Search NASA⌕ Search

SEARCH · Search NASA

Results for “Projectiles”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
NASA NTRS1977

Microcraters on lunar samples

The lunar microcrater phenomenology is described. The morphology of the lunar craters is in almost all aspects simulated in laboratory experiments in the diameter range from less than 1 nu to several millimeters and up to 60 km/s impact velocity. An empirically derived formula is given for the conversion of crater diameters into projectile diameters and masses for given impact velocities and projectile and target densities. The production size frequency distribution for lunar craters in the crater size range from approximately 1 nu to several millimeters in diameter is derived from various microcrater measurements within a factor of up to 5. Particle track exposure age measurements for a variety of lunar samples have been performed. They allow the conversion of the lunar crater size frequency production distributions into particle fluxes. The development of crater populations on lunar rocks under self-destruction by subsequent meteoroid impacts and crater overlap is discussed and theoretically described. Erosion rates on lunar rocks on the order of several millimeters per 10 yr are calculated. Chemical investigations of the glass linings of lunar craters yield clear evidence of admixture of projectile material only in one case, where the remnants of an iron-nickel micrometeorite have been identified.

Fechtig, H.↗
NASA NTRS1965

Hypervelocity gun

A velocity amplifier system which uses both electric and chemical energy for projectile propulsion is provided in a compact hypervelocity gun suitable for laboratory use. A relatively heavy layer of a tamping material such as concrete encloses a loop of an electrically conductive material. An explosive charge at least partially surrounding the loop is adapted to collapse the loop upon detonation of the charge. A source of electricity charges the loop through two leads, and an electric switch which is activated by the charge explosive charge, disconnects the leads from the source of electricity and short circuits them. An opening in the tamping material extends to the loop and forms a barrel. The loop, necked down in the opening, forms the sabot on which the projectile is located. When the loop is electrically charged and the explosive detonated, the loop is short circuited and collapsed thus building up a magnetic field which acts as a sabot catcher. The sabot is detached from the loop and the sabot and projectile are accelerated to hypervelocity.

Ford, F. C.↗
NASA NTRS1979

Adhesive material transfer in the erosion of an aluminum alloy

In order to study the basic mechanisms of erosion, hardened steel balls were shot into annealed 6061 Al alloy targets at velocity of up to 150 m/sec. The projectiles were collected and examined by a scanning electron microscope combined with energy-dispersive X-ray analyzer and it was found that target material in substantial amounts is adhesively transferred to the projectile. The transferred material forms on the projectile surface a layer the thickness of which increases with increases in impact velocity.

Salik, J.↗
NASA NTRS1981

Design and testing of small composite specimens

The effect of specimen size on the buckling strains of laminates subjected to low velocity projectile impact was investigated. The fiber composite selected was T300/5208 graphite/epoxy system. The quasi-isotropic laminates tested had 16 and 32 plies. The results were compared with those of a 48-ply laminate. Specimens of three different lengths with length to width aspect ratios of 1, 1.5, and 2 were also studied. The results show that (1) the specimen length does not have any significant influence on the buckling strains at failure caused by the projectile impact, and (2) the influence of specimen thickness on the strains at failure would decrease as the velocity of the impacting projectile increases.

Sharma, A. V.↗
NASA NTRS1980

Impact melt generation and transport

The results from the first two calculations in a series of continuum mechanics computer code calculations, investigating the effects of variations in impactor mass and velocity on the generation and transport of impact melt, are reported. In the present calculations, the impactor is modeled as a spherical iron projectile with a mass of one trillion grams, and the target as a gabbroic anorthosite (GA) half-space, where the cases calculated have impact velocities of 5 and 15.8 km/sec. Early-time ejection velocities are 1-2 km/sec in both cases. The first calculation results in 0.07 projectile masses of GA being partly or completely melted, with all the melted GA being ejected from the crater, and a maximum impact range for the ejected melted material of 30 km. The second calculation yields 10.4 projectile masses of melted GA, 50% of which is ejected from the crater to ranges of up to about 130 km. Peak shock pressure attenuation with depth is reported for both cases, and transient cavity dynamics are described and compared to that for surface and near-surface explosions.

Orphal, D. L.↗
NASA NTRS1982

The record of impact on earth - Implications for a major Cretaceous/Tertiary impact event

Cratering mechanics suggests that if the proposed Cretaceous-Tertiary impact event occurred in the ocean, it may have been able to locally excavate the oceanic crust and bring upper mantle material to the surface, thereby creating a geophysical anomaly that has yet to be detected. If the siderophile enrichments in the Cretaceous-Tertiary boundary layer denote projectile-contaminated ejecta from a major impact, the source of this material will probably be ejecta which had been accelerated upwards as the projectile penetrated the target rocks. The difficulties in defining projectile types from the siderophile anomalies in the relatively well known environment of impact melt rocks suggest that more detailed geochemistry and mineralogy will be needed before the siderophile enrichments at the Cretaceous-Tertiary boundary can be linked to a specific meteoritic compositional class.

