SEARCH · Search NASA

Results for “Model Form”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

All sources NASA NTRS DOE OSTI

NASA NTRS1934

Complete tank tests of two flying-boat hulls with pointed steps - N.A.C.A. Models 22-A and 35

This note presents the results of complete tank test of N.A.C.A. Models 22-A and 35, two flying-boat hulls of the deep pointed-step type with low dead rise. Model 22-A is a form derived by modification of Model 22, the test results of which are given in N.A.C.A. Technical Note No. 488. Model 35 is a form of the same type but has a higher length-beam ratio than either Model 22 or 22-A. Take-off examples are worked out using data from these tests and a previous test of a conventional model applied to an arbitrary set of design specifications for a 15,000-pound flying boat. The comparison of these examples shows both pointed-step models to be superior to the conventional form, and Model 35 to be the better of the two. Model 35 is applied to a hypothetical 100,000-pound flying boat of the twin-hull type and performance calculations are made both for take-off and range. The results indicate that the high performance of this type of hull will enable the designer to use higher wing and power loadings than are found in current practice, with a resulting increase in range and pay load.

Shoemaker, James M↗

NASA NTRS1992

Design and analysis of filament-wound cylinders in compression

The objective of the study was to develop a more accurate model for the prediction of the compressive behavior of filament-wound composite cylindrical shells. Results from a closed-form analytical model and a three-dimensional finite element model show that the extensional and bending stiffness of the laminate is significantly reduced in tow cross-over regions and that bending-extension coupling is increased in comparison with classical lamination theory. The material properties predicted by a micromechanics analysis are included in a global finite element model of a filament-wound circular cylindrical shell which also incorporates variations in the laminate stacking thickness. Results from the global shell analysis are compared with experimental data.

Hipp, Patrick A.↗

NASA NTRS1974

Effectiveness evaluation of STOL transport operations (phase 2)

A computer simulation program which models a commercial short-haul aircraft operating in the civil air system was developed. The purpose of the program is to evaluate the effect of a given aircraft avionics capability on the ability of the aircraft to perform on-time carrier operations. The program outputs consist primarily of those quantities which can be used to determine direct operating costs. These include: (1) schedule reliability or delays, (2) repairs/replacements, (3) fuel consumption, and (4) cancellations. More comprehensive models of the terminal area environment were added and a simulation of an existing airline operation was conducted to obtain a form of model verification. The capability of the program to provide comparative results (sensitivity analysis) was then demonstrated by modifying the aircraft avionics capability for additional computer simulations.

Welp, D. W.↗

NASA NTRS1993

Validation of mesoscale models

The topics discussed include the following: verification of cloud prediction from the PSU/NCAR mesoscale model; results form MAPS/NGM verification comparisons and MAPS observation sensitivity tests to ACARS and profiler data; systematic errors and mesoscale verification for a mesoscale model; and the COMPARE Project and the CME.

Kuo, Bill↗

NASA NTRS1993

Nonlinear probabilistic finite element models of laminated composite shells

A probabilistic finite element analysis procedure for laminated composite shells has been developed. A total Lagrangian finite element formulation, employing a degenerated 3-D laminated composite shell with the full Green-Lagrange strains and first-order shear deformable kinematics, forms the modeling foundation. The first-order second-moment technique for probabilistic finite element analysis of random fields is employed and results are presented in the form of mean and variance of the structural response. The effects of material nonlinearity are included through the use of a rate-independent anisotropic plasticity formulation with the macroscopic point of view. Both ply-level and micromechanics-level random variables can be selected, the latter by means of the Aboudi micromechanics model. A number of sample problems are solved to verify the accuracy of the procedures developed and to quantify the variability of certain material type/structure combinations. Experimental data is compared in many cases, and the Monte Carlo simulation method is used to check the probabilistic results. In general, the procedure is quite effective in modeling the mean and variance response of the linear and nonlinear behavior of laminated composite shells.

Engelstad, S. P.↗

NASA NTRS1994

Limb-darkening models from along-track operation of the ERBE scanning radiometer

During January and August 1985, the scanning radiometers of the Earth Radiation Budget Experiment(ERBE) aboard the Earth Radiation Budget Satellite (ERBS) and the NOAA-9 satellite were operated in along-track scanning modes. Along-track scanning permits the study of many measurement problems. It provides the data for developing a limb-darkening model for a single site over a short period of time and also permits the indentification of the scene from data taken at smaller nadir angles. The earth-emitted radiation measured by the scanners has been analyzed to produce limb-darkening models for a variety of scene types. Limb-darkening models relate the radiance in any given direction to the radiant flux. The scene types were computed using measurements within 10 deg of zenith. The models have values near zenith of 1.02-1.09. The typical zenith values of the model are 1.06 for both day and night for ERBS, and for NOAA-9, 1.06 for day and 1.05 for night. Mean models are formed for the ERBS and NOAA-9 results and are found to differ less than 1%, the ERBS results being the higher. The models vary about 1% with latitude near zenith and agree with earlier models that were used to analyze ERBE data typically to 2%.

