Search NASA⌕ Search

SEARCH · Search NASA

Results for “Process intensification”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

Integrated Solar Thermochemical Reaction System (Final Report)

This report describes progress accomplished in a three-phase project that has advanced the concept for a Solar Thermochemical Advanced Reactor System (STARS) – a system that is designed to convert solar energy into storable/useful chemical energy – from Technology Readiness Level 3 to Technology Readiness Level 6. STARS accomplishes its objective by directing the heat from a dish concentrator onto a chemical reaction system, increasing the energy content of the feedstock, methane, a chemical fuel that is available from multiple sources including natural gas, landfills and anaerobic digesters. The system uses a parabolic dish solar concentrator, previously developed for electrical power generation, and a compact, process-intensive chemical reaction system based on micro- and meso-channel process technology (MMPT). The combined Dish-STARSTM system provides a solar augment to the incoming methane stream, increasing its chemical energy content by 20-30% while decreasing its carbon intensity. When the immediate chemical product, known as syngas, is directly used for power generation the result is electricity with approximately 20% less CO 2 emissions. Alternately, if the syngas is further reacted to produce valuable chemical products, such as hydrogen, the reduction in carbon emissions is retained and reduced carbon intensities can be attained for the chemical products. In a co-production mode, lowcarbon hydrogen or electricity plus various hydrocarbons (for example, methanol, olefins or plastics) can be produced. Over the course of this project, the efficiency of Dish-STARSTM was improved from a previous value of 63% to slightly over 70%, with results and analyses indicating a potential for values greater than 80%; manufacturing investigations identified fabrication methods for the MMPT components, proofed-out additive manufacturing for microchannel heat exchangers, developed equipment cost models and, together with on-sun testing, supported technoeconomic evaluations. If developed into commercial products, project results indicate the potential for the efficient use of concentrated solar energy in nearterm applications for electrical power generation and the production of chemicals, including hydrogen.

14 SOLAR ENERGY↗

Dish-STARS Commercialization (Final Report)

The goal of this project is to aggressively support the near-term commercialization of a new technology platform – based on the integration of solar concentrators and micro- and meso-channel process technology (MMPT) – that was evaluated and identified as a strong candidate for near-term commercialization at EERE’s inaugural Lab-Corps program during early FY2016. Known as STARS, for Solar Thermochemical Advanced Reactor System, or Dish-STARS TM when paired with parabolic dish concentrators, STARS is a promising energy-related technology developed at the Pacific Northwest National Laboratory (PNNL) that efficiently converts solar energy into chemical energy. Combined with economies through hardware mass production, the efficiency of Dish-STARS TM provides a near-term opportunity for the production of renewable electricity, fuels and chemicals. The project supported the cooperative development of Dish-STARSTM by PNNL and industry partners including California Gas Company (SoCalGas) and the startup company, STARS Technology Corporation (STC), which was founded by the PNNL Lab-Corps team that evaluated STARS on behalf of EERE. Under this project, the team advanced the Technology Readiness Level 6 (TRL 6) STARS reaction system, developed under the previous DOE SunShot project, to TRL 7 through on-sun testing in California by PNNL. The advances made in this project enabled STC to accelerate commercial development and initiate work towards a major technology demonstration in California for a hydrogen filling station application.

14 SOLAR ENERGY↗

Rapid 500-mb cyclogenesis and anticyclogenesis

The process of intensification of 500-mb cyclones and anticyclones as represented in NMC's 500-mb analyses is investigated, using a sample of records for 500-mb cyclones and anticyclones drawn from the cool season of September 1983 through May 1984 to determine the statistically large intensification rates and thus to establish criteria for rapid intensification. From the catalog of all rapidly intensifying 500-mb cyclones and anticyclones defined by these criteria, seasonal and geographical frequency distributions of cyclogenesis and anticyclogenesis is constructed. It is shown that, for the data sample used in this analysis, the operational forecast models tend to underpredict rapid developments of 500-mb cyclones and anticyclones.

