Search NASA⌕ Search

SEARCH · Search NASA

Results for “Noise Modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

Photometry of CPD - 48 deg 1577

U, B, and V photometry is presented for CPD - 48 deg 1577, the newly discovered cataclysmic variable with the greatest known apparent brightness. The light curves are dominated by flickering but do suggest an orbital period of nearly 4 hr. Power spectra of 5 nights of U-band observations failed to reveal the presence of any periodic or quasi-periodic oscillations. Autocorrelation functions suggest that two time-scales exist in the flickering activity, one of 77 s and the other 500 s. The implications for a shot noise model of flickering are discussed.

Williams, G. A.↗

Observations of quasi-periodic oscillations from GX 5 - 1 and Cygnus X-2 with the Einstein (HEAO 2) Observatory

The bright galactic bulge X-ray source GX 5 - 1 was observed in April 1979 with the Monitor Proportional Counter on board the Einstein (HEAO 2) Observatory. Analysis of the high time resolution data from the Time Interval Processor confirms the recent Exosat discovery of quasi-periodic oscillations in the X-ray emission from GX 5 - 1. In addition, the summed 0.4 s power spectrum shows the low-frequency red noise component also discovered in the Exosat data. Low-frequency structure is also clearly present in data taken from the bright galaxtic X-ray source Cyg X-2 in December 1978. The expected power spectrum for quasi-periodic oscillations was calculated, including the low-frequency red noise component, using a simple shot noise model with oscillating shots.

Elsner, R. F.↗

Quasi-periodic oscillations as a probe of galactic-bulge X-ray sources

Quasi-periodic oscillations (QPOs) with frequencies in the range 5-50 Hz have recently been discovered in X-rays from two bright galactic-bulge sources and from Sco X-1. A shot-noise model that provides a mathematical framework for analyzing the constraints imposed on physical models by the observed power density spectra is described. A variety of physical models are then examined briefly. One of the most promising, the beat-frequency-modulated accretion model, is adopted as a working hypothesis to consider the clues it may provide concerning the galactic-bulge sources. Finally, some key observations are noted.

Lamb, F. K.↗

Coherence effects on quasi-periodic oscillations from Galactic X-ray sources

Shot noise models provide a useful mathematical representation for some physical models for the quasi-periodic oscillations recently observed from several Galactic bulge and burst X-ray sources. For such models, correlations between the shot onset times and oscillation phases can have important effects on the expected autocorrelation function and power spectrum, with important consequences for the interpretation of observed power spectra. Making use of analytic and Monte Carlo techniques, two physically plausible correlations of this kind, one corresponding to drift and jitter in the oscillation phase and the other to a random walk in the oscillation phase, are examined.

Elsner, R. F.↗

Consistent vertical and horizontal resolution

Simple physical relations (namely, the Rossby ratio between vertical and horizontal scales in quasi-geostrophic flow and the dispersion relation for internal gravity waves) are used to estimate the vertical resolution consistent with a given horizontal resolution. Using these relations it is found that virtually all large scale models and observing systems have inadequate vertical resolution. In models, the excess horizontal resolution can lead to increased model 'noise' rather than improved accuracy. In observing systems, the finer horizontal scales can be severely misrepresented.

Lindzen, Richard S.↗

Design of LQG controllers with reduced parameter sensitivity

A method is presented for improving the tolerance of LQG controllers to parameter errors. The improvement is achieved by introducing terms reflecting the structure of the errors into the LQR cost function and the process and measurement noise models. Adjusting the sizes of these additional terms permits a tradeoff between robustness and nominal performance.

Lin, J. Y.↗

Cosmic backgrounds from primeval dust

A general formalism is developed for describing the spectrum and the anisotropy of radiation from primeval dust as a nearly isotropic cosmic background with fluctuations. The theory incorporates spatial and temporal variations in the density of both luminosity and dust and is sufficiently robust to treat emission by point sources, as well as smoother emission, in high and low optical depth situations. The fluctuations are calculated using linear perturbation theory for arbitrary dust and luminosity clumping, and are calculated nonperturbatively for compact IR sources using shot-noise models. For many realistic models, a large accompanying NIR background is predicted. It is shown that, while spectal information alone provides only coarse information about the dust abundance and type, the redshift, and the other parameters, it may provide a powerful probe of pregalactic history when used in combination with the anisotropy signal.

