Search NASA⌕ Search

SEARCH · Search NASA

Results for “Process variable”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

Predicting Ecologically Important Vegetation Variables from Remotely Sensed Optical/Radar Data Using Neural Networks

A number of satellite sensor systems will collect large data sets of the Earth's surface during NASA's Earth Observing System (EOS) era. Efforts are being made to develop efficient algorithms that can incorporate a wide variety of spectral data and ancillary data in order to extract vegetation variables required for global and regional studies of ecosystem processes, biosphere-atmosphere interactions, and carbon dynamics. These variables are, for the most part, continuous (e.g. biomass, leaf area index, fraction of vegetation cover, vegetation height, vegetation age, spectral albedo, absorbed photosynthetic active radiation, photosynthetic efficiency, etc.) and estimates may be made using remotely sensed data (e.g. nadir and directional optical wavelengths, multifrequency radar backscatter) and any other readily available ancillary data (e.g., topography, sun angle, ground data, etc.). Using these types of data, neural networks can: 1) provide accurate initial models for extracting vegetation variables when an adequate amount of data is available; 2) provide a performance standard for evaluating existing physically-based models; 3) invert multivariate, physically based models; 4) in a variable selection process, identify those independent variables which best infer the vegetation variable(s) of interest; and 5) incorporate new data sources that would be difficult or impossible to use with conventional techniques. In addition, neural networks employ a more powerful and adaptive nonlinear equation form as compared to traditional linear, index transformations, and simple nonlinear analyses. These neural networks attributes are discussed in the context of the authors' investigations of extracting vegetation variables of ecological interest.

Kimes, Daniel S.↗

Modernization of Insulative Reusable Thermal Protection Systems (IRTPS)

Insulative thermal protection systems, such as Flexible Reusable Surface Insulation blankets and High Temperature Reusable Surface Insulation tiles, were developed for the Shuttle Orbiter to enable reuse of the vehicle for low-earth orbit missions. Since reusability is essential to many new industry launch and space vehicles, Shuttle-derived thermal protection materials (TPMs) are being sought for their flight proven performance. Alumina Enhanced Thermal Barrier (AETB) is the state-of-the-art tile material that was developed in the 90’s. AETB along with associated coatings, reaction cured glass (RCG) and Toughened Unipiece Fibrous Insulation (TUFI), are currently made by NASA using heritage raw materials derived from lifetime purchases. Finding viable replacements for raw materials that have changed in nature or are obsolete is important for continuation of these TPMs. In some cases, the use of modern raw materials has been shown to yield tile with reduced performance, most notably in mechanical properties. ​ In this work, the production of AETB will be discussed to better understand the process-structure-property relationships and for allowing use of these modern alternatives. A small-scale tile casting system was developed for rapid and efficient exploration of the manufacturing variables such raw material selection and pre-processing, casting process parameters, and billet firing protocols. An optical transmission defect characterization technique was implemented to correlate process variables to structure. Comparisons between TUFI/RCG coated AETB derived from heritage and modern raw materials will be shown including AHF arc jet test results completed under a collaboration with Stratolaunch.

thermal protection materials↗

Integration of space and in situ observations to study global climate change

The use of model-based global data sets of atmospheric circulation for studying fundamental dynamical and physical processes is discussed, focusing on limitations of the available model-based data sets. Data from the Global Weather Experiment in 1979 were analyzed by two authorized level IIIb data centers in 1980 and in 1981. The analyses led to difference in data-sparse regions such as the tropics. Study areas which can be addressed by an internally-consistent long-term multivariate data set for the atmospheric circulation are considered, including mean climate, forcing for the ocean models, global hydrological cycle, atmospheric energetics, intraseasonal variability, land surface processes, and structure and variability of vertical velocity, divergence, and diabatic heating. It is concluded that the most comprehensive technique for integrating space and in situ observations to produce this type of data set would be a four-dimensional data assimilation system with a realistic physical model of the type employed in operational numerical weather prediction.

Bengtsson, L.↗

Ozone and water vapor monitoring using a ground-based lidar system

Measurements of atmospheric ozone and water vapor profiles obtained using a differential absorption lidar (DIAL) technique at Haute Provence Observatory are reported. The DIAL technique is based on the comparison of differences in attenuation in backscattered signals at wavelengths centered on strong absorptions or absorption lines of the species in question, and wavelengths corresponding to weaker or no absorption. The system in use is based on three lasers - a Nd:YAG Q-switched laser frequency doubled to emit at 532 nm, and two tunable narrowline dye lasers used to convert this emission into the IR or UV spectral regions. Ozone concentration profiles have been recorded up to a height of 30 km, and reveal large day-to-day variations in number density which were correlated with a decrease in tropopause height. Measurements of water vapor concentrations show a variability of the mixing ratio at heights up to 2.5 km representative of dynamic processes, and a variability above 2.5 km that is within the measurement error. Day-to-day variations in tropospheric mixing ratio were also observed.

