Search NASA⌕ Search

SEARCH · Search NASA

Results for “Land Models”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

FORWARD AND INVERSE L-BAND RADIATIVE TRANSFER MODELING OVER THE DRY CHACO, USING SMOS OBSERVATIONS, LAND SURFACE MODELING AND IN SITU DATA

Passive microwave L-band remote sensing is well known for its sensitivity to surface soil moisture over land.The signal is also affected by other dynamic variables such as vegetation and soil salinity. In this research, L-band microwave observations of the Soil Moisture Ocean Salinity (SMOS) mission are used to explore soil surface salinity, moisture and vegetation, in the Argentinean Dry Chaco, an area with possible emerging dryland salinity. A Radiative Transfer Model (RTM) with inclusion of a correction to the soil’s dielectric constant for salinity was used in forward and inverse mode, using either in situ data or Catchment Land Surface Model (CLSM) simulations as RTM input. The forward analysis pointed out shortcomings in the modeled soil moisture and soil surface temperature estimates. The impact of salinity on forward simulations over the Dry Chaco was limited.The RTM inversion using 10 years of SMOS brightness temperature observations resulted in realistic estimates of vegetation and roughness, both with and withouto ptimizing a correction term for the dielectric constant in terms of salinity equivalents. However,the retrieval of the correction term to the dielectric constant was very uncertain and not representative of soil surface salinity, but rather of open water, texture uncertainty or soil moisture bias.

L-band↗

NGEE Arctic Integrated Modeling (IM2): Improved subgrid hillslope hydrologic connectivity

This data product represents the integration of new code capability for arctic tundra hillslope hydrologic processes into the Energy Exascale Earth System Model (E3SM), through the E3SM Land Model (ELM) component. This code integration is the result of collaborative effort between the NGEE Arctic project and the E3SM project. The current ELM represents water movement primarily through vertical processes, such as precipitation, canopy interception, evaporation, infiltration, and soil water movement. Lateral water movement—such as surface runoff, subsurface flow, and river transport—plays a significant role in the hydrological cycle, especially in regions with varied topography. While E3SM includes a runoff routing component representing water transport in the river network, the lateral transport of water at the subgrid scale within the land model has previously not been taken into account. With the recent development of topographic units within the ELM subgrid data structure, there is an opportunity to simulate hillslope hydrologic connectivity by introducing water transport along topographic gradients. We expect that more realistic representation of hillslope hydrologic processes will lead to improved predictions of both soil water content and river network flows. Lateral transport of water at and near the surface is represented as a sub-grid process in this new code development. Water is tracked as it moves from higher to lower elevations within a gridcell. This capability uses the nested hierarchical sub-grid scheme within ELM to connect water fluxes from sub-grid elements with higher elevation to those with lower elevation. This data record consists of a single document (pdf format) that describes the theoretical basis for the hillslope hydrology processes added to ELM, and describes the modifications made to the ELM code. The Methods section of this metadata record includes a link to the public E3SM code repository where the exact code modifications as integrated in E3SM can be accessed. The Next-Generation Ecosystem Experiments: Arctic (NGEE Arctic), was a research effort to reduce uncertainty in Earth System Models by developing a predictive understanding of carbon-rich Arctic ecosystems and feedbacks to climate. NGEE Arctic was supported by the Department of Energy's Office of Biological and Environmental Research. The NGEE Arctic project had two field research sites: 1) located within the Arctic polygonal tundra coastal region on the Barrow Environmental Observatory (BEO) and the North Slope near Utqiagvik (Barrow), Alaska and 2) multiple areas on the discontinuous permafrost region of the Seward Peninsula north of Nome, Alaska. Through observations, experiments, and synthesis with existing datasets, NGEE Arctic provided an enhanced knowledge base for multi-scale modeling and contributed to improved process representation at global pan-Arctic scales within the Department of Energy's Earth system Model (the Energy Exascale Earth System Model, or E3SM), and specifically within the E3SM Land Model component (ELM).