Bond, J. R.↗

A receiver design for the superconducting cavity-maser oscillator

A new frequency standard was demonstrated with the aid of a double phase locked loop (PLL) receiver. A superconducting cavity maser oscillator (SCMO) and a hydrogen maser are combined to show the medium term performance of the hydrogen maser together with improved short term performance made possible by the SCMO. The receiver, which generates a 100 MHz signal with reduced noise, is phase locked to (and may be used in place of) the 100 MHz hydrogen maser output. The maser signal, 2.69xxx-GHz SCMO output, and a 100 MHz quartz crystal oscillator are optimally combined by the receiver. A measured two source fractional frequency stability of 2 x 10(exp -14) was obtained for a measuring time of r = 1 sec, and 1 x 10(exp -15) at r = 1,000 sec. The 1 sec value is approx. 10 times lower than that for hydrogen masers, while the 1,000 sec value is identical to hydrogen maser performance. The design is based on phase noise models for the hydrogen maser, the SCMO, and quartz crystal oscillators for offset frequencies down to 1 x 10(exp -6) Hz.

Wang, R. T.↗

InSb linear multiplexed FPAs for the CRAF/Cassini visible and infrared mapping spectrometer

This paper provides a review of a custom multiplexer circuit designed for use with a 256 element InSb linear array in the CRAF/Cassini VIMS instruments. The requirements, operation noise model and test results from a prototype 1 x 64 array are discussed. The infrared focal plane array (FPA) preliminary design and the impact of the new multiplexer on the instruments' predicted performance will be discussed. Emphasis will be placed on the multiplexer that was designed for the CRAF/Cassini missions. The FPA assembly combines electronic and optical components into a single hermetically sealed hybrid package. The detector configuration is that of a linear dual-multiplexed indium antimonide array with 256 elements, each 103 x 200 on 123-micron centers.

Niblack, Curtiss↗

Gravity and count probabilities in an expanding universe

The time evolution of nonlinear clustering on large scales in cold dark matter, hot dark matter, and white noise models of the universe is investigated using N-body simulations performed with a tree code. Count probabilities in cubic cells are determined as functions of the cell size and the clustering state (redshift), and comparisons are made with various theoretical models. We isolate the features that appear to be the result of gravitational instability, those that depend on the initial conditions, and those that are likely a consequence of numerical limitations. More specifically, we study the development of skewness, kurtosis, and the fifth moment in relation to variance, the dependence of the void probability on time as well as on sparseness of sampling, and the overall shape of the count probability distribution. Implications of our results for theoretical and observational studies are discussed.

Bouchet, Francois R.↗

Incorporation of spatial information in Bayesian image reconstruction - The maximum residual likelihood criterion

We have developed a new figure of merit, a 'maximum-residual-likelihood' (MRL) statistic, for the goodness of fit for Bayesian image restoration which explicitly incorporates spatial information. The MRL constraint provides a natural means of incorporating the prior knowledge that the residuals contain no spatial structure through the autocorrelation function of the residuals. We demonstrate that this statistic follows a Chi-square distribution and that forcing this statistic to have its most probable value leads to a restored image whose residuals are consistent with the noise model. Our numerical experiments suggest that image restoration using the MRL statistic alone is numerically robust and produces results which are independent of the initial guess for the restored image. However, we caution that using the MRL statistic without an image prior can result in overresolution in low SNR portions of the image.

Pina, R. K.↗

Recipes for degrees of freedom of frequency stability estimators

The Allan variance for an averaging time tau can be estimated either from all available phase samples or from a subgrid of samples with spacing tau. This paper gives a set of computational recipes that yield the variance of both estimators, with less than 2 percent error, for the five power-law components of the classical continuous-time clock noise model.

Greenhall, Charles A.↗

Effects of window size and shape on accuracy of subpixel centroid estimation of target images

A new algorithm is presented for increasing the accuracy of subpixel centroid estimation of (nearly) point target images in cases where the signal-to-noise ratio is low and the signal amplitude and shape vary from frame to frame. In the algorithm, the centroid is calculated over a data window that is matched in width to the image distribution. Fourier analysis is used to explain the dependency of the centroid estimate on the size of the data window, and simulation and experimental results are presented which demonstrate the effects of window size for two different noise models. The effects of window shape were also investigated for uniform and Gaussian-shaped windows. The new algorithm was developed to improve the dynamic range of a close-range photogrammetric tracking system that provides feedback for control of a large gap magnetic suspension system (LGMSS).

