Search NASA⌕ Search

SEARCH · Search NASA

Results for “Potential Fields”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

On the question of instabilities upstream of cylindrical bodies

In an attempt to understand the unsteady vortical phenomena in perturbed stagnation regions of cylindrical bodies, a critical review of the theoretical and experimental evidence was made. Current theory is revealed to be incomplete, incorrect, or inapplicable to the phenomena observed experimentally. The formalistic approach via the principle of exchange of instabilities should most likely be replaced by a forced-disturbance approach. Also, many false conclusions were reached by ignoring that treatment of the base and perturbed flows in Hiemenz coordinate eta is asymptotic in nature. Almost surely the techniques of matched asymptotic expansions are expected to be used to capture correctly the diffusive and vorticity amplifying processes of the disturbances regarding the mean-flow boundary layer and outer potential field as eta and y/diameter approach infinity. The serious uncertainties in the experiments are discussed in detail.

Morkovin, M. V.↗

Reducing the error of geoid undulation computations by modifying Stokes' function

The truncation theory as it pertains to the calculation of geoid undulations based on Stokes' integral, but from limited gravity data, is reexamined. Specifically, the improved procedures of Molodenskii et al. are shown through numerical investigations to yield substantially smaller errors than the conventional method that is often applied in practice. In this improved method, as well as in a simpler alternative to the conventional approach, the Stokes' kernel is suitably modified in order to accelerate the rate of convergence of the error series. These modified methods, however, effect a reduction in the error only if a set of low-degree potential harmonic coefficients is utilized in the computation. Consider, for example, the situation in which gravity anomalies are given in a cap of radius 10 deg and the GEM 9 (20,20) potential field is used. Then, typically, the error in the computed undulation (aside from the spherical approximation and errors in the gravity anomaly data) according to the conventional truncation theory is 1.09 m; with Meissl's modification it reduces to 0.41m, while Molodenskii's improved method gives 0.45 m. A further alteration of Molodenskii's method is developed and yields an RMS error of 0.33 m. These values reflect the effect of the truncation, as well as the errors in the GEM 9 harmonic coefficients. The considerable improvement, suggested by these results, of the modified methods over the conventional procedure is verified with actual gravity anomaly data in two oceanic regions, where the GEOS-3 altimeter geoid serves as the basis for comparison. The optimal method of truncation, investigated by Colombo, is extremely ill-conditioned. It is shown that with no corresponding regularization, this procedure is inapplicable.

Jekeli, C.↗

Fan noise caused by the ingestion of anisotropic turbulence - A model based on axisymmetric turbulence theory

An analytical model of fan noise caused by inflow turbulence, a generalization of earlier work by Mani, is presented. Axisymmetric turbulence theory is used to develop a statistical representation of the inflow turbulence valid for a wide range of turbulence properties. Both the dipole source due to rotor blade unsteady forces and the quadrupole source resulting from the interaction of the turbulence with the rotor potential field are considered. The effects of variations in turbulence properties and fan operating conditions are evaluated. For turbulence axial integral length scales much larger than the blade spacing, the spectrum is shown to consist of sharp peaks at the blade passing frequency and its harmonics, with negligible broadband content. The analysis can then be simplified considerably and the total sound power contained within each spectrum peak becomes independent of axial length scale, while the width of the peak is inversely proportional to this parameter. Large axial length scales are characteristic of static fan test facilities, where the transverse contraction of the inlet flow produces highly anisotropic turbulence. In this situation, the rotor/turbulence interaction noise is mainly caused by the transverse component of turbulent velocity.

Kerschen, E. J.↗

A method of defining topographic datums of planetary bodies

Since no known planetary bodies in the solar system other than the earth have large bodies of water, a topographical datum other than a sea-level reference must be used as a zero-elevation reference surface. The present paper discusses the definition of the topographic datums of Mars and the moon in terms of a gravity-level surface. Planetary gravitational field potentials were represented by a spherical harmonic expansion in terms of gravity coefficients measured by planetary orbiters, and the topographical datum was taken as the sum of an arbitrarily selected radius of the mean sphere and the radial deviation from the mean sphere. The datum defined for Mars on the basis of Mariner 9 data can be approximated as a triaxial ellipsoid with semimajor axes of 3394.6 and 3393.3 km and semiminor axis of 3376.3 km, based on a mean radius of 3382.9 km. For the moon, Lunar Orbiter IV tracking and ranging data give a datum approximated by a triaxial figure with semimajor axes 1738.30 and 1738.18 km and semiminor axis 1737.65 km, based on a mean radius of 1738 km. A topographic datum of Venus is also planned based on Pioneer-Venus gravity data.

