Search NASA⌕ Search

SEARCH · Search NASA

Results for “LEAD OXIDES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

Application of Atmospheric Gases and Particulate Matter to the Assessment of Urban Heat Island

Background: Urban heat island (UHI), where built areas are warmer compared to non-urban regions, increases human related diseases and mortality. A key challenge in UHI analysis is the designation of sites as urban or suburban/rural; however, the growing complexity of green spaces in urban areas and the predominance of the transportation sector in nonurban areas creates a dilemma for distinct delineation. Objectives: This study aims to utilize the variability of atmospheric components such as particulate matter (PM), inorganic gases, and volatile organic compounds (VOCs) as direct tracers of the degree of urbanization for ground-based measurements to fully comprehend UHI in convoluted regions with indistinct delineation of urban and nonurban environments. Methods: Atmospheric gases and aerosols were used as direct tracers of urbanization for UHI analysis. Inorganic gases and particulate matter were monitored in two sites in a southeastern US city with varying degrees of urbanization. VOCs were analyzed using a proton transfer reaction time-of-flight mass spectrometer. Results: The more-urbanized site exhibited warmer night conditions and elevated total oxidant levels, leading to the formation of nanometer-sized particles. Machine learning analysis revealed similar atmospheric pollutant profiles for both sites, suggesting comparable sources and variability. Biogenic VOCs were enhanced at the less-urbanized site; however, levels of anthropogenic aromatic VOCs were comparable for both sites. A comprehensive mass spectra analysis revealed distinct molecular backbones per site that further affirmed the applicability of VOCs as indicators of urbanization. Conclusion: This study concludes that VOCs provide more direct and accurate information than typical inorganic gases and PM parameters for characterizing the degree of urbanization. Further exploration of VOCs can enhance our understanding of UHI dynamics and its interaction with vegetation in urban green spaces.

Air quality sensor↗

CaFe 2 O 4 oxygen carrier characterization during the partial oxidation of coal in the chemical looping gasification application

The calcium ferrite (CaFe 2 O 4 ) oxygen carrier characterization during chemical looping coal gasification was conducted using X-ray diffraction and Raman spectroscopic analysis. Density functional theory (DFT) analysis and experimental data were used to elucidate the mechanism for the selective oxidation of coal char. The Raman spectroscopic analyses indicated that the initial reduction of CaFe 2 O 4 were at the Fe (8) O 6 and Fe (7) O 6 octahedral sites which are related to the morphological changes at the [4 0 0] and [2 1 2] crystal planes. After the initial reduction, the Raman spectroscopic data indicated the remaining oxygen from Fe-O sites containing Ca (e.g. Fe–O–Ca) participated in the reduction reaction. Deep reduction of the CaFe 2 O 4 led to the removal of oxygen from the Fe–O–Ca bonds, indicated by the decrease in Raman intensities of the corresponding species, and the appearance of the CaO and Fe 0 . The oxygen ion diffusion controlling regime was due to the oxygen transfer occurring at the Fe octahedral sites. Furthermore, these results indicated calcium functions to control both the movement of oxygen ions through the solid and the rate of carbon oxidation in coal char leading to the selective oxidation to produce CO, the desirable product of the chemical looping gasification application.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The site of regulation of light capture in Symbiodinium: Does the peridinin–chlorophyll a–protein detach to regulate light capture?

Dinoflagellates from the genus Symbiodinium form symbiotic associations with cnidarians including corals and anemones. The photosynthetic apparatuses of these dinoflagellates possess a unique photosynthetic antenna system incorporating the peridinin–chlorophyll a–protein (PCP). It has been proposed that the appearance of a PCP-specific 77 K fluorescence emission band around 672–675 nm indicates that high light treatment results in PCP dissociation from intrinsic membrane antenna complexes, blocking excitation transfer to the intrinsic membrane-bound antenna complexes, chlorophyll a–chlorophyll c2–peridinin–protein-complex (acpPC) and associated photosystems (Reynolds et al., 2008 Proc Natl Acad Sci USA 105:13674–13678).We have tested this model using time-resolved fluorescence decay kinetics in conjunction with global fitting to compare the time-evolution of the PCP spectral bands before and after high light exposure. Here, our results show that no long-lived PCP fluorescence emission components appear either before or after high light treatment, indicating that the efficiency of excitation transfer from PCP to membrane antenna systems remains efficient and rapid even after exposure to high light. The apparent increased relative emission at around 675 nm was, instead, caused by strong preferential exciton quenching of the membrane antenna complexes associated with acpPC and reaction centers. This strong non-photochemical quenching (NPQ) is consistent with the activation of xanthophyll-associated quenching mechanisms and the generally-observed avoidance in nature of long-lived photoexcited states that can lead to oxidative damage. The acpPC component appears to be the most strongly quenched under high light exposure suggesting that it houses the photoprotective exciton quencher.