Megie, G.↗

Carrying the mass flux terms exactly in the first and second moment equations of compressible turbulence

In compressible turbulence models, it is assumed that the Favre-mean velocities are suitable approximations to the Reynolds-mean velocities in order to close unknown terms. This neglects, in the mean momentum and energy equations, the contribution to the stress and work terms by the mean of the fluctuating Favre velocity, a quantity proportional to the turbulent mass flux. As the stress and work terms do not introduce any new unknown correlations requiring closure in either k-epsilon or Reynolds stress closures and because the exact form of the terms can, with little additional work, be carried there is no need to make any modeling assumptions. In the Reynolds stress equations the viscous terms appear naturally in Reynolds variables while the problem is posed in Favre variables. In the process of splitting the viscous terms into the viscous transport terms, carried in Favre variables, and the dissipation terms, carried in Reynolds variables, important contributions from the mass flux appear. The accurate accounting of these terms is important for any consistent near wall modeling and the retention of the mass flux terms is important in complex compressible turbulent flows.

Ristorcelli, J. R.↗

Research into the influence of spatial variability and scale on the parameterization of hydrological processes

The objectives of the research were as follows: (1) Extend the Representative Elementary Area (RE) concept, first proposed and developed in Wood et al, (1988), to the water balance fluxes of the interstorm period (redistribution, evapotranspiration and baseflow) necessary for the analysis of long-term water balance processes. (2) Derive spatially averaged water balance model equations for spatially variable soil, topography and vegetation, over A RANGE OF CLIMATES. This is a necessary step in our goal to derive consistent hydrologic results up to GCM grid scales necessary for global climate modeling. (3) Apply the above macroscale water balance equations with remotely sensed data and begin to explore the feasibility of parameterizing the water balance constitutive equations at GCM grid scale.

Wood, Eric F.↗

Space Station - An innovative approach to manufacturing development

The development of the common modules for the planned dual-keel Space Station, which is a figure-eight configuration that requires the use of four common modules linked by six docking nodes in the center of the Station, is examined. The fabrication of the proposed common module designs, which are a four-barrel common module structure built using excess external tank barrel panels (Martin Marietta Michoud Aerospace), and a three-barrel design consisting of 2219 Al skins with a waffle-grid pattern machined on the outer surface (Boeing Aerospace Corporation) is described. The assistance provided by the NASA-Marshall Space Flight Center's Materials and Processes Laboratory, in particular the variable polarity plasma arc welding process, in the development of the common modules is discussed.

Sullivan, Kenneth W.↗

Weld fracture criteria for computer simulation

Due to the complexity of welding, not all of the important factors are always properly considered and controlled. An automatic system is required. This report outlines a simulation method and all the important considerations to do this. As in many situations where a defect or failure has occurrred, it is freqently necessary to trouble shoot the system and eventually identify those factors that were neglected. This is expensive and time consuming. Very frequently the causes are materials-related that might have been anticipated. Computer simulation can automatically consider all important variables. The major goal of this presentation is to identify the proper relationship to design, processing and materials variables to welding.

Jemian, Wartan A.↗

Assessing Bare-Ice Albedo Simulated By MAR Over the Greenland Ice Sheet (2000–2021) and Implications for Meltwater Production Estimates

Surface mass loss from the Greenland ice sheet (GrIS) has accelerated over the past decades, mainly due to enhanced surface melting and liquid water runoff in response to atmospheric warming. A large portion of runoff from the GrIS originates from exposure of the darker bare ice in the ablation zone when the overlying snow melts, where surface albedo plays a critical role in modulating the energy available for melting. In this regard, it is imperative to understand the processes governing albedo variability to accurately project future mass loss from the GrIS. Bare-ice albedo is spatially and temporally variable and contingent on non-linear feedbacks and the presence of light-absorbing constituents. An assessment of models aiming at simulating albedo variability and associated impacts on meltwater production is crucial for improving our understanding of the processes governing these feedbacks and, in turn, surface mass loss from Greenland. Here, we report the results of a comparison of the bare-ice extent and albedo simulated by the regional climate model Modèle Atmosphérique Régional (MAR) with satellite imagery from the Moderate Resolution Imaging Spectroradiometer (MODIS) for the GrIS below 70∘ N. Our findings suggest that MAR overestimates bare-ice albedo by 22.8 % on average in this area during the 2000–2021 period with respect to the estimates obtained from MODIS. Using an energy balance model to parameterize meltwater production, we find this bare-ice albedo bias can lead to an underestimation of total meltwater production from the bare-ice zone below 70∘ N of 42.8 % during the summers of 2000–2021.

