Search NASA⌕ Search

SEARCH · Search NASA

Results for “SEEBECK EFFECT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

Effective mass and Fermi surface complexity factor from ab initio band structure calculations

The effective mass is a convenient descriptor of the electronic band structure used to characterize the density of states and electron transport based on a free electron model. While effective mass is an excellent first-order descriptor in real systems, the exact value can have several definitions, each of which describe a different aspect of electron transport. Here we use Boltzmann transport calculations applied to ab initio band structures to extract a density-of-states effective mass from the Seebeck Coefficient and an inertial mass from the electrical conductivity to characterize the band structure irrespective of the exact scattering mechanism. We identify a Fermi Surface Complexity Factor: N* v K* from the ratio of these two masses, which in simple cases depends on the number of Fermi surface pockets (N* v ) and their anisotropy K*, both of which are beneficial to high thermoelectric performance as exemplified by the high values found in PbTe. The Fermi Surface Complexity factor can be used in high-throughput search of promising thermoelectric materials.

36 MATERIALS SCIENCE↗

Superconducting and magneto-transport properties of BiS{sub 2} based superconductor PrO{sub 1-x}F{sub x}BiS{sub 2} (x = 0 to 0.9)

We report superconducting properties of PrO{sub 1-x}F{sub x}BiS{sub 2} compounds, synthesized by the vacuum encapsulation technique. The synthesized PrO{sub 1-x}F{sub x}BiS{sub 2} (x = 0.1, 0.3, 0.5, 0.7, and 0.9) samples are crystallized in a tetragonal P4/nmm space group. Both transport and DC magnetic susceptibility measurements showed bulk superconductivity below 4 K. The maximum T{sub c} is obtained for x = 0.7 sample. Under applied magnetic field, both T{sub c}{sup onset} and T{sub c} (ρ = 0) decrease to lower temperatures. We estimated highest upper critical field [H{sub c2}(0)] for PrO{sub 0.3}F{sub 0.7}BiS{sub 2} sample to be above 4 T (Tesla). The thermally activated flux flow activation energy (U{sub 0}) is estimated 54.63 meV in 0.05 T field for PrO{sub 0.3}F{sub 0.7}BiS{sub 2} sample. Hall measurement results showed that electron charge carriers are the dominating ones in these compounds. Thermoelectric effects (Thermal conductivity and Seebeck coefficient) data suggest strong electron-electron correlations in this material.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electronic structure and thermoelectric properties of pnictogen-substituted ASn{sub 1.5}Te{sub 1.5} (A = Co, Rh, Ir) skutterudites

Substituting group 14 and 16 elements on the pnictogen site in the skutterudite structure yields a class of valence-precise ternary AX{sub 1.5}Y{sub 1.5} compounds (A = Co, Rh, Ir, X = Sn, Ge, and Y = S, Se, Te), in which X and Y form an ordered sub-structure. Compared with unfilled binary skutterudites, pnictogen-substituted phases exhibit extremely low lattice thermal conductivity due to increased structural complexity. Here, we investigate the role of the transition metal species in determining the electronic structure and transport properties of ASn{sub 1.5}Te{sub 1.5} compounds with A = Co, Rh, Ir. Density functional calculations using fully ordered structures reveal semiconducting behavior in all three compounds, with the band gap varying from 0.2 to 0.45 eV. In CoSn{sub 1.5}Te{sub 1.5}, the electronic density of states near the gap is significantly higher than for A = Ir or Rh, leading to higher effective masses and higher Seebeck coefficients. Experimentally, Ir and Rh samples exhibit relatively large p-type carrier concentrations and degenerate semiconducting behavior. In contrast, CoSn{sub 1.5}Te{sub 1.5} shows mixed conduction, with n-type carriers dominating the Seebeck coefficient and light, high mobility holes dominating the Hall coefficient. zT values of up to 0.35 were obtained, and further improvement is expected upon optimization of the carrier concentration or with n-type doping.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Seebeck and thermal conductivity analysis in amorphous/crystalline {beta}-K{<_2}Bi{<_8}Se{<_13} nanocomposite materials.

