RF IMPEDANCE PROBE MEASUREMENTS OF IONOSPHERIC ELECTRON DENSITIES
Ionospheric electron density profiles obtained by the cw propagation technique and by rf impedance probe techniques
IONOSPHERIC ELECTRON DENSITY↗
SEARCH · Search NASA
Results for “RADIO ELECTRONICS”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Mechanical plan, rf test console, appendix j part of the final report
Mechanical plan of radio frequency test console
TEST EQUIPMENT↗
The temperature of intergalactic matter.
Intergalactic matter temperature parameters such as heating by cosmic ray ionization, dissipation of hydrodynamic turbulence, inelastic electron collision with H, He and He-ions
INTERGALACTIC MEDIUM↗
Estimate of electron density in the corona according to observations of solar radio emission otsenka elektronnoy plotnosti v korone po nablyudeniyam radioizlucheniya solntsa
Explore the source record for details and available documents.
Moiseyev, I. G.↗
Wave propagation in the magnetosphere of Jupiter
A systematic procedure is developed for identifying the spatial regimes of various modes of wave propagation in the Jupiter magnetosphere that may be encountered by flyby missions. The Clemmow-Mullaly-Allis (CMA) diagram of plasma physics is utilized to identify the frequency regimes in which different modes of propagation occur in the magnetoplasma. The Gledhill model and the Ioannidis and Brice model of the magnetoplasma are summarized, and configuration-space CMA diagrams are constructed for each model for frequencies from 10 Hz to 1 MHz. The distinctive propagation features, the radio noise regimes, and the wave-particle interactions are discussed. It is concluded that the concentration of plasma in the equatorial plane makes this region of vital importance for radio observations with flyby missions. Local radio noise around the electron cyclotron frequency will probably differ appreciably from its terrestrial counterpart due to the lack of field-line guidance. Hydromagnetic wave properties at frequencies near the ion cyclotron frequency and below will probably be similar to the terrestrial case.
Liemohn, H. B.↗
Extragalactic X-ray sources.
The extended X-ray sources associated with the Virgo, Perseus, and Coma clusters of galaxies can best be explained as a result of the Compton scattering of relativistic electrons (generated in the radio sources which are present in each of these clusters) on the microwave background radiation. The same physical process involving microwave infrared or optical photons generated in the nuclei of active galaxies may account for the more compact X-ray sources. Thermal bremsstrahlung of hot gas in clusters of galaxies is a less likely source of X-rays.
Brecher, K.↗
Fast solar electrons, interplanetary plasma and km-wave type-III radio bursts observed from the IMP-6 spacecraft
Explore the source record for details and available documents.
Alvarez, H.↗
Initial observations of the nightside ionosphere of Venus from Pioneer Venus Orbiter radio occultations
Results of radio occultation measurements of electron density profiles of the nightside ionosphere of Venus at solar zenith angles from 90 to 164 deg, obtained from the Pioneer Venus Orbiter, are reported. Data were derived from closed-loop S- and X-band signals received by the Deep Space Network upon ionospheric entry and exit of the spacecraft. Nightside electron density profiles are found to be rather uniform in the solar zenith angle range of from 95 to 107 deg, with peak electron densities ranging from 23,000 to 40,000/cu cm, while between 110 and 164 deg, profiles exhibit a high degree of variability and peak electron densities vary from 7,600 to 31,800/cu cm. A possible mechanism for the maintenance of the nightside Venus ionosphere during the long Venus night, which is consistent with the observed spatial and temporal variability of deep ionospheric electron density profiles, is proposed to be impact ionization by precipitating particles, although transport processes from the dayside may also be important.
Kliore, A. J.↗
The international cometary explorer mission to comet Giacobini-Zinner
The encounter, on September 11, 1985, between the International Cometary Explorer (ICE) and the comet Giacobini-Zinner, is described in detail. The primary goal of this encounter was to study the interaction between the solar wind and the comet. At the time of the encounter, the spacecraft was approximately 50 times farther from the earth than it was designed to go, making it difficult to recover data. The seven instruments on board ICE which were operational in this mission were the plasma electron, magnetometer, plasma waves, radio waves, plasma composition, low-energy cosmic ray, and energetic proton instruments. The encounter is depicted schematically, showing the times different regions were crossed. The spacecraft velocity vector, measured relative to the comet, made a 93 deg angle with respect to the plasma tail axis. The spacecraft crossed the center of the comet ion tail at approximately 1102 U.T. A cold, dense plasma was found near the center of the tail; at the very center was a temperature reading of only 13,000 K and a density of 670 electrons/cu cm. Alfven's model of comet tail formation was confirmed and it was found that water group ions are the dominant comet component. Pulses were detected which were attributed to dust particles hitting the spacecraft.
