Search NASA⌕ Search

SEARCH · Search NASA

Results for “Orbit Determination”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

Evaluation of LANDSAT-D Orbit Determination Using a Filter/Smoother (PREFER)

Simulated range and range rate data for five tracking stations were first generated using batch least squares orbit determination (GTDS). Then GTDS was used (in the differential correction mode) to produce a nominal trajectory which was input to PREFER. The GTDS differential correction (DC) run was made using models which differed from those used to produce the simulated data. These model differences were chosen to be fairly realistic approximations to the errors in the models actually used for operational orbit determination. Several different simulation runs were made with different types of model errors in order to determine the sensitivity to these errors. The nominal trajectory and the simulated measurement data were input to PREFER to produce a smoothed ephemeris file. Numerous runs of PREFER were made in which parameters describing the statistics of the model errors were varied. The likelihood function computed by the Kalman filter determined the ""best'' choice of input parameters. There was strong negative correlation between the likelihood function and the errors in the smoothed ephemeris.

Gibbs, B. P.↗

GPS-Based Precision Orbit Determination for a New Era of Altimeter Satellites: Jason-1 and ICESat

Accurate positioning of the satellite center of mass is necessary in meeting an altimeter mission's science goals. The fundamental science observation is an altimetric derived topographic height. Errors in positioning the satellite's center of mass directly impact this fundamental observation. Therefore, orbit error is a critical Component in the error budget of altimeter satellites. With the launch of the Jason-1 radar altimeter (Dec. 2001) and the ICESat laser altimeter (Jan. 2003) a new era of satellite altimetry has begun. Both missions pose several challenges for precision orbit determination (POD). The Jason-1 radial orbit accuracy goal is 1 cm, while ICESat (600 km) at a much lower altitude than Jason-1 (1300 km), has a radial orbit accuracy requirement of less than 5 cm. Fortunately, Jason-1 and ICESat POD can rely on near continuous tracking data from the dual frequency codeless BlackJack GPS receiver and Satellite Laser Ranging. Analysis of current GPS-based solution performance indicates the l-cm radial orbit accuracy goal is being met for Jason-1, while radial orbit accuracy for ICESat is well below the 54x1 mission requirement. A brief overview of the GPS precision orbit determination methodology and results for both Jason-1 and ICESat are presented.

Scott B Luthcke↗

On-board orbit determination for application satellites

A proposal for onboard orbit determination which would rely entirely on reference Doppler beacons located within the Continental United States is presented. Algorithms were conceived which were compatible with small computing machines and sufficiently accurate to maintain an adequate satellite ephemeris. An on board computer equipped with a recursive filter with a fading memory to account for dynamic modeling errors and two reference beacons was found to be necessary for the system to work.

Morduch, G. E.↗

On-board orbit determination for applications satellites

An algorithm for satellite orbit determination is described which would be suitable for use with an on-board computer with limited core storage. The proposed filter is recursive on a pass-by-pass basis and features a fading memory to account for the effect of gravity field error. Only a single pass of Doppler data needs to be stored at any time and the data may be acquired from two reference beacons located within the Continental United States. The results of both simulated data and real data reductions demonstrate that the satellite's position can be determined to within one kilometer when a 4 x 4 recovery field is used.

Morduch, G. E.↗

The JPL orbit determination software system

The Jet Propulsion Laboratory (JPL) orbit determination software system is described. Consisting of a set of computer programs, this system has been developed at JPL for the primary purpose of determining the flight path of deep-space mission spacecraft in NASA's planetary program. Secondary uses include science studies in celestial mechanics and extraterrestrial atmospherics. Attention is given to such features as the capability for processing 30 data types from up to 15 tracking stations, and for precise navigation to natural satellites of outer planets. In addition, the system contains models for such conditions as mascons, atmospheric drag, attitude control, and finite motor burns, to provide for extensive solve-on capabilities.

Ekelund, J. E.↗

Giotto interplanetary orbit determination

Development, testing, and application of the Giotto orbit determination software are described. The final targetting for a close flyby of comet Halley is described.

Morley, Trevor A.↗

Planetary approach orbit determination using earth-based short and long baseline radio interferometry

This paper describes an investigation and comparison of the approach-phase orbit determination performance of delta-Very Long Baseline Interferometry (delta VLBI) and Connected Element Interferometry (CEI) data types when used in conjunction with conventional two-way Doppler data. Simulated data sets containing Doppler plus delta VLBI data and Doppler plus CEI data are used to calculate approximate orbit determination accuracy statistics for representative approach trajectories drawn from future robotic missions to Mars and Jupiter. The results illustrate the theoretical performance of CEI data acquired from short (20 km) baselines relative to that obtained with delta VLBI using the intercontinental baselines currently available within the NASA/JPL Deep Space Network.

