Search NASA⌕ Search

SEARCH · Search NASA

Results for “REFRACTORY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

Isotopic studies of Mg, Fe, Mo, Ru and W in Fremdlinge from Allende refractory inclusions

This paper presents the first isotopic measurements, made with an ion microprobe, of Mg, Fe, Mo, Ru, and W in Fremdlinge and refractory metal nuggets from Allende meteorite. No non-mass-dependent deviations exceeding 1 percent from normal solar isotopic abundances were found for any of the elements analyzed, despite the unusual mineralogy of Fremdlinge and the extreme enrichment in refractory siderophile elements. It is concluded that the chemical, petrologic, and isotopic data on Fremdlinge are most plausibly interpreted in terms of the origin of Fremdlinge within the solar nebula.

Hutcheon, Ian D.↗

Experimental constraints on heating and cooling rates of refractory inclusions in the early solar system

The refractory inclusions in carbonaceous chondrites were the subject of considerable interest since their discovery. These inclusions contain minerals that are predicted to be some of the earliest condensates from the solar nebula, and contain a plethora of isotopic anomalies of unknown origin. Of particular interest are those coarse-grained inclusions that contain refractory metal particles (Fe, Ni, Pt, Ru, Os Ir). Experimental studies of these inclusions in terrestrial laboratories are, however, complicated because the dense particles tend to settle out of a molten or partially molten silicate material. Heating experiments in the Space Station technology and microgravity in order to observe the effects of metal nuggets (which may act as heterogeneous nucleation sites) on nucleation rates in silicate systems and to measure simultaneously the relative volatilization rate of siderophile and lithophile species. Neither experiment is possible in the terrestrial environment.

Boynton, W. V.↗

The search for refractory interplanetary dust particles from preindustrial aged Antarctic ice

In a study of refractory interplanetary dust particles, preindustrial-aged Antarctic ice samples have been collected, melted, and filtered to separate the particle load. Particles containing a significant amount of aluminum, titanium, and/or calcium were singled out for detailed SEM and STEM characterization. The majority of these particles are shown to be volcanic tephra from nearby volcanic centers. Six spherical aggregates were encountered that consist of submicron-sized grains of rutile within polycrystalline cristobalite. These particles are probably of terrestrial volcanic origin, but have not been previously reported from any environment. One aggregate particle containing fassaite and hibonite is described as a probable interplanetary dust particle. The constituent grain sizes of this particle vary from 0.1 to 0.3 microns, making it significantly more fine-grained than meteoritic calcium-aluminum-rich inclusions. This particle is mineralogically and morphologically similar to recently reported refractory interplanetary dust particles collected from the stratosphere, and dissimilar to the products of modern spacecraft debris.

Zolensky, Michael E.↗

The density distribution of refractory elements away from the Galactic plane

The density distributions of the three refractory elements Ti II, Ca II, and Fe II away from the Galactic plane are compared with the distribution of hydrogen and dust by examining plots of N s in b versus z. It is found that Ti II and Ca II are considerably more extended in z than the H I and dust and that Fe II has an intermediate extension. Although the results are strongly influenced by sample bias, the indicated exponential scale heights for the data sample are h(Ti II) not less than 2 kpc, h(Ca II) = 1 kpc, h(Fe II) = 0.5 kpc, H(H I) = 0.3 kpc, and h(E/B-V) = 0.1 kpc. Furthermore, it is demonstrated that Ti II and Ca II are much more smoothly distributed in space than the hydrogen or dust. The large scale heights for Ti II and Ca II and their smooth distributions are most easily understood as the effect of a mixture along the line of sight of two H I phases namely, a diffuse cloud phase, in which nearly all of the Ti and Ca are tied up in dust, and an intercloud medium, where refractory elements are less depleted. It is found that Ti II and Ca II mostly trace the smoothly distributed intercloud medium. The smoothness of the distributions of Ti II and Ca II makes them candidates for use as distance indicators.

Edgar, Richard J.↗

Stochastic evolution of refractory interstellar dust during the chemical evolution of a two-phase interstellar medium

The evolution course of refractoary interstellar dust during the chemical evolution of a two-phase interstellar medium (ISM) is studied using a simple model of the chemical evolution of ISM. It is assumed that, in this medium, the stars are born in molecular clouds, but new nucleosynthesis products and stellar return are entered into a complementary diffuse medium; the well-mixed matter of each interstellar phase is repeatedly cycled stochastically through the complementary phase and back. The dust is studied on a particle-by-particle bases as it is sputtered by shock waves in the diffuse medium, accretes an amorphous mantle of gaseous refractory atoms while its local medium joins the molecular cloud medium, and encounters the possibility of astration within molecular clouds. Results are presented relevant to the size spectrum of accreted mantles, its age spectrum and the distinction among its several lifetimes, depletion factors of refractory atoms in the diffuse gas, and isotopic anomalies.