59 BASIC BIOLOGICAL SCIENCES↗

Local structural mechanism for enhanced energy storage properties in heterovalent doped NaNbO 3 ceramics

In recent years, there is a growing interest for new lead-free oxides with reversible antiferroelectric (AFE)-ferroelectric (FE) phase transition for high-power energy-storage applications. NaNbO 3 -based ceramics are particularly attractive due to their easy synthesis and cost-effectiveness. In order to stabilize reversible AFE-FE phase transition, NaNbO 3 is doped with a combination of heterovalent substitutions, although the underlying structural mechanism for the same is poorly understood. Here, we investigated local and average structures of Ca/Zr doped NaNbO 3 using neutron total scattering. Here, we show that Ca/Zr doping increases the average AFE phase (Pbma) fraction, however, the material remains as a composite of both FE (P2 1 ma) and AFE regions. Analysis of local structure suggests that increase in the long-range AFE phase results from more extensive twinning of local FE regions, due to introduced charge disorder. We propose that enhanced energy-storage properties of Ca/Zr-doped NaNbO 3 arises from localized twin boundary motion between the defect-induced pinning centers.

25 ENERGY STORAGE↗

The Sporadic History of Rubidium and its Role in Corrosion of Steel Related to Nuclear Material Storage

The influence of rubidium (Rb), both in its metallic and oxidized states, on the corrosion resistance of steels has direct relevance to the storage of radioactive Kr-85 containing nuclear materials. Kr-85 undergoes a ß-decay to generate stable, metallic Rb. The literature to date is sparse, contained primarily in company reports and divisive as to whether Rb metal, or its oxides, can lead to corrosion of steel materials. In both the direct storage of Kr-85 and used nuclear fuel that will contain Kr-85, if Rb is corrosive then continual decay of the Kr-85 will generate an increasingly corrosive environment for the steel canister it is stored in. This review was written to consolidate the known data to date on Rb corrosion of steels to identify consistencies, contradictions and remaining gaps in our understanding of the Rb : steel system.

krypton, corrosion, steel, Rubidium↗

Synthesis of anatase nanoparticles with extremely wide solid solution range and ScTiNbO{sub 6} with alpha-PbO{sub 2} structure

Anatase-type nanoparticles Sc{sub X}Ti{sub 1-2X}Nb{sub X}O{sub 2} with wide solid solution range (X=0-0.35) were hydrothermally formed at 180 deg. C for 5 h. The lattice parameters a{sub 0} and c{sub 0}, and the optical band gap of anatase gradually and linearly increased with the increase of the content of niobium and scandium from X=0 to 0.35. Their photocatalytic activity and adsorptivity by the measurement of the concentration of methylene blue (MB) that remained in the solution in the dark or under UV-light irradiation were evaluated. The anatase phase existed stably up to 900 deg. C for the samples with X=0.25-0.30 and 750 deg. C for that with X=0.35 during heat treatment in air. The phase with alpha-PbO{sub 2} structure and the rutile phases coexisted in the samples with X=0.25-0.30 after heated at temperatures above 900-950 deg. C. The alpha-PbO{sub 2} structure having composition ScTiNbO{sub 6} with possibly some cation order similar to that seen in wolframite existed as almost completely single phase after heat treatment at temperatures 900-1500 deg. C through phase transformation from anatase-type ScTiNbO{sub 6}. - Graphical abstract: Anatase-type Sc{sub X}Ti{sub 1-2X}Nb{sub X}O{sub 2} solid solutions with wide solid solution range (X=0-0.35) were hydrothermally formed as nanoparticles from the precursor solutions of Sc(NO{sub 3}){sub 3}, TiOSO{sub 4}, NbCl{sub 5} at 180 deg. C for 5 h using the hydrolysis of urea. Anatase-type ScTiNbO{sub 6} was synthesized under hydrothermal condition. ScTiNbO{sub 6} having alpha-PbO{sub 2} structure with possibly some cation order similar to that seen in wolframite was formed through phase transformation above 900 deg. C.

