SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The techniques and results of power pattern measurements of a corrugated horn antenna designed for low sidelobes are reported. The power pattern was measured to levels 90 dB below the main beam maximum in both the E- and H-planes. The measured patterns were found to be in good agreement with predictions from existing theory for the performance of corrugated scalar feeds.
In a front-contact grid pattern for a solar cell there is a trade-off necessary between shadowing loss and excessive power loss due to voltage drop in the metalization itself. If the metalization is too little there may be excessive contact resistance to the underlying semiconductor and insufficient coverage to control losses in the thin front-surface layer of the solar cell. Optimization of grid pattern area and geometry is considered analytically to minimize total losses. Worthwhile performance advantages are shown to be possible, particularly in concentrator systems, if multi-layer grid patterns are used. The current carrying fingers should be approximately square in metal cross section and the main current feedout bars should not only be wider but also thicker than the primary collecting fingers. This is termed multi-level metalization. Effective use of multi-level grid metalization allows much greater concentration-to-loss ratio for a cell of large area and permits good performance from cells of high front-layer sheet resistance.
An electronic heterodyne technique is being investigated for video (i.e., television rate and format) recording of interference patterns. In the heterodyne technique electro-optic modulation is used to introduce a sinusoidal phase shift between the beams of an interferometer. For phase modulation frequencies between 0.1 and 15 MHz an image dissector camera may be used to scan the resulting temporally modulated interference pattern. Heterodyne detection of the camera output is used to selectively record the interference pattern. An advantage of such synchronous recording is that it permits recording of low-contrast fringes in high ambient light conditions. The application of this technique to the recording of holograms is discussed.
Multilayer grid patterns consist of fine closely spaced grid lines overlaid by coarser patterns of wider and thicker grid lines to collect the current from the finer grids with low series voltage drop and low active-layer sheet losses. An analytical approach leads to closed form solutions with simple relationships between the power losses in the active layer, in the grid and shadowing losses for optimum design proportions. The results show that multilayer grids, with line thickness equal to line width, greatly reduce losses in cell efficiency under concentration conditions of high current collection. (AlGa)As-pn GaAs cells of areas 1-25 sq cm and sheet resistance 40 ohms/square are considered. Also the performance of a n/p GaAs cell of dimensions 10 x 10 cm is studied. With optimized grid patterns high efficiencies are predicted for large area cells.
Testing of large scale integrated logic circuits is considered from the point-of-view of automatic test pattern generation. A logic simulator based approach for automatic test pattern generation is taken and is described. The logic model and the timing model used in the simulator are also described. Two methods are presented for generating test patterns from the output of the simulator. Recommendations for future study are also presented.
A historical analysis of all the applicable LANDSAT imagery was conducted on the turbidity patterns of Lake Chicot, located in the southeastern corner of Arkansas. By examining the seasonal and regional turbidity patterns, a record of sediment dynamics and possible disposition can be obtained. Sketches were generated from the suitable imagery, displaying different intensities of brightness observed in bands 5 and 7 of LANDSAT's multispectral scanner data. Differences in and between bands 5 and 7 indicate variances in the levels of surface sediment concentrations. High sediment loads are revealed when distinct patterns appear in the band 7 imagery. Additionally, the upwelled signal is exponential in nature and saturates in band 5 at low wavelengths for large concentrations of suspended solids.
The LANDSAT imagery was historically analyzed to determine the circulation and turbidity patterns of Kerr Lake, located on the Virginia-North Carolina border. By examining the seasonal and regional turbidity and circulation patterns, a record of sediment transport and possible disposition can be obtained. Sketches were generated, displaying different intensities of brightness observed in bands 5 and 7 of LANDSAT's multispectral scanner data. Differences in and between bands 5 and 7 indicate variances in the levels of surface sediment concentrations. High sediment loads are revealed when distinct patterns appear in the band 7 imagery. The upwelled signal is exponential in nature and saturates in band 5 at low wavelengths for large concentrations of suspended solids.
A historical analysis of all the applicable LANDSAT imagery was conducted on the turbidity patterns of Lake Chicot, located in the southeastern corner of Arkansas. By examining the seasonal and regional turbidity patterns, a record of sediment dynamics and possible disposition can be obtained. Sketches were generated from the suitable imagery, displaying different intensities of brightness observed in bands 5 and 7 of LANDSAT's multispectral scanner data. Differences in and between bands 5 and 7 indicate variances in the levels of surface sediment concentrations. High sediment loads are revealed when distinct patterns appear in the band 7 imagery. Additionally, the upwelled signal is exponential in nature and saturates in band 5 at low wavelengths for large concentrations of suspended solids.
As part of the NASA Langley Research Center Storm Hazards Program, 69 thunderstorm pentrations were made in 1980 with an F-106B airplane in order to record direct strike lightning data and the associated flight conditions. Ground based weather radar measurements in conjunction with these penetrations were made by NOAA National Severe Storms Laboratory in Oklahoma and by NASA Wallops Flight Center in Virginia. In 1980, the airplane received 10 direct lightning strikes; in addition, lightning transient data were recorded from 6 nearby flashes. Following each flight, the airplane was thoroughly inspected for evidence of lightning attachment, and the individual lightning attachment points were plotted on isometric projections of the airplane to identify swept flash patterns. This report presents pilot descriptions of the direct strikes to the airplane, shows the strike attachment patterns that were found, and discusses the implications of the patterns with respect to aircraft protection design. The flight conditions are also included. Finally, the lightning strike scenarios for three U.S. Air Force F-106A airplanes which were struck during routine operations are given in the appendix to this paper.
