Search NASA⌕ Search

SEARCH · Search NASA

Results for “Li extraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Measurement of shunt resistance and conduction band offset in Cu(In,Ga)Se 2 solar cells through joint analysis of temperature and intensity dependence of open-circuit voltage and photoluminescence

Joint analysis studies of open-circuit voltage and photoluminescence intensity (PL-I) are reported for CuIn 1-x GaxSe 2 (CIGSe) solar cells. A range of compositions are investigated, including constant x=0.35 and x=0.55 as well as a graded composition profile having a minimum of x=0.25. Both the open circuit voltage and PL-I are measured as functions of temperature and illumination intensity. With these two measurements, a full model-based fitting of the temperature and illumination dependence allows extraction of the effects of window layer band offset and shunt resistance, in addition to bulk and interface recombination parameters. Finally, to quantitatively analyze the two distinct measurements jointly, the absolute PL-I is measured to obtain quasi-Fermi-level splitting.

14 SOLAR ENERGY↗
DOE OSTI2025

Benchmarking fast-neutron response of 7 Li-enriched C 7 LYC scintillators: Simulations and experiment

New insights into the fast neutron response of 7 Li-enriched C 7 LYC scintillators have been obtained through detailed Geant4 simulations of 35 Cl(n,p) and 35 Cl(n, α) reactions that are primarily responsible for the fast neutron response of C 7 LYC. The light output of a 1” x1” C 7 LYC detector was simulated using the Birks equation for light quenching in scintillators. The simulations were benchmarked against neutron scattering data from a 12 C target obtained with a white neutron beam at the Los Alamos LANSCE facility and fourteen 1”x1” C 7 LYC detectors. Incident neutron energies extracted from time-of-flight measurements, and appropriate recoil corrections for the different detector angles were used to map the response of C 7 LYC to mono-energetic neutrons. Resonances in the 35 Cl(n,p) reaction cross-section below 3 MeV incident neutron energy were directly observed in C 7 LYC. The experimental data and simulations are compared with ENDF databases, as well as recent direct cross-section measurements of neutrons scattered from a 35 Cl target. In conclusion, the results suggest a scrutiny of the 35 Cl(n,p) and 35 Cl(n, α) cross sections at low energy in the ENDF library.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

Pretreatment of lignocellulosic feedstocks for cellulose nanofibril production

Cellulose nanofibrils (CNFs) have attracted a great deal of research interest in recent years attributable to the low cost and abundance of lignocellulosic biomass from which they can be extracted. These materials have potential applications in a wide array of areas because of their unique properties such as ultra-high aspect ratios and specific strengths. However, the high energy required to extract CNFs from biomass through fibrillation often makes them prohibitively expensive or negates their inherent sustainability. As such, a variety of biomass treatments prior to fibrillation have been investigated by researchers to reduce the energy requirements of CNF extraction, improve the efficacy of biomass fibrillation and subsequent processes, and/or impart functionality in resulting nanofibrils. In this work, both widely used and emerging mechanical, chemical, and enzymatic pretreatments used prior to fibrillation of lignocellulosic biomass for CNF extraction are reviewed. Attention is given to the effect of these various pretreatments on the properties of the resulting CNFs. Finally, the energy consumption in fibrillation processes with and without the use of pretreatments is compared, and future perspectives on challenges and opportunities in lignocellulosic feedstock pretreatments are discussed.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Uncovering novel mutational signatures by de novo extraction with SigProfilerExtractor

Mutational signature analysis is commonly performed in cancer genomic studies. Here, we present SigProfilerExtractor, an automated tool for de novo extraction of mutational signatures, and benchmark it against another 13 bioinformatics tools by using 34 scenarios encompassing 2,500 simulated signatures found in 60,000 synthetic genomes and 20,000 synthetic exomes. For simulations with 5% noise, reflecting high-quality datasets, SigProfilerExtractor outperforms other approaches by elucidating between 20% and 50% more true-positive signatures while yielding 5-fold less false-positive signatures. Applying SigProfilerExtractor to 4,643 whole-genome- and 19,184 whole-exome-sequenced cancers reveals four novel signatures. Two of the signatures are confirmed in independent cohorts, and one of these signatures is associated with tobacco smoking. In summary, this report provides a reference tool for analysis of mutational signatures, a comprehensive benchmarking of bioinformatics tools for extracting signatures, and several novel mutational signatures, including one putatively attributed to direct tobacco smoking mutagenesis in bladder tissues.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Observing differential spin currents by resonant inelastic X-ray scattering

