Search NASA⌕ Search

SEARCH · Search NASA

Results for “PLASMA CONDUCTIVITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

A two-dimensional model of plasma expansion in the ionosphere

A systematic parameter study is conducted of the motion of artificial plasma clouds across the geomagnetic field at ionospheric altitudes. The study is based on a two-dimensional numerical model. Taken into consideration are the effects solar cycle variations on the cloud evolution, as well as the effects of seasonal and geomagnetic activity conditions, and variations in the ionospheric release conditions. The effects of magnetospheric electric fields and thermospheric winds are also considered. The plasma cloud model and related assumptions are discussed, and numerical results are presented.

Ma, T.-Z.↗

Observation of frequency up-conversion in the propagation of a high-power microwave pulse in a self-generated plasma

A chamber experiment is conducted to study the propagation of a high-power microwave pulse. The results show that the pulse is experiencing frequency up-shift while ionizing the background air if the initial carrier frequency of the pulse is higher than the electron plasma frequency at the incident boundary. Such a frequency autoconversion process may lead to reflectionless propagation of a high-power microwave pulse through the atmosphere.

Kuo, S. P.↗

Effective thermal conductivities of four metal ceramic composite coatings in hydrogen-oxygen rocket firings

An experimental investigation was conducted to determine the effective conductivities of four plasma-arc-sprayed, metal-ceramic gradated coatings on hydrogen-oxygen thrust chambers. The effective thermal conductivities were not a function of pressure or oxidant-to-fuel ratio. The various materials that made up these composites do not seem to affect the thermal conductivity values as much as the differences in the thermal conductivities of the parent materials would lead one to expect. Contact resistance evolving from the spraying process seems to be the controlling factor. The thermal conductivities of all the composites tested fell in the range of 0.75 to 7.5 watts per meter kelvin.

Schacht, R. L.↗

A DSMC Study of Low Pressure Argon Discharge

Work toward a self-consistent plasma simulation using the DSMC (Direct Simulation Monte Carlo) method for examination of the flowfields of low-pressure high density plasma reactors is presented. Presently, DSMC simulations for these applications involve either treating the electrons as a fluid or imposing experimentally determined values for the electron number density profile. In either approach, the electrons themselves are not physically simulated. Self-consistent plasma DSMC simulations have been conducted for aerospace applications but at a severe computational cost due in part to the scalar architectures on which the codes were employed. The present work attempts to conduct such simulations at a more reasonable cost using a plasma version of the object-oriented parallel Cornell DSMC code, MONACO, on an IBM SP-2. Due to availability of experimental data, the GEC reference cell is chosen to conduct preliminary investigations. An argon discharge is chosen to conduct preliminary investigations. An argon discharge is examined thus affording a simple chemistry set with eight gas-phase reactions and five species: Ar, Ar(+), Ar(*), Ar(sub 2), and e where Ar(*) is a metastable.

Hash, David B.↗

The proton concentration in the vicinity of the Io plasma torus

Observations of lightning-generated whistlers conducted with the aid of the Voyager 1 plasma wave instrument during the March, 1979 encounter of Jupiter have been employed in numerous studies involving Jupiters's inner magnetosphere. In an investigation carried out by Tokar et al. (1982), the Voyager whistler observations were combined with heavy ion charged particle measurements in the Io torus to determine the light ion charge concentration along the whistler propagation paths. In the investigation, simple models were used for the plasma distribution along the propagation paths. In the present study, an improved model is used for the plasma distribution in the inner magnetosphere. The adopted model treats a plasma in diffusive equilibrium under the action of gravitational, centrifugal, and ambipolar electric field forces.

