Search NASA⌕ Search

SEARCH · Search NASA

Results for “Morris method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

Acceleration levels on the heat flow and convection demonstration, Apollo 14

The method and data for determining the accelerations on the heat flow and convection demonstration are presented. From the analysis, it is concluded that accelerations as low as 0.02 micro g can be detected by using the attitude look angles to the earth and sun, the Apollo trajectory ephemeris, and the ephemeris of the sun.

Gatewood, E.↗

Basic research in wake vortex alleviation using a variable twist wing

The variable twist wing concept was used to investigate the relative effects of lift and turbulence distribution on the rolled up vortex wake. Several methods of reducing the vortex strength behind an aircraft were identified. These involve the redistribution of lift spanwise on the wing and drag distribution along the wing. Initial attempts to use the variable twist wing velocity data to validate the WAKE computer code have shown a strong correlation, although the vorticity levels were not exactly matched.

Morris, D. J.↗

Observations of the gaseous Galactic halo toward 3C 273 with the Goddard High Resolution Spectrograph

An analysis of observations of 24 absorption lines produced near zero redshift by Milky Way disk and halo gas along the sight line to 3C 273 is presented. The reduced spectra have a resolution of about 20 km/s (FWHM) with broad wings and an SNR of 13 to 20. The species detected include C II, C II*, C IV, O I, Mg II, Si II, Si IV, S II, Mn II, Fe II, and Ni II. The O I absorption is blended with earth atmospheric emission, and one of the Si IV doublet lines is blended with an intergalactic Lyman-alpha line. Column densities are determined for C II*, C IV, Si II, Si IV, N V, S II, Mn II, and Ni II using standard curve-of-growth techniques and the apparent optical depth method. The column density for S II and a measure of N(H I) from FOS observations of Lyman-alpha reveal a 45-percent overabundance of sulfur compared with neutral hydrogen which is probably due to the presence of S II in ionized gas toward 3C 273.

Savage, Blair D.↗

Numerical Study of Lander Engine Plume Impingement on the Surface of Europa

Plume exhaust from lander engines would be of concern when landing on the surface of Europa since it could have detrimental effects on both the landing surface and powered descent vehicle. The plume could also entrain particles and redirect them up toward the landing vehicle, as well as erode and contaminate the surface where science would be conducted. In this work, a numerical methodology is developed and validated to conduct a first-order assessment of individual engine plumes of a potential Europa Lander vehicle. Computational Fluid Dynamics (CFD) is used to solve the flow field inside and immediately downstream of the nozzle, while the Direct Simulation Monte Carlo (DSMC) method is applied further downstream where the flow becomes rarefied. An interface between the two domains is defined where macroscopic flow data is passed from the CFD domain to the DSMC domain, establishing a one-way coupling. Plume pressure and velocity fields, as well as ground heating, pressure and density flux profiles, are obtained at altitudes from 25 m down to 10 m, spanning the final stages of landing. The codes and methodologies used in this study are successfully validated with simulations conducted by Morris et al. of the Apollo Lunar Module Descent Engine (LMDE) exhaust plume impinging onto the lunar surface.

Lam, Rebekah↗

Numerical study of lander engine plume impingement on the surface off Europa

Plume exhaust from lander engines would be of concern when landing on the surface of Europa since it could have detrimental effects on both the landing surface and powered descent vehicle. The plume could also entrain particles and redirect them up toward the landing vehicle, as well as erode and contaminate the surface where science would be conducted. In this work, a numerical methodology is developed and validated to conduct a first-order assessment of individual engine plumes of a potential Europa Lander vehicle. Computational Fluid Dynamics (CFD) is used to solve the flow field inside and immediately downstream of the nozzle, while the Direct Simulation Monte Carlo (DSMC) method is applied further downstream where the flow becomes rarefied. An interface between the two domains is defined where macroscopic flow data is passed from the CFD domain to the DSMC domain, establishing a one-way coupling. Plume pressure and velocity fields, as well as ground heating, pressure and density flux profiles, are obtained at altitudes from 25 m down to 10 m, spanning the final stages of landing. The codes and methodologies used in this study are successfully validated with simulations conducted by Morris et al. [1-3] of the Apollo Lunar Module Descent Engine (LMDE) exhaust plume impinging onto the lunar surface.

