Search NASA⌕ Search

SEARCH · Search NASA

Results for “Local Field”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

In-Flight Boundary-Layer Transition on a Large Flat Plate at Supersonic Speeds

A flight experiment was conducted to investigate the pressure distribution, local flow conditions, and boundary-layer transition characteristics on a large flat plate in flight at supersonic speeds up to Mach 2.0. The primary objective of the test was to characterize the local flow field in preparation for future tests of a high Reynolds number natural laminar flow test article. The tests used a F-15B testbed aircraft with a bottom centerline mounted test fixture. A second objective was to determine the boundary-layer transition characteristics on the flat plate and the effectiveness of using a simplified surface coating for future laminar flow flight tests employing infrared thermography. Boundary-layer transition was captured using an onboard infrared imaging system. The infrared imagery was captured in both analog and digital formats. Surface pressures were measured with electronically scanned pressure modules connected to 60 surface-mounted pressure orifices. The local flow field was measured with five 5-hole conical probes mounted near the leading edge of the test fixture. Flow field measurements revealed the local flow characteristics including downwash, sidewash, and local Mach number. Results also indicated that the simplified surface coating did not provide sufficient insulation from the metallic structure, which likely had a substantial effect on boundary-layer transition compared with that of an adiabatic surface. Cold wall conditions were predominant during the acceleration to maximum Mach number, and warm wall conditions were evident during the subsequent deceleration. The infrared imaging system was able to capture shock wave impingement on the surface of the flat plate in addition to indicating laminar-to-turbulent boundary-layer transition.

Banks, Daniel W.↗

Membrane potential sensing: Material design and method development for single particle optical electrophysiology

We review the development of “single” nanoparticle-based inorganic and organic voltage sensors, which can eventually become a viable tool for “non-genetic optogenetics.” The voltage sensing is accomplished with optical imaging at the fast temporal response and high spatial resolutions in a large field of view. Inorganic voltage nanosensors utilize the Quantum Confined Stark Effect (QCSE) to sense local electric fields. Engineered nanoparticles achieve substantial single-particle voltage sensitivity (~2% Δλ spectral Stark shift up to ~30% ΔF/F per 160 mV) at room temperature due to enhanced charge separation. A dedicated home-built fluorescence microscope records spectrally resolved images to measure the QCSE induced spectral shift at the single-particle level. Biomaterial based surface ligands are designed and developed based on theoretical simulations. The hybrid nanobiomaterials satisfy anisotropic facet-selective coating, enabling effective compartmentalization beyond non-specific staining. Self-spiking- and patched-HEK293 cells and cortical neurons, when stained with hybrid nanobiomaterials, show clear photoluminescence intensity changes in response to membrane potential (MP) changes. Organic voltage nanosensors based on polystyrene beads and nanodisk technology utilize Fluorescence (Förster) Resonance Energy Transfer (FRET) to sense local electric fields. Voltage sensing FRET pairs achieve voltage sensitivity up to ~35% ΔF/F per 120 mV in cultures. Non-invasive MP recording from individual targeted sites (synapses and spines) with nanodisks has been realized. However, both of these QCSE- and FRET-based voltage nanosensors yet need to reach the milestone of recording individual action potentials from individual targeted sites.

59 BASIC BIOLOGICAL SCIENCES↗

The nonlinear evolution of magnetized solar filaments

Thermal instability driven by optically thin radiation is believed to initiate the formation of plasma filaments in the solar corona. The fact that filaments are observed generally to separate regions of opposite, line-of-sight, magnetic polarity in the underlying photosphere suggests that filament formation requires the presence of a highly sheared, local magnetic field. Two-dimensional, nonlinear, magnetohydrodynamic simulations of the local genesis and growth of solar filaments in a force-free, sheared, magnetic field were performed, and the evolution of generic perturbations possessing broad spatial profiles was traced. It was found that simulations of the evolution of initial random-noise perturbations produce filamentary plasma structures that exhibit densities and temperatures characteristic of observed solar filaments. Furthermore, in each of these simulations, the filament axis lies at a finite angle with respect to the local magnetic field, consistent with solar observations.

