order to make the procedure applicable to a diabatic model. In this new initialization procedure, backward adiabatic model integration is followed by forward diabatic model integration, with a high-frequency (low-pass) time filter in the form of the Euler backward time-differencing scheme applied throughout the integration. The new procedure was applied to the Goddard Laboratory for Atmospheres 4D data-assimilation system. It was found that, right from the beginning of the forecast integration, the forecast tendencies (and fields) were free of any noise due to imbalance in initial conditions, and the shocks related to an initial imbalance between model physics and dynamics, or the initial spinup effect, were practically removed.

Fox-Rabinovitz, Michael S.↗
NASA NTRS1992

Diabatic dynamic initialization

A generalized dynamical adjustment procedure was applied to a diabatic model to produce balanced initial conditions. Namely, backward adiabatic model integration is followed by forward diabatic model integration, with a high frequency (low pass) filter in the form of the Euler-backward time differencing scheme being applied throughout the whole integration. As a result of the application of such a diabatic dynamic initialization procedure within the Goddard Laboratory for Atmospheres (GLA) 4-D data assimilation system, the following properties of forecasts from initialized fields are achieved right from the beginning of the usual forecast integration: (1) the forecast tendencies (and fields) are free of any noise due to imbalance in initial conditions; (2) the shocks related to an initial imbalance between model physics and dynamics, and especially the substantial initial imbalance of precipitation and evaporation fields, or the initial spin-up effect, are practically removed. Diabatic dynamic initialization has been compared with implicit nonlinear normal mode initialization, and found to be superior in removing the initial spin-up effect, and also in improving the tropical structure. The diabatic dynamic initialization procedure was successfully tested for the GLA system with the use of all conventional data and the GLA satellite data retrievals. It allows a smooth data insertion without any shocks or imbalances, which is highly desirable for efficient functioning of 4-D data assimilation systems. The developed initialization procedure is computationally efficient and in principle easily applicable to different forecast models.

Fox-Rabinovitz, Michael S.↗
DOE OSTI2024

Carbon neutrality in Malaysia and Kuala Lumpur: Insights from stakeholder-driven integrated assessment modeling

Several cities in Malaysia have established plans to reduce their CO2 emissions, in addition to Malaysia submitting a Nationally Determined Contribution to reduce its carbon intensity (against GDP) by 45% in 2030 compared to 2005. Meeting these emissions reduction goals will require a joint effort between governments, industries, and corporations at different scales and across sectors. In collaboration with national and sub-national stakeholders, we developed and used a global integrated assessment model to explore emissions mitigation pathways in Malaysia and Kuala Lumpur. Guided by current climate action plans, we created a suite of scenarios to reflect uncertainties in policy ambition, level of adoption, and implementation for reaching carbon neutrality. Through iterative engagement with all parties, we refined the scenarios and focus of the analysis to best meet the stakeholders’ needs. We found that Malaysia can reduce its carbon intensity and reach carbon neutrality by 2050, and that action in Kuala Lumpur can play a significant role. Decarbonization of the power sector paired with extensive electrification, energy efficiency improvements in buildings, transportation, and industry, and the use of advanced technologies such as hydrogen and carbon capture and storage will be major drivers to mitigate emissions, with carbon dioxide removal strategies being key to eliminate residual emissions. This study highlights the participatory process in which stakeholders contributed to the development of the model and guided the analysis, as well as insights into Malaysia’s decarbonization potential and the role of multilevel governance.

cities↗
NASA NTRS2016

Quantitative Validation of the Integrated Medical Model (IMM) for ISS Missions

Lifetime Surveillance of Astronaut Health (LSAH) provided observed medical event data on 33 ISS and 111 STS person-missions for use in further improving and validating the Integrated Medical Model (IMM). Using only the crew characteristics from these observed missions, the newest development version, IMM v4.0, will simulate these missions to predict medical events and outcomes. Comparing IMM predictions to the actual observed medical event counts will provide external validation and identify areas of possible improvement. In an effort to improve the power of detecting differences in this validation study, the total over each program ISS and STS will serve as the main quantitative comparison objective, specifically the following parameters: total medical events (TME), probability of loss of crew life (LOCL), and probability of evacuation (EVAC). Scatter plots of observed versus median predicted TMEs (with error bars reflecting the simulation intervals) will graphically display comparisons while linear regression will serve as the statistical test of agreement. Two scatter plots will be analyzed 1) where each point reflects a mission and 2) where each point reflects a condition-specific total number of occurrences. The coefficient of determination (R2) resulting from a linear regression with no intercept bias (intercept fixed at zero) will serve as an overall metric of agreement between IMM and the real world system (RWS). In an effort to identify as many possible discrepancies as possible for further inspection, the -level for all statistical tests comparing IMM predictions to observed data will be set to 0.1. This less stringent criterion, along with the multiple testing being conducted, should detect all perceived differences including many false positive signals resulting from random variation. The results of these analyses will reveal areas of the model requiring adjustment to improve overall IMM output, which will thereby provide better decision support for mission critical applications.

validation↗
NASA NTRS1984

Application of MAGSAT to Lithospheric Modeling in South America. Part 2: Synthesis of Geologic and Seismic Data for Development of Integrated Crustal Models

Research activities performed on MAGSAT scalar data over South America, Central America, and the adjacent marine areas are summarized. The geologic utility of magnetic anomalies detected by satellite is demonstrated by focusing on the spherical-Earth interpretation of scalar MAGSAT data in combination with ancillary geological and geophysical data to obtain lithospheric models for these regions related to their contemporary crustal dynamics processes, geologic history, current volcanism seismicity and natural resources.

