SEARCH · Search NASA

Results for “MISSILE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

All sources NASA NTRS DOE OSTI

NASA NTRS1984

Air intakes for a probative missile of rocket ramjet

The methods employed to test air intakes for a supersonic guided ramjet powered missile being tested by ONERA are described. Both flight tests and wind tunnel tests were performed on instrumented rockets to verify the designs. Consideration as given to the number of intakes, with the goal of delivering the maximum pressure to the engine. The S2, S4, and S5 wind tunnels were operated at Mach nos. 1.5-3 for the tests, which were compartmentalized into fuselage-intake interaction, optimization of the intake shapes, and the intake performance. Tests were performed on the length and form of the ogive, the presence of grooves, the height of traps in the boundary layer, the types and number of intakes and the lengths and forms of diffusers. Attention was also given to the effects of sideslip, effects of the longitudinal and circumferential positions of the intakes were also examined. Near optimum performance was realized during Mach 2.2 test flights of the prototype rockets.

Laruelle, G.↗

NASA NTRS1983

Experimental determination of the inertia constants of an airplane or of a missile

The possibility to measure the inertia constants of an airplane or of a missile by a unique experimental set up without having to materialize axes of rotation was investigated. It is sufficient to suspend the structure appropriately, to obtain the six natural modes determined by the suspension and to introduce these results as data into a computer. If the structure is very flexible it is necessary to take into account the first natural modes of deformation. Experiments on rigid and flexible models led to precise results and allow consideration of full scale measurements. The final goal is to provide, by a standard ground vibration test completed by the measured characteristics of the suspension modes, the set of data necessary for flutter calculations and for the determination of all the inertia constants.

Loiseau, H.↗

NASA NTRS1984

Mach 6 flow-field and boundary-layer surveys beneath the forebody of an airbreathing missile

A wind tunnel investigation has been conducted to determine the flow characteristics of the shock layer beneath the forebody of a hypersonic, airbreathing missile incorporating an aft-mounted inlet. In the inviscid part of the flow field, the measured parameters were in agreement with those predicted by a three-dimensional Method of Characteristics theory. At test conditions matching full scale Mach and Reynolds numbers at an altitude for maximum L/D cruise, boundary layer transition occurred downstream of the inlet face. While this means that a full size vehicle would have a more easily separated boundary layer, it is noted that the Reynolds number discrepancy between wind tunnel and actual flight conditions may result in a movement of the transition point to somewhere upstream of the inlet.

Johnston, P. J.↗

NASA NTRS1984

Prediction of the vortex wake for noncircular missiles in supersonic flow

Engineering prediction methods with the capability to calculate induced effects of lee-side separation vorticity associated with circular and noncircular missiles at high angles of attack in supersonic flow are compared. Methods of interest include a discrete vortex cloud technique, concentrated vortex models, and solutions of Euler's equations with specified separation. Comparison of measured and predicted surface pressure distributions and flow field surveys are presented for bodies with circular and elliptic cross sections. Two flow models for computing lee-side vortex-induced effects on control fins in the vicinity of the vortex field are examined, and suggestions regarding the appropriate flow model for specific situations are included.

Mendenhall, M. R.↗

NASA NTRS1984

Optical Kalman filtering for missile guidance

Optical systolic array processors constitute a powerful and general-purpose set of optical architectures with high computational rates. In this paper, Kalman filtering, a novel application for these architectures, is investigated. All required operations are detailed; their realization by optical and special-purpose analog electronics are specified; and the processing time of the system is quantified. The specific Kalman filter application chosen is for an air-to-air missile guidance controller. The architecture realized in this paper meets the design goal of a fully adaptive Kalman filter which processes a measurement every 1 msec. The vital issue of flow and pipelining of data and operations in a systolic array processor is addressed. The approach is sufficiently general and can be realized on an optical or digital systolic array processor.

Casasent, D.↗

NASA NTRS1984

Shock capturing finite difference algorithms for supersonic flow past fighter and missile type configurations

The construction of a reliable, shock capturing finite difference method to solve the Euler equations for inviscid, supersonic flow past fighter and missile type configurations is highly desirable. The numerical method must have a firm theoretical foundation and must be robust and efficient. It should be able to treat subsonic pockets in a predominantly supersonic flow. The method must also be easily applicable to the complex topologies of the aerodynamic configuration under consideration. The ongoing approach to this task is described and for steady supersonic flows is presented. This scheme is the basic numerical method. Results of work obtained during previous years are presented.

