SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Utilize the unique characteristics of photons across different regions of the electromagnetic spectrum to probe the optical and electronic properties of chemical systems, materials and devices for energy conversion technologies.
Ordering vacancies in hybrid Sn(II) halide semiconductors provides a strategy for preventing uncontrolled oxidation and formation of mobile holes. In this study, we report the structure and optical and electronic properties of (NH 3 (CH 2 ) 7 NH 3 ) 2 Sn 3 I 10 , a vacancy-ordered perovskite derivative with three-dimensional inorganic connectivity. The crystal structure resembles that of a Dion–Jacobson layered perovskite derivative, but with [SnI 5 ] square pyramids bridging the layers. UV–vis diffuse reflectance spectroscopy reveals a sharp onset of light absorption at 1.86(1) eV with the photoluminescence emission maximum at 1.90(1) eV. However, the maximum excitation occurs from 3.42 to 3.81 eV (325 to 370 nm), revealing a significant Stokes shift of 1.3 eV. The electronic properties determined from dark and time-resolved microwave conductivity measurements reveal a minimum carrier mobility of 4.3 × 10 –2 cm 2 V –1 s –1 and a maximum carrier density of 5.96 × 10 16 cm –3 , a uniquely low value for a hybrid Sn(II) halide semiconductor. The transport behavior in combination with first-principles calculations of the electronic band structure and dielectric permittivity suggest polaron-mediated electronic transport, yet the photogenerated carriers have a fast and fluence-dependent nonradiative recombination rate, suggestive of localized “defect-like” states at the band edge. The observed photoluminescence is most consistent with single-ion-like behavior of an asymmetric Sn(II) environment. Together, these results suggest that defect ordering presents a strategy for the reduction of mobile charge carriers at equilibrium.
Quasi-2D perovskites have been pivotal in recent efforts to stabilize perovskite solar cells. Despite the stability boost provided when these materials are introduced in perovskite solar cells, little is known about the intrinsic light and environmental stability of quasi-2D perovskites. In this study, we characterize the photostability of exfoliated quasi-2D perovskite single crystals in air using photoluminescence, infrared, X-ray fluorescence, and energydispersive X-ray spectroscopy. Photoexcitation leads to severe material loss with oxygen as a prerequisite for material breakdown. The effect can be traced to the formation of reactive oxygen species, as demonstrated by increases in the photostability under oxygen-free conditions. We show the effect of combined passivation steps, showcasing the stability enhancement offered by 2D-capping layers in combination with an oxygen-free atmosphere. Our results reveal that the stability of illuminated quasi-2D perovskites depends critically on oxygen exposure, highlighting the importance of oxygen-blocking passivation strategies for stable 2D perovskite-based devices.
The inherent atomistic precision of synthetic chemistry enables bottom-up structural control over quantum bits, or qubits, for quantum technologies. Tuning paramagnetic molecular qubits that feature optical-spin initialization and readout is a crucial step toward designing bespoke qubits for applications in quantum sensing, networking, and computing. In this work, we demonstrate that the electronic structure that enables optical-spin initialization and readout for S = 1, Cr(aryl) 4 , where aryl = 2,4-dimethylphenyl (1), o-tolyl (2), and 2,3-dimethylphenyl (3), is readily translated into Cr(alkyl) 4 compounds, where alkyl = 2,2,2-triphenylethyl (4), (trimethylsilyl)methyl (5), and cyclohexyl (6). The small ground state zero field splitting values (<5 GHz) for 1–6 allowed for coherent spin manipulation at X-band microwave frequency, enabling temperature-, concentration-, and orientation-dependent investigations of the spin dynamics. Electronic absorption and emission spectroscopy confirmed the desired electronic structures for 4–6, which exhibit photoluminescence from 897 to 923 nm, while theoretical calculations elucidated the varied bonding interactions of the aryl and alkyl Cr 4+ compounds. The combined experimental and theoretical comparison of Cr(aryl) 4 and Cr(alkyl) 4 systems illustrates the impact of the ligand field on both the ground state spin structure and excited state manifold, laying the groundwork for the design of structurally precise optically addressable molecular qubits.