Keller, G. R.↗
NASA NTRS2016

Nuclear Thermal Rocket - Arc Jet Integrated System Model

In the post-shuttle era, space exploration is moving into a new regime. Commercial space flight is in development and is planned to take on much of the low earth orbit space flight missions. With the development of a heavy lift launch vehicle, the Space Launch, System, NASA has become focused on deep space exploration. Exploration into deep space has traditionally been done with robotic probes. More ambitious missions such as manned missions to asteroids and Mars will require significant technology development. Propulsion system performance is tied to the achievability of these missions and the requirements of other developing technologies that will be required. Nuclear thermal propulsion offers a significant improvement over chemical propulsion while still achieving high levels of thrust. Opportunities exist; however, to build upon what would be considered a standard nuclear thermal engine to attain improved performance, thus further enabling deep space missions. This paper discuss the modeling of a nuclear thermal system integrated with an arc jet to further augment performance. The performance predictions and systems impacts are discussed.

Taylor, Brian D.↗
DOE OSTI2024

Limits to forests-based mitigation in integrated assessment modelling: global potentials and impacts under constraining factors

Forests-based measures such as afforestation/reforestation (A/R) and reducing deforestation (RDF) are considered promising options to mitigate climate change, yet their mitigation potentials are limited by economic and biophysical factors that are largely uncertain. The range of mitigation potential estimates from integrated assessment models raises concerns about the capacity of land systems to provide realistic, cost-effective and permanent land-based mitigation. We use the Global Change Analysis Model to quantify the economic mitigation potential of forests-based measures by simulating a climate policy including a tax on greenhouse gas emissions from agriculture, forestry, and other land uses. In addition, we assess how constraining unused arable land (UAL) availability, forestland expansion rates, and global bioenergy demand may influence the forests-based mitigation potential by simulating scenarios with alternative combinations of constraints. Results show that the average forests-based mitigation potential in 2020–2050 increases from 738 MtCO 2 .yr -1 through a forestland increase of 86 Mha in the fully constrained scenario to 1394 MtCO 2 .yr -1 through a forestland increase of 146 Mha when all constraints are relaxed. Regional potentials in terms of A/R and RDF differ strongly between scenarios: unconstrained forest expansion rates mostly increase A/R potentials in northern regions (e.g., +120 MtCO 2 .yr -1 in North America); while unconstrained UAL conversion and low bioenergy demand mostly increase RDF potentials in tropical regions (e.g., +76 and +68 MtCO 2 .yr -1 in Southeast Asia, respectively). This study shows that forests-based mitigation is limited by many factors that constrain the rates of land use change across regions. These factors, often overlooked in modelling exercises, should be carefully addressed for understanding the role of forests in global climate mitigation and defining pledges towards the Paris Agreement.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2008

Fingernail Injuries and NASA's Integrated Medical Model

The goal of space medicine is to optimize both crew health and performance. Currently, expert opinion is primarily relied upon for decision-making regarding medical equipment and supplies flown in space. Evidence-based decisions are preferred due to mass and volume limitations and the expense of space flight. The Integrated Medical Model (IMM) is an attempt to move us in that direction!

Kerstman, Eric↗
NASA NTRS1989

Local parallel models for integration of stereo matching constraints and intrinsic image combination

Parallel relaxation computations such as those of connectionist networks offer a useful model for constraint integration and intrinsic image combination in developing a general-purpose stereo matching algorithm. This paper describes such a stereo algorithm that incorporates hierarchical, surface-structure, and edge-appearance constraints that are redefined and integrated at the level of individual candidate matches. The algorithm produces a high percentage of correct decisions on a wide variety of stereo pairs. Its few errors arise when the correlation measures defined by the constraints are either weakened or ambiguous, as in the case of periodic patterns in the images. Two additional mechanisms are discussed for overcoming the remaining errors.