Osher, S.↗

NASA NTRS1982

Computer program for post-flight evaluation of the control surface response for an attitude controlled missile

A FORTRAN IV coded computer program is presented for post-flight analysis of a missile's control surface response. It includes preprocessing of digitized telemetry data for time lags, biases, non-linear calibration changes and filtering. Measurements include autopilot attitude rate and displacement gyro output and four control surface deflections. Simple first order lags are assumed for the pitch, yaw and roll axes of control. Each actuator is also assumed to be represented by a first order lag. Mixing of pitch, yaw and roll commands to four control surfaces is assumed. A pseudo-inverse technique is used to obtain the pitch, yaw and roll components from the four measured deflections. This program has been used for over 10 years on the NASA/SCOUT launch vehicle for post-flight analysis and was helpful in detecting incipient actuator stall due to excessive hinge moments. The program is currently set up for a CDC CYBER 175 computer system. It requires 34K words of memory and contains 675 cards. A sample problem presented herein including the optional plotting requires eleven (11) seconds of central processor time.

Knauber, R. N.↗

NASA NTRS1986

Effects of some geometric variations on missile aerodynamic characteristics at supersonic speeds

A summary of some results from tests of a wing-body general research missile model is presented for a Mach number range up to 4.63. A basic ogive-cylinder body with a length-to-diameter ratio of 10 was used to which was attached a series of wing planforms. The planforms included a family of delta wings and a family of rectangular wings having a constant root chord but varying spans so that wings of constant exposed area could be compared. In addition, a cranked-tip planform was included and a rectangular planform with reduced chord. Some results are presented for wing-body-tail configurations - one utilizing a cranked wing planform and one with wings having a constant root chord and span, but tip chords that were 0, 20, and 40 percent of the root chord.

Spearman, M. L.↗

NASA NTRS1986

Mach 6 flow field surveys beneath the forebody of an airbreathing missile

Wall static, local stream static, and pitot pressure surveys were made on the windward side of a hypersonic airbreathing missile at full-scale length Reynolds numbers. In the inviscid part of the flow field, the experimental massflow ratios agreed with trends predicted by a three-dimensional method-of-characteristics solution. At a longitudinal station 3.5 diameters downstrea of the nose, the boundary layer was transitional or turbulent at zero incidence but became laminar as the angle of attack increased. The bell-shaped distribution of the boundary layer across the width of the body affected the mass flow distribution out to the bow shock and decreased the mass flow available the engine inlet.

Johnson, P. J.↗

NASA NTRS1986

Euler analysis of an elliptic missile body

The Euler code FL057 was applied to a blunt nose smooth surface missile body shape. A range of angle of attacks was analyzed at Mach numbers of 0.55 and 2.0. A Mach number sweep from 0.55 to 2.0 was run for 12 degrees angle of attack. Experimental force and moment data were compared at Mach 2.0. The Euler code agreed with the experimental data over the linear portion of the Mach 0.55 data and over the entire angle-of-attack range at Mach 2.0.

Sirbaugh, J. R.↗

NASA NTRS1986

Effects of some geometric variations on missile aerodynamic characteristics at supersonic speeds

Spearman, M. L.↗

NASA NTRS1986

Numerical simulation of vortical flow over an elliptical-body missile at high angles of attack

Numerical solutions to the Reynolds-averaged Navier-Stokes equations are given for the flow about an elliptical body missile (3:1 ellipse) at a Mach number of 2.5 and a unit Reynolds number of 6.56 x 10 to the 6th/m. At high angles of attack, the flow is dominated by large-scale free vortices which occur in the lee-side flow field due to crossflow boundary-layer separation. Emphasis is focused on the accurate prediction of the lee-side vortical flow. Solutions are presented for both symmetric and asymmetric (body rolled 45 deg) configurations at 10 deg and 20 deg angle of attack. The computed results are compared with experimental surface pressure coefficients and vapor-screen photographs. Excellent agreement is obtained in all cases.