Grieve, R. A. F.↗
NASA NTRS1982

Ejecta of the Ries Crater, Germany

Attention is given to the light which may be shed by the ejecta surrounding the 26-km diameter Ries Crater in West Germany on the Cretaceous-Tertiary Boundary Event. Moldavites represent early high speed ejecta originating at the projectile-target interface. Bunte breccia reflects the major excavation and ejection phase, comprising more than 90 percent of all ejecta beyond the rim crest. Suevite is deposited last, and is derived from the deepest target stratum. Using various scaling laws that relate the bolide's kinetic energy to crater geometry or volume, and assuming a 25 km/sec impact velocity, a 1-2 km projectile diameter is obtained for a stony object. Geochemical studies reveal that projectile dissemination is heterogeneous, and that maximum extraterrestrial contamination modeled as a C1 chondrite is 0.004 wt pct. Observations from this and other terrestrial craters show that tektites and microtectites provide the sole evidence for widespread impact deposits.

Horz, F.↗
NASA NTRS1984

Investigation of the residue in an electric rail gun employing a plasma armature

The performance of dc electric rail guns using plasma-armature-accelerated projectiles was studied. It was found that the initial rail launcher acceleration profile was consistent with the simulation, but that after the projectile had traveled approximately 25 to 30 cm along the gun, a considerable portion of the current in the projectile armature commutated into a secondary current path. Also noted were the lower than expected muzzle velocities. It was proposed that the secondary current path was a relatively high conductivity layer of residue on the launcher bore.

Bauer, D. P.↗
NASA NTRS1985

Formation of the prelunar accretion disk

Considerations related to the angular momentum of the earth-moon system have led Ward and Cameron (1978) to the suggestion of a collisional origin of the moon. The required projectile would be about the mass of Mars (i.e., about 0.1 earth masses). The possibility has been considered that both the proto-earth and the projectile would be remnants of the formation of giant gaseous protoplanets. Processes of lunar formation studied take into account the viscous dissipation of an accretion disk. The present paper is concerned with the formation of the prelunar accretion disk. The hydrodynamics of a compressible viscous gas are simulated with the aid of the particle-in-cell method. The obtained results imply that the projectile is in an elliptical earth-crossing orbit.

Cameron, A. G. W.↗
NASA NTRS1986

Oblique impact: A process for providing meteorite samples of other planets

Cratering flow calculations for a series of oblique to normal impacts of silicate projectiles onto a silicate halfspace were carried out to determine whether the gas produced upon shock vaporizing both projectile and planetary material could entrain and accelerate surface rocks and thus provide a mechanism for propelling SNC meteorites from the Martian surface. The difficult constraints that the impact origin hypothesis for SNC meteorites has to satisfy are that these meteorites are lightly to moderately shocked and yet were accelerated to speeds in excess of the Martian escape velocity. Two dimensional finite difference calculations demonstrate that at highly probable impact velocities, vapor plume jets are produced at oblique impact angles of 25 deg to 60 deg and have speeds as great as 20 km/sec. These plumes flow nearly parallel to the planetary surface. It is shown that upon impact of projectiles having radii of 0.1 to 1 km, the resulting vapor jets have densities of 0.1 to 1 g/cu.cm. These jets can entrain Martian surface rocks and accelerate them to velocities 5 km/sec. It is suggested that this mechanism launches SNC meteorites to Earth.

Okeefe, J. D.↗
NASA NTRS1986

Hall station and camera system operation and maintenance manual

The major components of the Hall station and camera system are described. The Hall film record of an event provides the time of flight of the projectile between the slits. A time mark generator is used to supply extremely short pulses of light at a known frequency. These pulses of light are used to produce timing marks on the edge of the film. Comparison of these marks with the spacing of the projectile images provides the information necessary to determine the time of flight of the projectile. Since the slits are installed with a known separation distance, calculation of the velocity of any object passing both slits is a simple matter.

Piekutowski, A. J.↗
NASA NTRS1987

Impact verification of space suit design for space station

The ballistic limits of single sheet and double sheet structures made of 6061 T6 Aluminum of 1.8 mm and larger nominal thickness were investigated for projectiles of 1.5 mm diameter fired in the Vertical Gun Range Test Facility and NASA Ames Research Center. The hole diameters and sheet deformation behavior were studied for various ratios of sheet spacing to projectile diameter. The results indicate that for projectiles of less than 1.5 mm diameter the ballistic limit exceeds the nominal 10 km/sec orbital debris encounter velocity, if a single-sheet suit of 1.8 mm thickness is behind a single bumper sheet of 1 mm thickness spaced 12.5 mm apart.

