Search NASA⌕ Search

SEARCH · Search NASA

Results for “PLASMA POTENTIAL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Characterization of SOL profiles and turbulence in ICRF-heated plasmas in EAST

Scrape-off layer (SOL) profiles and turbulence in ion cyclotron range of frequency (ICRF)-heated plasmas are investigated by the reciprocating probe diagnostic system (FRPs) and gas puff imaging (GPI) diagnostic in EAST. A radio-frequency (RF) sheath potential reaching up to 100 V is identified proximate to the ICRF antennas. Notably, the amplitude of this RF sheath potential escalates in response to rising ICRF power and inversely with plasma density. When a RF sheath is present in the far SOL, a pronounced density ‘shoulder’ forms in front of the ICRF antennas, while the ‘shoulder’ fade away as the antenna and associated RF sheath shift outwards. A strong E r shear is revealed by measurements from both FRPs and GPI. Analysis of the poloidal wave number-frequency spectrum reveals suppression of high-frequency turbulence in the far SOL due to the RF sheath. This effect is manifested in the reduced autocorrelation time τ c and reduced average blob size δ blob of the SOL plasma. Intriguingly, the poloidal propagation direction of the low-frequency turbulence reverses from the electron to the ion diamagnetic drift direction at the RF sheath location. A surge of tungsten impurity is potentially attributed to the heightened interaction between the SOL plasmas and the wall material. Shifting the ICRF antennas outward, to alleviate heat spots, results in the relocation of the RF sheath to the shaded region of the main limiter. This shift amplifies the radial velocity of blobs in the far SOL and concurrently diminishes the SOL density when compared to conditions without ICRF injection. The properties of ion saturation current fluctuations are consistent with the stochastic model predictions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

The effect of metastable atomic levels in neutral tungsten for erosion and impurity transport applications

Long-lived metastable states in neutral tungsten are shown to potentially impact measurements of tungsten erosion from plasma facing components. Time-dependent collisional radiative modeling of neutral tungsten is used to analyze the role of these states in tungsten emission and ionization. The large number of non-quasistatic atomic states in neutral tungsten can take on the order of milliseconds to reach equilibrium, depending on plasma conditions, causing erosion measurements to be affected by the metastable populations. Previous measurements using the 400.88 nm tungsten emission line could be affected by these non-quasistatic metastable effects. Therefore, a scheme for measuring the relative metastable fractions is proposed through simultaneous observation of multiple ultraviolet spectral lines of neutral W. The accuracy of gross erosion measurements could potentially be increased by inclusion of these previously unconsidered metastable effects.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2019

Effects of Different Variants of Plasma Nitriding on the Properties of the Nitrided Layer

Several process variants of plasma nitriding can be distinguished depending on the location of the voltage introduction. The aim of this study is to compare three different variants of plasma nitriding (DC plasma nitriding, active screen plasma nitriding, and active screening process with bias voltage application) extended by the study of the coverage of active screen on C45E unalloyed steel, using two different N{sub 2}-H{sub 2} gas mixtures. The thickness of the compound layer was measured using a scanning electron microscope, the phase analysis was performed by an x-ray diffractometer, and the nitrogen contents were analyzed by glow discharge optical electron spectroscopy. The results showed that the layer thickness and the surface hardness were higher by using active screen-biased plasma nitriding with high N{sub 2} content gas mixture. Besides, the lid of the active screen did not influence significantly the chemical composition of the compound layer.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Insights into elevated temperature tensile deformation mechanisms and kink banding in additively manufactured tungsten

Additive manufacturing (AM) potentially enables fabrication and repair of plasma facing components (PFCs) of tungsten. However, deformation mechanisms in AM-fabricated tungsten under service-relevant thermomechanical conditions remain unknown majorly due to challenges in achieving crack-free W. This study reveals the deformation mechanisms operative under tension at 800 °C and 1200 °C in the electron beam melting powder bed fusion (EBM-PBF) fabricated W. Textured columnar grains with mixed <001 >/<111 >|| build-direction were observed. Strong anisotropy in tensile properties persisted across test temperatures, and all specimens exhibited extensive deformation-induced banding phenomena. Grain boundary character analysis of the deformed specimens indicated that these deformation bands were kink bands with tilt grain boundaries prominently present at the band-matrix interface. Interestingly, the material within the kink bands rotated toward higher resolved shear stress, providing insights into the origins of kink band formation in body-centered cubic refractory metals. Intragranular misorientation axis analysis revealed that plasticity was dominated by {110} <111 > slip at 800 °C, whereas additional (213)[11⁢̄1] and (112)[11⁢̄1] slip systems activated at 1200 °C. A dense low-angle boundary networks observed near fractured surface indicated the onset of dynamic recrystallization. Results reveal plasticity governing mechanisms in AM-fabricated W under power plant-relevant conditions, and provide insights into kink band attributes in refractory metals.

