Search NASA⌕ Search

SEARCH · Search NASA

Results for “MODULATION TECHNIQUE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
NASA NTRS2019

NASA Near Earth Network (NEN) DVB-S2 Demonstration Testing for Enhancing Data Rates for CubeSat/SmallSat Missions

National Aeronautics and Space Administration (NASA) CubeSat/SmallSat missions are expected to grow rapidly in the next decade. As the number of spacecraft on a ground network grows, employing higher data rates could reduce loading by reducing the contact time per day required. CubeSats also need to communicate directly to earth from space from longer distances than low earth orbit (LEO). These challenges motivate the need for bandwidth and power efficient modulation and coding techniques. Today, Digital Video Broadcast, Satellite Second Generation (DVB-S2) is a communications standard for larger satellites. DVB-S2 uses power and bandwidth efficient modulation and coding techniques to deliver performance approaching Radio Frequency (RF) channel theoretical limits. NASA’s Near Earth Network (NEN) conducted a demonstration test at the Wallops Flight Facility in spring of 2019 for CubeSat/SmallSat missions for enhancing data rate performance in NASA’s S-band 5 MHz channel. The goal is to upgrade NEN with DVB-S2 to increase science data return and enable greater numbers of CubeSats. This paper presents the NEN DVB-S2 demonstration testing objectives and performance measurement results. Results of the demonstration testing are compared with evolving SmallSat/CubeSat radios. DVB-S2 S-band transmitter development concepts for SmallSats/CubeSats and use of DVB-S2 by future missions are discussed.

Wong, Yen↗
NASA NTRS1985

Tunable diode laser Stark modulation spectroscopy for rotational assignment of the HNO3 7.5-micron band

The technique of Stark modulation spectroscopy for unraveling and assigning rotationally resolved dense molecular spectra has been employed using a tunable diode laser (TDL) source. Doppler-limited absorption and Stark modulation spectra of the HNO3 7.5-micron band near the 1326/cm band origin are presented with preliminary values of the excited-state rovibrational constants derived from both TDL and Bomem Fourier transform IR spectra.

Webster, C. R.↗
NASA NTRS1972

Broadband CO2 laser coupling modulation.

The application of coupling modulation is described for achieving a 110-MHz bandwidth using CO2 lasers and GaAs electrooptic crystals. Coupling modulation is a technique that has no bandwidth limitations and allows the modulation bandwidth to exceed that of the laser resonator.

Mcavoy, N.↗
NASA NTRS1973

Advanced tracking and data relay experiment study: Multimode transponder experiment

A series of experiments utilizing a multimode transponder mounted in an aircraft working either through a spacecraft or directly with a ground station is studied. The purpose of the experiments is to determine the best modulation and encoding techniques for combating RFI and multipath propagation and to determine the characteristics of VHF and UHF RFI in discreet bands. The experiments would also determine the feasibility and accuracy of range and range rate measurements with the various modulation and encoding techniques.

Cnossen, R. S.↗
NASA NTRS1973

Advanced tracking and data relay experiments study: Multimode transponder experiment analysis procedure

Plans and implementation concepts were developed for utilizing a multimode transponder mounted in an aircraft working either through a spacecraft or directly with a ground station. The purpose would be to determine the best modulation and encoding techniques for combating RFI and multipath propagation and to determine the characteristics of VHF and UHF RFI in discreet bands. The experiments would also determine the feasibility and accuracy of range and range rate measurements with the various modulation and encoding techniques.

Cnossen, R. S.↗
NASA NTRS1971

A Preliminary Structural Analysis of Space-Base Living Quarters Modules to Verify a Weight-Estimating Technique

The determination of a base line (minimum weight) design for the primary structure of the living quarters modules in an earth-orbiting space base was investigated. Although the design is preliminary in nature, the supporting analysis is sufficiently thorough to provide a reasonably accurate weight estimate of the major components that are considered to comprise the structural weight of the space base.

Grissom, David S.↗
NASA NTRS1983

Hermetic edge sealing of photovoltaic modules

The edge sealing technique is accomplished by a combination of a chemical bond between glass and aluminum, formed by electrostatic bonding, and a metallurgical bond between aluminum and aluminum, formed by ultrasonic welding. Such a glass to metal seal promises to provide a low cost, long lifetime, highly effective hermetic seal which can protect module components from severe environments. Development of the sealing techniques and demonstration of their effectiveness by fabricating a small number of dummy modules, up to eight inches square in size, and testing them for hermeticity using helium leak testing methods are reviewed. Non-destructive test methods are investigated.

Source record↗
NASA NTRS1990

Multiplex gas chromatography

The principles of the multiplex gas chromatography (GC) technique, which is a possible candidate for chemical analysis of planetary atmospheres, are discussed. Particular attention is given to the chemical modulators developed by present investigators for multiplex GC, namely, the thermal-desorption, thermal-decomposition, and catalytic modulators, as well as to mechanical modulators. The basic technique of multiplex GC using chemical modulators and a mechanical modulator is demonstrated. It is shown that, with the chemical modulators, only one gas stream consisting of the carrier in combination with the components is being analyzed, resulting in a simplified instrument that requires relatively few consumables. The mechanical modulator demonstrated a direct application of multiplex GC for the analysis of gases in atmosphere of Titan at very low pressures.