An octa-hydrated curium compound [Cm(H 2 O) 8 ](Hdtp)(dtp)·H 2 O (Cm1,H 2 dtp = 2,3-di(tetrazol-5-yl)pyrazine) along with its lanthanide analogues [Ln(H 2 O) 8 ](Hdtp)-(dtp)·H 2 O (Ln1, Ln 3+ = La 3+ –Nd 3+ , Sm 3+ –Lu 3+ ) were synthesized and characterized using single crystal X-ray diffraction and spectroscopic methods. Bond length analysis of VIII Cm(III)–OH 2 (where VIII refers to the coordination number) was compared to VIII Ln(III)–OH 2 (Ln 3+ = Nd 3+ and Sm 3+ ), indicating similar VIII M(III)–OH 2 bond lengths owing to the similar eight-coordinate ionic radii of these VIII M(III) cations. Owing to the reduced coordination number, the VIII Cm(III)–OH 2 bond lengths were shorter than previously reported IX Cm(III)–OH 2 bonds in [Cm(H 2 O) 9 ](CF 3 SO 3 ) 3 . The octa-aquo complexes were also characterized by solid-state UV–vis–NIR spectroscopy in addition to variable-temperature and variable-pressure photoluminescence. Variable-pressure absorption spectra of Cm1 were compared with Ln1 and show that the Cm(III) f → f transitions have a stronger dependence on pressure than that observed in Ln1 (Ln 3+ = Nd 3+ and Sm 3+ ). The experimental and computational analyses reveal that the monotonic decrease in the computed energy difference between the ground state and the first excited state corresponds to the observed red shift of the photoluminescence peak. This is accompanied by a gradual reduction in the average Cm(III)–OH 2 bond length and a delocalization of spin densities, alongside an intensified interaction involving the 5f orbitals under increasing pressure. Furthermore, these changes accommodate the new geometry and collectively modify the energy landscape, resulting in peak broadening and quenching.
We investigate the unexpected high-energy electroluminescence (EL) peaks observed in long-wavelength InGaN light-emitting diodes (LEDs) with ground state emission peaks between ~495 and 685 nm by studying the EL spectra of LEDs with varying quantum well (QW) thicknesses and indium compositions. In addition to the ground state emission, two high-energy emission peaks were observed in the LEDs with thick QWs and high indium compositions. The less energetic high-energy emission peak (2.4–2.6 eV) is attributed to the optical transitions involving excited states. Factors influencing the excited state transitions, such as the QW thickness and indium compositions, were also examined by simulations to better understand the occurrence of these transitions. The more energetic high-energy emission peak (2.8–3.1 eV) originates from V-defect sidewalls and was verified through micro-photoluminescence measurements. Identification of the high-energy emission peaks is essential as it enables targeted epitaxial or growth optimizations to minimize or eliminate these undesirable emission peaks. In conclusion, this work demonstrates the importance of using thin QWs to suppress the unwanted high-energy emissions due to excited state transitions and V-defect sidewalls for long-wavelength InGaN LEDs.
Lead-free halide double perovskites (HDPs) have become attractive materials for optoelectronic applications owing to their nontoxicity, structural stability, and germane photoelectric properties. In this work, we report the synthesis of high-quality In-alloyed Cs 2 AgIn x Bi (1−x) Cl 6 nanocrystals (NCs) using the antisolvent recrystallization method and comprehensively investigate the effects of In alloying on the structural, morphological, optoelectronic, and temperature-dependent photoluminescence (TDPL) properties using the state-of-the-art experimental and computational tools. Both XRD and Raman spectroscopy analyses confirmed the synthesis of highly crystalline Cs 2 AgIn x Bi (1−x) Cl 6 materials, which exhibited cubic morphology, as confirmed by TEM analysis. Room-temperature photoluminescence (PL) measurements revealed a drastic increase in the intensity above 75% In concentration with dual emission, whereas the time-resolved PL (TR-PL) results show an increase in the average lifetime values with an increase in In content, suggesting that the materials have excellent optical properties and hence are suitable candidates for optoelectronics. The TDPL measurements revealed the smallest Huang–Rhys factor (18.6) for the Cs 2 AgIn x Bi (1−x) Cl 6 (x = 0.9) sample, indicating weak exciton–phonon coupling in this composition. When deployed in the fabrication of a photodetector device, the Cs 2 AgIn x Bi (1−x) Cl 6 (x = 0.9) sample exhibited significantly enhanced photoresponsivity and a faster response time, confirming its potential for photodetector applications. Complementary DFT calculations showed that In alloying modifies the band structure of Cs 2 AgIn x Bi (1−x) Cl 6 . Our results provide valuable insights for designing multifunctional Cs 2 AgIn x Bi (1−x) Cl 6 -based materials for next-generation energy and optoelectronic devices.