Thornton, Peter E [ORNL] (ORCID:0000000247595158)↗

Challenging a Global Land Surface Model in a Local Socio-Environmental System

Land surface models (LSMs) predict how terrestrial fluxes of carbon, water, and energy change with abiotic drivers to inform the other components of Earth system models. Here, we focus on a single human-dominated watershed in southwestern Michigan, USA. We compare multiple processes in a commonly used LSM, the Community Land Model (CLM), to observational data at the single grid cell scale. For model inputs, we show correlations (Pearson’s R) ranging from 0.46 to 0.81 for annual temperature and precipitation, but a substantial mismatch between land cover distributions and their changes over time, with CLM correctly representing total agricultural area, but assuming large areas of natural grasslands where forests grow in reality. For CLM processes (outputs), seasonal changes in leaf area index (LAI; phenology) do not track satellite estimates well, and peak LAI in CLM is nearly double the satellite record (5.1 versus 2.8). Estimates of greenness and productivity, however, are more similar between CLM and observations. Summer soil moisture tracks in timing but not magnitude. Land surface reflectance (albedo) shows significant positive correlations in the winter, but not in the summer. Looking forward, key areas for model improvement include land cover distribution estimates, phenology algorithms, summertime radiative transfer modelling, and plant stress responses.

54 ENVIRONMENTAL SCIENCES↗

Performance Tests of Snow-Related Variables Over the Tibetan Plateau and Himalayas Using a New Version of NASA GEOS-5 Land Surface Model that Includes the Snow Darkening Effect

The snow darkening effect, i.e. the reduction of snow albedo, is caused by absorption of solar radiation by absorbing aerosols (dust, black carbon, and organic carbon) deposited on the snow surface. This process is probably important over Himalayan and Tibetan glaciers due to the transport of highly polluted Atmospheric Brown Cloud (ABC) from the Indo-Gangetic Plain (IGP). This effect has been incorporated into the NASA Goddard Earth Observing System model, version 5 (GEOS-5) atmospheric transport model. The Catchment land surface model (LSM) used in GEOS-5 considers 3 snow layers. Code was developed to track the mass concentration of aerosols in the three layers, taking into account such processes as the flushing of the compounds as liquid water percolates through the snowpack. In GEOS-5, aerosol emissions, transports, and depositions are well simulated in the Goddard Chemistry Aerosol Radiation and Transport (GO CART) module; we recently made the connection between GOCART and the GEOS-5 system fitted with the revised LSM. Preliminary simulations were performed with this new system in "replay" mode (i.e., with atmospheric dynamics guided by reanalysis) at 2x2.5 degree horizontal resolution, covering the period 1 November 2005 - 31 December 2009; we consider the final three years of simulation here. The three simulations used the following variants of the LSM: (1) the original Catchment LSM with a fixed fresh snowfall density of 150 kg m-3 ; (2) the LSM fitted with the new snow albedo code, used here without aerosol deposition but with changes in density formulation and melting water effect on snow specific surface area, (3) the LSM fitted with the new snow albedo code as same as (2) but with fixed aerosol deposition rates (computed from GOCART values averaged over the Tibetan Plateau domain [Ion.: 60-120E; lat.: 20-50N] during March-May 2008) applied to all grid points at every time step. For (2) and (3), the same setting on the fresh snowfall density as in (1) was used.

