SEARCH · Search NASA
Results for “OSCAR”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Impact of the Advanced Water Vapor Radiometer on the Juno Gravity Science Investigation
UNKNOWN
Experimental Flight Validation of the Prandtl 1933 Bell Spanload
This report describes the validation of the 1933 Prandtl bell spanload. This spanload is the minimum induced drag of a wing for a given structural weight with properties that eliminate adverse yaw. Aircraft using the Prandtl bell spanload were flown and investigated. The results of this research show that many previously held assumptions should be rethought, and the creation of aircraft using the Prandtl bell spanload will require considerable new techniques. Part of this work centered on the use of inverse methods. The usual first-step approach to a computational fluids problem is to create a geometry of the aircraft. Once this geometry exists, the computational fluids solution has been solved; however, the problem of creating the geometry still exists. A very small segment of the computational fluids world has concentrated on inverse solutions. This design approach begins with an end result - the computational fluids solution; from this end result, the geometry is sought. A more generic inverse tool was desired that would allow for the design of wings - specifically Prandtl bell spanload wings. Such a tool has been developed and allows for variable taper, aspect ratio, sweep, airfoils, and design-lift coefficients; output from the tool results in twist distribution of wings.
Space Crop Production
A presentation to and discussion with a team of scientists and engineers associated with DLR. These are excerpts from previously presented public presentations from the three presenters to discuss these challenges with a group of researchers focused on ventilation and water in the atmosphere.
A Discussion of the Failure of a Quad Diode Module and NESC Efforts to Assure the Flight Spares
Explore the source record for details and available documents.
Climate Impacts on Global Agriculture Emerge Earlier in New Generation of Climate and Crop Models
Potential climate-related impacts on future crop yield are a major societal concern. Previous projections of the Agricultural Model Intercomparison and Improvement Project’s Global Gridded Crop Model Intercomparison based on the Coupled Model Intercomparison Project Phase 5 identified substantial climate impacts on all major crops, but associated uncertainties were substantial. Here we report new twenty-first-century projections using ensembles of latest-generation crop and climate models. Results suggest markedly more pessimistic yield responses for maize, soybean and rice compared to the original ensemble. Mean end-of-century maize productivity is shifted from +5% to −6% (SSP126) and from +1% to −24% (SSP585)—explained by warmer climate projections and improved crop model sensitivities. In contrast, wheat shows stronger gains (+9% shifted to +18%, SSP585), linked to higher CO 2 concentrations and expanded high-latitude gains. The ‘emergence’ of climate impacts consistently occurs earlier in the new projections—before 2040 for several main producing regions. While future yield estimates remain uncertain, these results suggest that major breadbasket regions will face distinct anthropogenic climatic risks sooner than previously anticipated.
(Arabidopsis Suberin Mutants) Evaluating Plant Suberin Mutants for Enhanced Water and Nutrient Uptake to Increase Biomass Production Under Elevated CO2 Concentrations
Explore the source record for details and available documents.
Analytical Methods and Testbeds for Characterizing Adsorbents and Catalysts for Atmosphere Revitalization of Crewed Spacecraft
Spacecraft environmental control and life support systems (ECLSS) include a number of air revitalization (AR) technologies to provide breathable air and a comfortable living environment to the crew. Crew health and comfort is ensured by controlling human produced CO2 (1 kg person-1 day-1) and water vapor (~2 kg person-1 day-1), and by removing trace contaminants (TCs) from cabin air. These life support functions on-board the International Space Station (ISS) are carried out by the Carbon Dioxide Removal Assembly (CDRA), the Water Processor Assembly (WPA), and the trace contaminant control system (TCCS). During the development of the TCCS, new analytical and theoretical methods were developed in the 1970s for characterizing adsorption and desorption characteristics of activated carbons for the purpose of designing suitable AR technologies required for controlling airborne trace contaminants within spacecraft cabins during long exploration missions. The TCCS removes harmful volatile organic compounds and other trace contaminants from the circulating air. It consists of a granular activated carbon (GAC) bed for the removal of high molecular weight contaminants and ammonia followed by a heated catalytic bed for low molecular weight hydrocarbons. The high temperature catalytic oxidizer (HTCO) of the TCCS, which operates at 400°C and requires 120W average power, removes low molecular weight compounds such as carbon monoxide (CO), formaldehyde (CH2O), and methane (CH4), that pass through the GAC bed. The Air Revitalization Laboratory at the Kennedy Space Center (KSC) was established to develop new analytical methods for evaluating emerging ECLSS technologies for use in future AR architectures. General properties of adsorbents and catalysts are required for trace contaminant control system design calculations and vendor-supplied data are seldom available at relevant process conditions of interest to spacecraft cabin applications. To address this shortcoming, appropriate testbeds were developed to measure the desired properties of AR technologies being considered for use in ECLS architectures. Generally, the testbeds developed at KSC challenge the test media (activated carbon, impregnated activated carbon, catalysts, zeolites, solid amines, or pleated filters) with simulated spacecraft gas streams containing representative mixtures of trace contaminants (volatile organic compounds, ammonia, CO, CO2, or siloxanes) at the flow rates, temperatures, and relative humidity that will be encountered within manned spacecraft. Work performed at KSC funded by NASA’s Advanced Exploration (AES) Program has included: Identifying candidate sorbents to replace commercially obsolete impregnated carbons for NH3 control within the TCCS, characterizing their adsorptive capacities using simulated spacecraft gas streams, and ranking their appropriateness in various AR applications; evaluating novel low temperature catalysts for controlling CO and formaldehyde by traditional and photocatalytic methods for trace contaminant control; development of analytical methods to assess regenerable solid amine performance for CO2 control via pressure swing adsorption. The Air Revitalization lab was also funded to study trace contaminant control by other NASA programs. These include: screening of candidate sorbents for the design of new Charcoal HEPA Integrated Particle Scrubber (CHIPS) filters for removing siloxanes from cabin air; characterizing the performance of an impregnated activated carbon at low humidity for use in ORION ECLS; screening of sorbents for protecting the Sabatier 2.0 catalyst from DMSO2, siloxanes, NH3, and solid amine byproducts.