Von Rosenvinge, T. T.↗
The clumpy circumstellar medium around young supernova remnants
Each of the youngest supernova remnants known in the Milky Way, Cas A, Kepler's SNR, and Tycho's SNR, shows a different morphological structure caused by different conditions in the progenitor stars and their surroundings. In all three cases, however, the observed shells have a thickness of about 1/4 the radius, a sharp outer edge, and significant brightness irregularities. These features require that the circumstellar medium be highly clumped. To investigate the phenomenon, models of the expansion have been constructed using a one-dimensional spherical hydrodynamic code. As a supernova shock moves down the external density gradient of the star, material behind the shock begins to go into free expansion. Then as surrounding material is encountered a reverse shock moving back into the ejectum will be formed. Until the expansion has swept up about eight times the ejected mass when the situation can be considered as a point explosion in its surroundings, the dynamics are controlled by conditions between the shocks. The region is also where the synchrotron radio emission from relativistic electrons trapped in magnetic fields arises. Initial particles and fields are accelerated and amplified by eddy motion at the interface between the ejected and swept-up material and at the boundaries of clumps. Polarimetry shows that these SNR have a net radial orientation of their magnetic fields apparently from stretching by Rayleigh-Taylor instabilities at the contact surfaces. Without clumps the observed shell is much too narrow and steep on the inside.
Dickel, J. R.↗
Ulysses - An investigation of the polar regions of the heliosphere
This paper describes the Ulysses mission, a cooperative NASA/ESA mission for exploring the heliosphere within 1 to 2 AU of the sun. The nine instruments of the Ulysses spacecraft will collect information continuously, recording and compressing data for a playback through NASA's Deep Space Network. Prominent features of the Ulysses include the 1.65-m parabolic high-gain antenna pointing continuously toward earth, which will provide the earth-to-spacecraft communications link; the Radioisotope Thermoelectric Generator; and the 5.5-m radial boom which will provide an electromagnetically clean environment for certain experiments. Individual studies will include investigations of solar-wind plasma, solar-wind ion composition, cosmic dust, magnetic field, solar X-rays/cosmic gamma ray bursts, energetic-particle composition, low energy ions and electrons, cosmic rays/solar particles, radio and plasma waves, coronal plasma sounding, and gravitational waves.
Meeks, Willis G.↗
RF FEL for power beaming
The laser device components associated with operating a radio frequency-free electron laser (RF-FEL) for beaming power from Earth were designed and tested. Analysis of the power beaming system requirements reveals that the FEL, identified by NASA as the laser of choice, is the major subsystem requiring demonstration before proceeding further in proving the efficacy of laser power beaming. Rocketdyne has identified a series of low cost, low risk demonstrations which proceed sequentially, as follows: (1) a 1 kW proof-of-principle demonstration; (2) a 150 kW demonstration of beaming power to a satellite; and (3) a MW class demonstration of Earth to lunar surface power transmission. This sequence of events can be completed in 5.5 years at a cost of $188M, with key milestones each year.
Burke, Robert↗
Comparisons of peak ionosphere pressures at Mars and Venus with incident solar wind dynamic pressure
Radio occultation measurements of electron density profiles from Mariner 6 and 7, the Mariner 9 extended mission, and the U.S. Viking orbiters, together with model ion and electron temperature profiles, are used to derive thermal pressure profiles in the Mars ionosphere. The comparison of the Mars peak ionosphere pressure with the incident solar and dynamic pressure suggests that at solar maximum the Mars ionosphere, like that of Venus, should generally be sufficient to balance the incident solar wind pressure. At solar minimum, when the ionosphere is weakest and the solar wind dynamic pressure is highest, only the peak pressures at high solar zenith angles (SZAs) at Mars appear to be strong enough to balance the incident solar wind pressure. This is similar to the situation at Venus at solar minimum.
Zhang, M. H. G.↗
Low Power Silicon Germanium Electronics for Microwave Radiometers
Space-based radiometric observations of key hydrological parameters (e.g., soil moisture) at the spatial and temporal scales required in the post-2002 era face significant technological challenges. These measurements are based on relatively low frequency thermal microwave emission (at 1.4 GHz for soil moisture and salinity, 10 GHz and up for precipitation, and 19 and 37 GHz for snow). The long wavelengths at these frequencies coupled with the high spatial and radiometric resolutions required by the various global hydrology communities necessitate the use of very large apertures (e.g., greater than 20 m at 1.4 GHz) and highly integrated stable RF electronics on orbit. Radio-interferometric techniques such as Synthetic Thinned Array Radiometry (STAR), using silicon germanium (SiGe) low power radio frequency integrated circuits (RFIC), is one of the most promising technologies to enable very large non-rotating apertures in space. STAR instruments are composed of arrays of small antenna/receiving elements that are arranged so that the collecting area is smaller than an equivalent real aperture system, allowing very high packing densities for launch. A 20 meter aperture at L-band, for example, will require greater than 1000 of these receiving elements. SiGe RFIC's reduce power consumption enough to make an array like this possible in the power-limited environment of space flight. An overview of the state-of-the-art will be given, and current work in the area of SiGe radiometer development for soil moisture remote sensing will be discussed.
