TRAPATT oscillations in a p-i-n avalanche diode
P-i-n avalanche diode trapped plasma avalanche triggered transit /TRAPATT/ oscillations characteristics and voltage waveform under square wave driving current, using computer program
Parker, D.↗
SEARCH · Search NASA
Results for “PLASMA OSCILLATION”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Current sheath dynamics and magnetosonic oscillations in magnetoplasmas
Dynamics of plasma current sheath and magnetosonic resonance in magnetoplasmas
MAGNETOSONIC RESONANCE↗
Simulations of vertical displacement oscillatory modes and global Alfvén Eigenmodes in JET geometry
Vertical Displacement Oscillatory Modes (VDOM), with frequency in the Alfvén range, are natural modes of oscillation of magnetically confined laboratory plasmas with elongated cross-section. These axisymmetric modes arise from the interaction between the plasma current, which is in equilibrium with currents flowing in external coils, and perturbed currents induced on a nearby conducting wall. The restoring force exerted by these perturbed currents on the vertical motion of the plasma column leads to its oscillatory behavior. An analytic model for VDOM was proposed based on an idealized 'straight tokamak' equilibrium with uniform equilibrium current density. This article introduces the first numerical simulations of VDOM in a realistic JET tokamak configuration, using the extended-MHD code NIMROD and drawing comparisons with Global Alfvén Eigenmodes (GAE). The results show qualitative agreement with analytic predictions regarding mode frequency and radial structure, supporting the identification of VDOM as a fundamental oscillation mode in tokamak plasmas. VDOM and GAE are modeled in a representative JET discharge, where axisymmetric perturbations with toroidal mode number n = 0 driven unstable by fast ions were observed. The two modes are examined separately using a forced oscillator within the NIMROD code, which enables a comparison of their characteristics and helps identify the experimentally observed mode possibly as a GAE.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
Velocity-space distribution function of fast ions in a sawtoothing plasma
This study explores the influence of sawtooth oscillations on the velocity space distribution of fast ions in tokamak plasma discharges. The relevant Fokker–Planck equation for fast ions is solved analytically. Two distinct effects arising from the temperature drop associated with a sawtooth crash and their impact on the distribution function of fast ions are considered. The first effect involves the modulation of the fusion alpha particle source on the timescale of the sawtooth period, linked to the drop in fusion yield resulting from the sawtooth temperature relaxations. The second effect is tied to the increase of the slowing-down time during the sawtooth ramp, causing particles born later in the sawtooth cycle to experience reduced slowing down compared to those born right after the crash, creating an accumulation-like mechanism at higher energies. In regimes where the sawtooth period is shorter than the fast ion slowing-down time, the combined influence of these effects gives rise to fast ion distribution functions that transiently exhibit positive slopes in velocity space.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
Low- n stability and plasma response to RMP in various STEP scenarios
The low-n (n is the toroidal mode number) magnetohydrodynamic (MHD) stability and plasma response are numerically investigated for various scenarios designed for STEP, that are relevant for the H-mode pedestal analysis. Control of the edge-localized modes (ELMs) with externally applied resonant magnetic perturbations (RMPs) is considered. Optimization of the ELM control coil current configuration, based on the computed plasma MHD response and well-established figures of merit validated on present-day experiments, finds reasonable robustness of a fixed coil phasing (for a given n-number) to control ELMs in all five STEP plasmas considered. Based on certain semi-empirical criteria, the required coil current to achieve ELM suppression is estimated to be about 10–20 kAt with the n = 1 or 2 RMP configuration and about 100–200 kAt for the n = 4 RMP. Systematic linear stability calculations are used to map out stability windows for the low-n kink-peeling modes, in terms of the ideal-wall location and variation of the edge safety factor q 95 with respect to the target design. The kink-peeling stability boundary is found to be generally sensitive to the q 95 variation, which has implications for achieving the quiescent H-mode regime in STEP. Full toroidal quasilinear initial-value simulations for these STEP plasmas find that generation of the edge-harmonic oscillations (EHOs) depends sensitively on the plasma scenario, the initial linear stability of the kink-peeling modes, the initial plasma toroidal flow and q 95 . In general, it is easier (more robust) to access the EHO-regime for two of the cases considered with smaller plasma volume and higher on-axis safety factor. Finally, quasilinear simulations find robust density pumpout due to applied RMPs in these STEP plasmas, but the effect on the plasma toroidal flow varies among different cases.
EHO↗
Nonlocal analysis of finite-beam-driven instabilities
The fully kinetic integral eigenmode equation in wave-number space is used to describe the nonlocal behavior of electrostatic waves in an electron-beam plasma, which are studied in the low-temperature-beam regime and the warm-beam regime. The case of strongly magnetized electrons and unmagnetized ions, which corresponds to the waves in a frequency range from the lower-hybrid to the electron plasma frequency, is examined. Three wave modes are found. The first group consists of modes that have dispersive properties similar to the uniform, infinite beam-plasma system. Depending on the beam width, the growth rates are strongly reduced. The second group, surface modes, are localized at the periphery of the beam region and are less unstable than the unstable modes of the first group. The third group represents natural oscillations of the background plasma. These modes are virtually unaffected by the beam.