In this work, ball milling is applied on {beta}-K{sub 2}Bi{sub 8}Se{sub 13} compounds in order to explore the potential of the process for the fabrication of nano-based material. Polycrystalline {beta}-K{sub 2}Bi{sub 8}Se{sub 13}, synthesized from melt, was ball milled under inert atmosphere. Powder x-ray diffraction showed a significantly increased disorder with ball milling time. TEM studies confirmed the presence of nanocrystalline material in an amorphous matrix, suggesting the development of crystalline/amorphous {beta}-K{sub 2}Bi{sub 8}Se{sub 13} nanocomposite material via ball milling process. Seebeck coefficient and thermal conductivity were analyzed based on the effective medium theory and show a significant contribution of a nanocrystalline phase.

36 MATERIALS SCIENCE↗

Synthesis and thermoelectric properties of RuO{sub 2} nanorods

We have explored the effect of the O/Ru ratio on the morphology and the Seebeck coefficient of RuO{sub 2} nanorods (space group P4{sub 2}/mnm) synthesized by reactive sputtering. At an O/Ru ratio of 1.69, a faceted surface is observed, while nanorod formation occurs at O/Ru ratios of 2.03 and 2.24. Using classical molecular dynamics with the potential parameters derived in this work, we show that volatile species enable nanorod formation. Based on ab initio calculations, two effects of the nanorod formation on the Seebeck coefficient are observed: (i) increase due to additional states in the vicinity of the Fermi level and (ii) decrease due to oxygen point defects (volatile species). These two competing effects give rise to a moderate increase in the Seebeck coefficient upon nanorod formation.

36 MATERIALS SCIENCE↗

Transport and optical properties of heavily hole-doped semiconductors BaCu{sub 2}Se{sub 2} and BaCu{sub 2}Te{sub 2}

Experimental and theoretical studies of the electronic and optical properties of orthorhombic BaCu{sub 2}Se{sub 2} and BaCu{sub 2}Te{sub 2} are reported. Experimental data include the electrical resistivity, Hall coefficient, Seebeck coefficient, thermal conductivity, and lattice constants for T{<=}300K, and optical transmission and diffuse reflectance data at room temperature. Nominally stoichiometric, polycrystalline samples form with hole concentrations inferred from Hall measurements of 2x10{sup 18} and 5x10{sup 19} cm{sup -3} near room temperature for the selenide and telluride, respectively. The corresponding mobilities are near 15 cm{sup 2} V{sup -1} s{sup -1} for both materials. Optical measurements reveal a transition near 1.8 eV in BaCu{sub 2}Se{sub 2}, while no similar feature was observed for BaCu{sub 2}Te{sub 2}. First principles calculations indicate both materials are direct or nearly direct gap semiconductors with calculated gaps near 1.0 eV and 1.3 eV for the telluride and selenide, respectively, and predict weak absorption below about 2 eV. Transport properties calculated from the electronic structure are also presented. - Graphical abstract: Combined experimental and theoretical study of orthorhombic BaCu{sub 2}Se{sub 2} and BaCu{sub 2}Te{sub 2} to assess potential for photovoltaic and thermoelectric applications. Highlights: > Comparative experimental and theoretical study of orthorhombic BaCu{sub 2}Se{sub 2} and BaCu{sub 2}Te{sub 2}. > Measured and calculated optical and transport properties. > Temperature dependence of lattice parameters and transport properties. > Hall and Seebeck coefficient measurements indicate heavy hole doping. > Good agreement between measured and modeled room temperature Seebeck coefficients.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Zintl phase Yb{sub 1-x}Ca{sub x}Cd{sub 2}Sb{sub 2} with tunable thermoelectric properties induced by cation substitution

It has been shown previously that the thermoelectric properties of the Zintl phase compound YbCd{sub 2}Sb{sub 2} can be finely tuned via Zn substitution at the Cd-site in the anionic (Cd{sub 2}Sb{sub 2}){sup 2-} framework. Here we report the results of the investigation of isoelectronic substitution of Yb by Ca. The p-type Yb{sub 1-x}Ca{sub x}Cd{sub 2}Sb{sub 2} (0.2{<=}x{<=}0.8) samples have been synthesized via a solid-state reaction followed by suitable cooling, annealing, grinding, and spark plasma sintering densification processes. In samples with x=0.2, 0.4, 0.5, 0.6, 0.8, the electrical conductivity, Seebeck coefficient, and thermal conductivity measurements have been carried out in the temperature range from 300 to 650 K. It is found that the Ca substitution effectively lowers the thermal conductivity for all samples at high temperature, while it significantly increases the Seebeck coefficient. As a result, the dimensionless figure of merit ZT of 0.96 has been attained at 650 K for samples with x=0.4, while the value is 0.78 for the unsubstituted YbCd{sub 2}Sb{sub 2}

