Search NASA⌕ Search

SEARCH · Search NASA

Results for “Ray Tracing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

Paraboloidal X-ray telescope mirror for solar coronal spectroscopy

The telescope mirror for the X-ray Spectrograph Spectrometer Telescope System is a sixty degree sector of an extreme off-axis paraboloid of revolution. It was designed to focus a coronal region 1 by 10 arc seconds in size on the entrance slit of the spectrometer after reflection from the gold surface. This paper discusses the design, manufacture, and metrology of the mirror, the methods of precision mechanical metrology used to focus the system, and the mounting system which locates the mirror and has proven itself through vibration tests. In addition, the results of reflection efficiency measurements, alignment tolerances, and ray trace analysis of the effects of misalignment are considered.

Brown, W. A.↗

Ionospheric and satellite remote sensing of tornadic storms

Gravity waves associated with tornadoes were studied by using a ground-based ionospheric sounding system and satellite visible and infrared photographs of clouds associated with storms. Examples were chosen from gravity waves associated with a group of tornadoes and with isolated tornadic storms. Ray tracing computation was carried out to identify the location of the wave source. It is found that the wave sources of gravity waves associated with tornadoes were located on the squall line and/or isolated clouds where the tornado touched down one hour after the gravity waves were excited.

Hung, R. J.↗

Whistler propagation in the Jovian magnetosphere

The paper deals with computer ray tracing results for lightning-generated whistlers propagating in the Jovian magnetosphere. The waves are launched from a point on the Jovian surface at 66 degrees latitude and propagate approximately along L = 6 out to near the equatorial plane and into the Io plasma torus. The results clearly indicate that the whistlers propagate with very little dispersion until they reach the torus, at which time the dispersion starts to increase very rapidly. Good agreement between the computed and observed dispersions is established.

Menietti, J. D.↗

Gravity waves and GOES IR data study of an isolated tornadic storm on 29 May 1977

Enhanced convection-initiated gravity waves associated with an isolated tornado in the absence of a squall line are investigated. Ray-tracing computations based on data observed on May 29, 1977 indicated that the wave sources were located in north-central Oklahoma. Comparison with a radar echo map during the time period when the waves were excited showed that the waves were generated by an isolated cloud with enhanced convection. GOES infrared digital data during the time period from wave excitation to tornado touchdown were analyzed. Results showed that the cloud where the gravity waves were excited was characterized by both a very low temperature at the cloud top and a very high expansion rate of the cold cloud-top area. The lead time between the excitation of the gravity waves and the tornado touchdown is discussed in conjunction with the growth rate of the clouds associated with the tornado.

Hung, R. J.↗

Refraction of microwave signals by water vapor

Tropospheric water vapor causes a refractive path length effect which is typically 5-10% of the 'dry' tropospheric effect and as large as several meters at elevation angles below 5 deg. The vertical water vapor profile is quite variable, and measurements of intensive atmospheric parameters such as temperature and humidity limited to the surface do not adequately predict the refractive effect. It is suggested that a water vapor refraction model that is a function of the amount of precipitable water alone can be successful at low elevation angles. From an extensive study of numerical ray tracings through radiosonde balloon data, such a model has been constructed. The model predicts the effect at all latitudes and elevation angles between 2 and 10 deg to an accuracy of better than 4% (11 cm at 3 deg elevation angle).

Goldfinger, A. D.↗

Baseline mathematics and geodetics for tracking operations

Various geodetic and mapping algorithms are analyzed as they apply to radar tracking systems and tested in extended BASIC computer language for real time computer applications. Closed-form approaches to the solution of converting Earth centered coordinates to latitude, longitude, and altitude are compared with classical approximations. A simplified approach to atmospheric refractivity called gradient refraction is compared with conventional ray tracing processes. An extremely detailed set of documentation which provides the theory, derivations, and application of algorithms used in the programs is included. Validation methods are also presented for testing the accuracy of the algorithms.