Liffman, Kurt↗

Refractory solids in chondrites and comets: How similar

The grains of ice, dust, and organic material that came together to form the solar system have been preserved to differing degrees in the most primitive solar system bodies, asteroids and comets. The study of samples of asteroids (in the form of chondritic meteorites) reveals that the dust component was extensively altered by high-temperature events and processes in the early solar system, before it was aggregated into chondritic planetesimals. The nature of these high-temperature events and processes is not known, but the evidence of their operation is pervasive and unequivocal. Are the refractory particles in comets likely to be similar to these chondrite components. Probably not (except for the presolar carbonaceous grains in chondrites), because the chondritic components are products of severe thermal processing, and all imaginable energy sources that could have provided the heat tend to diminish with distance from the sun. Every indication is that comets formed at much greater radial distances than asteroids, so the particles they incorporated would have experienced less heating. The possibilities cannot be completely ruled out that comets, too, formed inside the present orbit of Jupiter, or that thermally-processed grains were able to diffuse great radial distances before being incorporated in accreting objects, but it is far more likely that most of the refractory grains in comets have been spared the extreme thermal processing that shaped the character of chondritic components.

Wood, John A.↗

Experimental studies of circumstellar, interstellar and interplanetary refractory grain analogs

Experimental techniques for studying the processes which occur during the life cycle of a refractory grain are reviewed. Consideration is given to the construction of a differentially-pumped beam-mass spectrometer which is expected to determine the relative stability of small clusters in the Fe-Mg-Si-O and Ca-Ti-Al-O systems as a function of temperature and pressure. Also, a smoke generator has been constructed to produce gram quantities of amorphous grains for use in thermal annealing and hydrous alteration studies of smokes containing Fe-Mg-Al-Ti-Ca-Si-O and Cl. Topics of the studies include the properties of grains produced in a flow condensation apparatus, the sorption efficiency of Si2O3 smokes for AR gas, the processing of ices containing refractory precursors such as SiH4 or Fe(CO)5 plus water, and the residue from 1 MeV bombardment and warming of an amorphous Fe-SiO smoke.

Nuth, J. A.↗

Refractory metal alloys and composites for space power systems

Results are presented on recent studies of refractory-metal-alloy and refractory-metal-composite technologies for space power systems, with emphasis on work performed at the Lewis Research Center in support of the Ground Engineering System (GES) for the SP-100 reactor. Special attention is given to the mechanical properties of alloys with compositions Nb-1Zr and Nb-0.1Zr-0.1C (the PWC-11 alloy) and to advanced fiber-reinforced composites. The results to date indicate that, for the GES at a power level of about 100 kWe, the PWC-11 has attractive creep properties that will extend the capabilities of the SP-100 reactor compared to a similar system fabricated from Nb-1Zr. On the other hand, tungsten-reinforced Nb-1Zr composites were found to provide a ten-fold and four-fold creep strength over Nb-1Zr and PWC-11, respectively, at 1400 to 1500 K.

Stephens, R.↗

High temperature refractory member with radiation emissive overcoat

A radiation type heat dissipator for use in a plasma engine is formed of a refractory metal layer upon which there is deposited a radiation emissive coating made of a high emissivity material such as zirconium diboride. The radiation emissive coating has a surface emissivity coefficient substantially greater than the emissivity coefficient of the refractory metal and thereby enhances the optical radiating efficiency of the heat dissipator.

Deininger, William D.↗

Hibonite-bearing microspherules - A new type of refractory inclusions with large isotopic anomalies

This paper presents petrographic description as well as results on the major- and trace-element chemistry and on Mg, Ca, and Ti isotopic compositions of three refractory inclusions, including 3413-1/31 inclusion from Lance and Murchison 7-228 and 7-753, the mineralogy of which is dominated by the oxide minerals spinel, hibonite, and perovskite. The microspherules examined seem to constitute a separate class of refractory inclusions, characterized by a distinct morphology and mineralogy; large excesses of Ca-48 and Ti-50, and Mg-26 depletions. It is suggested that this type of inclusions must have formed early, prior to the dilution of isotopic anomalies by mixing processes, and in an area characterized by excesses of Ca-48 and Ti-50, depletions of Mg-26, and a lack of Al-26.

Ireland, T. R.↗

Refractory inclusions with unusual chemical compositions from the Vigarano carbonaceous chondrite

Neutron activation was used to test ten inclusions, nine Vigarano and one from Leoville, for major and trace elements. Six Vigarano refractory inclusions have refractory element fractionations that are rare or absent in Allende inclusions. Vig 1623-11 has Th/La and Ir/Mo ratios that are lower than those of any Allende Group I or modified Group I inclusions, and Os/La, Ir/La, and Zr/Hf ratios that are among the lowest in those inclusions. The low Os/La, Ir/La, and Ir/Mo ratios seem to require nonrepresentative sampling of condensate phase in the nebula to a degree that is usual for Allende Group I and modified group I inclusions. The nature and origins of the different inclusions are discussed.

