Search NASA⌕ Search

SEARCH · Search NASA

Results for “SHIFT PROCESSES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

Using failed supernovae to constrain the Galactic r-process element production

ABSTRACT Rapid neutron capture process (r-process) elements have been detected in a large fraction of metal-poor halo stars, with abundances relative to iron (Fe) that vary by over two orders of magnitude. This scatter is reduced to less than a factor of 3 in younger Galactic disc stars. The large scatter of r-process elements in the early Galaxy suggests that the r-process is made by rare events, like compact binary mergers and rare sub-classes of supernovae. Although being rare, neutron star mergers alone have difficulties to explain the observed enhancement of r-process elements in the lowest metallicity stars compared to Fe. The supernovae producing the two neutron stars already provide a substantial Fe abundance where the r-process ejecta from the merger would be injected. In this work we investigate another complementary scenario, where the r-process occurs in neutron star-black hole mergers in addition to neutron star mergers. Neutron star-black hole mergers would eject similar amounts of r-process matter as neutron star mergers, but only the neutron star progenitor would have produced Fe. Furthermore, a reduced efficiency of Fe production from single stars significantly alters the age–metallicity relation, which shifts the onset of r-process production to lower metallicities. We use the high-resolution [(20 pc)3/cell] inhomogeneous chemical evolution tool ‘ICE’ to study the outcomes of these effects. In our simulations, an adequate combination of neutron star mergers and neutron star-black hole mergers qualitatively reproduces the observed r-process abundances in the Galaxy.

79 ASTRONOMY AND ASTROPHYSICS↗

Dry Sintered Metal Coating of Halloysite Nanotubes

Halloysite nanotubes (HNTs) are a naturally-occurring aluminosilicate whose dimensions measure microns in length and tens of nanometers in diameter. Bonding defects between the alumina and silica lead to net negative and positive charges on the exterior and interior lumen, respectively. HNTs have been shown to enhance the material properties of polymer matrices and enable the sustained release of loaded chemicals, drugs, and growth factors. Due to the net charges, these nanotubes can also be readily coated in layered-depositions using the HNT exterior lumen’s net negative charge as the basis for assembly. These coatings are primarily done through wet chemical processes, the majority of which are limited in their use of desired chemicals, due to the polarity of the halloysite. Furthermore, this restriction in the type of chemicals used often requires the use of more toxic chemicals in place of greener options, and typically necessitates the use of a significantly longer chemical process to achieve the desired coating. In this study, we show that HNTs can be coated with metal acetylacetonates—compounds primarily employed in the synthesis of nanoparticles, as metal catalysts, and as NMR shift reagents—through a dry sintering process. This method was capable of thermally decaying the metal acetylacetonate, resulting in a free positively-charged metal ion that readily bonded to the negatively-charged HNT exterior, resulting in metallic coatings forming on the HNT surface. Our coating method may enable greater deposition of coated material onto these nanotubes as required for a desired application. Moreover, the use of chemical processes using toxic chemicals is not required, thus eliminating exposure

36 MATERIALS SCIENCE↗

Riverine bacterioplankton and phytoplankton assembly along an environmental gradient induced by urbanization

In the Anthropocene, human activities are intensifying stresses on biological communities across ecosystems. Knowledge on how environmental changes influence microbial community dynamics is crucial but currently limited. Here we unraveled ecological processes generating distribution patterns of bacterioplankton and phytoplankton communities in a river draining an urbanizing watershed in southern China. In this ecosystem, longitudinal environmental heterogeneity and directional flow potentially have counteracting effects on planktonic community assembly. Using simultaneously multiple approaches, we showed that the observed compositional patterns result from an interplay of stochastic and deterministic processes, indicating that dispersal via fluvial connectivity could not override local selective pressures. Successional shifts in the relative importance of the above processes were associated with trends in climatic factors. High diversity was observed at the intermediate levels of ecological processes alongside intense inter-species interactions maintained by a few keystone taxa. Altogether, interactions between climatic conditions, landscape and hydrology control plankton community dynamics.