Yasunari, Tppei J.↗

NGEE Arctic Integrated Modeling (IM3): Improved snow-vegetation interaction

This data product represents the integration of new code capability for arctic tundra snow-vegetation-terrain interactions into the Energy Exascale Earth System Model (E3SM), through the E3SM Land Model (ELM) component. This code integration is the result of collaborative effort between the NGEE Arctic project and the E3SM project. The NGEE Arctic project developed a total of six Integrated Modeling (IM) modules informed by observations and experiments. New ELM capability represented by this data product (IM3) falls into three categories: 1) Downscaling from gridcell to topographic unit level when working through the existing coupler bypass code. 2) Four new parameters (taper, stocking, bendresist, and vegshape) have been added to ELM to allow for flexible definition of snow-vegetation interactions. 3) Vegshape and bendresist parameters are used to calculate the fraction of leaf area and/or stem area buried by snow for a given snow depth. This data record consists of a single document (pdf format) that describes the theoretical basis for the snow-vegetation-terrain interactions added to ELM, and describes the modifications made to the ELM code. The Methods section of this metadata record includes a link to the public E3SM code repository where the exact code modifications as integrated in E3SM can be accessed. The Next-Generation Ecosystem Experiments: Arctic (NGEE Arctic), was a research effort to reduce uncertainty in Earth System Models by developing a predictive understanding of carbon-rich Arctic ecosystems and feedbacks to climate. NGEE Arctic was supported by the Department of Energy's Office of Biological and Environmental Research. The NGEE Arctic project had two field research sites: 1) located within the Arctic polygonal tundra coastal region on the Barrow Environmental Observatory (BEO) and the North Slope near Utqiagvik (Barrow), Alaska and 2) multiple areas on the discontinuous permafrost region of the Seward Peninsula north of Nome, Alaska. Through observations, experiments, and synthesis with existing datasets, NGEE Arctic provided an enhanced knowledge base for multi-scale modeling and contributed to improved process representation at global pan-Arctic scales within the Department of Energy's Earth system Model (the Energy Exascale Earth System Model, or E3SM), and specifically within the E3SM Land Model component (ELM).

Thornton, Peter E [ORNL] (ORCID:0000000247595158)↗

Exploring new topography-based subgrid spatial structures for improving land surface modeling

Topography plays an important role in land surface processes through its influence on atmospheric forcing, soil and vegetation properties, and river network topology and drainage area. Land surface models with a spatial structure that captures spatial heterogeneity, which is directly affected by topography, may improve the representation of land surface processes. Previous studies found that land surface modeling, using subbasins instead of structured grids as computational units, improves the scalability of simulated runoff and streamflow processes. In this study, new land surface spatial structures are explored by further dividing subbasins into subgrid structures based on topographic properties, including surface elevation, slope and aspect. Two methods (local and global) of watershed discretization are applied to derive two types of subgrid structures (geo-located and non-geo-located) over the topographically diverse Columbia River basin in the northwestern United States. In the global method, a fixed elevation classification scheme is used to discretize subbasins. The local method utilizes concepts of hypsometric analysis to discretize each subbasin, using different elevation ranges that also naturally account for slope variations. The relative merits of the two methods and subgrid structures are investigated for their ability to capture topographic heterogeneity and the implications of this on representations of atmospheric forcing and land cover spatial patterns. Results showed that the local method reduces the standard deviation (SD) of subgrid surface elevation in the study domain by 17 to 19 % compared to the global method, highlighting the relative advantages of the local method for capturing subgrid topographic variations. The comparison between the two types of subgrid structures showed that the non-geo-located subgrid structures are more consistent across different area threshold values than the geo-located subgrid structures. Altogether the local method and non-geo-located subgrid structures effectively and robustly capture topographic, climatic and vegetation variability, which is important for land surface modeling.

58 GEOSCIENCES↗

Identifying and Addressing Land Surface Model Deficiencies with Data Assimilation

Land surface models (LSMs) encapsulate our understanding of terrestrial water and energy cycle physics and provide estimates of land surface states and fluxes when and where measurement gaps exist. Gaps in our understanding of the physics are a different issue. Data assimilation can address that issue both directly, through updating of prognostic model variables, or indirectly, when the simulated world conflicts with observation, necessitating adjustment of the model. Here we will focus on the latter case and present several examples, including (1) depth to bedrock adjustment to accommodate assimilated GRACE terrestrial water storage data; (2) steps to prevent immediate melting of assimilated snow cover; (3) irrigation's contribution to evapotranspiration; (4) lessons learned from soil moisture data assimilation; (5) the potential impact of satellite based runoff observation

