SEARCH · Search NASA

Results for “RIMS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

All sources NASA NTRS DOE OSTI

NASA NTRS1977

Size-dependence in the shape of fresh impact craters on the moon

The transition from small simple craters to large complex or modified craters is characterized by eleven changes in the shape of fresh lunar craters which occur within a diameter range of 10 to 30 km. In the present paper, seven ratio-level variations - those of rim-crest diameter with depth, rim height, flank width, rimwall slope, floor diameter, circularity, and rim-crest evenness - are defined for fresh-appearing craters from the new Apollo data and are expressed mathematically where practicable. These relations constitute a shape model for interpreting fresh craters on the moon. The size dependent changes reflect the occurrence of central peaks, rimwall terraces, and a flat floor within craters measuring 10 to 20 km in diameter.

Pike, R. J.↗

NASA NTRS1977

Nested-crater model of lunar ringed basins

We propose a model for the origin of impact-basin rings whereby the main topographic rim of a basin approximates the limit of excavation and inner rings approximate the rims of craters formed inside the transient crater by some perturbation in the cratering process. The cause of this complexity in transient cavities may be the presence of discontinuities in the target material. The second inward ring may have formed at the seismic discontinuity about 20 km deep in the lunar crust, and the third, innermost ring of a few large basins at the crust-mantle interface about 60 km deep. Slumping increased the original diameters of many rings and split some initially coherent rings into subsidiary or partial rings. Deformation outside the transient crater produced external arcs. This model differs from prevalent hypotheses of ring formation whereby an inner ring approximates the transient crater rim and major faulting of the flank produced the outer ring structures.

Wilhelms, D. E.↗

NASA NTRS1977

Origin of outer rings in lunar multi-ringed basins - Evidence from morphology and ring spacing

The reported investigation has the objective to examine both the morphology and morphometry of several of the freshest lunar basins including Orientale, Imbrium, Nectaris, Crisium, and Humorum, and to compare the characteristics of their three most prominent rings to features in smaller craters. On the basis of comparisons it is concluded that the outer basin ring forms within the region where significant structural uplift of the basin rim is to be expected. Therefore the formation of the outer ring scarp may be closely associated with structural uplift of the inner portion of the crater rim flank. According to a model suggested for the origin of the outer two rings, the cratering event formed two inner rings, a central peak ring, and an uplifted crater rim crest, with deposition of ejecta during the process.

Head, J. W.↗

NASA NTRS1978

Mineralogy, textures and mode of formation of a hibonite-bearing Allende inclusion

The origin of a Type A, hibonite-rich, coarse-grained inclusion is investigated with the electron microprobe and petrographic and scanning electron microscopes. The primary phases are hibonite, rhonite, Ti-Al-pyroxene, spinel, perovskite and melilite. Evidence for the crystallization of the bulk of the primary phases, hibonite and melilite, from a melt is lacking, suggesting that they may have condensed directly from a solar nebular gas instead. Primary phases were intensely altered during a later condensation event which deposited grossular, anorthite, nepheline and wollastonite in veins and cavities. Four or five condensate rims were deposited as successive layers on the outside of the inclusion. From inside to outside, they consist of perovskite + spinel, nepheline + anorthite, Ti-Al-pyroxene + diopside, hedenbergite + or - wollastonite + or - andradite and, finally, prisms of diopside and hedenbergite with wollastonite and andradite. Reverse zoning in melilite; alteration phases and rim phases, which are not stable condensates from a gas of solar composition; and details of the sequence of rim condensates all suggest that the entire condensation history of this inclusion was interrupted by changes in pressure and/or temperature and/or gas phase composition.