Sparks, L.↗

Kinetic Model of Electric Potentials in Localized Collisionless Plasma Structures under Steady Quasi-gyrotropic Conditions

Localized plasma structures, such as thin current sheets, generally are associated with localized magnetic and electric fields. In space plasmas localized electric fields not only play an important role for particle dynamics and acceleration but may also have significant consequences on larger scales, e.g., through magnetic reconnection. Also, it has been suggested that localized electric fields generated in the magnetosphere are directly connected with quasi-steady auroral arcs. In this context, we present a two-dimensional model based on Vlasov theory that provides the electric potential for a large class of given magnetic field profiles. The model uses an expansion for small deviation from gyrotropy and besides quasineutrality it assumes that electrons and ions have the same number of particles with their generalized gyrocenter on any given magnetic field line. Specializing to one dimension, a detailed discussion concentrates on the electric potential shapes (such as "U" or "S" shapes) associated with magnetic dips, bumps, and steps. Then, it is investigated how the model responds to quasi-steady evolution of the plasma. Finally, the model proves useful in the interpretation of the electric potentials taken from two existing particle simulations.

Schindler, K.↗

Growth of a diffusion flame in the field of a vortex

In the present study of the growth of a diffusion flame in the field of a vortex, the motion in the core is converted into a solid body rotation. The flame extension and distortion kinematics are presented, and the effect of the local flow field on local flame structure is analyzed in detail. The combustion field is found to consist of a totally reacted core region whose radius is time-dependent, and an external flame region which consists of a pair of spiral arms that extend at large radii toward their original positions on the horizontal axis. Two similarity rules are formulated which are independent of kinematic viscosity.

Marble, F. E.↗

Preferential O(+) heating in the topside ionosphere

Observations of preferential heating of the ionospheric majority ion species O(+), are reported. The heating took the form of a hot (few electron volts) tail in the upgoing thermal O(+). No such hot tail was observed in the light ion distributions. An event observed at 700-800 km altitude was highly anisotropic with a much hotter tail transverse to the local magnetic field. A series of events observed at 250-375 km were more nearly isotropic with respect to the local magnetic field. Broadband plasma wave emission near the lower hybrid resonance was observed in conjunction with the high altitude event. The low altitude events were tightly correlated with auroral electron precipitation, but broadband lower hybrid emission was much reduced. The observed hot tail formation is sufficient to produce significant O(+) ion transport to higher altitude auroral acceleration regions.

Moore, T. E.↗

Interpretable Deep Learning for Advancing Field-Enhanced Catalysis

This DOE Early Career project developed a physics-informed, interpretable AI-and-modeling framework to understand and exploit electric-field effects in heterogeneous catalysis, with ammonia cracking and synthesis as a representative pathway. The team built and validated methods to map local electric fields on metal surfaces and nanoparticles, showing that low-coordination features (tips/edges/corners) can concentrate fields by several-fold relative to flat facets. Using DFT-generated datasets, the project created physics-guided machine learning models that rapidly predict local electric fields and field-dependent adsorption energetics with near-DFT accuracy while reducing computational cost by orders of magnitude. These predictions were integrated with microkinetic modeling to quantify how field-dipole interactions reshape reaction energetics and mechanisms, enabling large increases in predicted catalytic rates and substantial reductions in operating temperature under favorable field conditions. To accelerate discovery of earth-abundant catalysts, the project combined interpretable ML screening (with electronic-structure descriptors identified as key drivers) with a generative inverse-design workflow based on diffusion models and physics constraints. The resulting closed-loop approach, linking simulation, mechanistic modeling, and AI, provides reusable tools and datasets for designing catalysts and operating conditions in field-enhanced catalysis, with broad relevance to electrostatic catalysis, plasma catalysis, electrocatalysis, and other energy-related chemical transformations.

30 DIRECT ENERGY CONVERSION↗

A framework for modelling kinematic measurements in gravity field applications

To assess the resolution of the local gravity field from kinematic measurements, a state model for motion in the gravity field of the earth is formulated. The resulting set of equations can accommodate gravity gradients, specific force, acceleration, velocity and position as input data and can take into account approximation errors as well as sensor errors.

