SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Safety requirements and guidelines are listed for the sortie module, upper stage vehicle, and space station for the earth orbit operations of the space shuttle program. The requirements and guidelines are for vehicle design, safety devices, warning devices, operational procedures, and residual hazards.
Current NASA planning envisions an ambitious Jupiter tour mission which will arrive at the planet in the year, 1984. The objectives of this mission are to broaden our knowledge of the outer solar system and in particular to extend our understanding of the physical processes at work in the Jupiter and Galilean satellite environment. To achieve these goals, precise spacecraft navigation is a fundamental requirement inasmuch as very near encounters with the satellites are necessary both for the planned scientific investigations and to reduce fuel requirements necessary for orbital insertion about the planet. This paper, deals with problems of producing precise spacecraft state estimates relative to the Galilean satellites, with the aid of both earth-based radio and on-board video data.
The results of the analysis conducted on the telemetry data from the prelaunch, launch, and flight activation phases of LANDSAT-2 spacecraft are presented according to subsystems and interrelationships that exist between subsystems. Subsystem characteristics are included along with the flight evaluation results. Flight data are compared to baseline data established at the 20 C plateau during thermal vacuum testing of the spacecraft. Evaluation guidelines are derived from the specifications developed from the LANDSAT program objectives: (1) acquisition of multispectral images of the surface of the earth; and (2) use of the LANDSAT-2 receiving, frequency translating, and transmitting equipment as a relay system to gather data from fixed earth-based sensor platforms which are operated by individual investigators. Data are presented on the first 50 orbits of the spacecraft.
Longitudinal and lateral-directional characteristics were obtained on several modified versions of the Rockwell International 140 A/B orbiter (0.010 scale). These modifications, designed to extend trim capability to center-of-gravity locations forward of the 65 percent fuselage station, consisted of two forebodies, two canard trimmers, and two body-wing fillets. Tests were performed over an angle-of-attack range of 12 to 36 degrees at a Reynolds number of 1.03 million based on body reference length. Data were obtained with the elevons and body flap deflected at the full-up and full-down design values. This investigation was conducted in the NASA Langley continuous flow hypersonic tunnel.
The author has identified the following significant results. Outside the U.S., various attempts were made to investigate the feasibility of utilizing orbital MSS imagery in the production of small scale land use maps. Overall, these studies are not as elaborate or extensive in their scope as the U.S. ones, and generally the non-U.S. investigators have employed nonsophisticated and less expensive techniques. A representative range of studies is presented to demonstrate the approaches and trends dealing with reprocessing, interpretation, classification, sampling, and ground truth procedures.
Tests were conducted in the LaRC 8-foot transonic pressure tunnel to determine effects of fuselage nose and wing fillet modifications on the transonic aerodynamic characteristics of a space shuttle orbiter configuration. In addition to reshaping the baseline wing planform fillet, small canards were added to the configuration. The modifications considered were of interest in extending the forward center-of-gravity boundary for the configuration.
A qualitative physical description of the orbital resonance mechanism based on a previously published (Greenberg et al. 1972; Greenberg, 1973) mathematical analysis is presented. The fundamental principles of the resonance mechanism are illustrated by an examination of the Titan-Hyperion case. More complex resonances, including Enceladus-Dione, Mimas-Tethys are considered. Resonance phenomena involving the rings of Saturn, the inner three satellites of Uranus, and the inner three Galilean satellites of Jupiter are also discussed. The role of analyses of resonance phenomena in developing theories of satellite formation and evolution is examined.
Force tests were conducted at Mach 20.3 to determine the effect of several forebody, wing-fillet, and canard modifications on the hypersonic trim capability of a 139B Space Shuttle Orbiter model. Force and moment data were obtained at angles of attack of 10 deg to 54 deg at zero sideslip angle and at a Reynolds number of 1,900,000 based on body length. The results indicated that wing-fillet and canard modifications would increase the allowable forward trimmed center-of-gravity capability by as much as 3.0 percent of the body length.
The orbiter radiator external coating is highly specular silverized Teflon. Solar energy specularly reflected from these radiators on a typical payload which, when deployed, extends above the payload bay envelope was studied. The flux levels are compared assuming both diffuse and specular radiators.