Hoey, William↗

A Framework for Multisector Scenarios of Outcomes for Well-Being and Resilience

Shared community scenarios of societal and environmental system changes have underpinned a broad range of research and assessment studies over the past several decades. These scenarios have largely aimed to address specific questions within broad issue areas like climate change or biodiversity and generally provided information on the drivers of change. The consequences of those drivers, such as impacts on society and policy responses, have tended to be left to the research community to investigate, using scenarios of drivers as inputs to their studies, producing projections of a disparate set of relevant output metrics. While this approach has had many benefits, it has fallen short of producing a robust, comparable literature describing outcomes across studies in common metrics. We argue that new scenarios are needed that extend current approaches to be organized around common outcome metrics for the well-being and resilience of society and ecosystems. We propose an approach that would focus on agreed upon outcomes for well-being and resilience as well as critical drivers of change, cut across issues and scales in multiple sectors, and draw on new systematic methods of scenario generation and discovery to highlight scenarios that are most critical in understanding societal risks and responding to them. Research derived from this outcome-based scenario development approach would facilitate improved assessment of risks of and responses to a range of stressors and the multi-sector interactions they generate.

54 ENVIRONMENTAL SCIENCES↗

Navier-Stokes calculations and turbulence modeling in the trailing edge region of a circulation control airfoil

The accurate prediction of turbulent flows over curved surfaces in general and over the trailing edge region of circulation control airfoils in particular requires the coupled efforts of turbulence modelers, numerical analysts and experimentalists. The purpose of the research program in this area is described. Then, the influence on turbulence modeling of the flow characteristics over a typical circulation control wing is discussed. Next, the scope of this effort to study turbulence in the trailing edge region of a circulation control airfoil is presented. This is followed by a brief overview of the computation scheme, including the grid, governing equations, numerical method, boundary conditions and turbulence models applied to date. Then, examples of applications of two algebraic eddy viscosity models to the trailing edge region of a circulation control airfoil is presented. The results from the calculations is summarized, and conclusions drawn based on examples. Finally, the future directions of the program is outlined.

Viegas, John R.↗

Super-Zip separation joint performance investigation

Following functional failures of two of five Lockheed Super-Zip spacecraft separation joints in a development test series to quantify thermal effects, an investigation program was initiated on this and related systems to assist in preventing recurrence. The Super-Zip joint, applied in a ring configuration, utilizes an explosively expanded tube to fracture surrounding prenotched aluminum plates to achieve planar separation. A unique test method was developed and more than 300 individual test firings were conducted to provide an understanding of severance mechanisms, the functional performance effects of system variables, and the most likely cause of system failure. An approach for defining functional margin was developed, as well as specific recommendations for improving existing and future systems.

Bement, Laurence J.↗

Monitoring System for Storm Readiness and Recovery of Test Facilities: Integrated System Health Management (ISHM) Approach

Severe weather events are likely occurrences on the Mississippi Gulf Coast. It is important to rapidly diagnose and mitigate the effects of storms on Stennis Space Center's rocket engine test complex to avoid delays to critical test article programs, reduce costs, and maintain safety. An Integrated Systems Health Management (ISHM) approach and technologies are employed to integrate environmental (weather) monitoring, structural modeling, and the suite of available facility instrumentation to provide information for readiness before storms, rapid initial damage assessment to guide mitigation planning, and then support on-going assurance as repairs are effected and finally support recertification. The system is denominated Katrina Storm Monitoring System (KStorMS). Integrated Systems Health Management (ISHM) describes a comprehensive set of capabilities that provide insight into the behavior the health of a system. Knowing the status of a system allows decision makers to effectively plan and execute their mission. For example, early insight into component degradation and impending failures provides more time to develop work around strategies and more effectively plan for maintenance. Failures of system elements generally occur over time. Information extracted from sensor data, combined with system-wide knowledge bases and methods for information extraction and fusion, inference, and decision making, can be used to detect incipient failures. If failures do occur, it is critical to detect and isolate them, and suggest an appropriate course of action. ISHM enables determining the condition (health) of every element in a complex system-of-systems or SoS (detect anomalies, diagnose causes, predict future anomalies), and provide data, information, and knowledge (DIaK) to control systems for safe and effective operation. ISHM capability is achieved by using a wide range of technologies that enable anomaly detection, diagnostics, prognostics, and advise for control: (1) anomaly detection algorithms and strategies, (2) fusion of DIaK for anomaly detection (model-based, numerical, statistical, empirical, expert-based, qualitative, etc.), (3) diagnostics/prognostics strategies and methods, (4) user interface, (5) advanced control strategies, (6) integration architectures/frameworks, (7) embedding of intelligence. Many of these technologies are mature, and they are being used in the KStorMS. The paper will describe the design, implementation, and operation of the KStorMS; and discuss further evolution to support other needs such as condition-based maintenance (CBM).