Alberta, Timothy L.↗

Process Model-Based Validation of the Intensification of Biomass Fast Pyrolysis in a Fluidized Bed via Autothermal Operation

A model for the fluidized-bed pyrolysis of biomass is extended to enable the simulation of intensified autothermal operation. In this system, partial oxidation of char and pyrolysate species replaces an external heat source to supply the enthalpy of pyrolysis, greatly increasing the throughput of a given fast pyrolysis reactor. Oxidation reactions are compiled from CRECK and other literature sources and extended to cover the species found in pyrolysis products, including a derivation of the catalytic effect of ash on char combustion from experimental studies at Iowa State University (ISU). Results indicate a roughly 3-fold increase in biomass throughput for a given reactor volume at the pilot scale with minimal loss of valuable products, in agreement with published data from the 3 × 10 -2 m 3 reactor operated by ISU. Additionally, a proposal for a 250 ton/day commercial-scale biomass pyrolysis reactor is analyzed, showing that the same size reactor operated by heating the fluidizing gas externally would have only one-tenth the capacity; if operated by heating the sand externally, the sand would need to circulate at an impractical 0.7 bed volume per minute rate to maintain a 250 ton/day biomass throughput.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Process Control and Energy Efficiency

We review the impact of control systems and strategies on the energy efficiency of chemical processes. We show that, in many ways, good control performance is a necessary but not sufficient condition for energy efficiency. The direct effect of process control on energy efficiency is manyfold: Reducing output variability allows for operating chemical plants closer to their limits, where the energy/economic optima typically lie. Further, good control enables novel, transient operating strategies, such as conversion smoothing and demand response. Indirectly, control systems are key to the implementation and operation of more energy-efficient plant designs, as dictated by the process integration and intensification paradigms. Our conclusions are supported with references to numerous examples from the literature.

42 ENGINEERING↗

The breakup of trailing-line vortices

It is now known that Batchelor's trailing-line vortex is extremely unstable to small amplitude disturbances for swirl numbers in the neighborhood of 0.83. The results of numerical calculations are presented that show the response of the vortex in this range of swirl numbers to finite amplitude, temporal, helical disturbances. Phenomena observed include: (1) ejection of axial vorticity and momentum from the core resulting in the creation of secondary, separate vortices; (2) a great intensification of core axial vorticity and a weakening of core momentum; and (3) the production of azimuthal vorticity in the form of a tightly wrapped spiral wave. The second phenomenon eventually stablizes the vortex, which then smooths and gradually returns to an axisymmetric state. The calculations are mixed spectral-finite-difference, fourth-order accurate, and have been carried out at Reynolds numbers of 1000 to 2000. Some linearized results are also discussed in an attempt to explain the process of vortex intensification.

Jacqmin, David↗

Stability of Solutions of Initial Boundary-Balue Problems of Aerohydroelasticity

In designing structures and devices interacting with the flow of gas or liquid, it is necessary to solve the problems associated with the investigation of the stability required for their functioning and operational reliability. The definition of stability of an elastic body taken in the article corresponds to Lyapunov’s concept of stability of a dynamical system. On the base of the proposed nonlinear mathematical model the dynamic stability of the elastic aileron of the wing taking into account the incident subsonic flow of gas or liquid (in an ideal model of an incompressible environment) is investigated. Also a nonlinear mathematical model of the device relating to the vibration technique, which is intended for intensification of technological processes, for example, the process of mixing, is considered. The action of these devices is based on the oscillations of elastic elements during the gas or liquid flow. The dynamic stability of the elastic element located on one wall of the flow channel with the subsonic flow of gas or liquid (in an ideal model of a compressible environment) is investigated. Both models are described by a coupled nonlinear system of differential equations for the unknown functions — the potential of the gas velocity and deformation of the elastic element. On the basis of the construction of functionals, we obtain the sufficient conditions of the stability, the imposed restrictions on the free-stream velocity of the gas, the flexural stiffness of the elastic element, and other parameters of the mechanical system. The examples of construction of the stability regions for particular parameters of the mechanical system are presented.