Mayes, Riley [ORNL] (ORCID:000900089307010X)↗
DOE OSTI2026

ARC physics basis–magnetohydrodynamics

ARC is designed to produce 400 ⁢MW of net electricity and prove the commercial feasibility of a fusion power plant. In order to achieve this goal ARC has to operate with optimal core performance in a stationary scenario that minimises wear on the first wall and divertor. This requires avoiding or mitigating magnetohydrodynamic (MHD) instabilities which have the potential to not only degrade the plasma core but also lead to deleterious transient heat loads on plasma facing components. Therefore, this work aims at characterising the MHD stability of the high performance ARC scenario and inform the design of error field correction coils. Firstly, simulations of vertical displacement events show that an in-vessel coil is not needed and instead the poloidal shaping coils can be used to control vertical stability. These simulations also inform the demands on the corresponding coil power supplies. Stability analysis of the ideal kink mode with or without a conducting wall and kinetic effects suggests that the ARC baseline scenario operates deeply in the stable region. Using RDCON, tearing modes at the 𝑚/𝑛 =2/1 and 3/2 surfaces (with poloidal mode number 𝑚, and toroidal mode number 𝑛) are shown to be linearly stable, and including thermal transport effects in the rational surfaces lead to further stabilisation. However, other transient plasma instabilities can seed neoclassical tearing modes (NTMs). The marginally stable width of NTMs in ARC strongly depends on the internal inductance and can fall below 0.1% of the normalised poloidal flux. Furthermore, an empirical cross-machine model of the 𝑛 =1 error field leading to a disruption predicts a critical error field larger than SPARC but smaller than ITER. Three-dimensional coils can be designed with the Generalised Purturbed Equilbium Code based on a simple model that calculates the maximum correctable error field that is limited by the neoclassical toroidal viscosity torque. Broad scans of different coil geometries identify a set of 2 rows of off-midplane coils to be a suitable solution. It is also determined that such a set of three-dimensional coils is capable of correcting 𝑛 =2 error fields to some degree and creating strong enough 𝑛 =2 or 𝑛 =3 edge resonant perturbation fields for the suppression of edge-localised modes at reasonable coil currents. The final design of the first ARC will be further informed by results from SPARC.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Staircases of passive and active scalar concentration in cellular flow

This paper develops a unified model for staircase formation in both passive and active scalar systems, building upon prior numerical studies by offering new heuristic and physical insights. While prior studies primarily reported numerical results, they did not explore the underlying unifying physics that governs both types of scalar transport; this work addresses that gap by identifying shared mechanisms across both cases. Results of studies of passive and active scalar staircase formation in cellular flows are presented. Staircase formation in cellular flows occurs due to the interplay of fast mixing within cells and slow transport across the inter-cell boundary. The cell boundary emerges as a de facto transport barrier. Special attention is focused on the effects of cellular fluctuations and noise upon staircase structure. A forced, fluctuating vortex array model is used to drive the underlying flow structure. Cellular Peclet number and staircase profile curvature are identified as figures-of-merit to quantify the resiliency of layering. These are related to simple, multi-scatterer scalar random walk models. Results for Peclet number and curvature scaling with flow excitation are presented. We also study staircases of magnetic potential evolving in two-dimensional magnetohydrodynamics as examples of layering of active scalar concentration. Formation of magnetic potential staircases is indeed observed. Flux expulsion inhibits the intercellular transport of magnetic potential and strengthens staircase barriers. Magnetic staircases can be supported against resistive decay by magnetic potential noise forcing. Implications for staircase formation in magnetic confinement experiments are discussed.