36 MATERIALS SCIENCE↗

Enhanced room temperature electronic and thermoelectric properties of the dilute bismuthide InGaBiAs

We report room temperature electronic and thermoelectric properties of Si-doped In{sub 0.52}Ga{sub 0.48}Bi{sub y}As{sub 1-y} with varying Bi concentrations. These films were grown epitaxially on a semi-insulating InP substrate by molecular beam epitaxy. We show that low Bi concentrations are optimal in improving the conductivity, Seebeck coefficient, and thermoelectric power factor, possibly due to the surfactant effects of bismuth. We observed a reduction in thermal conductivity with increasing Bi concentration, which is expected because of alloy scattering. We report a peak ZT of 0.23 at 300 K.

36 MATERIALS SCIENCE↗

Anomalous enhancement of the thermoelectric power in gallium-doped p-(Bi{sub 1-x}Sb{sub x}){sub 2}Te{sub 3} single crystals

The effect of gallium on the temperature dependences (5 K {<=} T {<=} 300 K) of Seebeck coefficient {alpha}, electrical conductivity {sigma}, thermal conductivity k, and thermoelectric efficiency Z of mixed p-(Bi{sub 0.5}Sb{sub 0.5}){sub 2}Te{sub 3} semiconductor single crystals is studied. The hole concentration decreases upon gallium doping; that is, gallium causes a donor effect. The Seebeck coefficient increases anomalously, i.e., much higher than it should be at the detected decrease in the hole concentration. This leads to an enhancement of the thermoelectric power. The observed changes in the Seebeck coefficient indicate a noticeable gallium-induced change in the density of states in the valence band.

36 MATERIALS SCIENCE↗

Calculation of Nonlinear Thermoelectric Coefficients of InAs1-xSbx Using Monte Carlo Method

It was found that the nonlinear Peltier effect could take place and increase the cooling power density when a lightly doped thermoelectric material is under a large electrical field. This effect is due to the Seebeck coefficient enhancement from an electron distribution far from equilibrium. In the nonequilibrium transport regime, the solution of the Boltzmann transport equation in the relaxation-time approximation ceases to apply. The Monte Carlo method, on the other hand, proves to be a capable tool for simulation of semiconductor devices at small scales as well as thermoelectric effects with local nonequilibrium charge distribution. InAs1-xSb is a favorable thermoelectric material for nonlinear operation owing to its high mobility inherited from the binary compounds InSb and InAs. In this work we report simulation results on the nonlinear Peltier power of InAs1-xSb at low doping levels, at room temperature and at low temperatures. The thermoelectric power factor in nonlinear operation is compared with the maximum value that can be achieved with optimal doping in the linear transport regime.

Sadeghian, RB↗

Vortical effects in chiral band structures

The chiral vortical effect is a chiral anomaly-induced transport phenomenon characterized by an axial current in a uniformly rotating chiral fluid. It is well understood for Weyl fermions in high energy physics, but its realization in condensed matter band structures, including those of Weyl semimetals, has been controversial. In this work, we develop the Kubo response theory for electrons in a general band structure subject to space- and time-dependent rotation or vorticity relative to the background lattice. For continuum Hamiltonians, we recover the chiral vortical effect in the static limit and the transport or uniform limit when the fluid, strictly, is not a Fermi liquid. In the transport limit of a Fermi liquid, we describe an effect that we dub the gyrotropic vortical effect. The latter is governed by Berry curvature of the occupied bands while the former contains an additional contribution from the magnetic moment of electrons on the Fermi surface. The two vortical effects can be understood as kinematic analogs of the well-known chiral and gyrotropic magnetic effects in chiral band structures. As a result, we address recent controversies in the field and conclude by describing device geometries that exploit Ohmic or Seebeck transport to drive the vortical effects.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electronic structure and thermoelectric properties of nanostructured EuTi{sub 1-x}Nb{sub x}O{sub 3-{delta}} (x = 0.00; 0.02)

The thermoelectric properties of polycrystalline nanostructured EuTiO{sub 3-{delta}} samples are improved by a substitution of 2% Nb for Ti. The figure of merit (ZT) was measured to reach ZT(EuTi{sub 0.98}Nb{sub 0.02}O{sub 3-{delta}}) Almost-Equal-To 0.4 at T= 1040 K while ZT(EuTiO{sub 3-{delta}}) Almost-Equal-To 0.3 at the same temperature. X-ray photoelectron spectra reveal that the in-gap states at the Fermi level are more pronounced for the Nb-substituted samples, resulting in an improved power factor. The valence band peak below the Fermi level is sharply shaped, therefore fulfilling the condition for a large Seebeck coefficient. The specific porosity of the samples reduces the lattice thermal conductivity with a minor effect on the electron transport.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Influence of germanium nano-inclusions on the thermoelectric power factor of bulk bismuth telluride alloy