Allen, J. M.↗

NASA NTRS1978

How thick are lunar mare basalts

It is argued that De Hon's estimates of the thickness of lunar mare basalts, made by analyzing 'ghost' craters on mare surfaces, were inflated as the result of the crater morphometric data of Pike (1977) to reconstruct rim heights of degraded craters. Crater rim heights of 82 randomly selected highland craters of various states of degradation were determined, and median rim height was compared to that of corresponding fresh impact structures. Results indicate that the thickness estimates of De Hon may be reduced by a factor of 2, and that the total volume of mare basalt produced throughout lunar history could be as little as 1-2 million cubic kilometers. A survey of geochemical and petrographic evidence indicates that lateral transport of regolith components over distances of much greater than 10 km is relatively inefficient; it is suggested that vertical mixing of a highland substrate underlying the basaltic fill may have had a primordial role in generating the observed mare width distributions and high concentrations of exotic components in intrabasin regoliths.

Hoerz, F.↗

NASA NTRS1980

Mineralogy and petrography of HAL, an isotopically-unusual Allende inclusion

Results of a detailed mineralogical and textural study of the HAL (Hibonite ALlende) inclusion of the Allende meteorite, which has been found to exhibit no Mg-26 excesses despite very high Al-27/Mg-24 ratios and large fractionation effects with small nuclear effects in its Ca, are reported. The inclusion is found to consist of three up to 1-mm diameter hibonite crystals partially surrounded by a black rim resembling a devitrified glass and containing an anisotropic Al-Fe oxide, which is in turn surrounded by a 2-mm thick friable rim sequence consisting of five layers distinguishable by mineral composition. From the available evidence, it is concluded that each of the layers of the friable rim formed by the accretion of an assemblage of condensate grains rather than by the complete reaction of a HAL precursor with a nebular gas, thus explaining its unusual isotopic characteristics and supporting the conclusion that the solar nebular contained isotopically-distinct reservoirs.

Allen, J. M.↗

NASA NTRS1981

Tire/wheel concept

A tire and wheel assembly is disclosed in which a low profile pneumatic tire (having sidewalls which deflect inwardly under load) and a wheel (having a rim featuring a narrow central channel and extended rim flanges) form the combination. The extended rim flanges support the tire sidewalls under static and dynamic loading conditions to produce a combination particularly suited to aircraft applications.

Harper, P. M., Sr.↗

NASA NTRS1982

Chemical composition of HAL, an isotopically-unusual Allende inclusion

Samples of hibonite, black rim, and portions of friable rim from an unusual Allende inclusion, named HAL, were analyzed by INAA and RNAA for 37 major, minor, and trace elements. An unusually low amount of Ce was found in HAL, although it otherwise was highly enriched in REE compared to C1 chondrites. HAL is also depleted in Sr, Ba, U, V, Ru, Os, and Ir relative to other refractory elements. It is concluded that the distribution of REE between hibonite and rims was established when hibonite and other refractory minerals were removed at slightly different temperatures from a hot, oxidizing gas in which they previously coexisted as separate grains. Possible locations for the chemical and mass dependent isotopic fractionation are considered to be in ejecta from the low temperature helium-burning zone of a supernova and in the locally oxidizing environment generated by evaporation of interstellar grains of near-chondritic chemical composition.

Davis, A. M.↗

NASA NTRS1984

Fluvial erosion of impact craters: Earth and Mars

Geomorphic studies of impact structures in central Australia are being used to understand the complexities of fluvial dissection in the heavily cratered terrains of Mars. At Henbury, Northern Territory, approximately 12 small meteorite craters have interacted with a semiarid drainage system. The detailed mapping of the geologic and structural features at Henbury allowed this study to concentrate on degradational landforms. The breaching of crater rims by gullies was facilitated by the northward movement of sheetwash along an extensive pediment surface extending from the Bacon Range. South-facing crater rims have been preferentially breached because gullies on those sides were able to tap the largest amounts of runoff. At crater 6 a probable rim-gully system has captured the headward reaches of a pre-impact stream channel. The interactive history of impacts and drainage development is critical to understanding the relationships in the heavily cratered uplands of Mars. Whereas Henbury craters are younger than 4700 yrs. B.P., the Gosses Bluff structure formed about 130 million years ago. The bluff is essentially an etched central peak composed of resistant sandstone units. Fluvial erosion of this structure is also discussed.

