Search NASA⌕ Search

SEARCH · Search NASA

Results for “Molecular Weight”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Editors’ Choice—Ionomer Side Chain Length and Equivalent Weight Impact on High Current Density Transport Resistances in PEMFC Cathodes

Cell voltage at high current densities (HCD) of an operating proton-exchange membrane fuel cell (PEMFC) suffers from losses due to the local-O 2 and bulk-H + transport resistances in the cathode catalyst layer (CCL). Particularly, the interaction of perfluorosulfonic acid (PFSA) ionomer with the carbon supported platinum catalyst plays a critical role in controlling reactant transport to the active site. In this study, we perform a systematic analysis of the side chain length and equivalent weight (EW) of PFSA ionomers on the CCL transport resistances. Ex situ measurements were carried out to quantify the ionomer characteristics such as the molecular weight, proton conductivity and water uptake. Nanomorphology of ionomers cast as 60–120 nm thin-films is characterized using grazing-incidence X-ray scattering. In situ fuel cell electrochemical diagnostic measurements were carried out to quantify the reactant (H + /O 2 ) transport properties of the CCL. Ionomer EW was found to play a major role with decreasing EW yielding higher proton conductivity and water uptake that led to lower bulk-H + and local-O 2 transport resistances in the CCL. Finally, a 1D-semi-empirical performance model has been developed to quantify the impact of ionomer EW on cell voltage loss factors.

08 HYDROGEN↗
DOE OSTI2024

Photolytic Degradation of Water‐Soluble Organic Carbon in Snowmelts: Changes in Molecular Characteristics, Brown Carbon Chromophores, and Radiative Effects

Abstract Water‐soluble organic carbon (WSOC) deposited in ambient snowpack play key roles in regional carbon cycle and surface energy budget, but the impacts of photo‐induced processes on its optical and chemical properties are poorly understood yet. In this study, melted samples of the seasonal snow collected from northern Xinjiang, northwestern China, were exposed to ultraviolet (UV) radiation to investigate the photolytic transformations of WSOC. Molecular characteristics and chemical composition of WSOC and its brown carbon (BrC) constituents were investigated using high‐performance liquid chromatography interfaced with a photodiode array detector and a high‐resolution mass spectrometer. Upon illumination, formation of nitrogen‐ and sulfur‐containing species with high molecular weight was observed in snow samples influenced by soil‐ and plant‐derived organics. In contrast, the representative sample collected from remote region showed the lowest molecular diversity and photolytic reactivity among all samples, in which no identified BrC chromophores decomposed upon illumination. Approximately 65% of chromophores in urban samples endured UV irradiation. However, most of BrC composed of phenolic/lignin‐derived compounds and flavonoids disappeared in the illuminated samples containing WSOC from soil‐ and plant‐related sources. Effects of the photochemical degradation of WSOC on the potential modulation of snow albedo were estimated. Apparent half‐lives of WSOC estimated as albedo reduction in 300–400 nm indicated 0.1–0.4 atmospheric equivalent days, which are shorter than typical photolysis half‐lives of ambient biomass smoke aerosol. This study provides new insights into the roles of WSOC in snow photochemistry and snow surface energy balance.

Meteorology & Atmospheric Sciences↗
DOE OSTI2021

Effect of Confinement on the Density and Diffusivity of Organic Molecules in Single-Digit Nanopores Relative to Bulk Fluid Behavior