Serizawa, Y.↗
Coherent High-Frequency Axial Oscillations in a Partially Magnetized Direct Current Magnetron Discharge
High-frequency oscillations are observed in a neon plasma of a direct current magnetron discharge. At low discharge currents, we see highly coherent 60 MHz fluctuations. Above a distinct current threshold, secondary 5–10 MHz fluctuations emerge in addition to turbulent fluctuations in the 60–100 MHz range. The oscillations in the total discharge current suggest axial wave propagation. A lower-hybrid wave theory is invoked to model the high-frequency oscillations. Here, we attribute the low-frequency modes to a turbulence-driven inverse cascade process, as suggested by recent simulations.
33 ADVANCED PROPULSION SYSTEMS↗
Simulations of auroral plasma processes - Electric fields, waves and particles
Plasma processes driven by current sheets of finite thicknesses in an ambient magnetized plasma are studied using a 2 1/2 dimensional particle-in-cell code, and similarities are found between simulated plasma processes and those observed in the auroral plasma. Current sheets are shown to be bounded by large perpendicular electric fields occurring near their edges above the conducting boundary. Shaped potential structures form when the current sheets are narrow, and when the current sheets are wide, potential structures develop a significant parallel potential drop such that the electrons are accelerated upwards. Downward parallel electric fields of variable strength are noted in the downward current region, and double layer formation is seen in both narrow and wide current sheets. High frequency oscillations near the electron plasma frequency and its harmonic are seen, and low frequency waves are observed.
Singh, Nagendra↗
Coriolis forces modify magnetostatic ponderomotive potentials
It is possible to produce a ponderomotive effect in a plasma system without time-varying fields, if the plasma flows over spatial oscillations in the field. This can be achieved by superimposing a spatially oscillatory perturbation on a guide field, then setting up an electric field perpendicular to the guide field to drive flow over the perturbation. However, subtle distinctions in the structure of the resulting electric field can entirely change the behavior of the resulting ponderomotive force. Previous work has shown that, in slab models, these distinctions can be explained in terms of the polarization of the effective wave that appears in the co-moving frame. Here, we consider what happens to this picture in a cylindrical system, where the transformation to the co-moving (rotating) frame is not inertial. It turns out that the non-inertial nature of this frame transformation can lead to counterintuitive behavior, partly due to the appearance of parallel (magnetic-field-aligned) electric fields in the rotating frame even in cases where none existed in the laboratory frame. Apart from the academic interest of this study, the practical impact lies in being better able to anticipate the antenna configuration on the plasma periphery of a cylindrical plasma that will lead to optimal ponderomotive barrier formation in the interior plasma.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
Time decay for cyclotron harmonics
Time decay calculations of cyclotron harmonic signal and application to Alouette satellite
CYCLOTRON RESONANCE↗
Amplitude noise generating mechanisms in plasma lasers
Plasma lasers, investigating striation oscillations and excess noise phenomena and generation mechanisms
Bray, C. W.↗
The onset of Alfvenic turbulence
An investigation is conducted on how low-frequency MHD oscillations in a warm plasma may undergo a transition from a coherent state to one of turbulence. A driven/dissipative derivative nonlinear Schroedinger equation is derived from the fluid equations. The time evolution of an arbitrary spectrum of waves is analyzed in the case where one k-mode is unstable, with the rest damped. It is found that the transition from order to chaos in the driven/dissipative system is correlated with the existence or absence of 'breathing' solitons in the associated conservative system.
Ghosh, S.↗
Transient events in the outer magnetosphere - Boundary waves of flux transfer events?
Simultaneous solar wind and magnetospheric observations are presented for a series of flux transfer events (FTEs) observed by the UKS and IRM spacecraft in the outer prenoon magnetosphere on October 28, 1984. The CCE satellite, located near local noon, observed an enhancement in the magnetospheric magnetic field strength 4 min prior to each IRM/UKS event, suggesting the antisunward propagation of a compression in the magnetopause surface. It is suggested that these compressions resulted from wavy magnetopause motion driven by variations in the solar wind dynamic pressure applied to the magnetosphere, rather than the motion of FTEs formed by magnetic merging. This hypothesis is confirmed by the fact that the events previously identified as FTEs occurred during a sequence of quasi-periodic (5-6 min) oscillations in the magnetospheric plasma velocity and magnetic field.