Control theory↗
DOE OSTI2022

Ultra-High Temperature Thermal Barrier Coating Development and Validation

The most effective method to improve industrial gas turbine power is to increase firing temperature. To maintain component durability at these higher temperatures, thermal barrier coatings (TBC’s) are playing an increasing role in protecting turbine hardware. TBC’s have been successfully used on Solar Turbines’ combustor liners and turbine airfoils, but there is a need for TBC’s that can operate at higher temperatures. Based on recent, favorable rig testing experience, Solar recognized that yttrium aluminum garnet (YAG) TBC’s made by the Solution Precursor Plasma Spray Process (SPPS) has great potential for higher turbine temperatures. This testing verified the thermal cycle durability of the SPPS YAG TBC’s, as well as demonstrated that the temperature drop through the SPPS YAG TBC was twice that measured across a companion APS YSZ TBC. The SPPS YAG TBC with the potential for a 200°C improvement in temperature capability represents a materials breakthrough. The SPPS process also produces a number of unique microstructural features that confer superior properties. SPPC TBC’s have ultra-fine splats that increase toughness and erosion resistance, and the process can be tailored to produce through-thickness cracks for strain-tolerance and control porosity for lower thermal conductivity and increase coating abradability. This proposal would include further development of SPPS YAG density-graded coatings, optimization of the application process, and validation of higher temperature capability and durability through rig and engine testing of coated combustion liners and turbine outer air seals. The technology would be advanced from a TRL 3 to a proposed TRL 6 by overcoming processing concerns on efficiency, application distance and optimization of a graded coating without impacting coating durability by demonstrating the coating performance on components in rig and development gas turbine engine testing.

36 MATERIALS SCIENCE↗
DOE OSTI2023

First M87 Event Horizon Telescope Results. IX. Detection of Near-horizon Circular Polarization

Event Horizon Telescope (EHT) observations have revealed a bright ring of emission around the supermassive black hole at the center of the M87 galaxy. EHT images in linear polarization have further identified a coherent spiral pattern around the black hole, produced from ordered magnetic fields threading the emitting plasma. Here we present the first analysis of circular polarization using EHT data, acquired in 2017, which can potentially provide additional insights into the magnetic fields and plasma composition near the black hole. Interferometric closure quantities provide convincing evidence for the presence of circularly polarized emission on event-horizon scales. We produce images of the circular polarization using both traditional and newly developed methods. All methods find a moderate level of resolved circular polarization across the image ( $\langle$| v |$\rangle$ < 3.7%), consistent with the low image-integrated circular polarization fraction measured by the Atacama Large Millimeter/submillimeter Array (| v int |< 1%). Despite this broad agreement, the methods show substantial variation in the morphology of the circularly polarized emission, indicating that our conclusions are strongly dependent on the imaging assumptions because of the limited baseline coverage, uncertain telescope gain calibration, and weakly polarized signal. We include this upper limit in an updated comparison to general relativistic magnetohydrodynamic simulation models. This analysis reinforces the previously reported preference for magnetically arrested accretion flow models. We find that most simulations naturally produce a low level of circular polarization consistent with our upper limit and that Faraday conversion is likely the dominant production mechanism for circular polarization at 230 GHz in M87*.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Resonant Emittance Mixing of Flat Beams in Plasma Accelerators

Linear colliders rely on high-quality flat beams to achieve the desired event rate while avoiding potentially deleterious beamstrahlung effects. Here, we show that flat beams in plasma accelerators can be subject to quality degradation due to emittance mixing. This effect occurs when the beam particles' betatron oscillations in a nonlinearly coupled wakefield become resonant in the horizontal and vertical planes. Emittance mixing can lead to a substantial decrease of the luminosity, the main quantity determining the event rate. In some cases, the use of laser drivers or flat particle beam drivers may decrease the fraction of resonant particles and, hence, mitigate emittance deterioration.

43 PARTICLE ACCELERATORS↗
DOE OSTI2025

Two Mechanisms Limiting the Emitted Electron Current from a Cathode to an Anode

It is known that the current of emitted electrons flowing through a plasma can saturate upon formation of a potential well adjacent to the cathode (the “space charge effect”). Here, we demonstrate another saturation mechanism that will often set a more restrictive limit on the global current. When “backflow saturation” occurs, the cathode sheath weakens to allow emitted electrons that already entered the plasma to backflow to the cathode. This effect could not be captured by studies modelling the cathode sheath by itself because its origin is coupled to processes in the interior plasma and anode sheath. By modeling a full plasma diode, we show that depending on conditions the global current can be limited in four ways; by backflow alone, by space charge alone, by both mechanisms in a stable cooperative form, or by both in a competing oscillatory form. Published by the American Physical Society 2025

Laboratory plasma↗
DOE OSTI2022

Wave-supported hybrid fast-thermal p- 11 B fusion

The possibility of fusion ignition in proton–Boron 11 plasma is strongly enhanced if the energy from the fusion-produced α particles is channeled to fast protons, but in an environment in which most of the protons are thermally distributed. This hybrid of thermonuclear fusion and beam-plasma fusion offers surprisingly large advantages to either purely thermonuclear or purely beam-plasma fusion, neither of which can by themselves significantly exceed the large bremsstrahlung radiation emitted by the proton–Boron 11 plasma. Furthermore, the hybrid scheme has the potential to reduce the confinement time of the reactants that is required to achieve ignition by an order of magnitude.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Role of electrostatic perturbation on kinetic resistive wall mode with application to spherical tokamak