Tokar, R. L.↗

Fundamental processes in the expansion, energization, and coupling of single- and multi-Ion plasmas in space: Laboratory simulation experiments

We have conducted a laboratory investigation into the physics of plasma expansions and their associated energization processes. We studied single- and multi-ion plasma processes in self-expansions, and included light and heavy ions and heavy/light mixtures to encompass the phenomenological regimes of the solar and polar winds and the AMPTE and CRRES chemical release programs. The laboratory experiments provided spatially-distributed time-dependent measurements of total plasma density, temperature, and density fluctuation power spectra with the data confirming the long-theorized electron energization process in an expanding cloud - a result that was impossible to determine in spaceborne experiments (as e.g., in the CRRES program). These results provided the missing link in previous laboratory and spaceborne programs. confirming important elements in our understanding of such solar-terrestrial processes as manifested in expanding plasmas in the solar wind (e.g., CMES) and in ionospheric outflow in plasmaspheric fluctuate refilling after a storm. The energization signatures were seen in an entire series of runs that varied the ion species (Ar', Xe', Kr' and Ne'), and correlative studies included spectral analyses of electrostatic waves collocated with the energized electron distributions. In all cases wave energies were most intense during the times in which the suprathermal populations were present, with wave intensity increasing with the intensity of the suprathermal electron population. This is consistent with theoretical expectations wherein the energization process is directly attributable to wave particle interactions. No resonance conditions were observed, in an overall framework in which the general wave characteristics were broadband with power decreasing with increasing frequency.

Szuszczewicz, E. P.↗

Working Group 5: Measurements technology and active experiments

Technology issues identified by working groups 5 are listed. (1) New instruments are needed to upgrade the ability to measure plasma properties in space. (2) Facilities should be developed for conducting a broad range of plasma experiments in space. (3) The ability to predict plasma weather within magnetospheres should be improved and a capability to modify plasma weather developed. (4) Methods of control of plasma spacecraft and spacecraft plasma interference should be upgraded. (5) The space station laboratory facilities should be designed with attention to problems of flexibility to allow for future growth. These issues are discussed.

Whipple, E.↗

ISS Plasma Interaction: Measurements and Modeling

Ionospheric plasma interaction effects on the International Space Station are discussed in the following paper. The large structure and high voltage arrays of the ISS represent a complex system interacting with LEO plasma. Discharge current measurements made by the Plasma Contactor Units and potential measurements made by the Floating Potential Probe delineate charging and magnetic induction effects on the ISS. Based on theoretical and physical understanding of the interaction phenomena, a model of ISS plasma interaction has been developed. The model includes magnetic induction effects, interaction of the high voltage solar arrays with ionospheric plasma, and accounts for other conductive areas on the ISS. Based on these phenomena, the Plasma Interaction Model has been developed. Limited verification of the model has been performed by comparison of Floating Potential Probe measurement data to simulations. The ISS plasma interaction model will be further tested and verified as measurements from the Floating Potential Measurement Unit become available, and construction of the ISS continues.

Barsamian, H.↗

The structure of shocks with thermal conduction and radiative cooling

A general analysis is presented of the structure of a steady state, plane-parallel shock wave in which both thermal conduction and radiative cooling are important. The fluid is assumed to have a perfect-gas equation of state, with radiative cooling a function only of its temperature and density. Conduction in both diffusive and saturated regimes is treated. For the case of a strong shock, with conductivity and cooling function varying as power laws in temperature, approximate analytic solutions describing the shock wave are derived. For a plasma of solar composition, conduction is found to have a significant effect on the shock temperature and overall thickness of the postshock layer only for shock velocities greater than about 30,000 km/s, corresponding to shock temperatures greater than about 10 to the 10th K, but it affects the local structure of parts of the shock wave at much lower velocities. The effects of conduction are greatly enhanced if the heavy-element abundance is increased.

Lacey, Cedric G.↗

On heat conduction in multicomponent, non-Maxwellian spherically symmetric solar wind plasmas

A generalized expression for the steady-state heat flux in multicomponent, moderately non-Maxwellian spherically symmetric plasmas is presented and discussed. The work was motivated by the inability of the simple, Fourier-type formula for the thermal conductivity to explain the observed correlations in the solar wind. The results hold for situations not far from local thermodynamic equilibrium. The generalized expression includes not only correlations that have been observed but also correlations not sought for previously.