Prediction of fluid properties in microporous and mesoporous confinement is non-trivial due to distinct influences from pore surface functionality and shape and fluid molecular characteristics. The vast majority of literature focuses nearly exclusively on a small number of components that are generally low molecular weight gases and vapors. Missing are studies that utilize a relatively large number of compounds that are liquid at ambient conditions to probe the impact of molecular shape and size on confined fluid properties. Such materials are of great interest in the extraction of oil and gas from shale reservoirs or for the design of selective adsorbents for chemical separation. In this work, we reveal non-intuitive relationships that emerge when comparing bulk fluid properties to those when confined in amorphous silica single-digit nanopores (approx. 5 nm SBA-15), specifically the confined density and self-diffusivity. A counterintuitive result was obtained where larger molecules had relatively faster self-diffusivities; however, this behavior was revealed to be caused by these larger compounds exhibiting a relatively low density when confined. As the prediction of confined fluid properties impacts a diversity of disciplines, the results highlight the need for additional investigations where consistent and large-scale experimental procedures are employed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Exploring Microphase Separation in Semi-Fluorinated Diblock Copolymers: A Combined Experimental and Modeling Investigation

We report the combined experimental and theoretical study of the bulk self-assembly behavior of polystyrene-blockpoly( 2,3,4,5,6-pentafluorostyrene) diblock copolymers. These block copolymers were designed to create highly antagonistic blocks (with a high Flory−Huggins interaction parameter, χ) with minimum disruption to the molecular construct (i.e., only replacing five hydrogen atoms with five fluorine atoms). A large library of diblock copolymers (41 samples) was synthesized by reversible addition− fragmentation chain transfer (RAFT) polymerization to map out a major portion of the phase space. All block copolymers exhibited narrow molecular weight distributions with dispersity (D) values between 1.07 and 1.32, and subsequent thermal annealing revealed phase separation into well-defined nanoscale morphologies depending on their molecular composition, as determined from small-angle X-ray scattering and transmission electron microscopy analyses, with an experimental phase diagram being constructed. The χ value at 25 °C for this block copolymer was estimated to be 0.2 using strong segregation theory, based on trends in phase-separated domain spacing and interfacial width. When applying theoretical approaches, the majority of the domain spacing data trends were captured by a coil−coil diblock copolymer model; however, a better fit to the data for samples with shorter fluorinated blocks was obtained with a rod−coil model, indicating that the chains in these fluorinated blocks likely have a higher inherent stiffness and were thus rod-like. This observation demonstrates that, due to the very high value of χ, a transition from coil−coil to rod−coil behavior can be obtained purely by reducing the length of the stiffer of the two blocks and without varying temperature or the chemical composition of the polymers. Here, this work showcases the presence of strong microphase separation within AB diblock copolymers despite the relatively similar chemical composition of the constituent “A” and “B” units, with a clear transition from rod−coil to coil−coil segregation behavior.

RAFT polymerization↗
DOE OSTI2024

Linking Dissolved Organic Matter Composition to Landscape Properties in Wetlands Across the United States of America

Abstract Wetlands are integral to the global carbon cycle, serving as both a source and a sink for organic carbon. Their potential for carbon storage will likely change in the coming decades in response to higher temperatures and variable precipitation patterns. We characterized the dissolved organic carbon (DOC) and dissolved organic matter (DOM) composition from 12 different wetland sites across the USA spanning gradients in climate, landcover, sampling depth, and hydroperiod for comparison to DOM in other inland waters. Using absorption spectroscopy, parallel factor analysis modeling, and ultra‐high resolution mass spectroscopy, we identified differences in DOM sourcing and processing by geographic site. Wetland DOM composition was driven primarily by differences in landcover where forested sites contained greater aromatic and oxygenated DOM content compared to grassland/herbaceous sites which were more aliphatic and enriched in N and S molecular formulae. Furthermore, surface and porewater DOM was also influenced by properties such as soil type, organic matter content, and precipitation. Surface water DOM was relatively enriched in oxygenated higher molecular weight formulae representing HUP High O/C compounds than porewaters, whose DOM composition suggests abiotic sulfurization from dissolved inorganic sulfide. Finally, we identified a group of persistent molecular formulae (3,489) present across all sites and sampling depths (i.e., the signature of wetland DOM) that are likely important for riverine‐to‐coastal DOM transport. As anthropogenic disturbances continue to impact temperate wetlands, this study highlights drivers of DOM composition fundamental for understanding how wetland organic carbon will change, and thus its role in biogeochemical cycling.