Sibeck, D. G.↗
Evaluation of Pulse Counting for the Mars Organic Mass Analyzer (MOMA) Ion Trap Detection Scheme
The Mars Organic Mass Analyzer is being developed at Goddard Space Flight Center to identify organics and possible biological compounds on Mars. In the process of characterizing mass spectrometer size, weight, and power consumption, the use of pulse counting was considered for ion detection. Pulse counting has advantages over analog-mode amplification of the electron multiplier signal. Some advantages are reduced size of electronic components, low power consumption, ability to remotely characterize detector performance, and avoidance of analog circuit noise. The use of pulse counting as a detection method with ion trap instruments is relatively rare. However, with the recent development of high performance electrical components, this detection method is quite suitable and can demonstrate significant advantages over analog methods. Methods A prototype quadrupole ion trap mass spectrometer with an internal electron ionization source was used as a test setup to develop and evaluate the pulse-counting method. The anode signal from the electron multiplier was preamplified. The an1plified signal was fed into a fast comparator for pulse-level discrimination. The output of the comparator was fed directly into a Xilinx FPGA development board. Verilog HDL software was written to bin the counts at user-selectable intervals. This system was able to count pulses at rates in the GHz range. The stored ion count nun1ber per bin was transferred to custom ion trap control software. Pulse-counting mass spectra were compared with mass spectra obtained using the standard analog-mode ion detection. Prelin1inary Data Preliminary mass spectra have been obtained for both analog mode and pulse-counting mode under several sets of instrument operating conditions. Comparison of the spectra revealed better peak shapes for pulse-counting mode. Noise levels are as good as, or better than, analog-mode detection noise levels. To artificially force ion pile-up conditions, the ion trap was overfilled and ions were ejected at very high scan rates. Pile-up of ions was not significant for the ion trap under investigation even though the ions are ejected in so-called 'ion-micro packets'. It was found that pulse counting mode had higher dynamic range than analog mode, and that the first amplification stage in analog mode can distort mass peaks. The inherent speed of the pulse counting method also proved to be beneficial to ion trap operation and ion ejection characterization. Very high scan rates were possible with pulse counting since the digital circuitry response time is so much smaller than with the analog method. Careful investigation of the pulse-counting data also allowed observation of the applied resonant ejection frequency during mass analysis. Ejection of ion micro packets could be clearly observed in the binned data. A second oscillation frequency, much lower than the secular frequency, was also observed. Such an effect was earlier attributed to the oscillation of the total plasma cloud in the ion trap. While the components used to implement pulse counting are quite advanced, due to their prevalence in consumer electronics, the cost of this detection system is no more than that of an analog mode system. Total pulse-counting detection system electronics cost is under $250
Van Amerom, Friso H.↗
Thermionic Properties of Carbon Based Nanomaterials Produced by Microhollow Cathode PECVD
Thermionic emission is the process in which materials at sufficiently high temperature spontaneously emit electrons. This process occurs when electrons in a material gain sufficient thermal energy from heating to overcome the material's potential barrier, referred to as the work function. For most bulk materials very high temperatures (greater than 1500 K) are needed to produce appreciable emission. Carbon‐based nanomaterials have shown significant promise as emission materials because of their low work functions, nanoscale geometry, and negative electron affinity. One method of producing these materials is through the process known as microhollow cathode PECVD. In a microhollow cathode plasma, high energy electrons oscillate at very high energies through the Pendel effect. These high energy electrons create numerous radical species and the technique has been shown to be an effective method of growing carbon based nanomaterials. In this work, we explore the thermionic emission properties of carbon based nanomaterials produced by microhollow cathode PECVD under a variety of synthesis conditions. Initial studies demonstrate measureable current at low temperatures (approximately 800 K) and work functions (approximately 3.3 eV) for these materials.
Haase, John R.↗
NSTX-U research advancing the physics of spherical tokamaks
Abstract The objectives of NSTX-U research are to reinforce the advantages of STs while addressing the challenges. To extend confinement physics of low- A , high beta plasmas to lower collisionality levels, understanding of the transport mechanisms that set confinement performance and pedestal profiles is being advanced through gyrokinetic simulations, reduced model development, and comparison to NSTX experiment, as well as improved simulation of RF heating. To develop stable non-inductive scenarios needed for steady-state operation, various performance-limiting modes of instability were studied, including MHD, tearing modes, and energetic particle instabilities. Predictive tools were developed, covering disruptions, runaway electrons, equilibrium reconstruction, and control tools. To develop power and particle handling techniques to optimize plasma exhaust in high performance scenarios, innovative lithium-based solutions are being developed to handle the very high heat flux levels that the increased heating power and compact geometry of NSTX-U will produce, and will be seen in future STs. Predictive capabilities accounting for plasma phenomena, like edge harmonic oscillations, ELMs, and blobs, are being tested and improved. In these ways, NSTX-U researchers are advancing the physics understanding of ST plasmas to maximize the benefit that will be gained from further NSTX-U experiments and to increase confidence in projections to future devices.
74 ATOMIC AND MOLECULAR PHYSICS↗
Random phase approximation for a plasma in an external electric field.
Random phase approximation for plasma, establishing perturbed electron distribution in oscillating electric field
VLASOV EQUATION↗
Feedback mechanism in self-oscillations excited by the ion-ion instability
The self-excitation of the slow beam mode has been studied in an experiment performed with a double-plasma device having multidipole confinement. The oscillations observed are nearly monochromatic. The feedback mechanism which produces the frequency selection is probably provided by the backward acoustic mode, rather than the instantaneous mechanism proposed by Fujita el al. (1977).
Alport, M. J.↗