Sylvester, Paul J.↗

Chronopotentiometry of refractory metals, actinides and oxyanions in molten salts: A review

The applications of chronopotentiometry to the study of electrochemical behavior of three technologically important areas of refractory metals, actinides, and oxyanions in molten salts are critically reviewed. Chronopotentiometry is a very versatile diagnostic tool to understand the reaction mechanism of the electrode processes for the electrochemical reduction/oxidation of these electroactive species in molten salt solutions. Well adherent, compact, and uniformly thick coatings of refractory metals may be electrodeposited from their solutions in molten salts.

Bansal, Narottam P.↗

Thermal spray forming of refractory sample ampoule cartridges for single crystal growth space furnaces

A thermal spray process is being used to build up refractory metals and ceramics into a containment cartridge for high temperature, single crystal semiconductor growth experiments. This process uses high energy plasma inside a low pressure (100-200 torr) inert environment to apply layers of material onto a removable mandrel. A variety of materials are being characterized and evaluated against a demanding set of requirements, including high service temperature (1700 C), oxidation resistance, and resistance to liquid metal attack. Techniques to spray form refractory metals (tungsten, molybdenum, niobium, tantalum) and ceramics (alumina, boron nitride) are being developed in the Plasma Spray Cell at Marshall Space Flight Center. These plasma spray formed materials have been evaluated for mechanical properties, density, microstructure, and resistance to liquid metal attack. Forming techniques and the resultant mechanical and metallurgical properties will be presented.

Zimmerman, Frank↗

Thermal spray forming of refractory sample ampoule cartridges for single crystal growth space furnaces

A thermal spray process is being used to build up refractory metals and ceramics into a containment cartridge for high temperature, single crystal semiconductor growth experiments. This process uses high energy plasma inside a low pressure (100-200 torr) inert environment to apply layers of material onto a removable mandrel. A variety of materials are being characterized and evaluated against a demanding set of requirements, including high service temperature (1700 C), oxidation resistance, and resistance to liquid metal attack. Techniques to spray form refractory metals (tungsten, molybdenum, niobium, tantalum) and ceramics (alumina, boron nitride) are being developed in the Plasma Spray Cell at Marshall Space Flight Center. These plasma spray formed materials have been evaluated for mechanical properties, density, microstructure, and resistance to liquid metal attack. Forming techniques and the resultant mechanical and metallurgical properties are presented.

Zimmerman, Frank↗

Trace element compositions of spinel-rich refractory inclusions from the Murchison meteorite

Three spinel-rich, perovskite-bearing, pyroxene-rimmed, hibonite-free inclusions from the Murchison C2 chondrite have volatility controlled, modified group II REE patterns. Two have high Eu/Yb ratios, two have small positive Ce anomalies and one has high refractory siderophiles for a group II inclusion. Two additional spinel-rich inclusions have subchondritic Ce/La ratios and negative Eu and Yb anomalies, the Eu anomalies being larger than the Yb ones. One of these inclusions is enriched in La relative to all HREE and the other is enriched in HREE relative to all LREE except La, possibly suggesting the presence of an ultrarefractory component in the latter. One hibonite-rich inclusion has a group III REE pattern with a negative Ce anomaly. A calcium dialuminate-bearing inclusion known to have crystallized from a melt at 2100-1800K has a modified group II REE pattern, rather than a pattern which would be predicted from the evaporation expected from such a droplet, e.g., a group III or ultrarefractory pattern. Volatile element contents of these inclusions are among the lowest found in any refractory inclusions.

Yoneda, S.↗

Refractory Oxide Coatings on Sic Ceramics

Silicon carbide with a refractory oxide coating is potentially a very attractive ceramic system. It offers the desirable mechanical and physical properties of SiC and the environmental durability of a refractory oxide. The development of a thermal shock resistant plasma-sprayed mullite coating on SiC is discussed. The durability of the mullite/SiC in oxidizing, reducing, and molten salt environments is discussed. In general, this system exhibits better behavior than uncoated SiC. Areas for further developments are discussed.

Lee, Kang N.↗

The origin of refractory precursor components of chondrules

A percentage of all chondrules from carbonaceous chondrites are intermediate in major-element composition between the rare Ca,Al-rich chondrules and the more abundant ferromagnesian chondrules. Some of them possess fractionated REE and trace-element patterns similar to those in CAI's (Ca-Al-rich inclusions). The abundance patterns are controlled primarily by volatilities expected from a solar composition. On the basis of refractory lithophile fractionations, it is suggested that one of the refractory precursors of C chondrules is a condensate from the nebular gas or an evaporative residue of primitive dust clumps.

Misawa, K.↗

Forming Refractory Insulation On Copper Wire

Alternative insulating process forms flexible coat of uncured refractory insulating material on copper wire. Coated wire formed into coil or other complex shape. Wire-coating apparatus forms "green" coat on copper wire. After wire coiled, heating converts "green" coat to refractory electrical insulator. When cured to final brittle form, insulating material withstands temperatures above melting temperature of wire. Process used to make coils for motors, solenoids, and other electrical devices to be operated at high temperatures.

Setlock, J.↗