SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
We developed a novel HTS engineering platform to optimize photoenzymatic activity. The improvements in variants were correlated to an increase in enzymatic photon efficiency. Here, transient absorption spectroscopy revealed a shift from a stepwise to a concerted mechanism. The platform was expanded to improve the synthesis of γ, δ, ϵ-lactams, and acyclic amides.
Abstract C−H amination and amidation by catalytic nitrene transfer are well‐established and typically proceed via electrophilic attack of nitrenoid intermediates. In contrast, the insertion of (formal) terminal nitride ligands into C−H bonds is much less developed and catalytic nitrogen atom transfer remains unknown. We here report the synthesis of a formal terminal nitride complex of palladium. Photocrystallographic, magnetic, and computational characterization support the assignment as an authentic metallonitrene (Pd−N) with a diradical nitrogen ligand that is singly bonded to Pd II . Despite the subvalent nitrene character, selective C−H insertion with aldehydes follows nucleophilic selectivity. Transamidation of the benzamide product is enabled by reaction with N 3 SiMe 3 . Based on these results, a photocatalytic protocol for aldehyde C−H trimethylsilylamidation was developed that exhibits inverted, nucleophilic selectivity as compared to typical nitrene transfer catalysis. This first example of catalytic C−H nitrogen atom transfer offers facile access to primary amides after deprotection.
Abstract Metal‐halide perovskites have been explored as photocatalysts for CO 2 reduction. We report that perovskite photocatalytic CO 2 reduction in organic solvents is likely problematic. Instead, the detected products (i.e., CO) likely result from a photoredox organic transformation involving the solvent. Our observations have been validated using isotopic labeling experiments, band energy analysis, and new control experiments. We designed a typical perovskite photocatalytic setup in organic solvents that led to CO production of up to ≈1000 μmol g −1 h −1 . CO 2 reduction in organic solvents must be studied with extra care because photoredox organic transformations can produce orders of magnitude higher rate of CO or CH 4 than is typical for CO 2 reduction routes. Though CO 2 reduction is not likely to occur, in situ CO generation is extremely fast. Hence a suitable system can be established for challenging organic reactions that use CO as a feedstock but exploit the solvent as a CO surrogate.
We present a supramolecular approach to catalyzing photochemical CO 2 reduction through second-sphere porosity and charge effects. An iron porphyrin box (PB) bearing 24 cationic groups, FePB-2(P), was made via post-synthetic modification of an alkyne-functionalized supramolecular synthon. FePB-2(P) promotes the photochemical CO 2 reduction reaction (CO 2 RR) with 97 % selectivity for CO product, achieving turnover numbers (TON) exceeding 7000 and initial turnover frequencies (TOF max ) reaching 1400 min -1 . The cooperativity between porosity and charge results in a 41-fold increase in activity relative to the parent Fe tetraphenylporphyrin (FeTPP) catalyst, which is far greater than analogs that augment catalysis through porosity (FePB-3(N), 4-fold increase) or charge (Fe p-tetramethylanilinium porphyrin (Fe-p-TMA), 6-fold increase) alone. In conclusion, this work establishes that synergistic pendants in the secondary coordination sphere can be leveraged as a design element to augment catalysis at primary active sites within confined spaces.
Abstract We demonstrate that several visible‐light‐mediated carbon−heteroatom cross‐coupling reactions can be carried out using a photoactive Ni II precatalyst that forms in situ from a nickel salt and a bipyridine ligand decorated with two carbazole groups (Ni(Czbpy)Cl 2 ). The activation of this precatalyst towards cross‐coupling reactions follows a hitherto undisclosed mechanism that is different from previously reported light‐responsive nickel complexes that undergo metal‐to‐ligand charge transfer. Theoretical and spectroscopic investigations revealed that irradiation of Ni(Czbpy)Cl 2 with visible light causes an initial intraligand charge transfer event that triggers productive catalysis. Ligand polymerization affords a porous, recyclable organic polymer for heterogeneous nickel catalysis of cross‐coupling reactions. The heterogeneous catalyst shows stable performance in a packed‐bed flow reactor during a week of continuous operation.