The invention relates to methods for making alminate patterns for a resin matrix composite structural component. A sheet of paper is temporarily adhered to a model of the structrual component. A pen is positioned on the paper with a spindle touching the model surface opposite the pen. The pen and spindle are moved along the path that maintains the aforementioned contacts. The resulting line traced on paper is a model constant-thickness locus and provides a pattern for a single lamination of resin-impregnated fabric. The steps are repeated to make other patterns and each time the steps are repeated the distance between the tracer and the spindle is changed to correspond to the thickness of a lamination.
The analytic solutions to a two-dimensional, shallow-water model of the high-latitude thermosphere are developed. The equations are a linearized representation of the response of the neutral atmosphere to the momentum source due to the plasma convection pattern. The obtained results show how the neutral winds depend on the Pedersen and Hall ion drag coefficients and the horizontal wave number. The response depends on the dimensionless scale as it appears in the product of the Rossby radius of deformation and the wave number. The flow pattern is shifted in local time from the plasma flow pattern by an amount that depends on the average electron density. At the largest scales there is a 180 deg phase shift between the rotational flow components in the E and F regions. The model applies to quiet magnetic conditions and below 200 km of altitude.
This paper presents a flight study of tone radiation patterns from a small turbofan engine and compares results with similar static test stand data and a recently developed radiation theory. An interaction tone was produced by a circumferential array of inlet rods placed just upstream of the fan blades. Overhead and sideline flight directivity patterns showed cut-on of a dominant single mode occurred where predicted and the absence of any other significant circumferential or radial modes. In general, good agreement was found between measured flight and static data, with small differences being attributed to inlet geometry and/or forward speed effects. Good agreement was also obtained between flight data and theory for directivity pattern shape, however, the theory consistently predicted higher values for peak radiation angle over a wide range of frequency.
Modern biodistributional patterns suggest that modes of larval development are a factor in determining the patterns of diversity in benthic invertebrates. Paleozoic brachiopods had diversity patterns suggesting that they possessed both planktotrophic and nonplanktotrophic modes. It is presently hypothesized that the planktotrophic lineages were lost to extinction, largely or entirely during the Permian-Triassic event, and that the failure of the articulate brachiopods to regain their former importance is substantially due to their nonplanktotrophic developmental mode.
This paper is a brief review of recent and ongoing developments in the theory of dendritic pattern formation. A marginal stability hypothesis has achieved some success in predicting dendritic growth rates, but a fully nonlinear dynamic theory of the dendritic growth mechanism has yet to be developed. A possible clue for the construction of such a theory is the existence of a class of one-dimensional models in which a pattern is found to spread into an unstable region by propagating at the slowest stable speed. This mathematical realization of the marginal stability mechanism has led to the development of a boundary layer model which describes localized dynamics of fully two- or three-dimensional solidification fronts and which retains some of the mathematical features of the propagating systems. Preliminary results of numerical calculations using the boundary layer model indicate that it is capable of probing fully nonlinear features of dendritic pattern formation.
A method is presented for generating circularly polarized conical patterns from circular microstrip antennas. These antennas are excited at higher order modes and require different feed arrangements for different mode excitations. It is determined that the peak direction of the conical pattern can be varied over a wide angular range. Modal expansion technique is employed to calculate the radiation patterns of these antennas.
The relationship between the movement time (MT) for accurate and rapid discrete movements of distance A to a target of width W was quantified by Fitts and is given by the equation: MT = a + b log sub 2 (2A/W). This relationship, known as Fitt's Law, received considerable support for many types of movements. It also raises the interesting question: if MT is affected by distance moved and accuracy, then how do the patterns of muscle activation alter? It is suggested that it is unlikely that all movements are initiated by a pulse of constant duration. Instead, it seems that movements are initiated by an agonist burst which is scaled both in the amount of activation and the duration of activation according to either distance, target size, velocity, or a combination of factors. The number of bursts varies considerably and further research is required to establish: (1) which factors affect the pattern of the signal and (2) how different patterns produce movement trajectories.
Spectral vegetation index measurements derived from remotely sensed observations show great promise as a means to improve knowledge of land vegetation patterns. The daily, global observations acquired by the advanced very high resolution radiometer, a sensor on the current series of U.S. National Oceanic and Atmospheric Administration meteorological satellites, may be particularly well suited for global studies of vegetation. Preliminary results from analysis of North American observations, extending from April to November 1982, show that the vegetation index patterns observed correspond to the known seasonality of North American natural and cultivated vegetation. Integration of the observations over the growing season produced measurements that are related to net primary productivity patterns of the major North American natural vegetation formations. Regions of intense cultivation were observed as anomalous areas in the integrated growing season measurements. Significant information on seasonality, annual extent and interannual variability of vegetation photosynthetic activity at continental and global scales can be derived from these satellite observations.
It is pointed out that the boundary layer on a rotating disk is important in stability theory because it provides a particularly simple way to study the important phenomenon of crossflow instability. This type of instability is responsible for early transition on sweptback wings. Mack and Kendall (1983) have studied the wave patterns formed by harmonic point sources in a Blasius boundary layer on the basis that the source uniformly excites all oblique normal modes of the source frequency. The calculation procedure for planar boundary layers was modified to fit the different geometry of the rotating disk and the lack of an axis of symmetry. Calculations were performed of the wave pattern produced by a zero-frequency point source located at the Reynolds number of the artificial roughness element in an experiment conducted by Wilkinson and Malik (1983). The results provided in the present investigation confirm that the experimental wave pattern is a superposition of the complete azimuthal wavenumber spectrum of zero-frequency normal modes with uniform initial amplitude and phase.