The effects of pressure on single crystals of Cr-doped gallium oxide (β-Ga 2 O 3 :Cr 3+ ) and aluminum gallium oxide [(Al 0.1 Ga 0.9 ) 2 O 3 ] were examined by measuring the wavelength shift in the spectral R lines. Photoluminescence (PL) spectra of these materials were collected from samples in diamond anvil cells at pressures up to 9 GPa. The β-Ga 2 O 3 :Cr 3+ R lines were found to shift linearly under hydrostatic pressure. The (Al 0.1 Ga 0.9 ) 2 O 3 R lines also show a linear shift but the R 1 line shifted less than for β-Ga 2 O 3 :Cr 3+ . The ratio of R 2 to R 1 peak areas vs pressure is dominated by nonradiative recombination. X-ray diffraction measurements of (Al 0.1 Ga 0.9 ) 2 O 3 indicate that its equation of state is similar to that of β-Ga 2 O 3 . β-Ga 2 O 3 :Cr 3+ was examined under non-hydrostatic conditions by using mineral oil as a pressure transmitting medium. Similar to the case in ruby, the R 1 line is much more sensitive to non-hydrostatic stress than R 2 . Spatially resolved PL of a sample at 8 GPa in mineral oil showed significant variations in the R 1 emission wavelength. Furthermore, these results suggest that the R 1 line can serve as a sensitive probe of alloy composition and non-hydrostatic stress, while the R 2 line is insensitive to these perturbations.
There has been much effort to improve excited-state lifetimes in photosensitizers based on earth-abundant first-row transition metals. Copper(I) complexes have gained significant attention in this field, and in most cases, sterically driven approaches are used to optimize their lifetimes. This study presents a series of three-coordinate copper(I) complexes (Cu1–Cu3) where the excited-state lifetime is extended by triplet–triplet energy transfer. The heteroleptic compounds feature a cyclohexyl-substituted β-diketiminate (CyNacNac Me ) paired with aryl isocyanide ligands, giving the general formula Cu(CyNacNac Me )(CN-Ar) (CN-dmp = 2,6-dimethylphenyl isocyanide for Cu1; CN-pyr = 1-pyrenyl isocyanide for Cu2; CN-dmp-pyr = 2,6-dimethyl-4-(1-pyrenyl)phenyl isocyanide for Cu3). The nature, energies, and dynamics of the low-energy triplet excited states are assessed with a combination of photoluminescence measurements at room temperature and 77 K, ultrafast transient absorption (UFTA) spectroscopy, and DFT calculations. The complexes with the pyrene-decorated isocyanides (Cu2 and Cu3) exhibit extended excited-state lifetimes resulting from triplet–triplet energy transfer (TTET) between the short-lived charge-transfer excited state ( 3 CT) and the long-lived pyrene-centered triplet state ( 3 pyr). This TTET process is irreversible in Cu3, producing exclusively the 3 pyr state, and in Cu2, the 3 CT and 3 pyr states are nearly isoenergetic, enabling reversible TTET and long-lived 3 CT luminescence. The improved photophysical properties in Cu2 and Cu3 result in improvements in activity for both photocatalytic stilbene E/Z isomerization via triplet energy transfer and photoredox transformations involving hydrodebromination and C–O bond activation. Furthermore, these results illustrate that the extended excited-state lifetimes achieved through TTET result in newly conceived photosynthetically relevant earth-abundant transition metal complexes.
