Search NASA⌕ Search

SEARCH · Search NASA

Results for “Performance analytics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

Spacecraft attitude impacts on COLD-SAT non-vacuum jacketed LH2 supply tank thermal performance

The Cryogenic On-Orbit Liquid Depot - Storage, Acquisition and Transfer (COLD-SAT) spacecraft will be launched into low earth orbit to perform fluid management experiments on the behavior of subcritical liquid hydrogen (LH2). For determining the optimum on-orbit attitude for the COLD-SAT satellite, a comparative analytical study was performed to determine the thermal impacts of spacecraft attitude on the performance of the COLD-SAT non-vacuum jacketed LH2 supply tank. Tank thermal performance was quantified by total conductive and radiative heat leakage into the pressure vessel due to the absorbed solar, earth albedo and infra-red on-orbit fluxes, and also by the uniformity of the variation of this leakage on the vessel surface area. Geometric and thermal analysis math models were developed for the spacecraft and the tank as part of this analysis, based on their individual thermal/structural designs. Two quasi-inertial spacecraft attitudes were investigated and their effects on the tank performance compared. The results are one of the criteria by which the spacecraft orientation in orbit was selected for the in-house NASA Lewis Research Center design.

Arif, Hugh↗
NASA NTRS1990

Spacecraft attitude impacts on COLD-SAT non-vacuum jacketed LH2 supply tank thermal performance

The Cryogenic On-Orbit Liquid Depot - Storage, Acquisition and Transfer (COLD-SAT) spacecraft will be launched into low earth orbit to perform fluid management experiments on the behavior of subcritical liquid hydrogen (LH2). For determining the optimum on-orbit attitude for the COLD-SAT satellite, a comparative analytical study was performed to determine the thermal impacts of spacecraft attitude on the performance of the COLD-SAT non-vacuum jacketed LH2 supply tank. Tank thermal performance was quantitied by total conductive and radiative heat leakage into the pressure vessel due to the absorbed solar, earth albedo and infra-red on-orbit fluxes, and also by the uniformity of the variation of this leakage on the vessel surface area. Geometric and thermal analysis math models were developed for the spacecraft and the tank as part of this analysis, based on their individual thermal/structural designs. Two quasi-inertial spacecraft attitudes were investigated and their effects on the tank performance compared. The results are one of the criteria by which the spacecraft orientation in orbit was selected for the in-house NASA Lewis Research Center design.

Arif, Hugh↗
NASA NTRS1980

A unified analysis and design procedure for a standardized control module for dc-dc switching regulators

Three basic switching regulators: buck, boost, and buck/boost, employing a multi-loop control module (SCM) were characterized by a common small signal block diagram. Employing the unified model, regulator performances such as stability, audiosusceptibility, output impedance and step load transient are analyzed and key performance indexes are expressed in simple analytical forms. More importantly, the performance characteristics of all three regulators are shown to enjoy common properties due to the unique SCM control scheme which nullifies the positive zero and provides adaptive compensation to the moving poles of the boost and buck/boost converters. This allows a simple unified design procedure to be devised for selecting the key SCM control parameters for an arbitrarily given power stage configuration and parameter values, such that all regulator performance specifications can be met and optimized concurrently in a single design attempt.

Lee, F. C.↗
NASA NTRS1982

Analysis and design of a standardized control module for switching regulators

Three basic switching regulators: buck, boost, and buck/boost, employing a multiloop standardized control module (SCM) were characterized by a common small signal block diagram. Employing the unified model, regulator performances such as stability, audiosusceptibility, output impedance, and step load transient are analyzed and key performance indexes are expressed in simple analytical forms. More importantly, the performance characteristics of all three regulators are shown to enjoy common properties due to the unique SCM control scheme which nullifies the positive zero and provides adaptive compensation to the moving poles of the boost and buck/boost converters. This allows a simple unified design procedure to be devised for selecting the key SCM control parameters for an arbitrarily given power stage configuration and parameter values, such that all regulator performance specifications can be met and optimized concurrently in a single design attempt.