Pressure drop tests were conducted on available samples of low and high density tile, densified low density tile, and strain isolation pads. The results are presented in terms of pressure drop, material thickness and volume flow rate. Although the test apparatus was only capable of a small part of the range of conditions to be encountered in a Shuttle Orbiter flight, the data serve to determine the type of flow characteristics to be expected for each material type tested; the measured quantities also should serve as input for initial venting and flow through analysis.
Potentially serious environmental effects exist when cargo orbital transfer vehicle (COTV) ion propulsion is used on the scale proposed in the preliminary definition studies of the Satellite Power System. These effects of the large scale injections of ion propulsion exhaust in the plasmasphere and in the outer magnetosphere were shown to be highly model dependent with major differences existing in the predicted effects of two models, the ion cloud model and the ion sheath model. The expected total number density deposition of the propellant Ar(+) in the plasmasphere, the energy spectra of the deposited Ar(+) and time dependent behavior of the Ar(+) injected into the plasmasphere by a fleet of COTV vehicles differ drastically between the two models. The ion sheath model was demonstrated to be applicable to the proposed Ar(+) beam physics if the beam was divergent and turbulent whereas the ion cloud model was not a realistic approximation for such a beam because the "frozen-field" assumption on which it is based is not valid.
The feasibility and efficiency of using an existing Earth orbiter to perform planetary missions was evaluated.
The feasibility of using the AE/DE Earth orbiting spacecraft design for the LGO and/or MGO missions was determined. Configurations were developed and subsystems analysis was carried out to optimize the suitability of the spacecraft to the missions. The primary conclusion is that the basic AE/DE spacecraft can readily be applied to the LGO mission with relatively minor, low risk modifications. The MGO mission poses a somewhat more complex problem, primarily due to the overall maneuvering hydrazine budget and power requirements of the sensors and their desired duty cycle. These considerations dictate a modification (scaling up) of the structure to support mission requirements.
Henrad's (1982) method, which is based on an extension of the theory of adiabatic invariants, is presently applied to a simplified analytic derivation of the capture probabilities for the j + 1 : j and j + 2 : j orbital resonances. The results originally obtained by Yoder (1979) are thereby recovered.
Wind-tunnel tests were conducted at Mach 1.5 to 2.5 to determine the effect of modifications designed to extend the forward center-of-gravity trim capability on the static longitudal and lateral directional characteristics of a Space shuttle 140 A/B orbiter model (0.01 scale). The modifications consisted of a forward-extended wing fillet, a flat plate canard, and a blended canard. The investigation was conducted in the low Mach number test section of the Langley unitary plan wind tunnel at a Reynolds number of approximately 2.15 million based on the fuselage reference length. The test angle of attack range was -1 deg to 32 deg and the sideslip angles were 0 deg and 5 deg.
It was concluded that for electron beam emission up to 100mA, vehicle charging is not a significant problem with the Space Shuttle Orbiter. Similarly, sounding rocket payloads have no serious charging problems up to this level of beam current, provided that the maximum amount of the rocket skin is available to collect ionospheric electrons from the LEO altitude range. However, sounding rockets are marginal in their collecting area capability and other effects may occur to balance the beam current when operated at lower altitudes during the night.
Results are presented from an analysis of 331 craters in the 0.09-250 micron size range found in the solid aluminum thermal control louvers of the Solar Maximum Mission spacecraft, distinguishing between natural meteoroid impacts and those of orbital spacecraft debris. The time-averaged flux and size distribution of both particle types over the 10 to the -13th to 10 to the -7th g mass range are directly determined.
Data from two 1985 GPS field tests were processed and precise GPS orbits were determined. With a combined carrier phase and pseudorange, the 1314-km repeatability improves substantially to 5 parts in 10 to the 9th (0.6 cm) in the north and 2 parts in 10 to the 8th (2-3 cm) in the other components. To achieve these levels of repeatability and accuracy, it is necessary to fine-tune the GPS solar radiation coefficients and ground station zenith tropospheric delays.