Stewart, Charles V.↗
NASA NTRS2004

Performance and Reliability Optimization for Aerospace Systems subject to Uncertainty and Degradation

This report summarizes work performed by the Space Systems Laboratory (SSL) for NASA Langley Research Center in the field of performance optimization for systems subject to uncertainty. The objective of the research is to develop design methods and tools to the aerospace vehicle design process which take into account lifecycle uncertainties. It recognizes that uncertainty between the predictions of integrated models and data collected from the system in its operational environment is unavoidable. Given the presence of uncertainty, the goal of this work is to develop means of identifying critical sources of uncertainty, and to combine these with the analytical tools used with integrated modeling. In this manner, system uncertainty analysis becomes part of the design process, and can motivate redesign. The specific program objectives were: 1. To incorporate uncertainty modeling, propagation and analysis into the integrated (controls, structures, payloads, disturbances, etc.) design process to derive the error bars associated with performance predictions. 2. To apply modern optimization tools to guide in the expenditure of funds in a way that most cost-effectively improves the lifecycle productivity of the system by enhancing the subsystem reliability and redundancy. The results from the second program objective are described. This report describes the work and results for the first objective: uncertainty modeling, propagation, and synthesis with integrated modeling.

Miller, David W.↗
NASA NTRS2021

ED1: Design and Prototype of a 3D Printed Wind Tunnel Model with Integrated Force Measurement

Wind tunnel testing using conventionally manufactured force measurement systems (balances) is able to yield precise and accurate results. These balances are delicate, complex instruments. Due to the nature of this high-precision complexity, balances are expensive and time-consuming to produce. These factors can limit the design potential of the model because using conventionally manufactured balances generally means that the model is designed to accommodate balances that already exist. Ideally, engineers would be able to design a measurement system that is tailored to fit the needs of the model, rather than the other way around. The goal of this research project was to determine if it is possible to overcome these drawbacks by designing a wind tunnel model with a modifiable integrated force measurement system that leverages additive manufacturing. This was undertaken by utilizing the existing UT-63 wind tunnel balance (measurement system), integrating it with a model based on the existing AGARD-B model, and performing stress analysis to optimize the design. Due to time constraints, the result of this endeavor is currently incomplete. Continued analysis and optimization are required to have a thorough understanding of the success or failure of the attempted design. As additive manufacturing technology evolves, the ability for it to become the primary method of fabrication for sensitive measurement systems increases. This project contributes to this by providing one method for design, a framework for optimizing existing balances for additive manufacturing, and resources for performing necessary stress analysis.

Callie Ellsworth↗
NASA NTRS2011

Ontological Modeling for Integrated Spacecraft Analysis

Current spacecraft work as a cooperative group of a number of subsystems. Each of these requiresmodeling software for development, testing, and prediction. It is the goal of my team to create anoverarching software architecture called the Integrated Spacecraft Analysis (ISCA) to aid in deploying the discrete subsystems' models. Such a plan has been attempted in the past, and has failed due to the excessive scope of the project. Our goal in this version of ISCA is to use new resources to reduce the scope of the project, including using ontological models to help link the internal interfaces of subsystems' models with the ISCA architecture.I have created an ontology of functions specific to the modeling system of the navigation system of a spacecraft. The resulting ontology not only links, at an architectural level, language specificinstantiations of the modeling system's code, but also is web-viewable and can act as a documentation standard. This ontology is proof of the concept that ontological modeling can aid in the integration necessary for ISCA to work, and can act as the prototype for future ISCA ontologies.

ontological modeling↗
DOE OSTI2025

Pipeline for Integrated Projects in Energy Systems (PIPES): A Tool for Integrated System Planning [Slides]

The Pipeline for Integrated Projects in Energy Systems (PIPES) is a comprehensive project, data, and workflow management tool designed for integrated modeling teams. PIPES facilitates the management of data requirements, tasks, and progress tracking, serving as a higher-level integration layer that works across various data and modeling software. This tool integrates models, data, and tools to perform large-scale, integrated analysis work at scale. PIPES is designed to streamline integrated modeling projects, enhance collaboration, and ensure the quality and efficiency of data management and workflow processes. This presentation introduces PIPES a multi-model tool for integrated system planning; it describes the underlying architecture, deep dives into common user workflows, and outlines the upcoming development roadmap beyond its current alpha state.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
NASA NTRS1988

Diagnosis by integrating model-based reasoning with knowledge-based reasoning

Our research investigates how observations can be categorized by integrating a qualitative physical model with experiential knowledge. Our domain is diagnosis of pathologic gait in humans, in which the observations are the gait motions, muscle activity during gait, and physical exam data, and the diagnostic hypotheses are the potential muscle weaknesses, muscle mistimings, and joint restrictions. Patients with underlying neurological disorders typically have several malfunctions. Among the problems that need to be faced are: the ambiguity of the observations, the ambiguity of the qualitative physical model, correspondence of the observations and hypotheses to the qualitative physical model, the inherent uncertainty of experiential knowledge, and the combinatorics involved in forming composite hypotheses. Our system divides the work so that the knowledge-based reasoning suggests which hypotheses appear more likely than others, the qualitative physical model is used to determine which hypotheses explain which observations, and another process combines these functionalities to construct a composite hypothesis based on explanatory power and plausibility. We speculate that the reasoning architecture of our system is generally applicable to complex domains in which a less-than-perfect physical model and less-than-perfect experiential knowledge need to be combined to perform diagnosis.

Bylander, Tom↗