Rodell, Matthew↗

A method for landing gear modeling and simulation with experimental validation

This document presents an approach for modeling and simulating landing gear systems. Specifically, a nonlinear model of an A-6 Intruder Main Gear is developed, simulated, and validated against static and dynamic test data. This model includes nonlinear effects such as a polytropic gas model, velocity squared damping, a geometry governed model for the discharge coefficients, stick-slip friction effects and a nonlinear tire spring and damping model. An Adams-Moulton predictor corrector was used to integrate the equations of motion until a discontinuity caused by a stick-slip friction model was reached, at which point, a Runga-Kutta routine integrated past the discontinuity and returned the problem solution back to the predictor corrector. Run times of this software are around 2 mins. per 1 sec. of simulation under dynamic circumstances. To validate the model, engineers at the Aircraft Landing Dynamics facilities at NASA Langley Research Center installed one A-6 main gear on a drop carriage and used a hydraulic shaker table to provide simulated runway inputs to the gear. Model parameters were tuned to produce excellent agreement for many cases.

Daniels, James N.↗

Applicability of land use models for the Houston area test site

Descriptions of land use models are presented which were considered for their applicability to the Houston Area Test Site. These models are representative both of the prevailing theories of land use dynamics and of basic approaches to simulation. The models considered are: a model of metropolis, land use simulation model, emperic land use forecasting model, a probabilistic model for residential growth, and the regional environmental management allocation process. Sources of environmental/resource information are listed.

Petersburg, R. K.↗

Land Surface Verification Toolkit (LVT) - A Generalized Framework for Land Surface Model Evaluation

Model evaluation and verification are key in improving the usage and applicability of simulation models for real-world applications. In this article, the development and capabilities of a formal system for land surface model evaluation called the Land surface Verification Toolkit (LVT) is described. LVT is designed to provide an integrated environment for systematic land model evaluation and facilitates a range of verification approaches and analysis capabilities. LVT operates across multiple temporal and spatial scales and employs a large suite of in-situ, remotely sensed and other model and reanalysis datasets in their native formats. In addition to the traditional accuracy-based measures, LVT also includes uncertainty and ensemble diagnostics, information theory measures, spatial similarity metrics and scale decomposition techniques that provide novel ways for performing diagnostic model evaluations. Though LVT was originally designed to support the land surface modeling and data assimilation framework known as the Land Information System (LIS), it also supports hydrological data products from other, non-LIS environments. In addition, the analysis of diagnostics from various computational subsystems of LIS including data assimilation, optimization and uncertainty estimation are supported within LVT. Together, LIS and LVT provide a robust end-to-end environment for enabling the concepts of model data fusion for hydrological applications. The evolving capabilities of LVT framework are expected to facilitate rapid model evaluation efforts and aid the definition and refinement of formal evaluation procedures for the land surface modeling community.

Kumar, Sujay V.↗

A simple hydrologically based model of land surface water and energy fluxes for general circulation models

A generalization of the single soil layer variable infiltration capacity (VIC) land surface hydrological model previously implemented in the Geophysical Fluid Dynamics Laboratory (GFDL) general circulation model (GCM) is described. The new model is comprised of a two-layer characterization of the soil column, and uses an aerodynamic representation of the latent and sensible heat fluxes at the land surface. The infiltration algorithm for the upper layer is essentially the same as for the single layer VIC model, while the lower layer drainage formulation is of the form previously implemented in the Max-Planck-Institut GCM. The model partitions the area of interest (e.g., grid cell) into multiple land surface cover types; for each land cover type the fraction of roots in the upper and lower zone is specified. Evapotranspiration consists of three components: canopy evaporation, evaporation from bare soils, and transpiration, which is represented using a canopy and architectural resistance formulation. Once the latent heat flux has been computed, the surface energy balance is iterated to solve for the land surface temperature at each time step. The model was tested using long-term hydrologic and climatological data for Kings Creek, Kansas to estimate and validate the hydrological parameters, and surface flux data from three First International Satellite Land Surface Climatology Project Field Experiment (FIFE) intensive field campaigns in the summer-fall of 1987 to validate the surface energy fluxes.