Environmental Sciences & Ecology↗
DOE OSTI2020

A Curated Experimental Compilation Analyzed by Theory Is More than a Review

Macromolecules is an exceptional resource in the field of polymer science and now publishes more than 1000 original articles a year that set the standard for scientific rigor and creative insights. Over the years, these individual contributions have combined to build the foundation of polymer science, broadly and inclusively defined. In addition to the individual articles, many of which are being celebrated in this series of editorials, Macromolecules has published invaluable reviews and perspectives. These scholarly contributions integrate the insights and results from numerous sources into a unified whole and often recommend future directions for the field. Novices and experts alike benefit from these works that capture topics from emerging discoveries to long-pondered topics and everything in between. To explore the importance of Macromolecules’ reviews and perspectives, we considered their influence on the field and found the 1994 review by Fetters et al. entitled “Connection between Polymer Molecular Weight, Density, Chain Dimensions, and Melt Viscoelastic Properties”1 to be a singularity. This review expertly curates and compiles a trove of data to build robust correlations between molecular characteristics and macroscopic viscoelastic properties of polymer melts, in the context of the tube model of entanglements.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Influence of hydrocracking and ionic liquid pretreatments on composition and properties of Arabidopsis thaliana wild type and CAD mutant lignins

Lignin is the primary contributor to the high cost of biofuel-production from lignocellulosic biomass. Here, in order to study lignin removal and the release of aromatic monomers, we applied hydrocracking and ionic liquid pretreatments on Arabidopsis thaliana biomass from both wild type (WT) and a mutant (CAD cxd) defective in two cinnamyl alcohol dehydrogenase genes involved in the lignin biosynthetic pathway. For Arabidopsis WT, our results highlight that pretreatments reduce average molecular weight of lignin by about 65% and decrease the content of β-O-4 linkages between lignin monomers. For Arabidopsis CAD mutant, an opposite effect is evidenced. Fewer differences were observed on depolymerization and molecular structure of lignin, which indicates that (8-O-4), (8-5), and (8-8) linkages observed in CAD mutant make lignin more resilient to pretreatment than wild-type lignin. Finally, our study shows the potential of hydrocracking pretreatment technology for extracting valuable aldehyde monomers such as vanillin and syringaldehyde from biomass.

09 BIOMASS FUELS↗
DOE OSTI2024

Effect of Aggregation and Molecular Size on the Ice Nucleation Efficiency of Proteins

Aerosol acts as ice-nucleating particles (INPs) by catalyzing the formation of ice crystals in clouds at temperatures above the homogeneous nucleation threshold (-38 °C). In this study, we show that the immersion mode ice nucleation efficiency of the environmentally relevant protein, ribulose-1,5-bisphosphate carboxylase/oxygenase (RuBisCO), occurs at temperatures between -6.8 and -31.6 °C. Further, we suggest that this range is controlled by the RuBisCO concentration and protein aggregation. The warmest median nucleation temperature (-7.9 ± 0.8 °C) was associated with the highest concentration of RuBisCO (2 × 10 –1 mg mL –1 ) and large aggregates with a hydrodynamic diameter of ~10 3 nm. We investigated four additional chemically and structurally diverse proteins, plus the tripeptide glutathione, and found that each of them was a less effective INP than RuBisCO. Ice nucleation efficiency of the proteins was independent of the size (molecular weight) for the five proteins investigated in this study. In contrast to previous work, increasing the concentration and degree of aggregation did not universally increase ice nucleation efficiency. RuBisCO was the exception to this generalization, although the underlying molecular mechanism determining why aggregated RuBisCO is such an effective INP remains elusive.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Multi-Scale Modeling Framework for Mercury Biogeochemistry