Newsome, R. N.↗

NASA NTRS1986

Advanced technology payoffs for future rotorcraft, commuter aircraft, cruise missile, and APU propulsion systems

In connection with the significant advances made regarding the performance of larger gas turbines, challenges arise concerning the improvement of small gas turbine engines in the 250 to 1000 horsepower range. In response to these challenges, the NASA/Army-sponsored Small Engine Component Technology (SECT) study was undertaken with the objective to identify the engine cycle, configuration, and component technology requirements for the substantial performance improvements desired in year-2000 small gas turbine engines. In the context of this objective, an American turbine engine company evaluated engines for four year-2000 applications, including a rotorcraft, a commuter aircraft, a supersonic cruise missile, and an auxiliary power unit (APU). Attention is given to reference missions, reference engines, reference aircraft, year-2000 technology projections, cycle studies, advanced engine selections, and a technology evaluation.

Turk, M. A.↗

NASA NTRS1986

Year 2000 small engine technology payoffs in cruise missiles

A study has been conducted for advanced small (450-850 pounds thrust) gas turbine engines for a subsonic strategic cruise missile application, using projected year-2000 technology. Engine performance and configuration analyses were performed for two and three spool turbofan and propfan engine concepts. Mission and Life Cycle Cost (LCC) analyses were performed in which the candidate engines were compared to the baseline engine over a prescribed mission. The advanced technology engines reduced system LCC up to 41 percent relative to the baseline engine. The critical aerodynamic materials and mechanical systems necessary for turbine engine technology were identified.

Singh, B.↗

NASA NTRS1985

Wind-tunnel investigation at supersonic speeds of a remote-controlled canard missile with a free-rolling-tail brake torque system

Wind tunnel tests were conducted at Mach numbers 1.70, 2.16, and 2.86 to determine the static aerodynamic characteristics of a cruciform canard-controlled missile with fixed or free rolling tailfin afterbodies. Mechanical coupling effects of the free-rolling-tail afterbody were investigated by using an electronic electromagnetic brake system providing arbitrary tail-fin brake torques with continuous measurements of tail-to-mainframe torque and tail roll rate. Remote-controlled canards were deflected to provide pitch, yaw, and roll control. Results indicate that the induced rolling moment coefficients due to canard yaw control are reduced and linearized for the free-rolling-tail (free-tail) configuration. The canards of the latter provide conventional roll control for the entire angle-of-attack test range. For the free-tail configuration, the induced rolling moment coefficient due to canard yaw control increased and the canard roll control decreased with increases in brake torque, which simulated bearing friction torque. It appears that a compromise in regard to bearing friction, for example, low-cost bearings with some friction, may allow satisfactory free-tail aerodynamic characteristics that include reductions in adverse rolling-moment coefficients and lower tail roll rates.

Blair, A. B., Jr.↗

NASA NTRS1987

Atmospheric Turbulence Relative to Aviation, Missile, and Space Programs

The purpose of the workshop was to bring together various disciplines of the aviation, missile, and space programs involved in predicting, measuring, modeling, and understanding the processes of atmospheric turbulence. Working committees re-examined the current state of knowledge, identified present and future needs, and documented and prioritized integrated and cooperative research programs.

Camp, Dennis W.↗

NASA NTRS1987

Tactical missile turbulence problems

Of particular interest is atmospheric turbulence in the atmospheric boundary layer, since this affects both the launch and terminal phase of flight, and the total flight for direct fire systems. Brief discussions are presented on rocket artillery boost wind problems, mean wind correction, turbulent boost wind correction, the Dynamically Aimed Free Flight Rocket (DAFFR) wind filter, the DAFFR test, and rocket wake turbulence problems. It is concluded that many of the turbulence problems of rockets and missiles are common to those of aircraft, such as structural loading and control system design. However, these problems have not been solved at this time.

Dickson, Richard E.↗

NASA NTRS1987

Mach 6 experimental and theoretical stability and performance of a cruciform missile at angles of attack up to 65 degrees

An experimental and theoretical investigation of the longitudinal and lateral-directional stability and control of an axisymmetric cruciform-finned missile has been conducted at Mach 6. The angle-of-attack range extended from 20 to 65 deg to encompass maximum lift. Longitudinal stability, performance, and trim could be accurately predicted with the fins at a fin roll angle of 0 deg but not when the fins were at a fin roll angle of 45 deg. At this roll angle, windward fin choking occurred at angles of attack above 50 deg and reduced the effectiveness of the fins and caused pitch-up.

Edward R Hartman↗