A photocatalyst TiO 2 /Ti-BPDC-Pt is developed with a self-grown TiO 2 /Ti-metal–organic framework (MOF) heterojunction, i.e., TiO 2 /Ti-BPDC, and selectively anchored high-density Pt single-atomic cocatalysts on Ti-BPDC for photocatalytic hydrogen evolution. This intimate heterojunction, growing from the surface pyrolytic reconstruction of Ti-BPDC, works in a direct Z-scheme, efficiently separating electrons and holes. Pt is selectively anchored on Ti-BPDC by ligands and is found in the form of single atoms with loading up to 1.8 wt %. The selective location of Pt is the electron-enriched domain of the heterojunction, which further enhances the utilization of the separated electrons. This tailored TiO 2 /Ti-BPDC-Pt shows a significantly enhanced activity of 12.4 mmol g -1 h -1 compared to other TiO 2 - or MOF-based catalysts. In conclusion, the structure-activity relationship further proves the balance of two simultaneously exposed domains of heterojunctions is critical to fulfilling this kind of catalyst.
Particle-based photocatalysts for overall water splitting convert solar energy into hydrogen fuel without the use of any photovoltaic devices. As such they have the potential to revolutionize renewable energy production on Earth. While proven efficiencies have reached 1.1%, further improvements of photocatalyst technology depend on a better understanding of energy loss mechanisms on the individual particle level. Here, we conduct the first in operando photoelectrochemical measurements on individual micrometer-sized Al-doped SrTiO 3 /Rh 2–y CryO 3 photocatalyst particles. We find that the photocatalyst particles behave mainly as water oxidation photoanodes reaching up to 0.5 mA cm −2 at 0.8 V versus RHE and a photovoltage of ∼1.00 V under 4.7 mW cm −2 ultraviolet illumination. This proves that charge separation in the unbiased Al:SrTiO 3 /Rh 2–y Cr y O 3 catalyst is driven by a junction at the n-semiconductor-liquid contact. While O 2 is detected symmetrically around photocatalyst particles, uneven H 2 evolution profiles reflect an irregular Rh 2–y Cr y O 3 cocatalyst distribution. Additionally, the H 2 evolution activity varies significantly between different photocatalyst particles. Furthermore, this suggests that performance gains are possible by better controlling catalyst composition on the microscale.
The quest for efficient solar-driven water splitting, a promising avenue for clean fuel production, faces challenges due to limited solar energy conversion efficiency. Traditional approaches study the overall water splitting as two spatially separate half reactions on two unrelated sites, hindering full utilization of photogenerated charge and water molecules. To overcome these limitations, an integrated cluster heterostructure catalyst on InGaN/GaN semiconductor nanowires is proposed for the effective utilization of photogenerated charge carriers and water molecules on the same redox localization. By establishing the fast charge extraction kinetics based on InGaN/GaN nanowires, the integration of Rh and MoRhOx clusters on the nanowire surface enables simultaneous and fast hydrogen/oxygen evolution reactions at the cluster heterostructure. Furthermore, the integrated strategy can enhance the charge redistribution across the heterostructure between the two clusters, further optimizing adsorption of reaction intermediates on each cluster for boosted photocatalytic water splitting activity. Consequently, the integrated heterostructure triggers a 40-fold increased hydrogen production efficiency in an artificial leaf system. This study provides valuable insights for the rational design of advanced heterostructured photocatalysts for water splitting and beyond.
De novo metalloprotein design involves the construction of proteins guided by specific repeat patterns of polar and apolar residues, which, upon self-assembly, provide a suitable environment to bind metals and produce artificial metalloenzymes. While a wide range of functionalities have been realized in de novo designed metalloproteins, the functional repertoire of such constructs towards alternative energy-relevant catalysis is currently limited. Here we show the application of de novo approach to design a functional H 2 evolving protein. The design involved the assembly of an amphiphilic peptide featuring cysteines at tandem a/d sites of each helix. Intriguingly, upon Ni II addition, the oligomers shift from a major trimeric assembly to a mix of dimers and trimers. The metalloprotein produced H 2 photocatalytically with a bell-shape pH dependence, having a maximum activity at pH 5.5. Transient absorption spectroscopy is used to determine the timescales of electron transfer as a function of pH. Selective outer sphere mutations are made to probe how the local environment tunes activity. Finally, a preferential enhancement of activity is observed via steric modulation above the Ni II site, towards the N-termini, compared to below the Ni II site towards the C-termini.