Schwarz, K. P.↗

Global Aspects of the Earth's Magnetopause

Measurable characteristics of the magnetopause are discussed. The Earth's magnetopause is a thin magnetic discontinuity separating the shocked, magnetized plasma of the solar wind from a more tenuous plasma contained by the geomagnetic field. This external magnetosheath plasma flows around the magnetosphere with characteristics that are in approximate agreement with gas dynamic theory. The interplanetary magnetic field carried by this plasma becomes draped over the magnetosphere and its orientation relative to the local geomagnetic field determines the local magnetopause current. Solar wind pressure and interplanetary field direction control the geocentric distance to the magnetopause with high pressures and southware fields moving the equatorial magnetopause to a more earthward location. Evidence suggests that the magnetopause is Kelvin-Helmholtz unstable and surface waves are propagating toward the magnetotail.

Fairfield, D. H.↗

Motility of acoustically powered micro-swimmers in a liquid crystalline environment

Suspensions of microswimmers in liquid crystals demonstrate remarkably complex dynamics and serve as a model system for studying active nematics. So far, experimental realization of microswimmers suspended in liquid crystalline media has relied on biological microorganisms that impose strict limitations on the compatible media and makes it difficult to regulate activity. Here, we demonstrate that acoustically powered bubble microswimmers can efficiently self-propel in a lyotropic liquid crystal. The velocity of the swimmers is controlled by the amplitude of the acoustic field. Histograms of swimming directions with respect to the local nematic field reveal a bimodal distribution: the swimmers tend to either fully align with or swim perpendicular to the director field of the liquid crystal, occasionally switching between these two states. The bubble-induced streaming from a swimmer locally melts the liquid crystal and produces topological defects at the tail of the swimmer. Further, we show that the defect proliferation rate increases with the angle between the swimmer's velocity and the local orientation of the director field.

36 MATERIALS SCIENCE↗

The formation of arcs in the dynamic spectra of Jovian decameter bursts

A model is presented that can account for several features of the dynamic spectral arcs observed at decameter wavelengths by the planetary radio astronomy experiment on Voyagers 1 and 2. It is shown that refraction of an extraordinary mode wave initially excited nearly orthogonal to the local magnetic field is significantly influenced by the local plasma density, being greater the higher the density. It is assumed that the source of the decameter radiation lies along the L = 6 flux tube and that the highest frequencies are produced at the lowest altitudes, where both the plasma density and magnetic field gradients are largest. It is further assumed that the decameter radiation is emitted into a thin conical sheet, consistent with both observation and theory. In the model the emission cone angle of the sheet is chosen to vary with frequency so that it is relatively small at both high and low frequencies, but approximately 80 deg at intermediate frequencies. The resulting emission pattern as seen by a distant observer is shown to resemble the observed arc pattern. The model is compared and contrasted with examples of Voyager radio data.

Goldstein, M. L.↗

Creation of Single-Photon Emitters in WSe 2 Monolayers Using Nanometer-Sized Gold Tips

Due to their tunable bandgaps and strong spin-valley locking, transition metal dichalcogenides constitute a unique platform for hosting single-photon emitters. Here, we present a versatile approach for creating bright single-photon emitters in WSe 2 monolayers by the deposition of gold nanostars. Our molecular dynamics simulations reveal that the formation of the quantum emitters is likely caused by the highly localized strain fields created by the sharp tips of the gold nanostars. The surface plasmon modes supported by the gold nanostars can change the local electromagnetic fields in the vicinity of the quantum emitters, leading to their enhanced emission intensities. Moreover, by correlating the emission energies and intensities of the quantum emitters, we are able to associate them with two types of strain fields and derive the existence of a low-lying dark state in their electronic structures. The findings here are highly relevant for the development and understanding of single-photon emitters in transition metal dichalcogenide materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Variability in the Propagation Phase of CFD-Based Noise Prediction: Summary of Results From Category 8 of the BANC-III Workshop