Lee, F. C.↗
NASA NTRSDate not supplied

Define Minimum Safe Operational Volume for Aerial Vehicles in Upper Class E Airspace

This work presents both analytical and simulation studies for defining the minimum safe operational volume needed for aerial vehicles operating in upper Class E airspace. The analytical study is conducted first to investigate factors that affect the minimum safe operational volume, such as position errors, wake/vortex, vehicle maneuverability, communication and surveillance, control/operator response time. A mathematical approach is developed to compute the boundary of the safe operational volume required by the limited aircraft maneuverability and an analytical sensitivity study is then performed with varying parameters. After the analytical study, simulations are then conducted to verify the results from the analytical study. Simulation results will be included in the final paper.

Separation standard, well-clear definition, upper ↗
NASA NTRSDate not supplied

Attitude Ground System: Recent Experiences in Attitude Sensor Calibration and Upcoming Mission Support for Momentum Unloading

A key component of the mission ground system used for supporting NASA Goddard Space Flight Center space missions, known as the Attitude Ground System (AGS), is used to perform operational and analytical support for the spacecraft attitude con-trol system (ACS). The AGS is comprised of a real-time attitude analysis and moni-toring system, and a tool for performing offline analysis of the ACS system using key sensor telemetry collected and stored onboard and transmitted to the mission operations center. The AGS performs numerous functions, including independent ground attitude determination, attitude slew planning and commanding, attitude sensor calibration, and real-time monitoring of the health and safety of the ACS. The AGS is developed in MATLAB using a core library of utility functions called the Multi-Mission Three-Axis Satellite System (MTASS). The MTASS library has been used to support mission operations for over thirty NASA missions starting in the late 1990s. It is customized for each mission to meet specific mission requirements. In this paper we describe recent operational experience using the AGS to support the launch and early orbit (L&EO) phase of the Plankton, Aerosol, Cloud Ocean Ecosys-tem (PACE) and Joint Polar Satellite System (JPSS) missions. Our summary of L&EO support for PACE and JPSS includes ACS sensor calibration of the alignment and scale factors for the Star Trackers, Inertial Reference Unit, and Three-Axis Magnetometers. We will also describe new capabilities for planning and executing reaction wheel momentum unloading for the Roman Space Telescope (RST) During the spacecraft early orbit phase, the AGS is operated in the mission operations center by a team of subject matter experts that also develop and configure the AGS soft-ware. This unique approach, integrating system development and operation in a sin-gle engineering team, provides valuable expertise for quick assessment of ACS per-formance and safety; critical to anomaly resolution and mission success.

Guidance, Navigation, and Control↗
NASA NTRS1995

Testing higher-order Lagrangian perturbation theory against numerical simulations. 2: Hierarchical models

We present results showing an improvement of the accuracy of perturbation theory as applied to cosmological structure formation for a useful range of scales. The Lagrangian theory of gravitational instability of Friedmann-Lemaitre cosmogonies is compared with numerical simulations. We study the dynamics of hierarchical models as a second step. In the first step we analyzed the performance of the Lagrangian schemes for pancake models, the difference being that in the latter models the initial power spectrum is truncated. This work probed the quasi-linear and weakly non-linear regimes. We here explore whether the results found for pancake models carry over to hierarchical models which are evolved deeply into the non-linear regime. We smooth the initial data by using a variety of filter types and filter scales in order to determine the optimal performance of the analytical models, as has been done for the 'Zel'dovich-approximation' - hereafter TZA - in previous work. We find that for spectra with negative power-index the second-order scheme performs considerably better than TZA in terms of statistics which probe the dynamics, and slightly better in terms of low-order statistics like the power-spectrum. However, in contrast to the results found for pancake models, where the higher-order schemes get worse than TZA at late non-linear stages and on small scales, we here find that the second-order model is as robust as TZA, retaining the improvement at later stages and on smaller scales. In view of these results we expect that the second-order truncated Lagrangian model is especially useful for the modelling of standard dark matter models such as Hot-, Cold-, and Mixed-Dark-Matter.