Fish, Richard H.↗
NASA NTRS1987

Experimental evidence for non-proportional growth of large craters

Evidence from laboratory impact experiments is indicating that increasing crater aspect ratios (diameter:depth) can result from increasing both velocity and projectile size without invoking unusual impactor conditions. An extensive data base of experimental impact cratering was analyzed for a variety of impactors and impact velocities for low strength targets. These data indicate a change in cratering efficiency that appears to be related to the onset of projectile deformation or rupture. When all projectile types and sizes are considered, one finds two contrasting relationships between crater aspect ratio and impactor parameter. These relationships are briefly considered.

Schultz, Peter H.↗
NASA NTRS1987

Space station integrated wall design and penetration damage control. Task 3: Theoretical analysis of penetration mechanics

The efforts to provide a penetration code called PEN4 version 10 is documented for calculation of projectile and target states for the impact of 2024-T3 aluminum, R sub B 90 1018 steel projectiles and icy meteoroids onto 2024-T3 aluminum plates at impact velocities from 0 to 16 km/s. PEN4 determines whether a plate is perforated by calculating the state of fragmentation of projectile and first plate. Depth of penetration into the second to n sup th plate by fragments resulting from first plate perforation is determined by multiple cratering. The results from applications are given.

Bjorkman, M. D.↗
NASA NTRS1986

Oblique impact - A process for obtaining meteorite samples from other planets

Cratering flow calculations for a series of oblique to normal impacts of silicate projectiles onto a silicate halfspace were carried out to determine whether the gas produced upon shock vaporizing both projectile and planetary material could entrain and accelerate surface rocks and thus provide a mechanism for propelling SNC meteorites from the Martian surface. The difficult constraints that the impact origin hypothesis for SNC meteorities has to satisfy are that these meteorites are lightly to moderately shocked and yet were accelerated to speeds in excess of the Martian escape velocity. Two dimensional finite difference calculations demonstrate that at highly probable impact velocities, vapor plume jets are produced at oblique impact angles of 25 deg to 60 deg and have speeds as great as 20 km/sec. These plumes flow nearly parallel to the planetary surface. It is shown that upon impact of projectiles having radii of 0.1 to 1 km, the resulting vapor jets have densities of 0.1 to 1 g/cu cm. These jets can entrain Martian surface rocks and accelerate them to velocities 5 km/sec. It is suggested that this mechanism launches SNC meteorites to earth.

Okeefe, John D.↗
NASA NTRS1987

An investigation of oblique hypervelocity impact

This report describes the results of an investigation of phenomena associated with the oblique hypervelocity impact of spherical projectiles on multi-sheet aluminum structures. A model to be employed in the design of meteoroid and space debris protection systems for space structures is developed. The model consists of equations relating crater and perforation damage of a multi-sheet structure to parameters such as projectile size, impact velocity, and trajectory obliquity. The equations are obtained through a regression analysis of oblique hypervelocity impact test data. This data shows that the response of a multi-sheet structure to oblique impact is significantly different from its response to normal hypervelocity impact. It was found that obliquely incident projectiles produce ricochet debris that can severely damage panels or instrumentation located on the exterior of a space structure. Obliquity effects of high-speed impact must, therefore, be considered in the design of any structure exposed to the hazardous meteoroid and space debris environment.

Schonberg, William P.↗
NASA NTRS1988

An analysis of penetration and ricochet phenomena in oblique hypervelocity impact

An experimental investigation of phenomena associated with the oblique hypervelocity impact of spherical projectiles on multisheet aluminum structures is described. A model that can be employed in the design of meteoroid and space debris protection systems for space structures is developed. The model consists of equations that relate crater and perforation damage of a multisheet structure to parameters such as projectile size, impact velocity, and trajectory obliquity. The equations are obtained through a regression analysis of oblique hypervelocity impact test data. This data shows that the response of a multisheet structure to oblique impact is significantly different from its response to normal hypervelocity impact. It was found that obliquely incident projectiles produce ricochet debris that can severely damage panels or instrumentation located on the exterior of a space structure. Obliquity effects of high-speed impact must, therefore, be considered in the design of any structure exposed to the meteoroid and space debris environment.

Schonberg, William P.↗
NASA NTRS1988

Analysis of oblique hypervelocity impact phenomena

This paper describes the results of an experimental investigation of phenomena associated with the oblique hypervelocity impact of spherical projectiles on multisheet aluminum structures. A model that can be employed in the design of meteoroid and space debris protection systems for space structures is developed. The model consists of equations that relate crater and perforation damage of a multisheet structure to parameters such as projectile size, impact velocity, and trajectory obliquity. The equations are obtained through a regression analysis of oblique hypervelocity impact test data. This data shows that the response of a multisheet structure to oblique impact is significantly different from its response to normal hypervelocity impact. It was found that obliquely incident projectiles produce ricochet debris that can severely damage panels or instrumentation located on the exterior of a space structure. Obliquity effects of high-speed impact must, therefore, be considered in the design of any structure exposed to a meteoroid or space debris environement.

Schonberg, William P.↗