James, R.↗

GOES infrared study of tornadic storms

Enhanced convection-initiated gravity waves associated with an isolated tornado in the absence of a squall line are investigated. Ray tracing computations based on data observed on May 29, 1977 indicated that the wave sources were located in north central Oklahoma. Comparison with a radar echo map during the time period when the waves were excited showed that the waves were generated by an isolated cloud with enhanced convection. GOES infrared digital data during the time period from wave excitation to tornado touchdown were analyzed. Results showed that the cloud where the gravity waves were excited was characterized by both a very low temperature at the cloud top and a very high expansion rate of the cold cloud tops area. The lead time between the excitation of the gravity waves and the tornado touchdown is discussed in conjunction with the growth rate of the clouds associated with the tornado.

Hung, R. J.↗

Effects of the specular Orbiter forward radiators on a typical Spacelab payload thermal environment

Orbiter radiators, having a specular reflection, must be considered when determining the design environment for payloads which can view the forward deployed radiators. Unlike most surfaces on the Orbiter, which reflect energy diffusely, the radiators are covered with a highly specular silverized Teflon material, with high emissivity, and have a concave contour, producing a local concentration of reflected energy towards the region of angle incidence. The combined effects of radiator specularity and geometry were analyzed using the Thermal Radiation Analysis System (TRASYS II), a specialized ray trace program, and a generalized Monte-Carlo-based thermal radiation program. Data given for a 0 deg payload inclination angle at orbital noon at 3.454 m indicate that the maximum total flux and average flux can increase 173% and 63%, respectively, when compared to diffuse radiators.

Turner, L. D.↗

A polarizer for vacuum ultraviolet

An MgF2 double Rochon prism, useful as a polarizer or analyzer in wavelengths longer than 1300A is described. Measurements of MgF2 transmission and of polarizer angular beam deviation from 1150 to 2900A are presented. The prism is comprised of 2.25 mm, MgF2 depolarizers, optically contacted. At normal incidence, a 4% transmission gain was measured from 6000 to 2200A, compared with air spaced elements. One depolarizer was vibrated to 40 g from 20 to 3500 Hz without deterioration in optical contact. Transmissions below 1400A are not good. In thin samples, surface loss is twice absorption loss in the range 1150 to 1500A. Refraction indices and a computer ray trace were used in processing photographic beam divergence data. If care is taken to remedy scattering effects, the prism is an efficient on-axis polarizer in the 1300 to 3000A range.

Steinmetz, D. L.↗

Computer prediction of dual reflector antenna radiation properties

A program for calculating radiation patterns for reflector antennas with either smooth analytic surfaces or with surfaces composed of a number of panels. Techniques based on the geometrical optics (GO) approach were used in tracing rays over the following regions: from a feed antenna to the first reflector surface (subreflector); from this reflector to a larger reflector surface (main reflector); and from the main reflector to a mathematical plane (aperture plane) in front of the main reflector. The equations of GO were also used to calculate the reflected field components for each ray making use of the feed radiation pattern and the parameters defining the surfaces of the two reflectors. These resulting fields form an aperture distribution which is integrated numerically to compute the radiation pattern for a specified set of angles.

Christodoulou, C.↗

New versions of old flow visualization systems

A small, modified Mach-Zehnder interferometer placed in series with a much larger schlieren optical system spanning the test section is examined. In one arm of the interferometer, light from the schlieren is focused through a pinhole and recollimating lens to produce a reference beam which interferes with the remaining object beam from the other arm. The object and reference beams are separated only over a small interval following the test section, and differential vibrations are greatly reduced. Color schlieren has technical, as well as aesthetic, advantages over black-and-white schlieren. Since each color is associated with a specific amount of refraction, quantitative evaluation of certain refractive-index fields becomes possible using very simple equations derived from ray trace theory. Rainbow schlieren of an acetylene flame, and the evaluated refractive index distribution are shown. Root-mean-square refractive index fluctuations in homogeneous, isotropic turbulence were determined using the rainbow schlieren, since these fluctuations determine the root-mean-square refraction, which is indicated by the overall color of the image.