42 ENGINEERING↗

Modeling Flow and Mass Transfer within Hollow Fiber Packaging for Gas Separation

Hollow fiber membrane modules are used for gas purification by their selective permeation properties. Intensification of the process to minimize the retentate loss and gas pressure involves optimization at various scales. In this work, we outline a numerical investigation of the gas separation performance at the scale of fiber bundles and its impact on module performance. Flow channeling and anisotropy govern the mass-transfer coefficient in axial and cross-flow configurations. These effects are quantified in terms of a permeability tensor or an anisotropy ratio and the effective mass-transfer coefficient or the Sherwood number. The results show a trade-off between purification and recovery. While smaller fibers offer a large specific surface area to enable high purification, it comes at a huge penalty on the separation performance due to reduced penetration within bundles. Optimum performance indicators are emphasized.

Fibers↗

Tailoring polyvinyl alcohol-sodium alginate (PVA-SA) hydrogel beads by controlling crosslinking pH and time

Abstract Hydrogel-encapsulated catalysts are an attractive tool for low-cost intensification of (bio)-processes. Polyvinyl alcohol-sodium alginate hydrogels crosslinked with boric acid and post-cured with sulfate (PVA-SA-BS) have been applied in bioproduction and water treatment processes, but the low pH required for crosslinking may negatively affect biocatalyst functionality. Here, we investigate how crosslinking pH (3, 4, and 5) and time (1, 2, and 8 h) affect the physicochemical, elastic, and process properties of PVA-SA-BS beads. Overall, bead properties were most affected by crosslinking pH. Beads produced at pH 3 and 4 were smaller and contained larger internal cavities, while optical coherence tomography suggested polymer cross-linking density was higher. Optical coherence elastography revealed PVA-SA-BS beads produced at pH 3 and 4 were stiffer than pH 5 beads. Dextran Blue release showed that pH 3-produced beads enabled higher diffusion rates and were more porous. Last, over a 28-day incubation, pH 3 and 4 beads lost more microspheres (as cell proxies) than beads produced at pH 5, while the latter released more polymer material. Overall, this study provides a path forward to tailor PVA-SA-BS hydrogel bead properties towards a broad range of applications, such as chemical, enzymatic, and microbially catalyzed (bio)-processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Advancing Desalination and Treatment of Non-Traditional Source Water: The First 3.5 Years of the National Alliance for Water Innovation (NAWI)

The National Alliance for Water Innovation (NAWI) is the U.S. DOE's 5-year, $110M research Hub focused on desalination and water reuse. NAWI is organized into three Topic Areas in which projects are managed and coordinated: Materials and Manufacturing R&D (M&M), Process Innovation and Intensification R&D (PI&I), and Data, Modeling, and Analysis (DMA). In its first 3.5 years, NAWI has established the largest integrated DOE Innovation Hub (108 Research Consortium member organizations, 440 Alliance member organizations) anchored around its APRIME vision for lowering the cost and energy of desalination and water reuse. NAWI has selected 74 research projects to date, and several have reported major advances in desalination research and technology in leading scientific publications.

desalination↗

Cobalt promotion of the InO x –TiO 2 heterojunction for dual photothermal reduction of CO 2

A series of cobalt-promoted indium–titanium composite oxides was synthesized using a microemulsion method. Their functional properties were investigated for the photothermal reduction of carbon dioxide. In this series, the indium content varied between 2.5 and 20%, while the cobalt percentage was kept constant at 4% throughout the series. In all cases, carbon monoxide formation occurred selectively through the reverse water gas shift reaction. The sample with 2.5% In maximized the synergistic use of the two energy sources, while the sample with 10% In showed the highest catalytic activity under both thermal and dual photo-thermo conditions. A physicochemical characterization was performed for all samples. The use of microscopy and X-ray absorption spectroscopy demonstrated that sub-nanometric indium entities, in combination with atomically dispersed cobalt oxide entities, achieved a balance between high thermal activity and significant synergy between light and heat in a catalytic process. The system with 10% indium is thus able to improve the thermal catalytic process through the use of light, providing an intensification procedure for the classic process.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