Doiron, Terence A.↗
The Software Element of the NASA Portable Electronic Device Radiated Emissions Investigation
NASA Langley Research Center's (LaRC) High Intensity Radiated Fields Laboratory (HIRF Lab) recently conducted a series of electromagnetic radiated emissions tests under a cooperative agreement with Delta Airlines and an interagency agreement with the FAA. The frequency spectrum environment at a commercial airport was measured on location. The environment survey provides a comprehensive picture of the complex nature of the electromagnetic environment present in those areas outside the aircraft. In addition, radiated emissions tests were conducted on portable electronic devices (PEDs) that may be brought onboard aircraft. These tests were performed in both semi-anechoic and reverberation chambers located in the HIRF Lab. The PEDs included cell phones, laptop computers, electronic toys, and family radio systems. The data generated during the tests are intended to support the research on the effect of radiated emissions from wireless devices on aircraft systems. Both tests systems relied on customized control and data reduction software to provide test and instrument control, data acquisition, a user interface, real time data reduction, and data analysis. The software executed on PC's running MS Windows 98 and 2000, and used Agilent Pro Visual Engineering Environment (VEE) development software, Common Object Model (COM) technology, and MS Excel.
Koppen, Sandra V.↗
Microsystem Cooler Development
A patented microsystem Stirling cooler is under development with potential application to electronics, sensors, optical and radio frequency (RF) systems, microarrays, and other microsystems. The microsystem Stirling cooler is most suited to volume-limited applications that require cooling below the ambient or sink temperature. Primary components of the planar device include: two diaphragm actuators that replace the pistons found in traditional-scale Stirling machines; and a micro-regenerator that stores and releases thermal energy to the working gas during the Stirling cycle. The use of diaphragms eliminates frictional losses and bypass leakage concerns associated with pistons, while permitting reversal of the hot and cold sides of the device during operation to allow precise temperature control. Three candidate microregenerators were custom fabricated for initial evaluation: two constructed of porous ceramic, and one made of multiple layers of nickel and photoresist in an offset grating pattern. An additional regenerator was prepared with a random stainless steel fiber matrix commonly used in existing Stirling machines for comparison to the custom fabricated regenerators. The candidate regenerators were tested in a piezoelectric-actuated test apparatus designed to simulate the Stirling refrigeration cycle. In parallel with the regenerator testing, electrostatically-driven comb-drive diaphragm actuators for the prototype device have been designed for deep reactive ion etching (DRIE) fabrication.
Moran, Matthew E.↗
Electro-optic Q-switch
An electro-optic Q-switch for generating sequence of laser pulses was disclosed. The Q-switch comprises a quadratic electro-optic material and is connected with an electronic unit generating a radio frequency wave with positive and negative pulses alternatively. The Q-switch is controlled by the radio frequency wave in such a way that laser pulse is generated when the radio frequency wave changes its polarity.
Zou, Yingyin↗
Using Quasiparticle Poisoning To Detect Photons
According to a proposal, a phenomenon associated with excitation of quasiparticles in certain superconducting quantum devices would be exploited as a means of detecting photons with exquisite sensitivity. The phenomenon could also be exploited to perform medium-resolution spectroscopy. The proposal was inspired by the observation that Coulomb blockade devices upon which some quantum logic gates are based are extremely sensitive to quasiparticles excited above the superconducting gaps in their leads. The presence of quasiparticles in the leads can be easily detected via the charge states. If quasiparticles could be generated in the leads by absorption of photons, then the devices could be used as very sensitive detectors of electromagnetic radiation over the spectral range from x-rays to submillimeter waves. The devices in question are single-Cooper-pair boxes (SCBs), which are mesoscopic superconducting devices developed for quantum computing. An SCB consists of a small superconducting island connected to a reservoir via a small tunnel junction and connected to a voltage source through a gate capacitor. An SCB is an artificial two-level quantum system, the Hamiltonian of which can be controlled by the gate voltage. One measures the expected value of the charge of the eigenvectors of this quantum system by use of a radio-frequency single-electron transistor. A plot of this expected value of charge as a function of gate voltage resembles a staircase that, in the ideal case, consists of steps of height 2 e (where e is the charge of one electron). Experiments have shown that depending on the parameters of the device, quasiparticles in the form of "broken" Cooper pairs present in the reservoir can tunnel to the island, giving rise to steps of 1 e. This effect is sometimes called "poisoning." Simulations have shown that an extremely small average number of quasiparticles can generate a 1-e periodic signal. In a device according to the proposal, this poisoning would be turned to advantage. Depending on the wavelength, an antenna or other component would be used to couple radiation into the reservoir, wherein the absorption of photons would break Cooper pairs, thereby creating quasiparticles that, in turn, would tunnel to the island, creating a 1-e signal. On the basis of conservative estimates of device parameters derived from experimental data and computational simulations that fit the data, it has been estimated that the noise equivalent power of a device according to the proposal could be as low as 6 10(exp -22) W/Hz(exp 1/2). It has also been estimated that the spectroscopic resolution (photon energy divided by increment of photon energy) of such a device in visible light would exceed 100.
Echternach, Pierre↗