Smith, G. Louis↗

NASA NTRS2020

Shedding Light on Microbial Dark Matter with A Universal Language of Life

The majority of microbial genomes have yet to be cultured, and most proteins predicted from microbial genomes or sequenced from the environment cannot be functionally annotated. As a result, current computational approaches to describe microbial systems rely on incomplete reference databases that cannot adequately capture the full functional diversity of the microbial tree of life, limiting our ability to model high-level features of biological sequences. The scientific community needs a means to capture the functionally and evolutionarily relevant features underlying biology, independent of our incomplete reference databases. Such a model can form the basis for transfer learning tasks, enabling downstream applications in environmental microbiology, medicine, and bioengineering. Here we present LookingGlass, a deep learning model capturing a “universal language of life”. LookingGlass encodes contextually-aware, functionally and evolutionarily relevant representations of short DNA reads, distinguishing reads of disparate function, homology, and environmental origin. We demonstrate the ability of LookingGlass to be fine-tuned to perform a range of diverse tasks: to identify novel oxidoreductases, to predict enzyme optimal temperature, and to recognize the reading frames of DNA sequence fragments. LookingGlass is the first contextually-aware, general purpose pre-trained “biological language” representation model for short-read DNA sequences. LookingGlass enables functionally relevant representations of otherwise unknown and unannotated sequences, shedding light on the microbial dark matter that dominates life on Earth.

A Hoarfrost↗

NASA NTRS1989

On damping mechanisms in beams

A partial differential equation model of a cantilevered beam with a tip mass at its free end is used to study damping in a composite. Four separate damping mechanisms consisting of air damping, strain rate damping, spatial hysteresis and time hysteresis are considered experimentally. Dynamic tests were performed to produce time histories. The time history data is then used along with an approximate model to form a sequence of least squares problems. The solution of the least squares problem yields the estimated damping coefficients. The resulting experimentally determined analytical model is compared with the time histories via numerical simulation of the dynamic response. The procedure suggested here is compared with a standard modal damping ratio model commonly used in experimental modal analysis.

Banks, H. T.↗

NASA NTRS1991

On damping mechanisms in beams

Banks, H. T.↗

NASA NTRS2010

Error and Uncertainty Quantification in the Numerical Simulation of Complex Fluid Flows

The failure of numerical simulation to predict physical reality is often a direct consequence of the compounding effects of numerical error arising from finite-dimensional approximation and physical model uncertainty resulting from inexact knowledge and/or statistical representation. In this topical lecture, we briefly review systematic theories for quantifying numerical errors and restricted forms of model uncertainty occurring in simulations of fluid flow. A goal of this lecture is to elucidate both positive and negative aspects of applying these theories to practical fluid flow problems. Finite-element and finite-volume calculations of subsonic and hypersonic fluid flow are presented to contrast the differing roles of numerical error and model uncertainty. for these problems.

Barth, Timothy J.↗

NASA NTRS1978

Parametric modeling of low-frequency water-vapor-induced tropospheric path length fluctuations

Detailed wet tropospheric fluctuation information is presented in support of proposals to search for gravitational waves in ultra-precise Doppler data. The similarities between the solar wind and tropospheric effects on apparent signal path length are used to hypothesize a parametric model for low-frequency wet tropospheric path length fluctuation. Experimental observations of wet tropospheric signal delay fluctuations are interpreted as confirmation of this parametric form. The model is used to suggest the appropriate conditions for collection of experimental tropospheric fluctuation data.

Berman, A. L.↗

NASA NTRS1986

Unified constitutive materials model development and evaluation for high-temperature structural analysis applications

Unified constitutive material models were developed for structural analyses of aircraft gas turbine engine hot section components with particular application to an isotropic material used for combustor liners. Differential forms of models independently developed were considered in this study. These models combine the interactions of time-dependent (creep) and time-independent (plasticity) inelastic behavior of a material. Predicted stress-strain responses from these models were evaluated against cyclic isothermal and nonisothermal test results for uniaxial specimens of a nickel-base superalloy. The unified models were implemented in a nonlinear structural analysis code. Two unique NASA Lewis test facilities were used in the evaluation of the models for complex geometry specimens and evaluation of advanced temperature and high-temperature strain measurement instrumentation. Predicted nonlinear structural responses from one of the models for a flat plate and a segment of a conventional combustor liner are presented.

Thompson, R. L.↗

NASA NTRS1990

Limb-darkening functions as derived from along-track operation of the ERBE scanning radiometers for August 1985

During August 1985, the scanning radiometers of the Earth Radiation Budget Experiment aboard the Earth Radiation Budget Satellite (ERBS) and the NOAA-9 satellite were operated in along-track scanning modes. These data were analyzed to produce limb darkening functions for Earth-emitted radiation, which relates the radiance in any given direction to the radiant exitence. Limb darkening functions are presented and shown as figures for day and night for each spacecraft. The scene types were computed using measurements within 10 deg of zenith. The models have values near zenith of 1.02 to 1.09, with values near 1.06 being typical. The typical value of the model is 1.06 for both day and night for ERBS, and for NOAA-9, the typical value at zenith is 1.06 for day and 1.05 for night. Mean models are formed for the ERBS and for the NOAA-9 results and are found to differ less than 1 percent, the ERBS results being the higher. The models vary about 1 percent with latitude near zenith.