36 MATERIALS SCIENCE↗

Transformation of rutile to TiO{sub 2}-II in a high pressure hydrothermal environment

The high pressure transformation of rutile to TiO{sub 2}-II with the α-PbO{sub 2} structure is known to be kinetically hindered. In this study we show that a hydrothermal environment at 6 GPa and 650 °C provides appreciable rates for producing single phase bulk samples of TiO{sub 2}-II. So obtained TiO{sub 2}-II was characterized by scanning electron microscopy, powder X-ray diffraction, Raman and Far-IR spectroscopy. The structural properties are identical to TiO{sub 2}-II from dry transitions. Transmission electron microscopy studies strongly indicate that Ostwald ripening processes play an important role in the hydrothermally assisted transformation and subsequent growth of TiO{sub 2}-II crystals. TiO{sub 2}-II is thermally stable to about 550 °C. At 600 °C the onset of the transformation to rutile is observed. The thermal expansion in the temperature range from room temperature to 500 °C is highly anisotropic, virtually affecting only the c unit cell parameter (α{sub c}=7.1(2)×10{sup −6} °C{sup −1}). The pressure–temperature conditions for the hydrothermally assisted transformation of rutile are viable for industrial production settings, and in light of the large technological significance of TiO{sub 2}, TiO{sub 2}-II may present an interesting target for large-scale synthesis. - Graphical abstract: Highly crystalline TiO{sub 2}-II, which is the high pressure form of titania with the α-PbO{sub 2} structure, can be prepared from rutile at 6 GPa and 650 °C when employing a hydrothermal environment. Display Omitted.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Diffusion behavior of copper atoms under Cu(II) reduction in Cucurbit[8]uril cavity at elevated temperatures

In this paper we describe copper clusters and nanoparticles formation by the reduction of copper (II) ions inside cavities of macrocycle molecules using supramolecular compound [Cu(Cyclen)(H{sub 2}O)@CB[8]](NO{sub 3}){sub 2}·12H{sub 2}O followed by Cu atoms diffusion between macrocycle CB[8] molecules. To understand the copper cluster genesis and nanoparticles formation x-ray powder diffraction (XRD), electron paramagnetic resonance (EPR), FTIR-spectroscopies, HRTEM and thermal analysis were used. It was found that atomic Cu(0) was not fixed in the cavity under heating, and Cu clusters and nanoparticles were formed by heating of supramolecular compound powder at 200–340 °C in He, but more preferably in H{sub 2}. The process was partially reversible after heating the powder up to 300 °C for 15 min and air exposure for a few months. The process was irreversible after heating of the sample at temperatures higher than 340 °C due to CB[8] cavitand decomposition. In general, exposure of the samples to air leads to oxidation and hydration clusters of Cu. Nanoparticles up to 600 nm in size formed on the surface of agglomerated polycrystalline powder at temperatures lower than 200 °C. The clusters less than 7 nm and 40 nm in size were formed at 300 °C inside and outside agglomerating polycrystalline powder, respectively. The diffusion coefficient of copper atoms inside polycrystalline CB[8] agglomerates equal to 10{sup −10} cm{sup 2}/s by heating the samples at 300 °C was found. - Graphical abstract: Copper nanoparticles and clusters are formed by the reduction of copper (II) ions inside cavities of macrocycle molecules at 200–340 °C in He, but more preferably in H{sub 2} using supramolecular compound [Cu(Cyclen)(H{sub 2}O)@CB[8]](NO{sub 3}){sub 2}·12H{sub 2}O followed by Cu atoms diffusion between macrocycle CB[8] molecules. Nanoparticles up to 600 nm in size formed on the surface of agglomerated polycrystalline powder at temperatures lower than 200 °C. The clusters less than 7 nm and 40 nm in size were formed at 300 °C inside and outside agglomerating polycrystalline powder, respectively. - Highlights: • We considered Cu NP's formation at CuCyclen thermolysis in H{sub 2} and He. • Initial complex CuCyclen was located inside cavitand CB[8]. • Cu(0) reduced in cavities diffuse between CB[8] molecules and Cu nuclei appear. • NPs less than 7 and 50 nm were formed inside and outside the CB[8] powder. • Coefficient of Cu(O) diffusion is 10{sup −10} cm{sup 2}/s for temperature at 300 °C.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A first-principles study on new high-pressure metastable polymorphs of MoO{sub 2}