Liang, XU↗

An update on land-ice modeling in the CESM

Mass loss from land ice, including the Greenland and Antarctic ice sheets as well as smaller glacier and ice caps, is making a large and growing contribution to global sea-level rise. Land ice is only beginning to be incorporated in climate models. The goal of the Land Ice Working Group (LIWG) is to develop improved land-ice models and incorporate them in CESM, in order to provide useful, physically-based sea-level predictions. LJWG efforts to date have led to the inclusion of a dynamic ice-sheet model (the Glimmer Community Ice Sheet Model, or Glimmer-CISM) in the Community Earth System Model (CESM), which was released in June 2010. CESM also includes a new surface-mass-balance scheme for ice sheets in the Community Land Model. Initial modeling efforts are focused on the Greenland ice sheet. Preliminary results are promising. In particular, the simulated surface mass balance for Greenland is in good agreement with observations and regional model results. The current model, however, has significant limitations: The land-ice coupling is one-way; we are using a serial version of Glimmer-CISM with the shallow-ice approximation; and there is no ice-ocean coupling. During the next year we plan to implement two-way coupling (including ice-ocean coupling with a dynamic Antarctic ice sheet) with a parallel , higher-order version of Glimmer-CISM. We will also add parameterizations of small glaciers and ice caps. With these model improvements, CESM will be able to simulate all the major contributors to 21st century global sea-level rise. Results of the first round of simulations should be available in time to be included in the Fifth Assessment Report (ARS) of the Intergovernmental Panel on Climate Change.

54 ENVIRONMENTAL SCIENCES↗

Eco-evolutionary optimality as a means to improve vegetation and land-surface models

Global vegetation and land-surface models embody interdisciplinary scientific understanding of the behaviour of plants and ecosystems, and are indispensable to project the impacts of environmental change on vegetation and the interactions between vegetation and climate. Furthermore, systematic errors and persistently large differences among carbon and water cycle projections by different models highlight the limitations of current process formulations. In this review, focusing on core plant functions in the terrestrial carbon and water cycles, we show how unifying hypotheses derived from eco-evolutionary optimality (EEO) principles can provide novel, parameter-sparse representations of plant and vegetation processes. We present case studies that demonstrate how EEO generates parsimonious representations of core, leaf-level processes that are individually testable and supported by evidence. EEO approaches to photosynthesis and primary production, dark respiration and stomatal behaviour are ripe for implementation in global models. EEO approaches to other important traits, including the leaf economics spectrum and applications of EEO at the community level are active research areas. Independently tested modules emerging from EEO studies could profitably be integrated into modelling frameworks that account for the multiple time scales on which plants and plant communities adjust to environmental change.

59 BASIC BIOLOGICAL SCIENCES↗

Investigating land surface effects on the moisture transport over South America with a moisture tagging model

Land-atmosphere interactions are a critical component of precipitation processes within the Amazon and the La Plata river basins (LPRB) in South America. The possible pathways through which the land surface can affect precipitation are: 1) by changing the amount of moisture available for precipitation (moisture recycling) and 2) by changing the atmospheric thermal structure and consequently affecting circulation patterns. In this study, the Weather Research and Forecasting (WRF) model with embedded water vapor tracers (WVT) is used to disentangle these relative contributions. Using WRF-WVT we track the moisture that originates from the Amazon basin over a 10-year period. It is estimated that Amazon evapotranspiration (ET) contributes to around 30% of the total precipitation over the Amazon and around 20% over the LPRB. Analyzing moisture transport from the Amazon to the LPRB, it is found that warm (cool) surface air temperature over the northwestern Argentine is linked to low level winds and likely to induce northerly (southerly) winds that intensify (weaken) moisture transport by changing continental-scale circulation patterns.