Baker, V. R.↗

NASA NTRS1984

Dynamic thermal episodes in the protosolar nebula: Development of models from observations on CAI's

Evaluation of earlier observations indicated that layered rims on coarse-grained Allende CAI's were possibly the result of partial melting by ablation/drag-heating and reaction of CAI exteriors with a gas or gases of non-solar composition. Bunch and Chang reported the common occurrence of thin, fine-grained, matrix-like bands that at least partially surround rims of CAI's. Although material in these bands in general appears to be similar to matrix, SEM observations show them to be dissimilar in volatile element content, mineral composition, and grain morphology. Moreover, they appear to be related in time of formation with rim development and Na-metasomatism of CAI's. Observations indicate a short-lived but intense heating episode followed by radid cooling as the mechanism responsible for these CAI features.

Bunch, T. E.↗

NASA NTRS1985

Investigations of the Mars Cratered Terrain: Smooth Plains Boundary in the Eastern Equatorial Region

As part of an ongoing study to place geologic constraints on, and to interpret the origin of the ancient cratered terrain - smooth plains boundary on Mars, structural features in the eastern hemisphere were mapped, looking at wide-scale variations in aereal percentage of crater vocer and distinctive landforms. Maps and a digitized data set for graben, scarps, ridges and elongate plateaus in the eastern hemisphere were completed for 30 deg N to 30 deg. In the equatorial region, results indicate a marked change from the N oriented ridges north of the boundary to the NW orientations of those in the inter and intracrater plains south of the boundary. The WNW orientation of the boundary itself is matched by similar orientations of graben and scraps in the southern terrain. In order to determine whether outlying plateaus and isolated knobby hills found north of the boundary are formed from material of the ancient cratered terrain, the Viking 2 approach color data were used to discriminate surface materials in the eastern hemisphere. In the southern half of the Amenthes quadrange (MC-14), several correlations exist among surficial spectral reflectance and observed geologic units. Old terrain on the eastern rim of the Isidis basin is much redder than the smooth volcanic plains on either side of the rim, even though the plains unit east of the rim is located several kilometers higher than the plains on the floor of Isidis. Based on statistics derived from the color data, the plains within Isidis were found to differ from those north of the boundary zone.

Maxwell, T. A.↗

NASA NTRS1984

A study of structural concepts for ultralightweight spacecraft

Structural concepts for ultralightweight spacecraft were studied. Concepts for ultralightweight space structures were identified and the validity of heir potential application in advanced spacecraft was assessed. The following topics were investigated: (1) membrane wrinkling under pretensioning; (2) load-carrying capability of pressurized tubes; (3) equilibrium of a precompressed rim; (4) design of an inflated reflector spacecraft; (5) general instability of a rim; and (6) structural analysis of a pressurized isotensoid column. The design approaches for a paraboloidal reflector spacecraft included a spin-stiffened design, both inflated and truss central columns, and to include both deep truss and rim-stiffened geodesic designs. The spinning spacecraft analysis is included, and the two truss designs are covered. The performances of four different approaches to the structural design of a paraboloidal reflector spacecraft are compared. The spinning and inflated configurations result in very low total masses and some concerns about their performance due to unresolved questions about dynamic stability and lifetimes, respectively.

Miller, R. K.↗

NASA NTRS1984

Matrix material in type 3 chondrites - Occurrence, heterogeneity and relationship with chondrules

Variations between mean matrix compositions of individual type 3 ordinary chondrites are nearly fivefold, and partly reflect systematic differences between H, L, and LL matrices. Such variations are probably the result of a nebular separation of feldspathic material and ferromagnesian silicates. While compositions of chondrules and their matrix rims are normally unrelated, rim compositions are correlated with those of matrix lumps inside chondrules. Matrix lumps are as heterogeneous as chondrules, but mean chondrule and matrix compositions differ. Since bulk compositions of matrix lumps and rims have probably not changed significantly since their formation, the present matrix samples cannot represent typical chondrule precursor materials.