While valleys (energy extrema) are present in all band structures of solids, their preeminent role in determining exciton resonances and dynamics in atomically thin transition metal dichalcogenides (TMDC) is unique. Using two-dimensional coherent electronic spectroscopy, we find that exciton decoherence occurs on a much faster timescale in MoSe 2 bilayers than that in the monolayers. We further identify two population relaxation channels in the bilayer, a coherent and an incoherent one. Our microscopic model reveals that phonon-emission processes facilitate scattering events from the K valley to other lower-energy Γ and Λ valleys in the bilayer. Our combined experimental and theoretical studies unequivocally establish different microscopic mechanisms that determine exciton quantum dynamics in TMDC monolayers and bilayers. Understanding exciton quantum dynamics provides critical guidance to the manipulation of spin-valley degrees of freedom in TMDC bilayers.
We use hyperspectral photoluminescence microscopy to study compositional heterogeneity and its influence on the stability of mixed-cation (formamindinium (FA) and cesium) FA 1-x Cs x Pb(I 0.9 Br 0.1 ) 3 lead halide perovskites with different Cs contents. We observe substantial microscale heterogeneity in the photoluminescence. By correlating photoluminescence maps with time-of-flight secondary ion mass spectrometry (ToF-SIMS) imaging, we show that the redder-photoluminescence regions of the perovskite film are associated with Cs-rich compositions. X-ray diffraction measurement and confocal Raman spectroscopy provide evidence for the presence of d-phase CsPbI x Br 3-x in these regions. Photo-aging tests show that these Cs-rich clusters undergo faster photoluminescence decay than the rest of the film. These observations highlight the importance of local heterogeneities and their influence on the stability of halide perovskite semiconductors being studied for optoelectronics.
Semiconductor–metal heterostructures such as CsPbBr 3 –Au are useful in photocatalysis. When Au nanoparticles are deposited on the CsPbBr 3 nanocrystal surface, they efficiently quench the photoluminescence of the semiconductor. This process has been studied by femtosecond transient absorption spectroscopy measurements, which indicate that electron transfer to the Au nanoparticles occurs from both hot and relaxed electrons in the conduction band of CsPbBr 3 . The electron transfer rate constant is much larger for the hot electrons compared to the relaxed electrons. Under steady state photoirradiation of CsPbBr 3 –Au heterostructure, the photogenerated electrons from the excited CsPbBr 3 nanocrystals continue to charge the Au nanoparticles. After sufficient irradiation, the gold nanoparticles dissociate from the CsPbBr 3 surface and aggregate into larger size gold nanoparticles. The expulsion of gold nanoparticles restores the original luminescence behavior of CsPbBr 3 nanocrystals. The spectroscopic and morphological studies provide insight into the expulsion of gold nanoparticles in photoirradiated CsPbBr 3 –Au heterostructures.
Two dimensional van der Waals materials have attracted attention due to their unique properties that arise in the monolayer versus bulk limits. Monolayer MoS 2 has been at the forefront of 2D materials due to its broad applicability in catalysis, photovoltaics, and spintronics. To realize the capabilities of MoS 2 enabled technology, it is necessary to engineer interfaces where charge carriers can be funneled toward or away from the surface. Molecular systems are a versatile strategy to enable this. Ion-linked molecular architectures have been used previously to circumvent difficult and taxing synthetic methods. Here, we demonstrate the growth of metal ion-linked bilayers (ILBs) on monolayer MoS 2 consisting of a first layer spacer (4-mercaptobenzoic acid, MBA) with a Zn(II) ion linked to a fluorophore (BODIPY). Using a combination of Atomic Force Microscopy and Raman spectroscopy, we resolved intrinsic S-vacancies in the MoS 2 lattice via S–H bond breaking of MBA. X-ray Photoelectron Spectroscopy confirmed that Zn(II) acetate can coordinate to carboxylate groups on MBA. Furthermore, with photoluminescence microscopy, we determined that BODIPY emission is observable only in the presence of a metal ion, confirming the growth of a multimolecular ion-linked supramolecular assembly on MoS 2 .
Our knowledge of the electromagnetic fields that power modern nanoscale optical measurements, including (non)linear tip-enhanced Raman and photoluminescence, chiefly stems from numerical simulations. Aside from idealized in silico vs heterogeneous (nano)structures in the laboratory, challenges in quantitative descriptions of nanoscale light–matter interactions more generally stem from the very nature of the problem, which lies at the interface of classical and quantum theories. This is particularly the case in ultrahigh spatial resolution measurements that are sensitive to local optical field variations that take place on subnanometer length scales. Here this work approaches this challenge through extinction-based spectral nanoimaging experiments. We demonstrate <1 nm spatial resolution in hyperspectral extinction measurements that track spatially varying plasmon resonances. We describe the principles behind our experiments and highlight more general implications of our observations.