Figueroa, Fernando↗

Firbimatic Vacuum Degreaser Cleaning Study

The purpose of this cleaning study was to establish the baseline of contaminants that can be removed using the Firbimatic Multisolvent 50-volt vacuum degreaser using Kyzen’s Metalnox® M6386 Solvent on 2219 aluminum alloy panels. Four different cleaning methods were used with six known contaminants. For each contaminant, five panels were contaminated—one was kept as a control, and the remaining four were cleaned using the vacuum degreaser. All applicable NASA, company, laboratory, and test-specific standard test practices were followed. Pre- and post-test results and photographs can be found in the appendices.

Morris, B. D.↗

UCNtau: Study of Lifetime Measurement in a Magneto-Gravitational Trap

The UCNtau project is intended to develop a new measurement of the neutron lifetime using ultra-cold neutrons (UCNs) stored in a magneto-gravitational trap. In this article, we will describe the development of the experiment so far, including the trap itself, the UCN transport and monitoring system, the neutron detection methods, and the Monte Carlo simulations that have been used to model these elements. Finally, we will describe the first systematic effects that we plan to study using this apparatus.

Saunders, Alexander↗

On alert for Ebola: public health risk assessment of travellers from Uganda to the USA during the 2022 outbreak

Abstract Background On 20 September 2022, the Ugandan Ministry of Health declared an outbreak of Ebola disease caused by Sudan ebolavirus. Methods From 6 October 2022 to 10 January 2023, Centers for Disease Control and Prevention (CDC) staff conducted public health assessments at five US ports of entry for travellers identified as having been in Uganda in the past 21 days. CDC also recommended that state, local and territorial health departments (‘health departments’) conduct post-arrival monitoring of these travellers. CDC provided traveller contact information, daily to 58 health departments, and collected health department data regarding monitoring outcomes. Results Among 11 583 travellers screened, 132 (1%) required additional assessment due to potential exposures or symptoms of concern. Fifty-three (91%) health departments reported receiving traveller data from CDC for 10 114 (87%) travellers, of whom 8499 (84%) were contacted for monitoring, 1547 (15%) could not be contacted and 68 (1%) had no reported outcomes. No travellers with high-risk exposures or Ebola disease were identified. Conclusion Entry risk assessment and post-arrival monitoring of travellers are resource-intensive activities that had low demonstrated yield during this and previous outbreaks. The efficiency of future responses could be improved by incorporating an assessment of risk of importation of disease, accounting for individual travellers’ potential for exposure, and expanded use of methods that reduce burden to federal agencies, health departments, and travellers.

General & Internal Medicine↗

Viking 1 Lander on the surface of Mars - Revised location

The method used to pinpoint the location of the Viking 1 Lander is described. The higher resolution of pictures taken by the Viking Orbiter at a lower periapsis altitude facilitated the correlation of topographical features with the same features in the Lander pictures. The new areographic coordinates of the Lander are 22.483 deg N latitude and 47.968 deg W longitude.

Morris, E. C.↗

Development of a NASA standard gas generator

The goals of the NASA Standard Gas Generator (NSGG) Program are to create a NASA standard gas generating cartridge, characterize its performance, and make it readily available to users. A cartridge within the same envelope as the NASA Standard Initiator (NSI) has the greatest potential use. This potential use is described in viewgraph form. Our approach for NSGG development and qualification was planned to be conducted in several phases. Test methods were developed to evaluate output performance for a variety of potential applications. A feasibility study using modified NSI's was accomplished. Preliminary and final development will be conducted with a delta qualification to evaluate the effects of manufacturing lots and environments. Feasibility study results, feasibility study conclusions, and future plans are presented.