Valentin, Jose R.↗
NASA NTRS1975

Integrated source and channel encoded digital communication system design study

Various aspects of space shuttle communication systems were studied. The following major areas were investigated: burst error correction for shuttle command channels; performance optimization and design considerations for Costas receivers with and without bandpass limiting; experimental techniques for measuring low level spectral components of microwave signals; and potential modulation and coding techniques for the Ku-band return link. Results are presented.

Huth, G. K.↗
NASA NTRS1974

Simulation verification techniques study. Task report 4: Simulation module performance parameters and performance standards

Shuttle simulation software modules in the environment, crew station, vehicle configuration and vehicle dynamics categories are discussed. For each software module covered, a description of the module functions and operational modes, its interfaces with other modules, its stored data, inputs, performance parameters and critical performance parameters is given. Reference data sources which provide standards of performance are identified for each module. Performance verification methods are also discussed briefly.

Source record↗
NASA NTRS2019

Modeling and Simulation Techniques for the NASA SLS Service Module Panel Separation Event; from Loosely-Coupled Euler to Fully-Coupled 6-DOF, Time-Accurate, Navier-Stokes Methodologies

An aerodynamic database has been generated for use by the Orion Multi-Purpose Crew Vehicle (MPCV) Program to analyze Service Module (SM) panel jettison from the NASA SLS vehicle. The database is a combination of CFD data for the panel aerodynamic coefficients, and MATLAB code written to query the CFD data. The Cart3D inviscid CFD flow solver was used to generate the panel aerodynamic coefficients for static panel orientations and free stream conditions that can occur during the jettison event. The MATLAB code performs the multivariate interpolation to obtain aerodynamic coefficients. The MATLAB code uses input for SM panel parameters and returns the SM panel aerodynamic force and moment coefficients for use with a Six-Degree-of-Freedom (6-DOF) motion solver to model the jettison event. This paper examines the accuracy of the sequential-static database approach by modeling the panel jettison event with a fully-coupled, time-dependent, viscous, moving-body CFD simulation. The fully-coupled simulation is obtained using the Loci/Chem unstructured Navier-Stokes CFD solver. The results show that the fully-coupled approach agrees well with the loosely-coupled database/6-DOF approach, indicating that unsteady effects are minimal for the panel jettison event. These results suggest that the database/6-DOF approach is sufficient. In addition, this paper presents the development of an uncertainty model for use in Monte Carlo analysis of the panel jettison event. Here viscous CFD simulations are obtained with Loci/Chem and compared to the inviscid CFD forces and moments. An uncertainty model based on model-form error and numerical error is presented.

Hall, Leslie H.↗
NASA NTRS1983

Parametric dependence of ocean wave-radar modulation transfer functions

Microwave techniques at X and L band were used to determine the dependence of ocean-wave radar modulation transfer functions (MTFs) on various environmental and radar parameters during the Marine Remote Sensing experiment of 1979 (MARSEN 79). These MIF are presented, as are coherence functions between the AM and FM parts of the backscattered microwave signal. It is shown that they both depend on several of these parameters. Besides confirming many of the properties of transfer functions reported by previous authors, indications are found that MTFs decrease with increasing angle between wave propagation and antenna-look directions but are essentially independent of small changes in air-sea temperature difference. However, coherence functions are much smaller when the antennas are pointed perpendicular to long waves. It is found that X band transfer functions measured with horizontally polarized microwave radiation have larger magnitudes than those obtained by using vertical polarization.

Plant, W. J.↗
NASA NTRS1974

Coding/modulation trade-offs for Shuttle wideband data links

This paper describes various modulation and coding schemes which are potentially applicable to the Shuttle wideband data relay communications link. This link will be capable of accommodating up to 50 Mbps of scientific data and will be subject to a power constraint which forces the use of channel coding. Although convolutionally encoded coherent binary PSK is the tentative signal design choice for the wideband data relay link, FM techniques are of interest because of the associated hardware simplicity and because an FM system is already planned to be available for transmission of television via relay satellite to the ground. Binary and M-ary FSK are considered as candidate modulation techniques, and both coherent and noncoherent ground station detection schemes are examined. The potential use of convolutional coding is considered in conjunction with each of the candidate modulation techniques.

Batson, B. H.↗
NASA NTRS2017

Micrometeoroid and Orbital Debris Risk Assessment With Bumper 3

The Bumper 3 computer code is the primary tool used by NASA for micrometeoroid and orbital debris (MMOD) risk analysis. Bumper 3 (and its predecessors) have been used to analyze a variety of manned and unmanned spacecraft. The code uses NASA's latest micrometeoroid (MEM-R2) and orbital debris (ORDEM 3.0) environment definition models and is updated frequently with ballistic limit equations that describe the hypervelocity impact performance of spacecraft materials. The Bumper 3 program uses these inputs along with a finite element representation of spacecraft geometry to provide a deterministic calculation of the expected number of failures. The Bumper 3 software is configuration controlled by the NASA/JSC Hypervelocity Impact Technology (HVIT) Group. This paper will demonstrate MMOD risk assessment techniques with Bumper 3 used by NASA's HVIT Group. The Permanent Multipurpose Module (PMM) was added to the International Space Station in 2011. A Bumper 3 MMOD risk assessment of this module will show techniques used to create the input model and assign the property IDs. The methodology used to optimize the MMOD shielding for minimum mass while still meeting structural penetration requirements will also be demonstrated.

Hyde, J.↗
NASA NTRS1986

Module encapsulation technology

The identification and development techniques for low-cost module encapsulation materials were reviewed. Test results were displayed for a variety of materials. The improved prospects for modeling encapsulation systems for life prediction were reported.

Willis, P.↗