Scott, E. R. D.↗

NASA NTRS1983

Cold plasma distribution above a few thousand kilometers at high latitudes

Great advances with respect to the study of the earth's magnetosphere could be achieved in connection with the launch of the Dynamics Explorer (DE) 1 and 2 spacecraft. These advances were made possible partly because of the unique combination of coplanar orbits which simultaneously sample the low altitude ionospheric and atmospheric signature (DE-2) and the high altitude phenomena of the inner magnetosphere (DE-1). It was, thus, feasible to obtain new measurements of the coupling of plasmas and fields between these fundamentally important regions. One basic element of the coupling involves the interchange of low energy plasma between the ionosphere and magnetosphere. The flow characteristics of the low energy plasma are indicators of the magnetospheric and ionospheric electric fields which drive the current system. The Retarding Ion Mass Spectrometer (RIMS) instrument has been designed for conducting measurements regarding this plasma population. Attention is given to details regarding RIMS, an example RIMS orbit, plasma trough characteristics, and polar cap phenomena.

Chappell, C. R.↗

NASA NTRS1985

Rotatable electric cable connecting system

A cable reel assembly is described which is particularly adapted for, but not limited to, a system for providing electrical connection of power and data signals between an orbiter vehicle, such as a space shuttle, and a recovered satellite. The assembly is comprised of two mutually opposing ring type structures having 180 deg relative rotation with one of the structures being held in fixed position while the other structure is rotatable. Motor controlled berthing latches and umbilical cable connectors for the satellite are located on the rim of the rotatable ring structure. The electrical cable assembly is fed in two sections from the orbiter vehicle into the outer rim portion of the fixed ring structure where they are directed inwardly and attached to two concentrically coiled metal bands whose respective ends are secured to inner and outer post members of circular sets of guide pins located on opposing circular plate members, one rotatable and one fixed. The cable sections are fed out as three output cable sections through openings in the central portion of the circular plate of the rotatable ring structure where they are directed to the latches and connectors located on its rim.

Manges, D. R.↗

NASA NTRS1986

Gear mesh compliance modeling

A computer model has been constructed to simulate the compliance and load sharing in a spur gear mesh. The model adds the effect of rim deflections to previously developed state-of-the-art gear tooth deflection models. The effects of deflections on mesh compliance and load sharing are examined. The model can treat gear meshes composed to two external gears or an external gear driving an internal gear. The model includes deflection contributions from the bending and shear in the teeth, the Hertzian contact deformations, and primary and secondary rotations of the gear rims. The model shows that rimmed gears increase mesh compliance and, in some cases, improve load sharing.

Savage, M.↗

NASA NTRS1986

Observations of coherent transverse ion acceleration

DE-1 retarding ion mass spectrometer (RIMS) observations of transverse O(+) acceleration in the topside ionosphere are reported and analyzed. The operation and capabilities of RIMS are reviewed, and the data are presented graphically and characterized in detail. Torus or ring O(+) distributions with radii 10 km/s are observed, consistent with coherent transverse acceleration to 10-eV energies in the bulk-plasma reference frame, and conical hot tails at energies above the 50-eV RIMS maximum are noted. Possible mechanisms for these phenomena are discussed.

Moore, T. E.↗

NASA NTRS1987

Gear mesh compliance modeling

A computer model has been constructed to simulate the compliance and load sharing in a spur gear mesh. The model adds the effect of rim deflections to previously developed state-of-the-art gear tooth deflection models. The effects of deflections on mesh compliance and load sharing are examined. The model can treat gear meshes composed of two external gears or an external gear driving an internal gear. The model includes deflection contributions from the bending and shear in the teeth, the Hertzian contact deformations, and primary and secondary rotations of the gear rims. The model shows that rimmed gears increase mesh compliance and, in some cases, improve load sharing.

Savage, M.↗