Photocatalytic syngas production is an attractive option to efficiently generate a feedstock for the Fischer-Tropsch processes that can produce liquid fuels and other chemicals. Here, one-pot photocatalytic production of syngas (H 2 +CO) with specific and controllable ratios of H 2 /CO has proven to be a significant challenge to date. In this work, single Co 2+ sites loaded onto carbon nitride (Co@C 3 N 4 ) is combined with black phosphorus (BP) to form a hybrid material, which is capable of simultaneous photocatalytic evolution of H 2 and CO. H 2 /CO syngas ratios can be controlled in the range from 0.30 to 5.16 by changing the % weight of BP in this system or by the addition of CoCl 2 in the reaction solution. Maximum total gas evolution of 70 μmol g –1 h –1 was achieved with 20 wt % BP (BP 20% /Co@C 3 N 4 ) at a H 2 /CO ratio of 2.
Abstract Recalcitrant waste plastics such a polyethylene, polypropylene, and polystyrene are difficult to recycle and are mostly disposed of in landfills and eventually leached into the environmental as micro‐ and nano‐plastics. This review explores how photo‐, electro‐, and combined photoelectro‐catalytic processes can assist in the degradation and upcycling of waste plastic into different chemicals and mitigate their release to the environment. In this work, we discuss how the different reaction mechanisms proceed, explore the current relevant literature, and highlight the developments needed to advance the field.
Technetium-99 is a prevalent fission product from nuclear waste. The long half-life (211,000 yr) and environmental mobility of pertechnetate (TcO 4 - ) render Tc particularly challenging to isolate and stabilize. Here, in this study, we present two approaches for development of potential wasteforms using titanium dioxide, TiO 2 . Approach 1 is a low temperature chemical synthesis of TiO 2 doped with Tc(IV) from TcO 4 - intended to mimic the Tc waste stream from the UREX family of separations and removes 98.5 % of the Tc, mainly present as edge-shared Tc(IV) pairs. Approach 2 utilizes TiO 2 to photocatalytically reduce TcO 4 - to Tc(IV) stabilized on the surface of or within the TiO 2 lattice. The %Tc removed from solution and adsorbed to TiO 2 is pH dependent, with the maximum Tc(IV) adsorbed at pH 3–4 as either TcO 2 or edge-sharing Tc(IV) octahedra. The Tc(IV)-TiO 2 composites materials formed by both approaches are suitable for consolidation into a dense wasteform by Hot Isostatic Pressing (HIPing).
Both heterojunction and core–shell photocatalysts have demonstrated promising performance in photocatalytic CO 2 conversions to fuels. However, fundamental knowledge of heterojunctions in core–shell structures is highly desired to facilitate the design of future photocatalysts. By combining advanced experimental characterizations and density functional theory (DFT) calculations, the role of the Cu 2 O@MoS 2 heterojunction in photocatalytic CO 2 conversions to fuels was investigated. We discovered that the charge dynamics and electron transfer properties of Cu2O@MoS 2 photocatalysts are altered by the heterojunction and Cu 2 O underlayer due to the electron transfer from Cu 2 O to MoS 2 and the change in CO 2 adsorption strength on the hybrid catalyst surface. Consequently, more electrons can travel to the surrounding liquid environment to be consumed by CO 2 reduction. This study provides experimental and theoretical investigations of the fundamental mechanisms of heterojunction core–shell photocatalysts.
Organic bilayers or amorphous silica films of a few nanometer thickness featuring embedded molecular wires offer opportunities for chemically separating while at the same time electronically connecting photo- or electrocatalytic components. Such ultrathin membranes enable the integration of components for which direct coupling is not sufficiently efficient or stable. Photoelectrocatalytic systems for the generation or utilization of renewable energy are among the most prominent ones for which ultrathin separation layers open up new approaches for component integration for improving efficiency. Recent advances in the assembly and spectroscopic, microscopic, and photoelectrochemical characterization have enabled the systematic optimization of the structure, energetics, and density of embedded molecular wires for maximum charge transfer efficiency. The progress enables interfacial designs for the nanoscale integration of the incompatible oxidation and reduction catalysis environments of artificial photosystems and of microbial (or biomolecular)-abiotic systems for renewable energy.