Reply to Comment by Velasco on “High-Resolution, Multilayer Modeling of Singapore’s Urban Climate Incorporating Local Climate Zones”
In response to the comment on our paper “High-resolution, multilayer modeling of Singapore's urban climate incorporating local climate zones,” we provide detailed response to each of the incorrect accusations with scientifically based evidence. We have evaluated our model using all the available observational data, and the results showed good agreement. Our modeling study includes assumptions, as all modeling work does, and we have discussed their rationales and possible implications.
Calibration and Performance of Juno Radio Science Data
Juno Radio Science measures the frequency of X- and Ka-band radio links between the Juno spacecraft and the Earth-based observing stations of NASA’s Deep Space Network (DSN) in order to determine the gravitational field of Jupiter. The received frequency contains information on the gravitational field and is also perturbed by the propagation environment, including Earth troposphere and ionosphere, electrons in the solar plasma, electrons in the Io Plasma Torus around Jupiter, and instrumental effects on both the spacecraft and the ground electronics. Each of these effects must be calibrated out of the data to ensure an accurate estimation of the Jupiter gravitational field. This work discusses the data processing, calibration, and performance of the frequency measurements. The precision of the frequency measurements average 1.1 mHz (1σ standard deviation at 60 second integration time), or 5.3 microns/sec in units of velocity. The remaining noise sources are primarily from residual troposphere and charged particles. Further improvement could be made in future radio science experiments with the addition of a cross-link and stiffer ground antennas.
Capabilities and Performance of Juno’s Radio Science Instrumentation
The Juno Gravity Science Instrument is a radio science instrument onboard the Juno spacecraft, which entered orbit around Jupiter in 2016. The prime objective of the radio science investigation is to estimate the gravitational field of Jupiter from the Doppler shift on the radio link between the spacecraft and the Earth-based observing antennas of NASA’s Deep Space Network (DSN). The instrument is composed of a ground component at the DSN’s DSS-25 antenna, equipped with simultaneous dual X- and Ka-band transmitters and receivers, and a spacecraft component, which includes X- and Ka-band transponders to relay the transmitted signal back to Earth. The frequencies of these signals are measured using sensitive open-loop and closed-loop receivers of the DSN. Using the unique geometry of Juno’s orbit around Jupiter and the exquisite precision of the radio science instrumentation (~5-10 microns/sec one-way), the gravity field of Jupiter has been probed to unprecedented precision, allowing for discoveries of Jupiter’s core size and depth of the zonal winds. This precision is thanks to a detailed data processing and calibration techniques. An Advanced Water Vapor Radiometer measures the tropospheric delay and a linear combination X- and Ka-band links calibrates for Earth ionosphere, solar plasma, and Jovian plasma. Recent measurements probed the electron content inside Jupiter’s Io Plasma Torus, a doughnut-shaped ring of charged particles caught in Jupiter’s magnetosphere. Results from these measurements not only contributes to the scientific literature but also informs the performance of the instrument itself and can be used in future planning.
Calibration and Performance of Juno Radio Science Data
Juno Radio Science measures the frequency of X- and Ka-band radio links between the Juno spacecraft and the Earth-based observing stations of NASA’s Deep Space Network (DSN) in order to determine the gravitational field of Jupiter. The received frequency contains information on the gravitational field and is also perturbed by the propagation environment, including Earth troposphere and ionosphere, electrons in the solar plasma, electrons in the Io Plasma Torus around Jupiter, and instrumental effects on both the spacecraft and the ground electronics. Each of these effects must be calibrated out of the data to ensure an accurate estimation of the Jupiter gravitational field. This work discusses the data processing, calibration, and performance of the frequency measurements. The precision of the frequency measurements average 1.1 mHz (1σ standard deviation at 60 second integration time), or 5.3 microns/sec in units of velocity. The remaining noise sources are primarily from residual troposphere and charged particles. Further improvement could be made in future radio science experiments with the addition of a cross-link and stiffer ground antennas.
The Lunar GNSS Receiver Experiment (LuGRE)
Explore the source record for details and available documents.