Smith, G. Louis↗

NASA NTRS2015

Utilizing Direct Numerical Simulations of Transition and Turbulence in Design Optimization

Design optimization methods that use the Reynolds-averaged Navier-Stokes equations with the associated turbulence and transition models, or other model-based forms of the governing equations, may result in aerodynamic designs with actual performance levels that are noticeably different from the expected values because of the complexity of modeling turbulence/transition accurately in certain flows. Flow phenomena such as wake-blade interaction and trailing edge vortex shedding in turbines and compressors (examples of such flows) may require a computational approach that is free of transition/turbulence models, such as direct numerical simulations (DNS), for the underlying physics to be computed accurately. Here we explore the possibility of utilizing DNS data in designing a turbine blade section. The ultimate objective is to substantially reduce differences between predicted performance metrics and those obtained in reality. The redesign of a typical low-pressure turbine blade section with the goal of reducing total pressure loss in the row is provided as an example. The basic ideas presented here are of course just as applicable elsewhere in aerodynamic shape optimization as long as the computational costs are not excessive.

Direct numerical simulations of transition and tur↗

NASA NTRS1974

Cinder cone growth modeled after Northeast crater, Mount Etna, Sicily

The structure, physical properties of ejecta, ballistics, and growth of Northeast crater, a young pyroclastic cone that originated in 1911 near the summit of Mount Etna, Sicily, were studied in order to form a model of volcano cinder cone growth. Four stages of growth were discerned: (1) a simple cone; (2) a cone with an outward-dipping talus slope; (3) destruction of rounded rim by the inward migration of the upper edge of the talus pile; and (4) extension of limits of talus pile beyond the ballistic limit of ejecta trajectories. The model is used to predict the features of lunar and Martian cones, assuming that they erupted under conditions qualitatively similar to Etna's Northeast crater.

Mcgetchin, T. R.↗

NASA NTRS1990

Extra compressibility terms for Favre-averaged two-equation models of inhomogeneous turbulent flows

Forms of extra-compressibility terms that result from use of Favre averaging of the turbulence transport equations for kinetic energy and dissipation are derived. These forms introduce three new modeling constants, a polytropic coefficient that defines the interrelationships of the pressure, density, and enthalpy fluctuations and two constants in the dissipation equation that account for the non-zero pressure-dilitation and mean pressure gradients.

Rubesin, Morris W.↗

DOE OSTI2025

Crystal structures of Salmonella enterica FraB deglycase reveal a conformational heterodimer with remarkable structural plasticity at the active site

Abstract Thefralocus ofSalmonella entericaencodes five genes for metabolism of fructose‐asparagine, an Amadori product formed by condensation of asparagine with glucose. In the last step of this pathway, the FraB deglycase cleaves 6‐phospho‐fructose‐aspartate into glucose‐6‐phosphate and aspartate. In homology models, FraB forms a homodimer with two equivalent active sites located at the dimer interface. E214 and H230, two invariant residues essential for catalysis, project into each active site cleft from opposing subunits of the dimer. Here, we have determined six crystal structures of FraB, three of a variant containing an N‐terminal His 6 tag and two mutations needed for crystallization (hereafter referred to as WT′), two with additional mutations to active site residues (E214A and P232A), and one of a variant with C‐terminal residues 313–325 deleted. Surprisingly, in the WT′ FraB structure, the two catalytic residues, E214 (general base) and H230 (general acid), are positioned ~22 Å apart. In the E214A and C‐terminus‐truncated FraB variants, however, a conformational change in the E214‐residing helix brings E214 and H230* to ~7 Å (* indicates residue from the second protomer that creates the inter‐subunit catalytic center). The loop bearing H230 also exhibits significant variation, ranging from being completely disordered to adopting open or closed states, with the nearby P232* residue being eithercisortrans. The C‐terminal residues 313–325 form a flexible “C‐tail” that can be fully disordered, bind in the active site to block access of substrate, or angle across the active site to wrap across the other subunit of the dimer and potentially close over substrate. Collectively, these structures reveal that FraB is a conformational heterodimer with two chemically identical subunits that are constrained to adopt different structures as they come together for catalysis. This plasticity likely involves correlated opening and closure of the two active sites for their respective binding and release of substrates and ligands.

Biochemistry & Molecular Biology↗

NASA NTRS1991

Life extending control: An interdisciplinary engineering thrust

The concept of Life Extending Control (LEC) is introduced. Possible extensions to the cyclic damage prediction approach are presented based on the identification of a model from elementary forms. Several candidate elementary forms are presented. These extensions will result in a continuous or differential form of the damage prediction model. Two possible approaches to the LEC based on the existing cyclic damage prediction method, the measured variables LEC and the estimated variables LEC, are defined. Here, damage estimates or measurements would be used directly in the LEC. A simple hydraulic actuator driven position control system example is used to illustrate the main ideas behind LEC. Results from a simple hydraulic actuator example demonstrate that overall system performance (dynamic plus life) can be maximized by accounting for component damage in the control design.

Lorenzo, Carl F.↗