albedo↗

Life Prediction/Reliability Data of Glass-Ceramic Material Determined for Radome Applications

Brittle materials, ceramics, are candidate materials for a variety of structural applications for a wide range of temperatures. However, the process of slow crack growth, occurring in any loading configuration, limits the service life of structural components. Therefore, it is important to accurately determine the slow crack growth parameters required for component life prediction using an appropriate test methodology. This test methodology also should be useful in determining the influence of component processing and composition variables on the slow crack growth behavior of newly developed or existing materials, thereby allowing the component processing and composition to be tailored and optimized to specific needs. Through the American Society for Testing and Materials (ASTM), the authors recently developed two test methods to determine the life prediction parameters of ceramics. The two test standards, ASTM 1368 for room temperature and ASTM C 1465 for elevated temperatures, were published in the 2001 Annual Book of ASTM Standards, Vol. 15.01. Briefly, the test method employs constant stress-rate (or dynamic fatigue) testing to determine flexural strengths as a function of the applied stress rate. The merit of this test method lies in its simplicity: strengths are measured in a routine manner in flexure at four or more applied stress rates with an appropriate number of test specimens at each applied stress rate. The slow crack growth parameters necessary for life prediction are then determined from a simple relationship between the strength and the applied stress rate. Extensive life prediction testing was conducted at the NASA Glenn Research Center using the developed ASTM C 1368 test method to determine the life prediction parameters of a glass-ceramic material that the Navy will use for radome applications.

Choi, Sung R.↗

Resolution of an Orbital Issue: A Designed Experiment

Design of Experiments (DOE) is a systematic approach to investigation of a system or process. A series of structured tests are designed in which planned changes are made to the input variables of a process or system. The effects of these changes on a pre-defined output are then assessed. DOE is a formal method of maximizing information gained while minimizing resources required.

Huddleston, Lisa L.↗

Engineering Overview of a Multidisciplinary HSCT Design Framework Using Medium-Fidelity Analysis Codes

An objective of the HPCC Program at NASA Langley has been to promote the use of advanced computing techniques to more rapidly solve the problem of multidisciplinary optimization of a supersonic transport configuration. As a result, a software system has been designed and is being implemented to integrate a set of existing discipline analysis codes, some of them CPU-intensive, into a distributed computational framework for the design of a High Speed Civil Transport (HSCT) configuration. The proposed paper will describe the engineering aspects of integrating these analysis codes and additional interface codes into an automated design system. The objective of the design problem is to optimize the aircraft weight for given mission conditions, range, and payload requirements, subject to aerodynamic, structural, and performance constraints. The design variables include both thicknesses of structural elements and geometric parameters that define the external aircraft shape. An optimization model has been adopted that uses the multidisciplinary analysis results and the derivatives of the solution with respect to the design variables to formulate a linearized model that provides input to the CONMIN optimization code, which outputs new values for the design variables. The analysis process begins by deriving the updated geometries and grids from the baseline geometries and grids using the new values for the design variables. This free-form deformation approach provides internal FEM (finite element method) grids that are consistent with aerodynamic surface grids. The next step involves using the derived FEM and section properties in a weights process to calculate detailed weights and the center of gravity location for specified flight conditions. The weights process computes the as-built weight, weight distribution, and weight sensitivities for given aircraft configurations at various mass cases. Currently, two mass cases are considered: cruise and gross take-off weight (GTOW). Weights information is obtained from correlations of data from three sources: 1) as-built initial structural and non-structural weights from an existing database, 2) theoretical FEM structural weights and sensitivities from Genesis, and 3) empirical as-built weight increments, non-structural weights, and weight sensitivities from FLOPS. For the aeroelastic analysis, a variable-fidelity aerodynamic analysis has been adopted. This approach uses infrequent CPU-intensive non-linear CFD to calculate a non-linear correction relative to a linear aero calculation for the same aerodynamic surface at an angle of attack that results in the same configuration lift. For efficiency, this nonlinear correction is applied after each subsequent linear aero solution during the iterations between the aerodynamic and structural analyses. Convergence is achieved when the vehicle shape being used for the aerodynamic calculations is consistent with the structural deformations caused by the aerodynamic loads. To make the structural analyses more efficient, a linearized structural deformation model has been adopted, in which a single stiffness matrix can be used to solve for the deformations under all the load conditions. Using the converged aerodynamic loads, a final set of structural analyses are performed to determine the stress distributions and the buckling conditions for constraint calculation. Performance constraints are obtained by running FLOPS using drag polars that are computed using results from non-linear corrections to the linear aero code plus several codes to provide drag increments due to skin friction, wave drag, and other miscellaneous drag contributions. The status of the integration effort will be presented in the proposed paper, and results will be provided that illustrate the degree of accuracy in the linearizations that have been employed.