The usage of Computational Fluid Dynamics (CFD) in noise prediction typically has been a two part process: accurately predicting the flow conditions in the near-field and then propagating the noise from the near-field to the observer. Due to the increase in computing power and the cost benefit when weighed against wind tunnel testing, the usage of CFD to estimate the local flow field of complex geometrical structures has become more routine. Recently, the Benchmark problems in Airframe Noise Computation (BANC) workshops have provided a community focus on accurately simulating the local flow field near the body with various CFD approaches. However, to date, little effort has been given into assessing the impact of the propagation phase of noise prediction. This paper includes results from the BANC-III workshop which explores variability in the propagation phase of CFD-based noise prediction. This includes two test cases: an analytical solution of a quadrupole source near a sphere and a computational solution around a nose landing gear. Agreement between three codes was very good for the analytic test case, but CFD-based noise predictions indicate that the propagation phase can introduce 3dB or more of variability in noise predictions.

Lopes, Leonard↗

Magnetically-conformed, Variable Area Discharge Chamber for Hall Thruster, and Method

The invention is a Hall thruster that incorporates a discharge chamber having a variable area channel including an ionization zone, a transition region, and an acceleration zone. The variable area channel is wider through the acceleration zone than through the ionization zone. An anode is located in a vicinity of the ionization zone and a cathode is located in a vicinity of the acceleration zone. The Hall thruster includes a magnetic circuit which is capable of forming a local magnetic field having a curvature within the transition region of the variable area channel whereby the transition region conforms to the curvature of the local magnetic field. The Hall thruster optimizes the ionization and acceleration efficiencies by the combined effects of the variable area channel and magnetic conformity.

Hofer, Richard R.↗

Lower-Hybrid-Drift Vortices in the Electron-Scale Magnetic Reconnection Layer

Lower-hybrid-drift waves driving vortical flows have recently been discovered in the electron current layer during magnetic reconnection in the terrestrial magnetotail. Yet, spacecraft measurements cannot address how pervasive the waves are. In this work, we perform three-dimensional particle-in-cell simulations of guide field reconnection to demonstrate that electron vortices driven by the lower-hybrid-drift instability (LHDI) are excited immediately downstream from the electron jet reversal in 3-D channels of enhanced electron outflow. The resulting fluctuations generate a series of alternating vortices, producing magnetic field perturbations opposing and enhancing the local guide field and causing kinking of the enhanced electron outflow and patches of increased current. Our results demonstrate for the first time that LHDI exists in the electron current layer and enhanced outflow channels, providing a conceptual breakthrough on the LHDI in reconnection.

58 GEOSCIENCES↗

Effects of reaction control system jet simulation on the stability and control characteristics of a 0.015-scale space shuttle orbiter model in the Ames Research Center 3.5-foot hypersonic wind tunnel

An experimental investigation was performed in the Ames Research Center 3.5-Foot Hypersonic Wind Tunnel to obtain detailed effects which interactions between the RCS jet flow field and the local orbiter flow field have on orbiter hypersonic stability and control characteristics. Six-component force data were obtained through an angle-of-attack range of 15 to 35 deg with 0 deg angle of sideslip. The test was conducted with yaw, pitch and roll jet simulation at a free-stream Mach number of 10.3. These data simulate two SSV reentry flight conditions at Mach numbers of 28.3 and 10.3. Fuselage base pressures and pressures on the nonmetric RCS pods were obtained in addition to the basic force measurements. Model 42-0 was used for these tests.

Dziubala, T. J.↗

Auroral vector electric field and particle comparisons. II - Electrodynamics of an arc

The paper reports the results of energetic auroral electron and vector electric field measurements taken near and above a discrete auroral form and discusses their electrodynamic implications. Height-integrated Hall and Pedersen conductivities are computed in a quantitative fashion along the rocket payload trajectory. These conductivities, together with the electric fields, are used to describe the local auroral electrojet current system and to demonstrate an inverse relationship between the local electric field intensity and the height-integrated Pedersen conductivity. An analysis is presented of the divergence of both the electric field and the horizontal current as an effort to infer space charge densities and magnetic-field-aligned electrical currents near an auroral arc.

Evans, D. S.↗