Multi-Scale modeling of mercury (Hg) geochemical speciation and reactions has been performed by integrating atomistic quantum chemical calculations with continuum scale speciation models. Major progress has been made in the improvement of quantum chemical models to calculate critical thermodynamic data for Hg complexes in aquatic environments. Rapid and reliable quantum chemical approaches have been developed for calculating acid dissociation constants (pK a ) and stability constants (log K), with calculated mean unsigned errors of 0.5 and 1.5 log units, respectively for ligand molecules and Hg complexes. At the continuum scale, systematic analysis of uncertainty propagation in mercury (Hg) speciation modeling has been conducted and was used to identify environmental conditions under which thermodynamic constant uncertainties are significant and recommended to be accounted for. The integrated framework for multi-scale modeling of mercury geochemistry is open to the research community through the web-based multiscale modeling aqueous speciation resource, AQUA-MER. The improved quantum chemical approaches for thermodynamic constant calculations are accessible through AQUA-MER and can be used to provide the missing constants in the continuum scale speciation calculations. In addition to low molecular mass Hg complex speciation, modeling natural aquatic environments also involve the transport of high molecular weight dissolved organic matter (DOM) in reactive flows simultaneously with equilibrium and kinetic reactions. To this end, atomistic MD simulations were performed to capture the details of aggregation, mechanisms and distribution of functional groups in DOM at the molecular level. The elemental composition and calculated bulk properties of the DOM models are in close agreement with experimental measurements. A travel-time based reactive transport model in the hyporheic zone of stream corridors was established for the multicomponent Hg-DOM-S system and implemented through PFLOTRAN.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Antihypertensive effect of quinoa protein under simulated gastrointestinal digestion and peptide characterization

Abstract BACKGROUND Quinoa protein is a potential source of bioactive peptides. Although some studies have demonstrated its angiotensin converting enzyme (ACE) inhibitory properties, research into its in vivo effect on blood‐pressure regulation and peptide characterization remains limited. RESULTS Quinoa protein hydrolyzate (QPH) was prepared by simulated gastrointestinal digestion. QPH lowered the systolic blood pressure (SBP) and diastolic blood pressure (DBP) in spontaneously hypertensive model rats (SHRs) from 2 h to10 h after oral administration, effectively controlling blood pressure in these SHRs. An in vitro study showed that QPH is capable of inhibiting ACE activity. This was attributed to the activity of a number of low‐molecular‐weight peptides. With relatively high scores predicted by PeptideRanker, three promising bioactive peptides, FHPFPR, NWFPLPR, and NIFRPF, were further studied and their ACE‐inhibition effects were confirmed with IC 50 values of 34.92, 16.77, and 32.40 μM, respectively. A molecular docking study provided insights into the binding of ACE with peptides, and revealed that the presence of specific amino acids in the peptide sequence (Pro, Phe, and Arg at the C‐terminal, and Asn at the N‐terminal) could contribute to the interaction between ACE and peptides. CONCLUSION These results demonstrated the potential of QPH for the management of hypertension, which indicates that it could be a good candidate for inclusion in functional foods to control high blood pressure. © 2020 Society of Chemical Industry

Guo, Huimin↗
DOE OSTI2023

Controlling the toxicity of biomass-derived difunctional molecules as potential pharmaceutical ingredients for specific activity toward microorganisms and mammalian cells