Controlling spin currents, that is, the flow of spin angular momentum, in small magnetic devices, is the principal objective of spin electronics, a main contender for future energy-efficient information technologies. A pure spin current has never been measured directly because the associated electric stray fields and/or shifts in the non-equilibrium spin-dependent distribution functions are too small for conventional experimental detection methods optimized for charge transport. Here we report that resonant inelastic X-ray scattering (RIXS) can bridge this gap by measuring the spin current carried by magnons—the quanta of the spin wave excitations of the magnetic order—in the presence of temperature gradients across a magnetic insulator. This is possible due to the sensitivity of the momentum- and energy-resolved RIXS intensity to minute changes in the magnon distribution under non-equilibrium conditions. Furthermore, we use the Boltzmann equation in the relaxation time approximation to extract transport parameters, such as the magnon lifetime at finite momentum, essential for the realization of magnon spintronics.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Ultrafast photoinduced charge carrier dynamics of L-cysteine and oleylamine stabilized CsPbBr3 perovskite quantum dots coupled with gold nanoparticles

We have synthesized L-cysteine and oleylamine stabilized CsPbBr3 perovskite quantum dots (PQDs) and coupled them with gold nanoparticles (AuNPs). The PQDs and AuNPs, as well as their hybrid nanostructures (HNS), were characterized using UV–visible (UV–vis) and photoluminescence (PL) spectroscopy. The UV–vis spectra show absorption bands of the HNS at 503 and 520 nm, attributed mainly to PQDs and AuNPs, respectively. The PQDs show a strong excitonic PL band peaked at 513 nm from PQDs. The HR-TEM results show the formation of hybrid structures between PQDs and AuNPs, which is also supported by the PL quenching of the PQDs by the coupled AuNPs. Ultrafast dynamics of the exciton and charge carriers in the HNS and pristine PQD were studied using femtosecond transient absorption. Multiexponential fitting of the dynamic data revealed the existence of shallow and deep trap states in pristine PQDs and ultrafast electron transfer from PQDs to AuNPs in the HNS. A kinetic model was proposed to account for the key dynamic processes involved and to extract the time for electron transfer from PQDs to AuNPs in the HNS, found to be ∼2 ps. Dynamic processes in pristine PQDs are largely unchanged by HNS formation with AuNPs.

Chemistry↗
DOE OSTI2023

Deep learning-enabled natural language processing to identify directional pharmacokinetic drug–drug interactions

Background. During drug development, it is essential to gather information about the change of clinical exposure of a drug (object) due to the pharmacokinetic (PK) drug-drug interactions (DDIs) with another drug (precipitant). While many natural language processing (NLP) methods for DDI have been published, most were designed to evaluate if (and what kind of) DDI relationships exist in the text, without identifying the direction of DDI (object vs. precipitant drug). Here we present a method for the automatic identification of the directionality of a PK DDI from literature or drug labels. Methods. We reannotated the Text Analysis Conference (TAC) DDI track 2019 corpus for identifying the direction of a PK DDI and evaluated the performance of a fine-tuned BioBERT model on this task by following the training and validation steps prespecified by TAC. Results. This initial attempt showed the model achieved an F-score of 0.82 in identifying sentences as containing PK DDI and an F-score of 0.97 in identifying object versus precipitant drugs in those sentences. Discussion and conclusion. Despite a growing list of NLP methods for DDI extraction, most of them use a common set of corpora to perform general purpose tasks (e.g., classifying a sentence into one of several fixed DDI categories). There is a lack of coordination between the drug development and biomedical informatics method development community to develop corpora and methods to perform specific tasks (e.g., extract clinical exposure changes due to PK DDI). We hope that our effort can encourage such a coordination so that more “fit for purpose” NLP methods could be developed and used to facilitate the drug development process.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Ultrasonic nondestructive diagnosis of lithium-ion batteries with multiple frequencies