Understanding the adsorption and reactivity of carboxylic acids on oxide surfaces is of great interest in catalysis for biomass upgrading via ketonization, a carbon–carbon coupling reaction. Herein, we investigate the adsorption and reaction of acetic acid on anatase TiO 2 (101) using scanning tunneling microscopy, infrared spectroscopy, temperature programmed reaction, and density functional theory calculations. We demonstrate the adsorption of acetic acid can form two intermediates: (1) dissociated, bidentate acetate with an associated bridging hydroxyl, and (2) molecular, monodentate acetic acid. The coexistence of ordered phases with increasing monolayer (ML) saturation coverages consisting of (1) pure acetate (0.5 ML), (2) mixed acetate/acetic acid (0.67 ML), (3) mixed acetate/acetic acid (1.0 ML) and (4) pure acetic acid demonstrates similar energetics for both acetate and acetic acid species. Under ultra-high vacuum conditions, the presence of both monodentate acetic acid and bidentate acetate was observed below room temperature, while solely bidentate acetate was observed up to 575 K. The deprotonation of acetic acid produces water at 280 K, while the thermal decomposition of bidentate acetate produces ketene and acetic acid at 645 K. In conclusion, this model study provides detailed insight into the stability and reactivity of carboxylic acid surface-bound intermediates, which could participate during ketonization reactions for biomass upgrading.
Numerous inorganic materials have been identified as potential candidates for high-performance photocatalysts. However, their solar-to-energy conversion efficiencies still fail to meet commercial requirements. Here, the main hurdle is the rapid recombination of photoexcited electrons and holes in single-phase materials. A viable predicted approach to suppress charge recombination is coupling two materials to form a two-dimensional (2D) heterostructure that physically separates photoinduced electrons and holes in different layers. In this work, the heterostructure-based paradigm was tested and a scalable solution synthesis of epitaxial ZnO-MoS 2 heterostructure was developed. A 2D ZnO-MoS 2 heterostructure was synthesized under hydrothermal conditions by stabilizing intermediate Zn-hydroxide states on a functionalized MoS 2 surface. Detailed characterization showed the formation of multilayer heterostructure with MoS 2 flakes intercalated between large size ZnO plates. The performance of this heterostructure was evaluated using photocatalytic degradation of rhodamine B. A degradation efficiency of 70% was measured within 90 minutes of visible-light irradiation, almost doubling the efficiency of the corresponding single-phase materials or their physical mixtures.
There is an urgent need to provide adequate and sustainable supplies of water and food to satisfy the demand of an increasing population. Catalysis plays important roles in meeting these needs by facilitating the synthesis of hydrogen peroxide that is used in water decontamination and chemicals production, and ammonia that is used as fertilizer. However, these chemicals are currently produced with processes that are either very energy-intensive or environmentally unfriendly. This article offers the perspectives of the challenges and opportunities in the production of these chemicals, focusing on the roles of catalysis in more sustainable, alternative production methods that minimize energy consumption and environmental impact. While not intended to be a comprehensive review, the article provides a critical review of selected literature relevant to its objectives, discusses areas needed for further research, and potential new directions inspired by new developments in related fields. For each chemical, production by thermal, electro-, and photo-excited processes are discussed. Problems that are common to these approaches and their differences are identified and possible solutions suggested.
We report the direct Z-scheme heterojunction has been recently emerging as an appealing architecture for photocatalysts design. Its efficiency depends on the interfacial and structural features of the photocatalysts. Herein, the two-dimensional ZnIn 2 S 4 nanosheets are grown on the surface of CdS hollow cubes to construct the CdS@ZnIn 2 S 4 hierarchical hollow photocatalysts with chemically bonded interface. The visualized measurements based on spatial-resolved surface photovoltage spectroscopy, combined with other spectroscopic and simulation investigations, clearly disclose that the CdS@ZnIn 2 S 4 hollow cubes constitute a highly efficient direct Z-scheme system. This accounts for the stoichiometric generation of H 2 and H 2 O 2 from pure water observed for the CdS@ZnIn 2 S 4 sulfide-only photocatalysts under visible light irradiation with an apparent quantum efficiency of 1.63 % at 400 nm. The present work demonstrates an effective protocol to achieve comprehensive insights into the charge transfer route at semiconductor heterojunction, and offers a viable way for constructing efficient sulfide-only photocatalysts for driving water splitting reaction.