Cuperman, S.↗

Birkeland currents in the plasma sheet

A search was conducted for the signatures of Birkeland currents in the Earth's magnetic tail, using observed values of B(sub x) and B(sub y) from large sets of spacecraft data. The data were binned by x and y for -10 greater than x(sub GSM) greater than -35 and absolute value of y(sub GSM) less than or equal to 20 R(sub E) (less than or equal to 30 R(sub E) for x(sub GSM) less than or equal to -25 R(sub E)) and in each bin their distribution in the (B(sub x), B(sub y)) plane was fitted by least squares to a piecewise linear function. That gave average x-y distributions of the flaring angle between B(sub xy) and the x direction, as well as that angle's variation across the thickness of the plasma sheet. Angles obtained in the central plasma sheet differed from those derived near the lobe boundary. That is the expected signature if earthward or tailward Birkeland current sheets are embedded in the plasma sheet, and from this dfiference we derived the dawn-dusk profiles of the tail Birkeland currents for several x(sub GSM) intervals. It was found that (1) the Birkeland currents have the sense of region 1 currents, when mapped to the ionosphere; (2) both the linear current density (kiloamperes/R(sub E)) and the net magnitude of the field-aligned currents decrease rapidly down the tail; (3) the total Birkeland current at x approximately equals -10 R(sub E) equals approximately equals 500-700 kA, which is approx. 30% of the net region 1 current observed at ionospheric altitudes, in agreement with model mapping results; and (4) the B(sub z) and B(sub y) components of the interplanetary magnetic field influence the distribution of Birkeland currents in the tail.

Tsyganenko, Nikolai A.↗

Laboratory observations of electron temperature in the wake of a sphere in a streaming plasma

A parametric study was performed of electron-temperature variation in the wake of a conducting sphere in a streaming plasma. The flow conditions were varied as follows: the ambient electron temperatures in the range from 850 to 2450 K; the ambient electron densities in the range from 0.0005 to 0.00007 per cu cm; and body potentials relative to plasma potential in the range from +1.7 to -2.8 V for an ion-beam energy of approximately 4 eV. Electron-temperature enhancements were observed which ranged up to 200 per cent above ambient in the nearest proximity of the body surface. The magnitude of the enhancement depends upon the ambient density, temperature, and body potential.

Oran, W. A.↗

Toward the origins of binding energy shifts and “satellites” formation during plasma-XPS measurements

In-plasma x-ray photoelectron spectroscopy (plasma-XPS) emerges as a powerful platform for real-time, in situ chemical analysis under conditions relevant to semiconductor processing and other plasma-enabled technologies. This study investigates the origins of binding energy (BE) shifts and the formation of “satellite” peaks observed during plasma-XPS measurements across conductive, dielectric, and gas-phase systems. Using a standard laboratory-based ambient pressure XPS apparatus coupled with an alternating current (AC)-driven capacitively coupled plasma source, we demonstrate that metastable surface species, such as transient Au oxides, can be detected during plasma exposure, revealing chemical states that are hardly accessible using conventional ultrahigh vacuum (UHV) XPS. In dielectric samples (e.g., undoped diamond, sapphire), we observe pressure- and plasma-type-dependent BE shifts of more than 50 eV, attributed to x-ray-induced and plasma-mediated surface charging. These shifts are mitigated at higher pressures/plasmas or in electronegative plasmas (e.g., O 2 ), the latter due to enhanced charge compensation mechanisms involving slow negative ions. For gas-phase species, AC-plasma excitation leads to spectral broadening and the emergence of “satellite” peaks with energy separations of a few electron volts, linked to oscillating local plasma potentials in the probing volume. Furthermore, these findings highlight the complex and important interplay between plasma parameters, surface charging, and local electric fields in shaping XPS spectra. Overall, plasma-XPS emerges as a critical metrological tool for probing transient surface chemistry, with implications for semiconductor processing, material synthesis, and plasma diagnostics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Low-temperature oxygen-plasma effects on surveyor plasmo-clay coating