Melott, A. L.↗
NASA NTRS1974

Transonic flutter study of a 50.5 deg cropped-delta wing with two rearward-mounted nacelles

Transonic flutter characteristics of three geometrically similar delta-wing models were experimentally determined in the Langley transonic dynamics tunnel at Mach numbers from about 0.6 to 1.2. The models were designed to be simplified versions of an early supersonic transport wing design. The model was an aspect-ratio-1.28 cropped-delta wing with a leadingedge sweep of 50.5 deg. The flutter characteristics obtained for this wing configuration indicated a minimum flutter-speed index near a Mach number of 0.92 and a transonic compressibility dip amounting to about a 27-percent decrease in the flutter-speed index relative to the value at a Mach number of 0.6. Analytical studies were performed for one wing model at Mach numbers of 0.6, 0.7, 0.8, and 0.9 by using both doublet-lattice and lifting-surface (kernel-function) unsteady aerodynamic theory. A comparison of the analytical and experimental flutter results showed good agreement at all Mach numbers investigated.

Sandford, M. C.↗
NASA NTRS1965

Human Tracking Performance in Uncoupled and Coupled Two-Axis Systems

This report presents tile results of an experimental and analytical study of human performance in uncoupled and coupled control systems. Human pilot performance in single and two-axis systems was mathematically modeled by linear second-order describing functions. Model parameters were determined using model matching techniques. Analysis of the models showed that the amplitude ratio and phase lead of the describing function increased with training indicating an increase in open loop bandwidth. The phase margin also decreased with training. Increasing the plant lag time constant resulted in an increase in the model lead time constant and a decrease in the zero frequency gain. No significant difference was found to exist in the normalized tracking error per axis between the two-axis tasks and the single-axis tasks. However tile model lead time constant was significantly greater in two-axis tracking. Manual tracking of two-axis systems with cross-coupling was studied experimentally and analytically. Approximate methods for modeling two-axis performance were developed and checked using a precise spectral analysis approach. Coupled and uncoupled, symmetrical and asymmetrical two-axis performance was compared. The results show that modeling of cross-coupled systems is feasible and that trained subjects are capable of decoupling the axes of some systems. A methodology study compared the identification performance of continuous, iterative, and extrapolation model matching techniques. An iterative technique employing sensitivity equations for the generation of influence coefficients was found to be the best technique due to its excellent identification accuracy and ease of implementation. Convergence in iterative techniques can be improved substantially by equalizing the parameter adjustment rates and limiting the maximum correction per iteration.

Todosiev, E. P.↗
NASA NTRS1988

Dynamic analysis of multimesh-gear helicopter transmissions

A dynamic analysis of multimesh-gear helicopter transmission systems was performed by correlating analytical simulations with experimental investigations. The two computer programs used in this study, GRDYNMLT and PGT, were developed under NASA/Army sponsorship. Parametric studies of the numerical model with variations on mesh damping ratios, operating speeds, tip-relief tooth modifications, and tooth-spacing errors were performed to investigate the accuracy, application, and limitations of the two computer programs. Although similar levels of dynamic loading were predicted by both programs, the computer code GRDYNMLT was found to be superior and broader in scope. Results from analytical work were also compared with experimental data obtained from the U.S. Army's UH-60A Black Hawk 2240-kW (3000-hp) class, twin-engine helicopter transmission tested at the NASA Lewis Research Center. Good correlation in gear stresses was obtained between the analytical model simulated by GRDYNMLT and the experimental measurements. More realistic mesh damping can be predicted through experimental data correlation.

Choy, Fred K.↗
NASA NTRS1984

Experimental and analytical investigations into airfoil icing

Methods of analyzing and measuring experimentally the accretion of ice and its effect on airfoil aerodynamic performance are presented. An analytical method for predicting water droplet impingement has been developed and shows the influence of airfoil leading edge radius and thickness on droplet impingement to be significant. Rime ice accretions are predicted including time dependent effects and these shapes compare well to experiment. Scaling water droplet impingement and rime ice accretion is discussed. Predictions of the effect of rime ice on airfoil performance are developed based on empirical and analytical methods. Techniques for measuring and simulating ice accretions for wind tunnel tests compare well to actual iced airfoil aerodynamic data. Data showing the effect of ice on measured airfoil performance using real and simulated ice are presented.