Howes, W. L.↗

A theory of the Io phase asymmetry of the Jovian decametric radiation

An explanation of an asymmetry in the occurrence probability of the Io-dependent Jovian decametric radiation is proposed. Io generates stronger Alfven waves toward the south when it is in the northern part of the torus. This wave then generates decametric radiation in the northern ionosphere after it reflects in the southern ionosphere. The asymmetry then results from computing the propagation time of the alfven wave along this trajectory. The ray paths of the decameter radiation are calculated using a three dimensional ray tracing program in the Jovian ionosphere. Variations in the expected probability plots are computer for two models of the Jovian ionosphere and global magnetic field, as well as for several choices of the ratio of the radiated frequency to the X-mode cutoff frequency.

Hashimoto, K.↗

Ionospheric remote sensing of medium-scale gravity waves and tornadic storms

Gravity waves associated with severe storms are investigated on the basis of ionospheric sounding using a ground-based Doppler system. Reverse-group ray tracing computations are used to determine the origin of over 20 gravity waves detected within 800 km of Huntsville, Alabama in association with a group of tornadoes, isolated tornadoes in the presence of a squall line, and isolated tornadoes in the absence of a squall line. Gravity waves associated with tornadoes are found either to be generated by thunderstorms with enhanced convection embedded in a squall line, or in an isolated cloud with enhanced convection. The computed wave sources are observed in all cases to be located near the points where the tornadoes touched down more than an hour after wave excitation. Results show that gravity waves play an important role in troposphere-ionosphere coupling during times of intense convection associated with tornadic storm activity.

Hung, R. J.↗

Slab-geometry Nd:glass laser performance studies

It is noted that slab-geometry solid-state lasers potentially provide significant performance improvements relative to conventional rod-geometry lasers. Experimental measurements that use an Nd:glass test-bed slab laser are presented. A comparison is made between the results and computer-model predictions of the slab-geometry approach. The computer model calculates and displays the temperature and stress fields in the slab, and on the basis of these predicts birefringence and index-of-refraction distributions. The effect that these distributions have on optical propagation is determined in a polarization-sensitive ray-tracing section of the model. Calculations are also made of stress-induced surface curvature and the resulting focusing effects. The measurements are found to be in good agreement with the computer-model predictions. It is concluded that the slab configuration offers significant laser-performance advantages in comparison with the traditional rod-laser geometry.

Eggleston, J. M.↗

A pentahedral pyramidal concentrator design for space solar array

A truncated pentahedral pyramidal solar concentrator configuration has been selected as the most favorable candidate capable of providing low-cost multi-hundred-kilowatts (kW) solar array in low earth orbit. This concentrator has the advantages of: commonality for applications using either gallium arsenide (GaAs) or silicon (Si) solar cells, cost effectiveness, structural simplicity, and compatibility with the Shuttle. Results of concentrator optical ray trace, benefit of radiator, deployment mechanism, array power, and cost analysis are discussed.

Hsu, L.↗

Conceptual support design of the high resolution mirror assembly for the Advanced X-ray Astrophysics Facility (AXAF)

The performance goals of the Advanced X-ray Astrophysics Facility (AXAF) require that the Wolter I optics support system be insensitive to temperature fluctuations and the effects of gravity during ground testing. Previous work has shown that acceptable concepts are achievable but require much attention to design details. This paper discusses a new support system wherein each optic is held by a single circumfererential ring near its center of mass rather than a multipoint support as previously analyzed. The thermal sensitivity of this system is considerably lower than any concept yet studied. This advanced support concept allows the use of a wider variety of mateials and simple design details. Structural analysis utilizing the finite element method and optical ray-trace analysis are used to predict the system performance.

Cohen, L. M.↗

A theoretical study of plasmaspheric hiss generation

An investigation of the generation of plasmaspheric hiss by the whistler mode instability has been carried out. Using combined ray-tracing and growth rate calculations, the path-integrated growth rates of a large number of waves have been calculated using a distribution function. In general, the waves damp out before being magnetospherically reflected, or soon after. This is true of all the waves traced, independent of the distribution functions used for the energetic (resonant) electrons. Thus the growth rates are generally low, since the waves undergo few equatorial transits. A comparison of these results with observed spectra indicates that while some spectral characteristics are in qualitative agreement, there is a major discrepancy in the intensity levels.

Huang, C. Y.↗