Search NASA⌕ Search

SEARCH · Search NASA

Results for “Isobaric”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Could Microplasma Ionization and Ultrahigh Mass Resolution Alleviate Chemical Separations for Elemental and Isotopic Analysis?

At the extremes, all analytical spectrometric measurements are limited by the resolution of the spectrometer system. Spectral overlaps, isobars in the case of mass spectrometry, can lead to the implementation of complex and time-consuming chemical separations to alleviate those interferences. In the area of elemental/isotopic mass spectrometry, use of sector-field instruments can provide a mass resolution of ~10,000, but still necessitate chemical separations. Described here is the coupling of the liquid sampling-atmospheric pressure glow discharge (LS-APGD) microplasma to ultra-high resolution Orbitrap mass analyzer systems to yield mass resolution values ranging from 70k to 1M. Resolution of this order, with commensurate improvements in precision and accuracy, holds the promise to affect elemental/isotopic determinations without the need for chemical separations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Optical Microscopy-Guided Laser Ablation Electrospray Ionization Ion Mobility Mass Spectrometry: Ambient Single Cell Metabolomics with Increased Confidence in Molecular Identification

Single cell analysis is a field of increasing interest as new tools are continually being developed to understand intercellular differences within large cell populations. Laser-ablation electrospray ionization mass spectrometry (LAESI-MS) is an emerging technique for single cell metabolomics. Over the years, it has been validated that this ionization technique is advantageous for probing the molecular content of individual cells in situ. Here, we report the integration of a microscope into the optical train of the LAESI source to allow for visually informed ambient in situ single cell analysis. Additionally, we have coupled this ‘LAESI microscope’ to a drift-tube ion mobility mass spectrometer to enable separation of isobaric species and allow for the determination of ion collision cross sections in conjunction with accurate mass measurements. This combined information helps provide higher confidence for structural assignment of molecules ablated from single cells. Here, we show that this system enables the analysis of the metabolite content of Allium cepa epidermal cells with high confidence structural identification together with their spatial locations within a tissue.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Isochronic Evolution and the Radioactive Decay of r-process Nuclei

Abstract We report on the creation and application of a novel decay network that uses the latest data from experiment and evaluation. We use the network to simulate the late-time phase of the rapid neutron capture ( r ) process. In this epoch, the bulk of nuclear reactions, such as radiative capture, have ceased, and nuclear decays are the dominant transmutation channels. We find that the decay from short-lived to long-lived species naturally leads to an isochronic evolution in which nuclei with similar half-lives are populated at the same time. We consider random perturbations along each isobaric chain to initial solar-like r -process compositions to demonstrate the isochronic nature of the late-time phase of the r -process. Our analysis shows that detailed knowledge of the final isotopic composition allows for the prediction of late-time evolution with a high degree of confidence despite uncertainties that exist in astrophysical conditions and the nuclear physics properties of the most neutron-rich nuclei. We provide the time-dependent nuclear composition in the Appendix as supplemental material.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Thermodynamics of the Inner Heliosheath

We derive annual sky maps of the proton temperature in the inner heliosheath (IHS), and track their temporal evolution over the years 2009–2016 of Interstellar Boundary Explorer observations. Other associated thermodynamic parameters also determined are the density, kappa (the parameter that characterizes kappa distributions), temperature rate, polytropic index, and entropy. We exploit the theory of kappa distributions and their connection with polytropes, to (i) express a new polytropic quantity Π that remains invariant along streamlines where temperature and density may vary, (ii) parameterize the proton flux in terms of the Π invariant and kappa, and (iii) derive the temperature and density, respectively, from the slope and intercept of the linear relationship between kappa and logarithm of Π. We find the following thermodynamic characteristics: (1) temperature sky maps and histograms shifted to their lowest values in 2012 and their highest in 2015; (2) temperature negatively correlated with density, reflecting the subisothermal polytropic behavior; (3) temperature positively correlated with kappa, revealing characteristics of the mechanism responsible for generating kappa distributions; (4) processes in IHS are subisothermal tending toward isobaric, consistent with previously published results; (5) linear relationship between kappa and polytropic indices, revealing characteristics of the particle potential energy; and (6) entropy positively correlated with polytropic index, aligned with the underlying theory that entropy increases toward the isothermal state where the kappa distribution reduces to the Maxwell–Boltzmann description.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Ultra-clean and smoky marine boundary layers frequently occur in the same season over the southeast Atlantic