Bragg, M. B.↗
NASA NTRS1986

Stirling engine external heat system design with heat pipe heater

This final report presents the conceptual design of a liquid fueled external heating system (EHS) and the preliminary design of a heat pipe heater for the STM-4120 Stirling cycle engine, to meet the Air Force mobile electric power (MEP) requirement for units in the range of 20 to 60 kW. The EHS design had the following constraints: (1) Packaging requirements limited the overall system dimensions to about 330 mm x 250 mm x 100 mm; (2) Heat flux to the sodium heat pipe evaporator was limited to an average of 100 kW/m and a maximum of 550 kW/m based on previous experience; and (3) The heat pipe operating temperature was specified to be 800 C based on heat input requirements of the STM4-120. An analysis code was developed to optimize the EHS performance parameters and an analytical development of the sodium heat pipe heater was performed; both are presented and discussed. In addition, construction techniques were evaluated and scale model heat pipe testing performed.

Godett, Ted M.↗
NASA NTRS1993

TSS tether cable meteoroid/orbital debris damage analysis

This report summarizes the damage analyses performed on the tether cable used for the tethered satellite system (TSS), for the damage that could be caused by meteoroid or orbital debris impacts. The TSS consists of a tethered satellite deployer and a tethered satellite. The analytical studies were performed at Marshall Space Flight Center (MSFC) with the results from the following tests: (1) hypervelocity impact tests to determine the 'critical' meteoroid particle diameter, i.e., the maximum size of a meteoroid particle which can impact the tether cable without causing 'failure'; (2) electrical resistance tests on the damaged and undamaged tether cable to determine if degradation of current flow occurred through the damaged tether cables; and (3) tensile load tests to verify the load carrying capability of the damaged tether cables. Finally, the HULL hydrodynamic computer code was used to simulate the hypervelocity impact of the tether cable by particles at velocities higher than can be tested, to determine the extent of the expected tether damage.

Hayashida, K. B.↗
NASA NTRS1973

Shuttle active thermal control system development testing. Volume 3: Modular radiator system test data correlation with thermal model

Results are presented of an analysis which compares the performance predictions of a thermal model of a multi-panel modular radiator system with thermal vacuum test data. Comparisons between measured and predicted individual panel outlet temperatures and pressure drops and system outlet temperatures have been made over the full range of heat loads, environments and plumbing arrangements expected for the shuttle radiators. Both two sided and one sided radiation have been included. The model predictions show excellent agreement with the test data for the maximum design conditions of high load and hot environment. Predictions under minimum design conditions of low load-cold environments indicate good agreement with the measured data, but evaluation of low load predictions should consider the possibility of parallel flow instabilities due to main system freezing. Performance predictions under intermediate conditions in which the majority of the flow is not in either the main or prime system are adequate although model improvements in this area may be desired. The primary modeling objective of providing an analytical technique for performance predictions of a multi-panel radiator system under the design conditions has been met.

Phillips, M. A.↗
NASA NTRSDate not supplied

Testing the Effectiveness of Integrated Plume Shield for a Hall Thruster

Hall thrusters have been shown to exhibit side plumes with varying degree of erosive power. This article presents the concept of the integrated plume shield for the purpose of mitigating the erosive power of said side plume. A test was conducted on a low-power Hall thruster with and without integrated plume shield and the effect on thruster performance and plume characteristics were measured. Collected data shows that the thruster performed identically to within uncertainty in terms of thrust, specific impulse, and discharge oscillation characteristics. Plume measurements showed up to a 48% reduction in ion current density when averaging over 80° to 105° from the firing axis. A brief analytical study was performed to determine the advantages and disadvantages of using integrated plume shield as opposed to using spacecraft surface covering and placing thrusters on booms. The integrated plume shield was found to provide varying level of advantages in mass, design restrictions, and complexity, which are likely to lead to major cost savings in the long term.

Electric Propulsion↗
NASA NTRS1979

Performance of a capillary propellant management device with hydrazine

The propellant management device that was successfully used in the Viking Orbiter spacecraft was selected for the main propulsion system of the Teleoperator Retrieval System (TRS). Due to differences in the missions and different propellants, the operation of this sheet metal vane device required reverification for the TRS application. An analytical investigation was performed considering the adverse acceleration environment and the high contract angle of the hydrazine propellant. Drop tower tests demonstrated that the device would provide propellant acquisition while the TRS was docked with Skylab, but its operation would have to be supplemented through propellant settling when free-flying.

Tegart, J. R.↗