The pressure-dependence of the stabilities of several MoO{sub 2} phases has been investigated by density-functional theory (GGA/PBE/PAW). Out of a set of 15 MX{sub 2} structures, the [SnO{sub 2}(II)], [α-PbO{sub 2}], and a modified rutile structure type were identified as possible metastable MoO{sub 2} polymorphs based on the analysis of thermodynamic properties and dynamic stability. High-pressure calculations suggest an orthorhombic TiO{sub 2} structure, dubbed [ortho-TiO{sub 2}], as a high-pressure polymorph at around 25 GPa. Furthermore, we find that the previously reported rutile-type MoO{sub 2} may be understood as a modified rutile type similar to the [VO{sub 2}] structure. - Graphical abstract: First-principles electronic structure and thermochemical calculations reveal four structure candidates as possible metastable polymorphs of MoO{sub 2}. Most promising is a distorted rutile-type similar to the known [VO{sub 2}] structure. An orthorhombic polymorph is proposed as a high-pressure polymorph. Display Omitted - Highlights: • Three possible metastable structure candidates for MoO{sub 2}. • Undistorted rutile type is improbable, a new distorted rutile-type MoO{sub 2} was suggested. • Orthorhombic phase of MoO{sub 2} (ortho-TiO{sub 2} type) should form at 25 GPa. • ab initio thermochemical data provided for MoO{sub 2}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Upconversion white-light emitting of Tm{sup 3+} and Er{sup 3+} codoped oxyfluoride and its achieving mechanism

Tm{sup 3+} and Er{sup 3+} codoped oxyfluoride samples were synthesized by high temperature solid-state reaction. Intense upconversion white light of Tm{sup 3+} and Er{sup 3+} codoped oxyfluoride was observed under the excitation of a 980-nm infrared laser diode, which was composed of three primary colors, i.e., blue (from Tm{sup 3+}), green (from Er{sup 3+}), and red emissions (from Tm{sup 3+} and Er{sup 3+}). The optimal white upconversion light, which is close to the standard achromatic point, was achieved firstly by phase transition from PbO to PbO{sub 2}. The scanning electron microscopy, X-ray diffraction and Commission Internationale d'Eclairage chromaticity analysis revealed the dependence of the white upconversion light both on microstructure and Er{sup 3+} content. The sample with white upconversion light close to the standard achromatic point has potential applications in the fields of the three-dimensional solid-state display and multicolor backlight.

36 MATERIALS SCIENCE↗

Screen printing large-area organometal halide perovskite thin films for efficient photodetectors

Highlights: • A stable paste with perovskite precursor was produced out. • Screen printing was proposed to fabricate perovskite thin films. • The perovskite photodetectors with symmetric architectures show reasonable performance with high photocurrent and fast response. - Abstract: Organometal halide perovskites have demonstrated excellent features compared to conventional optoelectronic materials. To date, the perovskite films have generally been fabricated by either spin coating or vapor deposition. However, both methods cannot simultaneously meet large scale and low cost of production. Here, a simple, low-cost and high-throughput strategy was proposed to fabricate perovskite thin films, which were further applied in photodetectors. First, lead compound nanoparticles were synthesized by a solvent precipitation method, then a paste with the lead compound nanoparticles was screen printed to form PbO films involving calcination, and next the PbO films directly reacted with CH{sub 3}NH{sub 3}I solution to convert into CH{sub 3}NH{sub 3}PbI{sub 3} films. The CH{sub 3}NH{sub 3}PbI{sub 3} films consisted of micron crystals, whose sizes can be effectively controlled by adjusting CH{sub 3}NH{sub 3}I concentration. Furthermore, the CH{sub 3}NH{sub 3}PbI{sub 3} films were applied in photodetectors, which showed good performance with high sensitivity and fast response.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Flux growth and magneto-transport properties of cubic antiperovskite Ca3PbO single crystals