Abstract A more complete non-perturbative magnetohydrodynamic (MHD)-kinetic hybrid formulation is developed by including the perturbed electrostatic potential δφ in the particle Lagrangian. The fluid-like counter-parts of the hybrid equations, in the Chew-Goldberger-Low high-frequency limit, are also derived and utilized to test the new toroidal implementation in the MARS-K code. Application of the updated non-perturbative hybrid model for a high- β spherical tokamak plasma in MAST finds that the perturbed electrostatic potential generally plays a minor role in the n = 1 ( n is the toroidal mode number) resistive wall mode instability. The effect of δφ is largely destabilizing, with the growth rate of the instability increased by several (up to 20) percent as compared to the case without including δφ . A similar relative change is also obtained for the kinetic-induced resonant field amplification effect at high- β in the MAST plasma considered. The updated capability of the MARS-K code allows quantitative exploration of drift kinetic effects on various MHD instabilities and the antenna-driven plasma response where the electrostatic perturbation, coupled to magnetic perturbations, may play important roles.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Experimental study of ECH pre-ionization on J-TEXT

An experimental study on electron cyclotron heating (ECH) pre-ionization has been conducted on J-TEXT in support of the joint experiment research for ITER plasma initiation. In this experiment, ECH power was injected to the vessel before the application of loop voltage ionize the neutral gas and form the initial plasma or so-called pre-plasma. The impact of several significant factors, such as magnetic field configuration, pre-fill gas pressure, ECH toroidal injection angle and ECH power on the evolution of pre-plasma are systematically studied, aiming to identify shared features, clarify their potential relationship and optimize the discharge parameters to generate a rather high pre-plasma density. By separating ECH power from the inductive start-up, the effect of pre-plasma on tokamak start-up can be observed. A dynamic magnetic configuration facilitates the transition of pre-plasma to tokamak plasma. To assess the influence of pre-plasma density on tokamak start-up, two kinds of magnetic field configurations are examined. While the effect of different pre-plasma densities on tokamak start-up is negligible, a significant difference is observed between pure ohmic start-up and start-up with pre-ionization. The studies presented here show evolutionary trends and threshold values needed to optimize ECH pre-ionization and also a feasible way to improve pre-plasma density and a configuration to stabilize pre-plasma for transition. Eventually, these results may contribute to multi-machine research and physics analysis that can assist ITER with its optimal preparation for first plasma operation.

ECH↗
DOE OSTI2019

Stationary Solutions of the Vlasov Equations for a High-Temperature Two-Component Plasma

We consider the first mixed problem for the Vlasov–Poisson equations in infinite cylinder. This problem describes evolution of the distribution density for ions and electrons in a high-temperature plasma in the presence of an outer magnetic field. We construct stationary solutions of the Vlasov–Poisson system of equations with the trivial potential of the self-consistent electric field describing a two-component plasma in an infinite cylinder such that their supports are located at a distance from the boundary of the domain.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

Expansion dynamics and chemistry evolution in ultrafast laser filament produced plasmas

Laser ablation in conjunction with optical emission spectroscopy is a potential non-contact, standoff detection method for all elements in the periodic table and certain isotopes such as radionuclides. Currently, significant development efforts are on-going to use ultrafast laser filaments for remote sensing. The application of filaments is of particular interest in extending the range of stand-off capability associated with elemental and isotopic detection via laser-induced breakdown spectroscopy. In this study, we characterize the expansion dynamics and chemical evolution of filament-produced uranium (U) plasmas. Laser filaments are generated in the laboratory by loosely focusing 35 femtosecond (fs), 6 milli Joule (mJ) pulses in air. Two-dimensional spectrally-integrated and time-resolved imaging was performed to study hydrodynamics and evolution of U atomic and UO molecular emission in filament-produced U plasmas. Our results highlight that filament ablation of U plasmas gives a cylindrical plasma plume morphology with an appearance of plume splitting into slow and fast moving components at later times of its evolution. Emission from the slow-moving region shows no distinct spectral features (i.e. broadband-like) and is contributed in part by nanoparticles generated during ultrafast laser ablation. Additionally, we find U atoms and U oxide molecules (i.e. UO, UxOy) co-exist in the filament produced plasma, which can be attributed to the generation of low-temperature plasma conditions during filament ablation