Accurately estimating the state of charge (SoC) in battery management systems (BMSs) requires the measurement of numerous parameters and advanced algorithms. This work studies multifrequency ultrasonic waves to estimate the SoC of Li-ion batteries by sensing the material changes during charge/discharge. A pouch-type LiNi 0.6 Mn 0.2 Co 0.2 O 2 (NMC622) graphite battery cell is designed and fabricated with a capacity of 2.4 Ah. Different ultrasonic testing setups are explored to determine the optimal testing parameters for the battery. An ultrasonic monitoring system is developed to monitor the battery during charge/discharge at 750 kHz, 1 MHz, and 1.5 MHz. Signal processing algorithms are proposed for extracting three ultrasonic features—amplitude, wave velocity, and attenuation. In a three-cycle test, the amplitude histories do not show clear correlations with the SoC. The wave velocities of all three frequencies have an approximately linear relationship with the SoC, which can be used for SoC estimation. Hysteresis behavior is observed for the wave velocity in terms of a larger slope in the discharge process and velocity drop after a close charge/discharge cycle. The wave attenuation is able to capture the material phase transitions during charge/discharge.

25 ENERGY STORAGE↗
DOE OSTI2026

A Dendrite-Resistant Sodium/Porous-Carbon Anode for Solid-State Batteries – Strategies and Challenges for Low-Pressure Operation

Sodium solid-state batteries (Na-SSB) have gained interest recently due to the abundance of Na over Li, but they still tend to fail due to dendrites under practical current densities and cycling capacities. To overcome this, Na-SSBs are frequently tested with impractically high applied pressure. In this work, a porous carbon interfacial layer is utilized in conjunction with Na-ß”-Al2O3 solid electrolytes to enable Na-cycling at milder cell pressures. This sodium/porous carbon layer enables improved solid-state Na cycling in symmetric cells, up to a current density of 10 mA cm-2 at 25 °C. Cycling up to 1 mAh cm-2 is challenging with low pressure, but 1 mAh cm-2 capacity can be reliably cycled at 1 mA cm-2 at an elevated temperature of 60 °C in symmetric cells. Finally, the evolution of the interface and sodium/carbon anode is evaluated with cryogenic ion-milling and cross-sectional imaging revealing that, depending on testing temperature, pressure, current density, and capacity, void formation, Na-extraction from porous carbon, delamination of the porous carbon matrix, or a combination of these occurs at the interface between Na-metal and BASE. Despite this, excellent dendrite resistance is achieved, and a full-cell design utilizing a Na-transition metal oxide cathode is still able to achieve an areal capacity of ~ 2.7 mAh cm-2 at 0.125 mA cm-2. This work demonstrates an alternative pathway toward a Na-metal anode for Na-SSBs without the requirement of excessive stack pressure.

low-cost↗
DOE OSTI2021

Strain Effects on Rashba Spin–Orbit Coupling of 2D Hole Gases in GeSn/Ge Heterostructures

A demonstration of 2D hole gases in GeSn/Ge heterostructures with a mobility as high as 20 000 cm 2 V –1 s –1 is given. Both the Shubnikov–de Haas oscillations and integer quantum Hall effect are observed, indicating high sample quality. The Rashba spin-orbit coupling (SOC) is investigated via magneto-transport. Further, a transition from weak localization to weak anti-localization is observed, which shows the tunability of the SOC strength by gating. The magneto-transport data are fitted to the Hikami–Larkin–Nagaoka formula. The phase-coherence and spin-relaxation times, as well as spin-splitting energy and Rashba coefficient of the k-cubic term, are extracted. Furthermore, the analysis reveals that the effects of strain and confinement potential at a high fraction of Sn suppress the Rashba SOC caused by the GeSn/Ge heterostructures.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Nano-spectroscopy of excitons in atomically thin transition metal dichalcogenides