Bement, Laurence J.↗

Synthesis, spinning, and properties of very high molecular weight poly(acrylonitrile- co -methyl acrylate) for high performance precursors for carbon fiber

In this paper, synthesis of very high molecular weight (VHMW) polyacrylonitrile- co -methyl acrylate(PAN-co-MA) polymers with weight average molecular weights of at least 1.7 million g/mole were repeatedly achieved on a laboratory scale using emulsion polymerization. Furthermore, the development of a hybrid dry-jet gel solution spinning technique for the VHMW PAN-co-MA enabled continuous spinning of 100 filament count tows, 100s of meters in length. Single filaments were analyzed and tested for tensile performance. Experimentally, the hybrid spinning method coupled with VHMW polymers produced precursor fibers with excellent tensile properties, averaging 954 MPa in strength and 15.9 GPa in elastic modulus ( N = 296), with small filament diameters (5 μm). Results indicate a strong correlation between decreasing filament diameter, facilitated by high molecular weight polymer, and exponentially increasing tensile properties, using a hybrid dry-jet gel spinning process.

36 MATERIALS SCIENCE↗

MultiSector Dynamics: Advancing the Science of Complex Adaptive Human-Earth Systems

The field of MultiSector Dynamics (MSD) explores the dynamics and co-evolutionary pathways of human and Earth systems with a focus on critical goods, services, and amenities delivered to people through interdependent sectors. This commentary lays out core definitions and concepts, identifies MSD science questions in the context of the current state of knowledge, and describes ongoing activities to expand capacities for open science, leverage revolutions in data and computing, and grow and diversify the MSD workforce. Central to our vision is the ambition of advancing the next generation of complex adaptive human-Earth systems science to better address interconnected risks, increase resilience, and improve sustainability. This will require convergent research and the integration of ideas and methods from multiple disciplines. Understanding the tradeoffs, synergies, and complexities that exist in coupled human-Earth systems is particularly important in the context of energy transitions and increased future shocks.

Reed, Patrick↗

Application of the Combined Judgmental and Randomly Placed Sampling Method

In the wake of the 2001 anthrax incidents in the United States, there has been considerable discussion about the role of judgmental and probabilistic sampling strategies, particularly in the context of clearance sampling. The Combined Judgmental and Random (CJR) methodology provides a statistical methodology that allows practitioners to leverage information from both judgmental and randomly selected sample locations and then quantify the confidence in negative results. The objective of the CJR sampling design is to demonstrate, with high probability, that a high percentage of the decision area (or population) is acceptable, given that none of the samples are unacceptable. The purpose of this document is to assist practitioners to appropriately use the CJR methodology and to implement this sampling design in Visual Sample Plan (VSP). We begin by defining some fundamental terms. A decision area is the geographical or spatial area (indoor or outdoor) about which practitioners wish to draw a conclusion on the basis of sampling and other relevant information. Decision areas typically include all or part of a building, but they may be any contaminated (or potentially contaminated) area for which characterization or clearance is required. In this report, a statistical sampling approach refers to any sampling approach based on a mathematical or statistical model that provides confidence or probability statements about the decision area. Statistical sampling approaches typically involve taking samples at random locations, or at the nodes of a randomly located grid or lattice that is superimposed on the decision area. The term probabilistic sampling is often used to describe statistical sampling designs that exclusively use randomly located samples. This terminology implies that probabilistic statements can only be made based upon the results of randomly placed samples. However, the CJR method utilizes a Bayesian model that gives rise to a formal probabilistic statement regarding the acceptability of the decision area based upon the information obtained from both judgmental and random samples. Judgmental samples play a vital role in the characterization and clearance process because they include the informed prior belief and expert knowledge of personnel involved in the sampling process.

97 MATHEMATICS AND COMPUTING↗

Improving Solar and Solar+Storage Screening Techniques to Reduce Utility Interconnection Time and Costs (Final Technical Report)

Residential PV installations have increased rapidly over the last decade, and the increased application volume has caused permitting delays and lower overall adoption rates. In this project, we developed and evaluated whether data-driven secondary modeling and screening techniques can help utilities assess customer applications more accurately than traditional screening shortcuts. Secondary topologies are predicted using decision trees and commonly available information, such as service transformer, customer, and street locations. Conductors were predicted using a logistic regression method based on real world object (RWO) types, service transformer ratings, conductor length, and distance to transformer. After developing the combined primary and secondary distribution network model, hosting capacity results were used to train a random forest model to predict the pass/fail likelihood of a customer application. Powerflow based models with predicted secondaries and data-driven methods both increased the screening success rate, relative to common utility heuristics, by as much as 55 percentage points. Data-driven screening techniques were described by one utility as a "right-sized" approach for residential customers given the low-risk of small errors and the high-cost of accurate modeling.

14 SOLAR ENERGY↗