(140.3440) Laser-induced breakdown, (280.5395) Pla↗
DOE OSTI2025

Biofluid-based staging of Alzheimer’s disease

Recently, conceptual systems for the in vivo staging of Alzheimer’s disease (AD) using fluid biomarkers have been suggested. Thus, it is important to assess whether available fluid biomarkers can successfully stage AD into clinically and biologically relevant categories. In the TRIAD cohort, we explored whether p-tau217, p-tau205 and NTA-tau (biomarkers of early, intermediate and late AD pathology, respectively) have potential for biofluid-based staging in cerebrospinal fluid (CSF; n = 219) and plasma (n = 150), and compared them in a paired CSF and plasma subset (n = 76). Our findings suggest a good concordance between biofluid staging and underlying pathology when classifying amyloid-positivity into three categories based on neurofibrillary pathology: minimal/non-existent (p-tau217 positive), early-to-intermediate (p-tau217 and p-tau205 positivity), and advanced tau tangle deposition (p-tau217, p-tau205 and NTA-tau positive), as indexed by tau-PET. Discordant cases accounted for 4.6% and 13.3% of all CSF and plasma measurements respectively (9.2% and 11.8% in paired samples). Notably, CSF- and plasma-based staging matched one another in 61.7% of the cases, while approximately 32% of the remaining participants were one to three biofluid stages higher in CSF as compared to plasma. Overall, these exploratory results suggest that biofluid staging of AD holds potential for offering valuable insights into underlying AD hallmarks and disease severity. However, its applicability beyond molecular characterization at research settings has yet to be demonstrated.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2023

Ion Channel Laser Based on Direct Laser Acceleration of a Shaped Beam Driver (Final Technical Report)

The main focus of our research was to understand the synergies between an electron bunch and a laser pulse when the two co-propagate through the plasma. We have clearly demonstrated using theoretical and computational modeling that the propagation distance of both the bunch and the laser pulse could be extended. The ability of the combined bunch/pulse system to extend the propagation distance and the size of the plasma bubble enables highly-efficient sources of relativistic electrons. As pointed out by the Plasma Decadal Study, such electron sources can be used for generating extremely bright x-rays for a variety of applications can serve as probes and diagnostics for other plasma experiments: high energy density (HED) sciences, inertial confinement fusion (ICF), and potentially Fusion Materials and Technology (FM&T). Development of advanced diagnostics of plasma-based accelerators is yet another key area identified by recent reports. Even broader security and medical applications of compact accelerator-based radiation sources, such as very high energy electron (VHEE) sources for FLASH radiobiology, have been identified by a recent multi-agency panel. A number of key technical issues were considered and successfully resolved during the course of the grant. Those include: beam loading effect of both the driver and witness bunches on the wake, laser channeling by the bunch, and the direct laser acceleration (DLA) of the driver bunch by the laser pulse. To demonstrate clear synergy, we were able to ascertain that the total energy gain of a witness bunch in the wake of the combined bunch/laser complex is large than the sum of the energy gains in the wake of the laser pulse alone, and the driver bunch alone. We have also demonstrated that not only the energy gain is improved, but the energy spread is not sacrificed. To carry out these simulations, we have to develop a range of in-house computational tools, including a fully-3D code WAND-PIC.

43 PARTICLE ACCELERATORS↗
DOE OSTI2023

Evaluation of ITER divertor shunts as a synthetic diagnostic for detachment control

Reliable diagnostics that measure the detached state of the ITER divertor plasma will be necessary to control heat flux to the divertor targets during steady state, burning plasma operation. This paper conducts an initial exploration into the feasibility of the divertor shunt diagnostic as a lightweight, robust, and real-time detachment sensor. This diagnostic is a set of shunt lead pairs that measure the voltage drop along the divertor cassette body, from which the plasma scrape-off layer (SOL) current is calculated. Using SOLPS-ITER simulations for control-relevant ITER plasma scenarios, the thermoelectric current magnitude along the SOL is shown to decrease significantly with the onset of partial detachment at the outer divertor target. Electromagnetic modelling of a simplified divertor cassette is used to develop a control-oriented inductance-resistance circuit model, from which SOL currents can be calculated from shunt pair voltage measurements. The sensitivity and frequency-response of the resulting system indicates that the diagnostic will accurately measure SOL thermoelectric currents during ITER operation. These currents will be a good measure of the detached state of the divertor plasma, making the divertor shunt diagnostic a potentially extremely valuable and physically robust sensor for real-time detachment control.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