Thurman, Sam W.↗

Atmospheric drag model for Cassini orbit determination during low altitude Titan flybys

On April 16, 2005, the Cassini spacecraft performed its lowest altitude flyby of Titan to date, the Titan-5 flyby, flying 1027 km above the surface of Titan. This document discusses the development of a Titan atmospheric drag model for the purpose of the orbit determination of Cassini. Results will be presented for the Titan A flyby, the Titan-5 flyby as well as the most recent low altitude Titan flyby, Titan-7. Different solutions will be compared against OD performance in terms of the flyby B-plane parameters, spacecraft thrusting activity and drag estimates. These low altitude Titan flybys were an excellent opportunity to observe the effect of Titan's atmospheric drag on the orbit determination solution and results show that the drag was successfully modeled to provide accurate flyby solutions.

orbit determination↗

Orbit Determination Support for the Microwave Anisotropy Probe (MAP)

The Microwave Anisotropy Probe (MAP) is a Medium Class Explorers (MIDEX) mission produced in partnership between Goddard Space Flight Center (GSFC) and Princeton University. The main science objective of the MAP mission is to produce an accurate full-sky map of the cosmic microwave background temperature fluctuations anisotropy. MAP was launched from the Cape Canaveral Air Force Station Complex 17 aboard a Delta II 7425-10 expendable launch vehicle at exactly 19:46:46.183 UTC on June 30, 2001. The spacecraft received a nominal direct insertion by the Delta into a 185 km circular orbit. MAP was then maneuvered into a sequence of phasing loops designed to set up a lunar swingby (gravity-assisted acceleration) of the spacecraft onto a transfer trajectory to a Lissajous orbit about the Earth-Sun L2 point. The mission duration is approximately 27 months with 3 to 4 months of transfer time to the final mission orbit about L2. The MAP transfer orbit consisted of 3.5 phasing loops: the first loop has a 7-day period, the second and third loops have a 9-day period, and the last half loop has a 4-day period as illustrated in Figure 1, which also indicates the placement of maneuvers. A Pfinal correction maneuver was performed 18 hours after the last perigee to more closely achieve the targeted lissajous orbit. The lunar encounter or swingby took place approximately 30 days after launch. After the lunar encounter, the spacecraft will cruise for approximately 120 days before it arrives at L2. A Mid-Course Correction (MCC) maneuver was executed seven days after the swingby to further refine the trajectory. Once the MAP satellite is injected into the L2 Lissajous orbit, it will perform occasional stationkeeping maneuvers to maintain the Lissajous orbit for a minimum of two years (and a goal of four years). Because of its complex orbital characteristics, the mission provided a unique challenge to orbit determination (OD) support in many orbital regimes. Extensive trajectory error covariance analysis was performed to predict ephemeris accuracy for the OD process using a Bayesian least-squares technique. The orbit determination error analysis is essential for maneuver planning and maneuver recovery study. Several tracking scenarios were investigated for each phase of the mission. This paper provides a summary of the premission trajectory covariance error analysis, as well as actual real-time OD results. The use and impact of the various tracking stations, systems, and measurements will be discussed. Details of the operational OD support and the inferred OD accuracy will be presented, and the results will be compared to the premission covariance analysis, In addition, there will be a discussion of the challenges presented to OD support including delta-Vs at apogee as well as perigee, and effects due to spacecraft attitude mode, in light of their implications to the OD accuracy and covariance analysis.

Truong, Son H.↗

A homotopy continuation method for general preliminary orbit determination and special application to the Tracking and Data Relay Satellite System

A recent mathematical technique for solving systems of equations is applied in a very general way to the orbit determination problem. The use of this technique, the homotopy continuation method, was motivated by the possible need to perform preliminary orbit determination in the Tracking and Data Relay Satellite System (TDRSS), using range and Doppler tracking alone. In the formulation studied here, a set of six tracking observations is continuously transformed from a set with known solutions to the given set with unknown solutions, and the corresponding orbit state vector is followed from the a priori orbit state to the solution orbit states. A modular numerical algorithm is developed to follow the state vector. The technique is formulated and then tested, using both real and simulated tracking, with positive results. Direct comparisons show that the basic method has a much larger radius of convergence than standard or simply modified Newton-Raphson methods. An extension of the basic method is formulated that is expected to produce a global method.

Smith, R. L.↗

Orbit determination accuracies using satellite-to-satellite tracking

Results of the ATS-6/GEOS-3 and the ATS-6/NIMBUS-6 satellite-to-satellite tracking orbit determination experiments to be applied to the NASA geostationary Tracking and Data Relay Satellite System (TDRSS) starting in 1980, are presented. A satellite radio or laser tracking system performed measurements of such parameters as range, range ratio, angles and direction cosines to a spacecraft relative to a given tracking station. Resolutions of 1 meter in range and .03 cm/sec in range rate for a 1 second averaging were achieved showing that with proper data reduction procedures the tracking data relay satellite system should provide orbit determination capability comparable to what is normally obtainable from ground based systems.

Vonbun, F. O.↗

Entry capsule orbit determination accuracy

On-board tracking system of two-way coherent Doppler between entry capsule and orbiting bus for determining orbit of entry capsule and estimating atmospheric parameters.

COHERENT RADAR↗

Mars Exploration Rover Cruise Orbit Determination

The Mars Exploration Rover project consisted of two missions (MER-A: spirit rover and MER-B: opportunity rover) that launched spacecraft on June 10, 2003, and July 8, 2003, respectively. The spacecraft arrived at Mars approximately seven months later on January 4, 2004, and January 24, 2004. These spacecraft needed to be precisely navigated to a Mars atmospheric entry flight path angle of -11.5 deg +/-0.12 deg (3(sigma)) for MER-A and +/-0.14 deg (3(sigma)) for MER-B in order to satisfy the landing site delivery requirements. The orbit determination task of the navigation team needed to accurately determine the trajectory of the spacecraft, predict the trajectory to Mars atmospheric entry, and account for all possible errors sources so that the each spacecraft could be correctly targeted using five trajectory corrections along the way. This paper describes the orbit determination analysis which allowed MER-A to be targeted using only four trajectory correction maneuvers to an entry flight path angle of -11.49 deg +/-O.010 deg (3(sigma)) and MER-B to be targeted using only three trajectory correction maneuvers to an entry flight path angle of -11.47 +/-0.021 deg(3(sigma)).

navigation↗