Highlights: • Antiperovskite Ca{sub 3}PbO is predicted to be a three-dimensional Dirac fermion system. • Cubic crystals, 1 mm in size, were obtained by a Ca-self-flux method. • The crucible and sealing method were critical factors to reduce carrier density. • Shubnikov-de Haas oscillations were clearly observed, indicating its high purity. - Abstract: We report the single crystal growth of cubic antiperovskite Ca{sub 3}PbO by a Ca-self-flux method. Cubic crystals, 1 mm in size, were successfully obtained through the use of iron crucibles sealed in stainless steel capsules. The crucible material and sealing method were found to be critical factors for achieving large crystals with low carrier density. The crystals were subsequently characterized by powder and single-crystal x-ray diffraction experiments, electron-probe microanalysis, and Hall effect measurements. Through the use of short stainless steel rods as tight caps for the crucible and fillers to occupy extra space in the capsule, the Ca evaporation loss of the flux, which contributes to Ca vacancy formation, was effectively reduced. Hence, the hole carrier density in the single crystal was reduced to 4.0 × 10{sup 19} cm{sup −3}. The crystal synthesized under optimized growth conditions showed clear Shubnikov-de Haas oscillations, indicating its high purity and homogeneity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Oxidative coupling of methane (OCM) conversion into C 2 products through a CO 2 /O 2 co-transport membrane reactor

Oxidative coupling of methane (OCM), which transforms CH 4 into C 2 products (C 2 H 6 and C 2 H 4 ) with molecular O 2 as the oxidant, is one of the most studied direct methane conversions (DMCs). However, a major technical hurdle to the OCM process is to achieve high CH 4 conversion at high C 2 (C 2 H 6 and C 2 H 4 ) selectivity. One rudimentary cause for this “tradeoff” behavior is the high chemical reactivity of the products (C 2 H 6 or C 2 H 4 ), which can be re-oxidized by O 2 . To overcome this thermodynamic challenge, minimizing the oxidizing power of the oxidant and lowering the local oxygen partial pressure are keys. Here, In this work, we demonstrate a new membrane reactor that capture CO 2 /O 2 from a flue gas and uses it for OCM conversion. The results show that the co-captured CO 2 /O 2 mixture converts CH 4 into C 2 H 6 in the presence of a 2%Mn–5%Na 2 WO 4 /SiO 2 catalyst, followed by thermal cracking of C 2 H 6 into C 2 H 4 and H 2 . The presence of CO 2 decreases the local partial pressure of O 2 , thus reducing the propensity of C 2 -products re-oxidation and leading to a higher C 2 selectivity. We show that a small button-type membrane reactor can achieve 12% C 2 yield with ~57% C 2 -selectivity using a diluted CH 4 -Ar mixture as the feedstock. We expect higher C 2 yield with tubular plug-flow membrane reactors in the future. We also highlight the unique advantage of the membrane reactor in intensifying CO 2 capture from both flue gas and OCM purification process into one single step.

42 ENGINEERING↗

Phosphonic-Acid-Reinforced Polymer Hole Transport Layers for Deployable p-i-n Perovskite Photovoltaics

The long-term durability prospects of halide perovskite solar cells are rapidly improving; however, the interface between the hole transport layer (HTL) and the perovskite remains a source of degradation. Alone, polymer- or carbazole-based HTLs suffer from incomplete coverage of the underlying indium tin oxide glass, leading to degradation and compromised performance. Here, we show a multi-HTL approach whereby a polymer HTL is reinforced using a phosphonic acid modification leading to better protection of the buried perovskite interface and more columnar growth of perovskite film, resulting in an ~40-mV open-circuit voltage (VOC) improvement indicative of suppressed interfacial recombination across multiple p-i-n device architectures. Solar cells with this reinforced HTL show higher tolerance to several accelerated stress tests. We report, among the best durabilities for unencapsulated cells, a T90 ~3,000 h (T80 ~5,900 h) at 65 degrees C under continuous 1.2 sun AM 1.5G illumination and maximum power point tracking, representing a nearly 4-fold increase compared with [2-(9H-carbazol-9-yl)ethyl]phosphonic acid (2PACz)-only devices. Furthermore, we deployed a device with this reinforced HTL on a cube satellite, with long-duration operational space testing results exceeding T80 for the complete mission duration of ~100 days in low Earth orbit.