Yang, Zhao↗

Enabling Advanced Snow Physics within Land Surface Models Through an Interoperable Model-Physics Coupling Framework

Accurate estimation of snow accumulation and melt is a critical part of decision-making in snow-dominated watersheds. In this study, we demonstrate a flexible methodology to couple a detailed snow model, Crocus, separately to two different land surface models (LSMs), Noah-MP and Noah. The original LSMs and the coupled models (Noah-MP-Crocus and Noah-Crocus) are used to simulate snow depth, snow water equivalent, and other water and energy states and fluxes. The results of simulations are compared against a wide range of independent gridded and point scale reference datasets. Our results show that coupling the detailed snow model, Crocus, with the LSMs improves the snow depth and snow water equivalent relative to independent observations. Overall, larger improvements are obtained with coupling Crocus to the Noah LSM, with the coupled Noah-Crocus configuration reducing the RMSE and bias of snow depth from 2-12% and 57-75%, respectively, relative to Snow Data Assimilation System (SNODAS) and snow product from the University of Arizona. On the other hand, smaller improvements are obtained by coupling Crocus with Noah-MP. The Coupled Noah-MP-Crocus reduces the snow depth bias but slightly degrades the RMSE of snow depth and snow water equivalent. The corresponding impacts in other water budget terms such as evapotranspiration, soil moisture, and streamflow, however, are mixed, pointing to the significant need to improve the coupling assumptions of these processes within land models. Overall, the interoperable coupling framework demonstrated here offers the opportunity to include more detailed snow physics and processes, and to advance data assimilation systems through improved exploitation of information from snow remote sensing instruments.

Snow model↗

Modeling strategies and data needs for representing coastal wetland vegetation in land surface models

Vegetated coastal ecosystems sequester carbon rapidly relative to terrestrial ecosystems. Coastal wetlands are poorly represented in land surface models, but work is underway to improve process-based, predictive modeling of these ecosystems. Here, in this work, we identify guiding questions, potential simulations, and data needs to make progress in improving representation of vegetation in terrestrial–aquatic interfaces, with a focus on coastal and estuarine ecosystems. We synthesize relevant plant traits and environmental controls on vegetation that influence carbon cycling in coastal ecosystems. We propose that models include separate plant functional types (PFTs) for mangroves, graminoid salt marshes, and succulent salt marshes to adequately represent the variation in aboveground and belowground productivity between common coastal wetland vegetation types. We also discuss the drivers and carbon storage consequences of shifts in dominant PFTs. We suggest several potential approaches to represent the diversity in vegetation tolerance and adaptations to fluctuations in salinity and water level, which drive key gradients in coastal wetland ecosystems. Finally, we discuss data needs for parameterizing and evaluating model implementations of coastal wetland vegetation types and function.

54 ENVIRONMENTAL SCIENCES↗

Initial Land Use/Cover Distribution Substantially Affects Global Carbon and Local Temperature Projections in the Integrated Earth System Model

Initial land cover distribution varies among Earth system models, an uncertainty in initial conditions that can substantially affect carbon and climate projections. We use the integrated Earth System Model to show that a 3.9 M km2 difference in 2005 global forest area (9–14% of total forest area) generates uncertainties in initial atmospheric CO2 concentration, terrestrial carbon, and local temperature that propagate through a future simulation following the Representative Concentration Pathway 4.5. By 2095, the initial 6 ppmv uncertainty range increases to 9 ppmv and the initial 26 PgC uncertainty range in terrestrial carbon increases to 33 PgC. The initial uncertainty range in annual average local temperature of -0.74 to 0.96 °C persists throughout the future simulation, with a seasonal maximum in Dec-Jan-Feb. These results highlight the importance of accurately characterizing historical land use and land cover to reduce overall initial condition uncertainty.

Di Vittorio, Alan↗