Abstract Excitons play a dominant role in the optoelectronic properties of atomically thin van der Waals (vdW) semiconductors. These excitons are amenable to on-demand engineering with diverse control knobs, including dielectric screening, interlayer hybridization, and moiré potentials. However, external stimuli frequently yield heterogeneous excitonic responses at the nano- and meso-scales, making their spatial characterization with conventional diffraction-limited optics a formidable task. Here, we use a scattering-type scanning near-field optical microscope (s-SNOM) to acquire exciton spectra in atomically thin transition metal dichalcogenide microcrystals with previously unattainable 20 nm resolution. Our nano-optical data revealed material- and stacking-dependent exciton spectra of MoSe 2 , WSe 2 , and their heterostructures. Furthermore, we extracted the complex dielectric function of these prototypical vdW semiconductors. s-SNOM hyperspectral images uncovered how the dielectric screening modifies excitons at length scales as short as few nanometers. This work paves the way towards understanding and manipulation of excitons in atomically thin layers at the nanoscale.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Dataset of tensile properties for sub-sized specimens of nuclear structural materials

Mechanical testing with sub-sized specimens plays an important role in the nuclear industry, facilitating tests in confined experimental spaces with lower irradiation levels and accelerating the qualification of new materials. The reduced size of specimens results in different material behavior at the microscale, mesoscale, and macroscale, in comparison to standard-sized specimens, which is referred to as the “specimen size effect.” Although analytical models have been proposed to correlate the properties of sub-sized specimens to standard-sized specimens, these models lack broad applicability across different materials and testing conditions. The objective of this study is to create the first large public dataset of tensile properties for sub-sized specimens used in nuclear structural materials. We performed an extensive literature review of relevant publications and extracted over 1,000 tensile testing records comprising 55 columns including material type and composition, manufacturing information, irradiation conditions, specimen dimensions, and tensile properties. The dataset can serve as a valuable resource to investigate the specimen size effect and develop computational methods to correlate the tensile properties of sub-sized specimens.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Slicing Newton spheres with a two-camera 3D imaging system

We demonstrate a simple approach to achieve three-dimensional ion momentum imaging. The method employs two complementary metal–oxide–semiconductor cameras in addition to a standard microchannel plates/phosphor screen imaging detector. The two cameras are timed to measure the decay of luminescence excited by ion hits to extract the time of flight. The achieved time resolution is better than 10 ns, which is mainly limited by camera jitters. A better than 5 ns resolution can be achieved when the jitter is suppressed.

Chemistry↗
DOE OSTI2025

3 He +𝛼 resonances in 7 Be

Resonances in 7 Be which decay into the 3 He+α exit channel have been measured with improved precision using preexisting data sets. The energy and width of the J π =7/2 - state have been extracted from an invariant-mass study of projectile-breakup products originating from interactions of an E/A=10.7-MeV 10 C beam on Be and C targets. The excitation energy of this state (from the pole of the S-matrix) is determined to be E*=4.545(6)~MeV, a factor of 8 improvement in precision as compared to the ENSDF value. This improvement is enabled by fine tuning the detector calibrations using calibration resonances in 6 Li, 7 Li, 6 Be, 9 B, and 12 C whose decay energies are known to high precision. The J π =7/2- resonance in 7 Be can now itself be used as a calibration resonance in invariant-mass experiments. This utility is particularly helpful for 3 He energy calibrations of CsI(Tl) detectors which are often used in detector arrays employed for measurements with fast beams. This utility is demonstrated with a data set associated with E/A=70 MeV 7 Be beams which are inelastically excited to the 7/2 - and 5/2 - 1 resonances. Again using the pole of the S-matrix as the definition of the resonance parameters, the fitted excitation energy of the 5/2 - 1 resonance is 6.376(17) MeV, approximately 300 keV lower than the ENSDF value. Finally, its width of 565(4) keV is roughly half of the ENSDF value.

energy levels↗
DOE OSTI2026

Measuring quasiparticle dynamics for particle impact reconstruction in a superconducting qubit chip