We study 41 d with daily median surface accumulation mode aerosol particle concentrations below 50 cm -3 (ultra-clean conditions) observed at Ascension Island (ASI; 7.9° S, 14.4° W) between June 2016 and October 2017 as part of the Layered Atlantic Smoke Interactions with Clouds (LASIC) campaign. Interestingly, these days occur during a period of great relevance for aerosol–cloud–radiation interactions, the southeast Atlantic (SEATL)biomass-burning season (approximately June–October). That means that these critical months can feature both the highest surface aerosol numbers, from smoke intrusion into the marine boundary layer, as well as the lowest. While carbon monoxide and refractory black carbon concentrations on ultra-clean days do not approach those on days with heavy smoke, they also frequently exceed background concentrations calculated in the non-burning season from December 2016 to April 2017. This is evidence that even what become ultra-clean boundary layers can make contact with and entrain from an overlying SEATL smoke layer before undergoing a process of rapid aerosol removal. Because many ultra-clean and polluted boundary layers observed at Ascension Island during the biomass burning season follow similar isobaric back trajectories, the variability in this entrainment is likely more closely tied to the variability in the overlying smoke rather than large-scale horizontal circulation through the boundary layer. Since exceptionally low accumulation mode aerosol numbers at ASI do not necessarily indicate the relative lack of other trace pollutants, this suggests the importance of regional variations in what constitutes an “ultra-clean” marine boundary layer. Finally, surface drizzle rates, frequencies and accumulation – as well as retrievals of liquid water path– all consistently tend toward higher values on ultra-clean days. This implicates enhanced coalescence scavenging in low clouds as the key driver of ultra-clean events in the southeast Atlantic marine boundary layer. These enhancements occur against and are likely mediated by the backdrop of a seasonal increase in daily mean cloud fraction and daily median liquid water path over ASI, peaking in September and October in both LASIC years. Therefore the seasonality in ultra-clean day occurrence seems directly linked to the seasonality in SEATL cloud properties. These results highlight the importance of two-way aerosol–cloud interactions in the region.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

The interpretation of temperature and salinity variables in numerical ocean model output and the calculation of heat fluxes and heat content

Abstract. The international Thermodynamic Equation of Seawater 2010 (TEOS-10) defined the enthalpy and entropy of seawater, thus enabling the global ocean heat content to be calculated as the volume integral of the product of in situ density, ρ, and potential enthalpy, h0 (with reference sea pressure of 0 dbar). In terms of Conservative Temperature, Θ, ocean heat content is the volume integral of ρcp0Θ, where cp0 is a constant “isobaric heat capacity”. However, many ocean models in the Coupled Model Intercomparison Project Phase 6 (CMIP6) as well as all models that contributed to earlier phases, such as CMIP5, CMIP3, CMIP2, and CMIP1, used EOS-80 (Equation of State – 1980) rather than the updated TEOS-10, so the question arises of how the salinity and temperature variables in these models should be physically interpreted, with a particular focus on comparison to TEOS-10-compliant observations. In this article we address how heat content, surface heat fluxes, and the meridional heat transport are best calculated using output from these models and how these quantities should be compared with those calculated from corresponding observations. We conclude that even though a model uses the EOS-80, which expects potential temperature as its input temperature, the most appropriate interpretation of the model's temperature variable is actually Conservative Temperature. This perhaps unexpected interpretation is needed to ensure that the air–sea heat flux that leaves and arrives in atmosphere and sea ice models is the same as that which arrives in and leaves the ocean model. We also show that the salinity variable carried by present TEOS-10-based models is Preformed Salinity, while the salinity variable of EOS-80-based models is also proportional to Preformed Salinity. These interpretations of the salinity and temperature variables in ocean models are an update on the comprehensive Griffies et al. (2016) paper that discusses the interpretation of many aspects of coupled Earth system models.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

TMTPro Complementary Ion Quantification Increase Plexing and Sensitivity for Accurate Multiplexed Proteomics at the MS2 level

The ability of the TMTPro isobaric labeling reagents to form complementary ions for accurate multiplexed proteomics at the MS2 level was investigated. Human and yeast peptides were labeled in distinct ratios to analyze the effect of interference on the quantification accuracy. A method, TMTProC, was developed and optimized for accurate, sensitive MS2-level quantification of up to 8 conditions in one MS-run.