Weston, R. P.↗

Interannual Variations of TOA Albedo over the Arctic, Antarctic and Tibetan Plateau in 2000–2019

Recent changes in Earth’s climate system have significantly affected the radiation budget and its year-to-year variations at top of the atmosphere (TOA). Observing high-latitude TOA fluxes is still challenging from space, because spatial inhomogeneity of surface/atmospheric radiative processes and spectral variability can reflect sunlight very differently. In this study we analyze the 20-year TOA flux and albedo data from CERES and MISR over the Arctic, the Antarctic, and Tibetan Plateau (TP), and found overall great consistency in the TOA albedo trend and interannual variations. The observations reveal a lagged correlation between the Arctic and subarctic albedo fluctuations. The observed year-to-year variations are further used to evaluate the reanalysis data, which exhibit substantial shortcomings in representing the polar TOA flux variability. The observed Arctic flux variations are highly correlated with cloud fraction (CF), except in the regions where CF > 90% or where the surface is covered by ice. An empirical orthogonal function (EOF) analysis shows that the first five EOFs can account for ~50% of the Arctic TOA variance, whereas the correlation with climate indices suggests that Sea Ice Extent (SIE), North Atlantic Oscillation (NAO) and 55°N–65°N cloudiness are the most influential processes in driving the TOA flux variabilities.

interannual variations↗

Real Time Land-Surface Hydrologic Modeling Over Continental US

The land surface component of the hydrological cycle is fundamental to the overall functioning of the atmospheric and climate processes. Spatially and temporally variable rainfall and available energy, combined with land surface heterogeneity cause complex variations in all processes related to surface hydrology. The characterization of the spatial and temporal variability of water and energy cycles are critical to improve our understanding of land surface-atmosphere interaction and the impact of land surface processes on climate extremes. Because the accurate knowledge of these processes and their variability is important for climate predictions, most Numerical Weather Prediction (NWP) centers have incorporated land surface schemes in their models. However, errors in the NWP forcing accumulate in the surface and energy stores, leading to incorrect surface water and energy partitioning and related processes. This has motivated the NWP to impose ad hoc corrections to the land surface states to prevent this drift. A proposed methodology is to develop Land Data Assimilation schemes (LDAS), which are uncoupled models forced with observations, and not affected by NWP forcing biases. The proposed research is being implemented as a real time operation using an existing Surface Vegetation Atmosphere Transfer Scheme (SVATS) model at a 40 km degree resolution across the United States to evaluate these critical science questions. The model will be forced with real time output from numerical prediction models, satellite data, and radar precipitation measurements. Model parameters will be derived from the existing GIS vegetation and soil coverages. The model results will be aggregated to various scales to assess water and energy balances and these will be validated with various in-situ observations.

Houser, Paul R.↗

The Space Shuttle Ground Terminal Delta Modulation System

Shuttle voice processing uses a Variable Slope Delta Modulation scheme which is a variant of the ABATE algorithm. This paper summarizes the ground terminal subsystem which processes the multiplexed voice and telemetry data digital sequence in the downlink processing and digitizes the voice signal in the uplink processing. The Delta Modulation System (DMS) performance characteristics are given in terms of an intelligibility test score and in terms of time and frequency responses measured on a production system developed for NASA Goddard Space Flight Center. Implementation details of the encoder and decoder algorithms are given in terms of the circuit logic used to implement them.

Auger, R. L.↗

Along-strike magma mixing beneath mid-ocean ridges - Effects on isotopic ratios

The effects of mixing processes on the isotopic variability of midocean ridge basalts are studied. The processes considered are porous flow dispersion and convective mixing in magma chambers. Porous flow dispersion is capable of mixing magmas over distances of only a few tens of meters. Convective mixing, on the other hand, is found to produce continuous magma chambers, where mixing is limited by convective processes, and for discontinuous chambers, where mixing is limited by chamber size. Preliminary comparison of the calculations with observations along the midocean ridges shows that the calculations are consistent with the existence of a correlation between bathymetry and isotopic ratio at long, but not at short, wavelengths. They are also capable of explaining a decrease in isotopic variability with increasing spreading rate.

Kenyon, P. M.↗