Quasiparticle poisoning following particle impacts poses a significant challenge to the development of fault-tolerant superconducting quantum computers, as a sudden excess of quasiparticles can simultaneously degrade the coherence of multiple qubits across large device arrays. In this work, we present a statistical analysis that models the time evolution of radiation-induced qubit energy relaxation through quasiparticle density dynamics. This study provides insight into quasiparticle loss processes by distinguishing between recombination and trapping decay channels and assessing their respective impact on qubit performance. We precisely measure quasiparticle recombination in multiple transmon qubits and uncover an unexpected dependence of qubit relaxation dynamics on deposited energy. By linking correlated relaxation events across qubits to ballistic phonon propagation, we introduce a statistical localization approach to extract the energy deposited in the substrate, which is in good agreement with Monte Carlo simulation. This work establishes the quantitative framework for using an arbitrary subset of superconducting transmon qubits in a QPU as energy-resolving witness particle detectors.

Celi, E. [Northwestern U.]↗
DOE OSTI2026

Cost-effective valorization of 2,3-butanediol to high-value chemicals and jet fuel

Here, this work outlines an optimized process for converting 2,3-butanediol (BDO) into sustainable aviation fuel (SAF) and C4 chemicals. BDO is reactively separated from fermentation broth by forming dioxolanes, which are converted to isobutyraldehyde, methyl ethyl ketone (MEK), and 1,3-butadiene. These intermediates are reduced and dehydrated over Cu/ZSM-5 to form alkenes, which can be oligomerized and hydrotreated to jet-range alkanes. Previous BDO-dioxolane-alkene processes are limited by the requirement for a continuous aldehyde source for dioxolane formation. Brønsted acidic zeolites catalyze dioxolane deacetalization to form isobutyraldehyde and MEK in a >2:1 molar ratio, providing an internal, recyclable aldehyde source. Dioxolane formation optimization was performed to achieve >95% dioxolane yields over Amberlyst-15 and minimize isobutyraldehyde recycle. The overall BDO-dioxolane-fuel process yields an alkane mixture that enables at least a 50% v/v blend with Jet-A. Techno-economic analyses and life cycle assessments for this BDO-dioxolane-fuel process yield scenarios with <$2.50 per gallon gas equivalent and >58% reduction in CO2 emissions.

2,3-butanediol↗
DOE OSTI2026

Investigating trends in actinide covalency and magnetism with 35/37 Cl SSNMR spectroscopy and first-principles calculations

Solid-state NMR (SSNMR) spectroscopy is a powerful technique for studying actinide chemistry but has been significantly limited due to the complex paramagnetism, and radiological hazards presented by these materials. Lanthanide and actinide salts often feature magnetic ordering and can be paramagnetic, ferromagnetic, or antiferromagnetic depending on temperature and electronic structure. Paramagnetic interactions can manifest in SSNMR both as secular spectral shifts and/or couplings as well as contributions from non-secular relaxation. Both effects can be directly measured with NMR and used to extrapolate rich chemical information such as coordination environments, bonding characteristics, local molecular dynamics, and correlation times. Typically, these studies are carried out on high-γ and highly abundant NMR-active isotopes (e.g., 1 H, 6/7 Li, 19 F, 23 Na, etc.) or on enriched rare isotopes (e.g., 2 H and 17 O), which can be expensive. Herein, we present a facile methodology to measure the 35/37 Cl electric-field gradient (EFG) and paramagnetic shift anisotropy (SA) tensor components using static wideline SSNMR measurements of LaCl 3 , NdCl 3 , UCl 3 , and UCl 4 . The static powder spectra were measured with both 35 Cl and 37 Cl SSNMR to increase the fidelity of the extracted tensor parameters. Variable temperature NMR of a select case confirms the Curie–Weiss paramagnetism. Relaxation measurements of both nuclei further corroborate observations owing to the paramagnetic relaxation enhancement and reveal simultaneous quadrupolar relaxation mechanisms. Density functional theory (DFT) calculations using Hubbard U corrections to the uranium valence orbitals show excellent agreement with experimental EFG tensor parameters and help describe the bonding characteristics in these lanthanide and actinide systems.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