Welch, Sharon S.↗

TDRSS Onboard Navigation System (TONS) flight qualification experiment

The National Aeronautics and Space Administration (NASA) Goddard Space Flight Center (GSFC) is currently developing an operational Tracking and Data Relay Satellite (TDRS) System (TDRSS) Onboard Navigation System (TONS) to provide realtime, autonomous, high-accuracy navigation products to users of TDRSS. A TONS experiment was implemented on the Explorer Platform/Extreme Ultraviolet Explorer (EP/EUVE) spacecraft, launched June 7, 1992, to flight qualify the TONS operational system using TDRSS forward-link communications services. This paper provides a detailed evaluation of the flight hardware, an ultrastable oscillator (USO) and Doppler extractor (DE) card in one of the TDRSS user transponders and the ground-based prototype flight software performance, based on the 1 year of TONS experiment operation. The TONS experiment results are used to project the expected performance of the TONS 1 operational system. TONS 1 processes Doppler data derived from scheduled forward-link S-band services using a sequential estimation algorithm enhanced by a sophisticated process noise model to provide onboard orbit and frequency determination and time maintenance. TONS 1 will be the prime navigation system on the Earth Observing System (EOS)-AM1 spacecraft, currently scheduled for launch in 1998. Inflight evaluation of the USO and DE short-term and long-term stability indicates that the performance is excellent. Analysis of the TONS prototype flight software performance indicates that realtime onboard position accuracies of better than 25 meters root-mean-square are achievable with one tracking contact every one to two orbits for the EP/EUVE 525-kilometer altitude, 28.5 degree inclination orbit. The success of the TONS experiment demonstrates the flight readiness of TONS to support the EOS-AM1 mission.

Gramling, C. J.↗

Metafitting: Weight optimization for least-squares fitting of PTTI data

For precise time intercomparisons between a master frequency standard and a slave time scale, we have found it useful to quantitatively compare different fitting strategies by examining the standard uncertainty in time or average frequency. It is particularly useful when designing procedures which use intermittent intercomparisons, with some parameterized fit used to interpolate or extrapolate from the calibrating intercomparisons. We use the term 'metafitting' for the choices that are made before a fitting procedure is operationally adopted. We present methods for calculating the standard uncertainty for general, weighted least-squares fits and a method for optimizing these weights for a general noise model suitable for many PTTI applications. We present the results of the metafitting of procedures for the use of a regular schedule of (hypothetical) high-accuracy frequency calibration of a maser time scale. We have identified a cumulative series of improvements that give a significant reduction of the expected standard uncertainty, compared to the simplest procedure of resetting the maser synthesizer after each calibration. The metafitting improvements presented include the optimum choice of weights for the calibration runs, optimized over a period of a week or 10 days.

Douglas, Rob J.↗

Oblique incidence sound absorption of porous materials covered by perforated metal and exposed to tangential airflow

The purpose of this study was to evaluate several acoustic linings that are candidate designs for the Ames 40- by 80-Foot Wind Tunnel test section. The acoustic treatment will be used to reduce wall reflections from aircraft model noise sources. The goal is not simply to attenuate sound propagating down the duct, but rather to create a semi-anechoic space in a windy environment by absorbing at least 80% of the incident acoustic energy over a wide frequency range, if possible.

Soderman, Paul T.↗

Evaluation of phase-diversity techniques for solar-image restoration

Phase-diversity techniques provide a novel observational method for overcomming the effects of turbulence and instrument-induced aberrations in ground-based astronomy. Two implementations of phase-diversity techniques that differ with regard to noise model, estimator, optimization algorithm, method of regularization, and treatment of edge effects are described. Reconstructions of solar granulation derived by applying these two implementations to common data sets are shown to yield nearly identical images. For both implementations, reconstructions from phase-diverse speckle data (involving multiple realizations of turbulence) are shown to be superior to those derived from conventional phase-diversity data (involving a single realization). Phase-diverse speckle reconstructions are shown to achieve near diffraction-limited resolution and are validated by internal and external consistency tests, including a comparison with a reconstruction using a well-accepted speckle-imaging method.

Paxman, Richard G.↗