A biomass-derived difuran compound, denoted as HAH (HMF–acetone–HMF), synthesized by aldol-condensation of 5-hydroxyfurfural (HMF) and acetone, can be partially hydrogenated to provide an electron-rich difuran compound (PHAH) for Diels–Alder reactions with maleimide derivatives. The nitrogen (N) site in the maleimide can be substituted by imidation with amine-containing compounds to control the hydrophobicity of the maleimide moiety in adducts of furans and maleimide by Diels–Alder reaction, denoted as norcantharimides (Diels–Alder adducts). The structural effects on the toxicity of various biomass-derived small molecules synthesized in this manner to regulate biological processes, defined as low molecular weight (≤1000 g mol -1 ) organic compounds, were investigated against diverse microbial and mammalian cell types. The biological toxicity increased when hydrophobic N-substitutions and C[double bond, length as m-dash]C bonds were introduced into the molecular structure. Among the synthesized norcantharamide derivatives, some compounds demonstrated pH-dependent toxicities against specific cell types. Reaction kinetics analyses of the norcantharimides in biological conditions suggest that this pH-dependent toxicity of norcantharimides could arise from retro Diels–Alder reactions in the presence of a Brønsted acid that catalyzes the release of an N-substituted maleimide, which has higher toxicity against fungal cells than the toxicity of the Diels–Alder adduct. These synthetic approaches can be used to design biologically-active small molecules that exhibit selective toxicity against various cell types (e.g., fungal, cancer cells) and provide a sustainable platform for production of prodrugs that could actively or passively affect the viability of infectious cells.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2024

TATB thermal decomposition: Expanding the molecular profile with cryo-focused pyrolysis GC-MS

Understanding the molecular composition of high explosives during thermal decomposition is vital for predicting the sensitivity, safety, and performance of explosive materials. The thermal decomposition of 1,3,5-triamino-2,4,6-trinitrobenzene (TATB) has been linked to the formation of furazans through a series of dehydration reactions of the NO2 and NH2 groups on the phenyl ring, along with breakdown into small molecules (≤120 amu). Molecular identification of compounds formed in this transformation of the furazans to light gases has been lacking. To address this, we have applied a pseudo-confined sampling system in a cryo-focused pyrolysis gas chromatography-mass spectrometry (pyGC-MS) system to molecularly identify these intermediates. By design, sublimation of TATB, which has complicated MS analyses of thermal degradation, was significantly reduced and additional compounds were identified with potential structural information. In addition to the known furazan compounds, one of these compounds forms from the loss of oxygen from benzo-trifurazan (F3) and produces an open ring structure that may be the first step in the formation of lower molecular weight furazan breakdown products. The loss of a nitro group from benzo-monofurazan (F1) was also discovered and implicates the formation of oxidizing NO2 gas in the thermal decomposition mechanism. So these findings are vital for understanding the proper heat flow from energetic materials on a molecular level, necessary when measuring enthalpy and developing decomposition models based on kinetic parameters.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Metathesis, molecular redistribution of alkanes, and the chemical upgrading of low-density polyethylene

Here, a new strategy for polyethylene (PE) deconstruction via alkane metathesis is presented, in which WO x /SiO 2 catalyzes the olefin metathesis reaction step. Zeolite 4 A is an essential component to protect the metathesis active sites from poisoning by in-situ-generated oxygenates in a batch reaction system. High conversion of 1-hexadecene (96%) and n-hexadecane (92%)—surrogates of long-chain molecules—demonstrates the high reactivity of WO x /SiO 2 metathesis catalyst for olefin and alkane metathesis reactions, respectively, at moderate reaction temperatures of 300 °C for 2–3 h. Pretreatment temperature and length of the short n-alkane-chain solvent significantly affect the metathesis reactivity and selectivity. Results for the deconstruction of low-density PE (LDPE) in n-decane demonstrate a remarkable potential for PE upgrading with the advantages of short reaction times (3 h), the low mass ratio of solvent to LDPE, and the production of solid products with narrow molecular weight distributions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Feedstock design for quality biomaterials

Feedstock design is crucial for lignocellulosic biomass use. Current strategies for feedstock design cannot be readily applied to improve the quality of biomass-based materials, limiting the sustainability and economics of lignocellulosic biorefineries. Recent studies have advanced the understanding of biomass structure–property relationships and discovered several characteristics, such as molecular weight, uniformity, linkage profile, and functional groups, that are critical for manufacturing diverse quality biomaterials. Further, these discoveries call for fundamentally different strategies for feedstock development. Such strategies need to rediscover the roles of monolignol biosynthesis enzymes and leverage lignin polymerization enzymes to achieve precise control of lignin molecular structure. These innovations could transform biomass into feedstock for high-quality biomaterials, addressing essential environmental challenges and empowering the bioeconomy.