The objective was to determine whether the reflectance of the degraded plasmo-clay thermal control coating could be restored by exposing it to an oxygen plasma. An experiment was conducted to determine whether bulk radiation damage would be removed by a reabsorption of oxygen ions into the pigment crystal lattice. Results show that the oxygen plasma treatment can eliminate some of the lunar environment-induced degradation on the plasmo-clay coating. Visual observations of the lunar soil on the surface after plasma treatment indicated that it was still highly absorbent to light. Therefore, part of the residual discoloration could be due to lunar soil.

Gillette, R. B.↗

Cold plasma distribution above a few thousand kilometers at high latitudes

Great advances with respect to the study of the earth's magnetosphere could be achieved in connection with the launch of the Dynamics Explorer (DE) 1 and 2 spacecraft. These advances were made possible partly because of the unique combination of coplanar orbits which simultaneously sample the low altitude ionospheric and atmospheric signature (DE-2) and the high altitude phenomena of the inner magnetosphere (DE-1). It was, thus, feasible to obtain new measurements of the coupling of plasmas and fields between these fundamentally important regions. One basic element of the coupling involves the interchange of low energy plasma between the ionosphere and magnetosphere. The flow characteristics of the low energy plasma are indicators of the magnetospheric and ionospheric electric fields which drive the current system. The Retarding Ion Mass Spectrometer (RIMS) instrument has been designed for conducting measurements regarding this plasma population. Attention is given to details regarding RIMS, an example RIMS orbit, plasma trough characteristics, and polar cap phenomena.

Chappell, C. R.↗

Industrial ion source technology

Plasma probe surveys were conducted in a 30-cm source to verify that the uniformity in the ion beam is the result of a corresponding uniformity in the discharge-chamber plasma. A 15 cm permanent magnet multipole ion source was designed, fabricated, and demonstrated. Procedures were investigated for texturing a variety of seed and surface materials for controlling secondary electron emission, increasing electron absorption of light, and improved attachment of biological tissue for medical implants using argon and tetrafluoromethane as the working gases. The cross section for argon-argon elastic collisions in the ion-beam energy range was calculated from interaction potentials and permits calculation of beam interaction effects that can determine system pumping requirements. The data also indicate that different optimizations of ion-beam machines will be advantageous for long and short runs, with 1 mA-hr/cm being the rough dividing line for run length. The capacity to simultaneously optimize components in an ion-beam machine for a single application, a capacity that is not evident in competitive approaches such as diode sputtering is emphasized.

Kaufman, H. R.↗

Average electric wave spectra across the plasma sheet and their relation to ion bulk speed

Using 4 months of tail data obtained by the ELF/MF spectrum analyzer of the wave experiment and the three-dimensional plasma instrument on board the AMPTE/IRM satellite, a statistical survey on the electric wave spectral density in the earth's plasma sheet has been conducted. More than 50,000 10-s-averaged electric wave spectra were analyzed with respect to differences between their values in the inner and outer central plasma sheet and the plasma sheet boundary layer as well as their dependence on radial distance and ion bulk speed. High-speed flows are dominated by broadband electrostatic noise with highest spectral densities in the plasma sheet boundary, where broadband electrostatic noise also exists during periods of low-speed flows. The broadband electrostatic noise has a typical spectral index of about -2. During low-speed flows the spectra in the central plasma sheet show distinct emissions at the electron cyclotron odd half-harmonic and upper hybrid frequency. Wave intensities during episodes of fast perpendicular flows are higher than those associated with fast parallel flows.

Baumjohann, W.↗