Stadlmeier, Michael↗
NASA NTRS1969

Complex defects in CoO.

CoO complex defects indicated by negative enthalpy of formation, considering isobaric electrical conductivity measurements at various temperatures and oxygen pressures

Hed, A. Z.↗
NASA NTRS1971

Compositional variations in lunar spinels.

Electron probe data for spinels from Apollo 11, 12, and 14 are presented and analyzed. A modified Johnstone spinel prism showing the data distribution is given. Three projections of this prism are then presented which illustrate the variations of simple ratios that are present in the prism and permit three different perspectives of the data. The results are summarized as fO2 isobars on the spinel prism.

Haggerty, S. E.↗
NASA NTRS1972

Objective analysis of sea-level winds and pressures derived from simulated observations of a satellite radar-radiometer and actual conventional data.

A computer-based procedure is developed that combines a field of simulated satellite-derived wind speeds with a limited amount of conventional surface data so as to recover the surface pressure field and the vector wind field over the North Pacific Ocean. Wind speeds are determined from an objective analysis of high spatial density ship observations in order to simulate the anticipated output of a proposed satellite-mounted radar-radiometer system. The simulated speeds are combined with the conventional network for various spatial distributions of ship data. The average rms departure of sea-level pressure fields analyzed by deleting from 75-94% of the available ship observations from the maximum data analysis is from 3.0-4.0 mb. Comparison of the wind components implied by the isobaric patterns to those of the withheld ship observations yields average rms differences of from 8.7-9.4 kt for a range of 75-94% data deletion.

Druyan, L. M.↗
NASA NTRS1972

Transequatorial effects of sea surface temperature anomalies in a global general circulation model

The global response of the atmosphere to a persistent anomalous pool of warm sea surface temperatures in the extratropical Pacific Ocean is examined in terms of the meridional pole-to-pole profile of the zonally-averaged 600 mb surface for periods up to 90 days. Following an initial hydrostatic inflation of the isobaric surface in the latitude of the warm pool, effects spread poleward within the hemisphere, then begin to appear after about two to three weeks in high latitudes of the opposite hemisphere, but with little or no response in the tropics. The same sea temperature anomaly field generates a stronger response in winter than in summer, and a very different reaction when located in the Southern Hemisphere than when in the Northern Hemisphere.

Spar, J.↗
NASA NTRS1973

Approximations to the mean surface of Mars and Mars atmosphere using Mariner 9 occultations

When the Mariner 9 spacecraft passed behind Mars in its orbiting phase, the radio beam was cut off by some physical feature. These occultations occurred during the months of November and December 1971 and again in April and May 1972. The fairly good global spread of these data was used to estimate the shape of the Martian globe, as definable by mathematical shapes (ellipsoidal and spherical harmonic). The refraction profiles allowed the estimation of pressure near the occultation point; these, corrected back to an arbitrary fixed value of pressure, chosen to be 6.1 mb, were used as radii to an isobaric surface. Preliminary results showed a figure displacement from the mass center with a best fit southeast by 2.85 km. There was also an equatorial displacement in the direction of about 100 deg W. Atmospheric approximations for the mass center to 6.1-mb pressure distances were fit to an ellipsoid.

Cain, D. L.↗
NASA NTRS1973

Surface properties working group

The objectives of the Mars surface properties working group are described. The objectives were: (1) determine a simple reference surface that would adequately represent the shape of the planet for cartographic purposes; (2) monitor the topographic results and to assess the relative calibration and accuracies of these techniques, thereby leading to a composite topographic map of the planet; and (3) facilitate the exchange of data in closely connected disciplines. The shape, topography, and isobaric surface are discussed along with the gravity field, and crustal density model. It was found that there is no simple reference figure for the planetary surface, although an offset, triaxial ellipsoid is adequate for most purposes.

Whitehead, A. B.↗