Abstract Nanocolloids that are cumulatively referred to as nanocarbons, attracted significant attention during the last decade because of facile synthesis methods, water solubility, tunable photoluminescence, easy surface modification, and high biocompatibility. Among the latest development in this reserach area are chiral nanocarbons exemplified by chiral carbon dots (CDots). They are expected to have applications in sensing, catalysis, imaging, and nanomedicine. However, the current methods of CDots synthesis show often contradictory chemical/optical properties and structural information that required a systematic study with careful structural evaluation. Here, we investigate and optimize chiroptical activity and photoluminescence of L‐ and D‐ CDots obtained by hydrothermal carbonization of L‐ and D‐ cysteine, respectively. Nuclear magnetic resonance spectroscopy demonstrates that they are formed via gradual dehydrogenation and condensation reactions of the starting amino acid leading to particles with a wide spectrum of functional groups including aromatic cycles. We found that the chiroptical activity of CDots has an inverse correlation with the synthesis duration and temperature, whereas the photoluminescence intensity has a direct one, which is associated with degree of carbonization. Also, our studies show that the hydrothermal synthesis of cysteine in the presence of boric acid leads to the formation of CDots rather than boron nitride nanoparticles as was previously proposed in several reports. These results can be used to design chiral carbon‐based nanoparticles with optimal chemical, chiroptical, and photoluminescent properties.
Lead halide perovskite nanocrystals demonstrate efficient up-conversion, although the precise mechanism remains a subject of active research. This study utilizes steady-state and time-resolved spectroscopy methods to unravel the mechanism driving the up-conversion process in CsPbBr 3 nanocrystals. Employing above- and below-gap photoluminescence measurements, we extract a distinct phonon mode with an energy of ~7 meV and identify the Pb-Br-Pb bending mode as the phonon involved in the up-conversion process. This result was corroborated by Raman spectroscopy. We confirm an up-conversion efficiency reaching up to 75%. Transient absorption measurements under conditions of sub-gap excitation also unexpectedly reveal coherent phonons for the subset of nanocrystals undergoing up-conversion. This coherence implies that the up-conversion and subsequent relaxation is accompanied by a synchronized and phased lattice motion. This study reveals that efficient up-conversion in CsPbBr 3 nanocrystals is powered by a unique interplay between the soft lattice structure, phonons, and excited states dynamics.
Reported here is the synthesis, crystal structure, and solid-state characterization of a new americium containing metal–organic framework (MOF), [Am(C 9 H 3 O 6 )(H 2 O)], MOF-76(Am). This material is constructed from Am 3+ metal centers and 1,3,5-tricarboxylic acid (BTC) ligands, forming a porous three-dimensional framework that is isostructural with several known trivalent lanthanide (Ln) analogs (e.g., Ce, Nd, and Sm–Lu). The Am 3+ ions have seven coordinates and assume a distorted, capped trigonal prismatic geometry with C1 symmetry. The Am 3+ –O bonds were studied via infrared spectroscopy and compared to several MOF-76(Ln) analogs, where Ln = Nd 3+ , Eu 3+ , Tb 3+ , and Ho 3+ . The results show that the strength of the ligand carboxylate stretching and bending modes increase with Nd 3+ < Eu 3+ < Am 3+ < Tb 3+ < Ho 3+ , suggesting the metal–oxygen bonds are predominantly ionic. Optical absorbance spectroscopy measurements reveal strong f–f transitions; some exhibit pronounced crystal field splitting. The photoluminescence spectrum contains weak Am 3+ -based emission that is achieved through direct and indirect metal center excitation. The weak emissive behavior is somewhat surprising given that ligand-to-metal resonance energy transfer is efficient in the isoelectronic Eu 3+ (4f 6 ) and related Tb 3+ (4f 8 ) analogs. The optical properties were explored further within a series of heterometallic MOF-76(Tb 1–x Am x ) (x = 0.8, 0.2, and 0.1) samples, and the results reveal enhanced Am 3+ photoluminescence.