14 SOLAR ENERGY↗

Acetaminophen hepatotoxicity and HIF-1{alpha} induction in acetaminophen toxicity in mice occurs without hypoxia

HIF-1{alpha} is a nuclear factor important in the transcription of genes controlling angiogenesis including vascular endothelial growth factor (VEGF). Both hypoxia and oxidative stress are known mechanisms for the induction of HIF-1{alpha}. Oxidative stress and mitochondrial permeability transition (MPT) are mechanistically important in acetaminophen (APAP) toxicity in the mouse. MPT may occur as a result of oxidative stress and leads to a large increase in oxidative stress. We previously reported the induction of HIF-1{alpha} in mice with APAP toxicity and have shown that VEGF is important in hepatocyte regeneration following APAP toxicity. The following study was performed to examine the relative contribution of hypoxia versus oxidative stress to the induction of HIF-1{alpha} in APAP toxicity in the mouse. Time course studies using the hypoxia marker pimonidazole showed no staining for pimonidazole at 1 or 2 h in B6C3F1 mice treated with APAP. Staining for pimonidazole was present in the midzonal to periportal regions at 4, 8, 24 and 48 h and no staining was observed in centrilobular hepatocytes, the sites of the toxicity. Subsequent studies with the MPT inhibitor cyclosporine A showed that cyclosporine A (CYC; 10 mg/kg) reduced HIF-1{alpha} induction in APAP treated mice at 1 and 4 h and did not inhibit the metabolism of APAP (depletion of hepatic non-protein sulfhydryls and hepatic protein adduct levels). The data suggest that HIF-1{alpha} induction in the early stages of APAP toxicity is secondary to oxidative stress via a mechanism involving MPT. In addition, APAP toxicity is not mediated by a hypoxia mechanism.

60 APPLIED LIFE SCIENCES↗

Acute chlorine gas exposure produces transient inflammation and a progressive alteration in surfactant composition with accompanying mechanical dysfunction

Acute Cl{sub 2} exposure following industrial accidents or military/terrorist activity causes pulmonary injury and severe acute respiratory distress. Prior studies suggest that antioxidant depletion is important in producing dysfunction, however a pathophysiologic mechanism has not been elucidated. We propose that acute Cl{sub 2} inhalation leads to oxidative modification of lung lining fluid, producing surfactant inactivation, inflammation and mechanical respiratory dysfunction at the organ level. C57BL/6J mice underwent whole-body exposure to an effective 60 ppm-hour Cl{sub 2} dose, and were euthanized 3, 24 and 48 h later. Whereas pulmonary architecture and endothelial barrier function were preserved, transient neutrophilia, peaking at 24 h, was noted. Increased expression of ARG1, CCL2, RETLNA, IL-1b, and PTGS2 genes was observed in bronchoalveolar lavage (BAL) cells with peak change in all genes at 24 h. Cl{sub 2} exposure had no effect on NOS2 mRNA or iNOS protein expression, nor on BAL NO{sub 3}{sup −} or NO{sub 2}{sup −}. Expression of the alternative macrophage activation markers, Relm-α and mannose receptor was increased in alveolar macrophages and pulmonary epithelium. Capillary surfactometry demonstrated impaired surfactant function, and altered BAL phospholipid and surfactant protein content following exposure. Organ level respiratory function was assessed by forced oscillation technique at 5 end expiratory pressures. Cl{sub 2} exposure had no significant effect on either airway or tissue resistance. Pulmonary elastance was elevated with time following exposure and demonstrated PEEP refractory derecruitment at 48 h, despite waning inflammation. These data support a role for surfactant inactivation as a physiologic mechanism underlying respiratory dysfunction following Cl{sub 2} inhalation. - Highlights: • Effect of 60 ppm*hr Cl{sub 2} gas on lung inflammation and mechanical function examined. • Pulmonary inflammation is transient and minor. • Alterations in surfactant homeostasis and pulmonary mechanics are noted. • No increase in the caliber of larger airways was suggested. • Small airways stability appears impaired based on PEEP response of mechanics.

60 APPLIED LIFE SCIENCES↗