Wu, S. S. C.↗

Synthesis of regional crust and upper-mantle structure from seismic and gravity data

Available seismic and ground based gravity data are combined to infer the three dimensional crust and upper mantle structure in selected regions. This synthesis and interpretation proceeds from large-scale average models suitable for early comparison with high-altitude satellite potential field data to more detailed delineation of structural boundaries and other variations that may be significant in natural resource assessment. Seismic and ground based gravity data are the primary focal point, but other relevant information (e.g. magnetic field, heat flow, Landsat imagery, geodetic leveling, and natural resources maps) is used to constrain the structure inferred and to assist in defining structural domains and boundaries. The seismic data consists of regional refraction lines, limited reflection coverage, surface wave dispersion, teleseismic P and S wave delay times, anelastic absorption, and regional seismicity patterns. The gravity data base consists of available point gravity determinations for the areas considered.

Alexander, S. S.↗

Structure of the Saint Francois Mountains and surrounding lead belt, S.E. Missouri: Inference from thermal IR and other data sets

Progress in the preparation of manuscripts on the discovery of a Precambrian rift running NW-SE through Missouri as seen in free air and Bouguer gravity anomalies and in HCMM data, and on digital image processing of potential field and topographic data on the rift is reported. Copies of the papers are attached. Contrast-enhanced HCMM images that have been transformed to Mercator projections are presented. Shaded relief map overlays of thermal and apparent thermal inertia images used as part of a masers thesis examining correlations between HCMM data products, linears, and geologic units are presented. Progress in examination of the difference in information content of daytime infrared, night time infrared, albedo, and thermal inertia images and their application to he identification of linears not directly controlled by topography is reported. Thermal infrared and albedo data were coded as hue, saturation and brightness values to generate a color display, which is included.

Arvidson, R. E.↗

Effects of vane/blade ratio and spacing on fan noise

The effects of vane/blade ratio and spacing on fan noise are investigated to develop a fan noise prediction scheme which is calibrated against experimental data. A 44 blade, 0.504 diameter fan is used to demonstrate the production of fan noise data free from excess noise caused by rotor turbulence interaction. Two stator sets consisting of a cut-off set with 86 vanes, and a cut-on set of 48 vanes are used, with a total range of spacing from 0.5 to 2.3 rotor chords. The model includes viscous wake interaction noise and the potential field interactions of both the rotor and stator. A free-field acoustic environment is achieved by covering the walls, ceiling and floor with 0.7 m polyurethane foam wedges, providing less than + or - 1 dB standing wave ratio at 200 Hz. Only a 3 dB drop in tone level occurs as the spacing is increased from 0.5 to 2.3 rotor chords, and results indicate that the rotor wakes impinging on the stator vanes are the principal noise source for subsonic rotor speeds.

Kantola, R. A.↗

Statics of wrinkling films

An analytical investigation of the equilibrium of wrinkling films is conducted. Zak (1979) has shown that wrinkling occurs in connection with the instability of a smooth film having no resistance to bending in the case of compression. The governing equation for the equilibrium of a film with possible regions of wrinkling is considered. The introduction of fictitious stress reduces the governing equation to a form which formally coincides with the governing equation for a string. Equilibrium conditions in the case of an absence of external forces are explored, taking into account the stretching of a semispherical film, the torsion of a convex film of revolution, and stress singularities. A study is conducted of the equilibrium under conditions in which external forces normal to the surface of a film are present. Attention is also given to the equilibrium in a potential field.

Zak, M.↗

Numerical optimization techniques for bound circulation distribution for minimum induced drag of Nonplanar wings: Computer program documentation

A two dimensional advanced panel far-field potential flow model of the undistorted, interacting wakes of multiple lifting surfaces was developed which allows the determination of the spanwise bound circulation distribution required for minimum induced drag. This model was implemented in a FORTRAN computer program, the use of which is documented in this report. The nonplanar wakes are broken up into variable sized, flat panels, as chosen by the user. The wake vortex sheet strength is assumed to vary linearly over each of these panels, resulting in a quadratic variation of bound circulation. Panels are infinite in the streamwise direction. The theory is briefly summarized herein; sample results are given for multiple, nonplanar, lifting surfaces, and the use of the computer program is detailed in the appendixes.

Kuhlman, J. M.↗

Structure of the heliospheric current sheet in the early portion of sunspot cycle 21

The structure of the heliospheric current sheet on a spherical source surface of radius 2.35 solar radii has been computed via the use of a potential field model during the first year and a half after the last sunspot minimum. The solar polar magnetic field that is not fully observed in conventional magnetograph scans was included in the computation. The computed heliospheric current sheet had a quasi-stationary structure consisting of two northward and two southward maxima in latitude per solar rotation. The extent in latitude slowly increased from about 15 deg near the start of the interval to about 45 deg near the end. The magnetic field polarity (away from the sun or toward the sun) at the subterrestrial latitude on the source surface agreed with the interplanetary magnetic field polarity observed or inferred at the earth on 82 percent of the days. The interplanetary field structure observed at the earth at this time is finely tuned to the structure of low-latitude fields on the source surface.