09 BIOMASS FUELS↗
DOE OSTI2021

Identification and quantification of lignin monomers and oligomers from reductive catalytic fractionation of pine wood with GC × GC – FID/MS

Thorough lignin characterization is vital to understand the physicochemical properties of lignin and to evaluate lignocellulose biorefinery processes. In this study, an in-depth characterization of lignin oil, obtained from reductive catalytic fractionation (RCF) of pine wood, was performed with quantitative GC × GC – FID analysis and qualitative GC × GC – MS. By utilizing high-temperature resistant column sets in the GC × GC system and by applying a derivatization step, unambiguous detection of lignin monomers, dimers, and trimers is enabled. In addition to confirm the identity of eleven monomers, corresponding to 34 wt% of the RCF lignin oil, thirty-six dimers (16 wt%) and twenty-one trimers (7 wt%) were comprehensively identified by analysis of their mass spectra and quantified by a FID, encompassing the identity of an additional 23 wt% of the RCF lignin oil. The proposed structures reveal the interlinkages present in the dimeric and trimeric oligomers, containing β-5, β-1, β–β, 5–5, and a minor fraction of β-O-4 and 4-O-5 bonds. Furthermore, aliphatic end-units in the dimeric and trimeric molecules were identified, consisting of various substituents at the C4 position, that have been previously observed in the RCF-derived lignin monomers. To reduce complexity for analysis, the RCF oil was separated into six fractions, prior to analysis. The structural motifs (inter-unit linkages and end-units) that are found in the different fractions vary significantly, such that the lignin fractions extracted in more polar solvents contained higher molecular weight fragments and more hydroxyl containing structural motifs. Additionally, the identified structures of individual dimer and trimer molecules by GC × GC align well with and further complement the recent findings from 1 H– 13 C HSQC NMR spectroscopy, demonstrating complementarity between both 2D techniques to obtain a holistic view on both the molecular structures and the distribution of bonds and end-units in RCF oil. The combination of these two techniques provides a powerful tool for future RCF and other lignin depolymerization research.

09 BIOMASS FUELS↗
DOE OSTI2024

Accelerated Sequence Design of Star Block Copolymers: An Unbiased Exploration Strategy via Fusion of Molecular Dynamics Simulations and Machine Learning

Star block copolymers (s-BCPs) have potential applications as novel surfactants or amphiphiles for emulsification, compatibilization, chemical transformations, and separations. s-BCPs have chain architectures where three or more linear diblock copolymer arms comprised of two chemically distinct linear polymers, e.g., solvophobic and solvophilic chains, are covalently joined at one point. The chemical composition of each of the subunit polymer chains comprising the arms, their molecular weights, and the number of arms can be varied to tailor the surface and interfacial activity of these architecturally unique molecules. Further, this makes identification of the optimal s-BCP design nontrivial as the total number of plausible s-BCP architectures is experimentally or computationally intractable. In this work, we use molecular dynamics (MD) simulations coupled with a reinforcement learning-based Monte Carlo tree search (MCTS) to identify s-BCP designs that minimize the interfacial tension between polar and nonpolar solvents. We first validate the MCTS approach for the design of small- and medium-sized s-BCPs and then use it to efficiently identify sequences of copolymer blocks for large-sized s-BCPs. The structural origins of interfacial tension in these systems are also identified by using the configurations obtained from MD simulations. Chemical insights into the arrangement of copolymer blocks that promote lower interfacial tension were mined using machine learning (ML) techniques. Overall, this work provides an efficient approach to solve design problems via fusion of simulations and ML and provides important groundwork for future experimental investigation of s-BCPs for various applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