Evaluating Microgreens Crop Readiness for Space Production
Microgreens are small-size, nutrient-rich, and fast-grown crops, which are considered as candidates for future space exploration missions. In particular, the ISS, the Lunar Gateway, and Mars and Lunar missions could benefit from growing microgreens to supplement astronaut diets in the near future. Research at NASA’s Kennedy Space Center has focused on (1) the selection of microgreens compatible species, (2) the evaluation of microgreens food safety, (3) the use of passive wicking, on-demand watering, and hydroponics cultivation, (4) simulated microgravity growth, (5) microgreen canopy gas exchange, and (6) harvesting techniques in microgravity. This interactive presentation summarizes this research. Microgreen species will be evaluated for their yield in relationship to the quantity of inputs – water, seeds, substrate, light intensity, photoperiod, crew time – required for their growth; for their organoleptic and sensory factors in order to down select species that are highly acceptable for humans; and for their microbial loads as detected in their growth environment and the food safety metrics of their edible tissue. Passive wicking, on-demand watering, and hydroponic systems are being studied as an efficient way to deliver essential nutrients and water to microgreens, included in a microgravity environment. Growth studies in simulated microgravity (using 3-dimensional clinostats) will assess microgreens growth relative to that in 1g. Gas exchange studies on microgreens canopies in various airflows will assess their photosynthesis and transpiration. Finally, a series of parabolic flights has enabled the evaluation of different harvesting and bagging techniques in microgravity. Indeed, traditional plant harvesting methods (scissors) in microgravity could generate significant microgreen debris in the space station cabin. Two innovative techniques, coupled to a dedicated bagging method, were designed and evaluated against the control, traditional, harvesting technique. This research was supported by grants from NASA KSC’s Independent Research and Technology Development Program, NASA’s Flight Opportunity Program, NASA Postdoctoral Program Fellowships (L.P. & C.J.) supported by NASA’s Space Biology program, and support from NASA’s Human Research Program.
Evaluating Plant Suberin Mutants for Enhanced Water and Nutrient Uptake to Increase Biomass Production Under Elevated CO2 Concentrations
Spaceflight cabin environments such as the International Space Station (ISS) typically have elevated CO2(1500-7000 μmol mol-1), which can affect plant growth and development. On earth, findings from FACE (Free-Air CO2Enrichment) and climate change studies have shown that plants grown at elevated (~ 700 μmol mol-1) CO2contain reduced levels of essential elements such as nitrogen, zinc, and iron. We hypothesized that spacecraft environments with elevated CO2 might likewise result in less nutritious crops for human consumption. Literature showed that quantitative differences in root suberin content could determine the permeability of the internal plant tissues to both water and solutes. To evaluate if there was a correlation between growth under elevated CO2and root suberin content we grew Arabidopsis thaliana, wild type (WT)(col-0), esb1(Enhanced Suberin 1) and horst1(Hydroxylase of Root Suberized Tissue)under ambient (~ 420± 25μmol mol-1) and elevated (800 ± 25, 1600 ± 25, 4000 ± 25 μmol mol-1) CO2concentrations. Comparing the growth of esb1and horst1plants to WT under ambient and elevated CO2concentrations, esb1showed significantly (P-value < 0.05) lower total fresh biomass whereas the horst1exhibited no significant difference. RNA sequencing revealed genes related to water uptake or nutrient availability stress upregulated due to the exposure to 800 and 1600 μmol mol-1CO2.Comparing the elemental composition of leaf tissue between WT and horst1plants grown under elevated CO2,we found an overall decrease in elemental composition for WT, whereas horst1showed an average increase of 30-60 % in the elemental contentsat1600 μmol mol-1compared to plants grown at ambient CO2. In conclusion, our results showed that horst1like modification to edible crops could improve the nutritional (elemental) content to supplement astronaut’s diet.
Capabilities and Performance of Juno’s Radio Science Instrumentation
No abstract provided
A Discussion of the Failure of a Quad Diode Module and Efforts to Assure the Flight Spares
In 2019 the International Space Station (ISS) experienced an on on-orbit failure that affected 1 of 28 Battery Charge Discharge Units (BCDUs). Telemetry pointed to a short circuit failure of a Power Rectifier Quad Diode Module. Astronauts removed the failed unit from service which was then returned to Earth for failure analysis. The failure analysis confirmed that the quad diode module had failed short circuit. The investigation identified silver dendrites had grown on the insulated, sloped edge of the mesa semiconductor die of the failed diode and also a 2nd diode in the same quad diode module. Voids between the diode’s protective encapsulating ring and the die provided space within which dendrites were able to form and cause catastrophic failure. The NASA Engineering & Safety Center (NESC) convened a EEE Parts Sub-Team to investigate root cause and to assist with risk assessment for all of the flight diode modules (4 distinct production lots) and the flight spares (from a 5th lot). Analysis of the original diode manufacturer’s read and record screening test data identified some lots which contained diodes with parametric instabilities that could signal conditions suited for silver dendrite formation. Computed Tomography (CT) X-ray screening inspection was performed on flight spare modules to identify diodes that do not exhibit voids between the edge of die and encapsulating ring as a mitigation against dendrite formation.