Nanocomposite thermoelectric compound of bismuth telluride (Bi{sub 2}Te{sub 3}) with 5 at. % germanium nano-inclusions was prepared via mechanically alloying and sintering techniques. The influence of Ge nano-inclusions and long duration annealing on the thermoelectric properties of nanostructured Bi{sub 2}Te{sub 3} were investigated. It was found that annealing has significant effect on the carrier concentration, Seebeck coefficient, and the power factor of the thermoelectric compound. The systematic heat treatment also reduced the density of donor type defects thereby decreasing the electron concentration. While the as-pressed nanocomposite materials showed n-type properties, it was observed that with the increase of annealing time, the nanocomposite gradually transformed to an abundantly hole-dominated (p-type) sample. The long duration annealing (∼500 h) resulted in a significantly enhanced electrical conductivity pertaining to the augmentation in the density and the structural properties of the sample. Therefore, a simultaneous enhancement in both electrical and Seebeck coefficient characteristics resulted in a remarkable increase in the thermoelectric power factor.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Proton irradiation effect on thermoelectric properties of nanostructured n-type half-Heusler Hf 0.25 Zr 0.75 NiSn 0.99 Sb 0.01

Here, thermoelectric properties of nanostructured half-Heusler Hf 0.25 Zr 0.75 NiSn 0.99 Sb 0.01 were characterized before and after 2.5 MeV proton irradiation. A unique high-sensitivity scanning thermal microprobe was used to simultaneously map the irradiation effect on thermal conductivity and Seebeck coefficient with spatial resolution less than 2 μm. The thermal conductivity profile along the depth from the irradiated surface reflects excellent agreement with the irradiation-induced damage profile from simulation. The Seebeck coefficient was unaffected while both electrical and thermal conductivities decreased by 24%, resulting in no change in thermoelectric figure of merit ZT. Reductions in thermal and electrical conductivities are attributed to irradiation-induced defects that act as scattering sources for phonons and charge carriers.

36 MATERIALS SCIENCE↗

Simulation of the thermoelectric effect in a multi-metallic superconducting cavity

Superconducting radio-frequency accelerating cavities made with different material layers, such as copper, Nb or Nb₃Sn, are susceptible to thermoelectric effects due to differences in Seebeck coefficients between the metals. A temperature gradient across the surfaces can drive thermoelectric currents, which may impact the cavity performance. A layered Cu/Nb/Nb3Sn single-cell cavity was tested with cryocoolers in 2022. Three heaters were mounted on the cavity surface at different locations and three single-axis cryogenic fluxgate magnetometers were attached close to the cavity equator. A linear increase in the magnetic field was measured while increasing the heaters' power. The cavity setup was analyzed with COMSOL and the results showed a trend similar to that observed in the experiment. This contribution details the approach chosen for the simulation and some of the challenges encountered.

Accelerator Physics↗

Evaluation of Doped-LaCrO3 ceramics for high temperature sensor applications

The main objective of this work was to investigate the applicability of the doped-LaCrO3 system for electrical interconnects and sensor applications at temperatures >800°C. Various A- and B-site doping strategies were investigated, and the effect on their electrical conductivity, Seebeck coefficient, and thermal coefficient of expansion were characterized up to 1500ºC. Solid-state, co-precipitation and sol gel methods were used to synthesize the compositions, and the chemical/thermal stability, microstructural evolution, sintering and grain growth kinetics were investigated for these compositions by XRD, SEM and Rietveld methods. The materials showing the greatest promise were included within thick film thermistor and thermocouple sensor designs that were tested to 1500ºC in various gas environments (various pO2 concentrations).

20 FOSSIL-FUELED POWER PLANTS↗

Conduction mechanism in boron carbide

Electrical conductivity, Seebeck-coefficient, and Hall-effect measurements have been made on single-phase boron carbides, B(1-x)C(x), in the compositional range from 0.1 to 0.2 X, and between room temperature and 1273 K. The results indicate that the predominant conduction mechanism is small-polaron hopping between carbon atoms at geometrically inequivalent sites.

Wood, C.↗