Hoeksema, J. T.↗

NASA geodynamics program

The goals of the NASA geodynamics program comprise the study of the interior structure and composition of the earth, its crustal motions and deformations, the rotational dynamics, and the terrestrial potential fields. Laser ranging an VLBI techniques are being applied in cooperation with 16 other countries. Reflectors on the moon are illumined with laser beams from earth, which are also bounced off the Lageos and French Starlette satellites, permitting monitoring of polar motion, earth rotation, and distance to the moon within 5 cm. Mobile laser systems are being deployed for developing a gravity field model and examining crustal deformation regionally. The VLBI installations use quasars as reference objects and the GPS satellites will give position accuracy within 1-2 cm. Satellite-to-satellite tracking, Magsat, and Shuttle timing experiment data are providing geopotential field data and timing synchronization.

Fischetti, T. L.↗

The rings of Uranus

Stellar occultation data on the Uranian rings are summarized. Spatial resolution is 0.1 km, for positions of ring segments, 4 km for structural details. The system consists of 9 narrow rings with average geometric albedo of 0.02. The data are well fitted by a kinematic model that describes the rings as ellipses, inclined to the equatorial plane of Uranus and precess due to harmonic terms in the Uranian potential fields. The main characteristics of the Uranian ring system that need a confirmed theoretical explanation are: narrow rings; sharp edges; uniform orbital precession; origin of the eccentricities and inclinations; the structure of the epsilon ring; the structure of the eta ring; and the origin of the ring system.

Elliot, J. L.↗

The three-dimensional compressible flow in a radial inflow turbine scroll

This work presents the results of an analytical study and an experimental investigation of the three-dimensional flow in a turbine scroll. The finite element method is used in the iterative numerical solution of the locally linearized governing equations for the three-dimensional velocity potential field. The results of the numerical computations are compared with the experimental measurements in the scroll cross sections, which were obtained using laser Doppler velocimetry and hot wire techniques. The results of the computations show a variation in the flow conditions around the rotor periphery which was found to depend on the scroll geometry.

Hamed, A.↗

The satellite magnetic anomaly of Ahaggar - Evidence for African Plate motion

The Ahaggar volcanic province of North Central Africa is considered a region of excess heat flow (hot spot) and hence elevated Curie isotherm. Using a modified version of the Parker FFT potential field representation, magnetic signals were calculated at Magsat altitudes for models in which the African Plate is both fixed and moving. The moving-plate model extends the Curie isotherm anomaly in the direction of plate motion and provides a satisfactory match to vertical component anomaly data when the magnitude of plate velocity is 0.75 cm/yr. Although the signal levels are marginal for the scalar component anomalies of this region, the same model provides an adequate match to this data set and is clearly preferable to a fixed-plate model.

Phillips, R. J.↗

Gravity gradient torque for an arbitrary potential function

To permit investigation of the relative effects of higher-order terms in the potential function and allow computation of the gravity gradient torques consistent with the gravitational acceleration for a given potential function, a simple formula is derived for computing the gravity gradient torque on a vehicle in terms of the eigenvalues and eigenvectors of the gravity gradient matrix and the inertia properties of the vehicle. The formulation is applicable to any potential function for which the gravity matrix can be computed for a given point in the potential field.

Glandorf, D. R.↗

Evaluation of spacecraft navigation using the Tracking and Data Relay Satellite System (TDRSS)

The navigational capabilities of the TDRSS for the operational support of user spacecraft is evaluated. A batch-weighted least-squares algorithm is used to fit tracking measurements and to generate orbit solutions for the TDRS-E spacecraft and the following user spacecraft: (1) the SMM, (2) the Landsat-5, (3) the Earth Radiation Budget Satellite (ERBS), and (4) the Solar Mesosphere Explorer (SME). TDRS-E orbit accuracy was evaluated by using the consistency of consecutive orbit solutions as a measure; user orbit accuracy was estimated by comparing orbits determined from TDRSS tracking with orbits obtained from ground tracking for the same time periods. It was found that the predicted accuracy of the TDRS-E orbit propagation was improved by as much as seven times by refining the spherical harmonic expansion model of the earth's potential field. The results obtained for SMM were fairly consistent, while those obtained for Landsat-5 were consistent to better than 80 meters. The orbits obtained using ERBS tracking were consistent to better than 60 meters and the SME orbits for two arcs with 14 and 20 passes of TDRSS tracking had a maximum position difference of 140 meters.

Samii, M. V.↗

Three-dimensional magnetostatic models of the large-scale corona

A special class of magnetostatic equilibria is described, which are mathematically simple and yet sufficiently versatile so as to fit any arbitrary normal magnetic flux prescribed at the photosphere. With these solutions, the corona can be modeled with precisely the same mathematically simple procedure as has previously been done with potential fields. The magnetostatic model predicts, in addition to the coronal magnetic field, the three dimensional coronal density which can be compared with coronagraph observations.

Bogdan, T. J.↗