54 ENVIRONMENTAL SCIENCES↗

Design and Operation of a Multi-Bed Catalytic Micro-Reactor for the Study of Co-Processing of Bio-Oils with VGO

An industry wide shift from fossil-based fuel to renewable fuel sources including biomass, municipal waste, and plastics will require new process monitoring methods to minimize transitional risks including off specification product formation and catalyst deactivation. This project aims to provide a machine learning based process monitoring tool composed of online, slipstream mass spectra for use in biomass refineries and co-processing in existing refineries allowing operators to monitor product qualities and adjust process conditions accordingly. In order to maximize the robustness of the tool, large volumes of data must be collected to fine tune model parameters which consists of both micro and pilot scale mass spectral data. Micro-scale data is collected with a multi-tube micro-reactor housing up to six catalysts in horizontal beds, coupled with a molecular beam mass spectrometer. A pyrolizer equipped with an auto-sampler streamlines the micro-scale data collection process. This type of pyrolizer/micro-reactor configuration does not exist on the market, and therefore had to be created for the purposes of this project. The design and commissioning of this reactor will be presented in detail. This reactor set-up is highly flexible and increases throughput of analysis. For catalyst testing, each bed can be individually selected simply by turning valves. For catalyst reduction and regeneration, simultaneous flow through all six beds is used. The reproducibility of the system was first assessed with whole biomass pyrolysis along with pyrolysis of calibration standards. Initial work on this system evaluated two FCC catalysts, equilibrium catalyst (E-cat), and a proprietary catalyst from Johnson Matthey specifically design for co-processing of bio-oil with vacuum gas oil (VGO). This work used model compounds and VGO which illuminated differences in products produced by the catalysts.

biomass↗

Competition between the tensor light shift and nonlinear Zeeman effect

Many precision measurements (e.g., in spectroscopy, atomic clocks, quantum-information processing, etc.) suffer from systematic errors introduced by the light shift. In our experimental configuration, however, the tensor light shift plays a positive role enabling the observation of spectral features otherwise masked by the cancellation of the transition amplitudes and creating resonances at a frequency unperturbed either by laser power or beam inhomogeneity. These phenomena occur thanks to the special relation between the nonlinear Zeeman and light shift effects. The interplay between these two perturbations is systematically studied and the cancellation of the nonlinear Zeeman effect by the tensor light shift is demonstrated.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A novel chemical looping partial oxidation process for thermochemical conversion of biomass to syngas

The Biomass-to-Syngas (BTS) chemical looping process is an advanced thermochemical biomass conversion process for the production of sustainable fuels and chemicals. The BTS process is novel in that it converts biomass feedstock to high purity syngas with adjustable H 2 :CO molar ratio without needing an air separation unit (ASU), a tar reformer, a steam reformer, or a water-gas-shift (WGS) reactor. In the BTS process, biomass feedstock is partially oxidized to produce syngas by oxygen carriers in a reducer that is operated in a co-current gas-solid moving bed contact mode. The reduced oxygen carriers are regenerated in a fluidized bed combustor via the oxidation reaction with air. The BTS process uses the iron-titanium composite metal oxide (ITCMO) material as the oxygen carrier, which is capable of cracking the volatiles produced in biomass pyrolysis as well as regulating the syngas composition. The co-current moving bed reducer eliminates back-mixing, channeling, or bypassing of solid and gas reactants, resulting in a syngas composition that is close to the thermodynamic equilibrium. In this paper, the rationale of a successful BTS process is discussed along with the thermodynamic characteristics of the ITCMO oxygen carrier, that can effectively react with a woody biomass feedstock, analyzed based on an ASPEN Plus model. Bench scale moving bed reducer experiments are presented, indicating the conversion of wood pellets to syngas with a H 2 :CO ratio of 2, which is suitable for methanol or liquid fuel synthesis. The gas and solid composition produced in the bench scale reducer matches the prediction from the ASPEN Plus thermodynamic model. Furthermore, this model is further used to analyze the performance of the BTS process under autothermal conditions for methanol production, with a comparison with a baseline indirectly heated gasification process.

09 BIOMASS FUELS↗

Light-induced hysteresis and recovery behaviors in photochemically activated solution-processed metal-oxide thin-film transistors

In this report, photo-induced hysteresis, threshold voltage (V{sub T}) shift, and recovery behaviors in photochemically activated solution-processed indium-gallium-zinc oxide (IGZO) thin-film transistors (TFTs) are investigated. It was observed that a white light illumination caused negative V{sub T} shift along with creation of clockwise hysteresis in electrical characteristics which can be attributed to photo-generated doubly ionized oxygen vacancies at the semiconductor/gate dielectric interface. More importantly, the photochemically activated IGZO TFTs showed much reduced overall V{sub T} shift compared to thermally annealed TFTs. Reduced number of donor-like interface states creation under light illumination and more facile neutralization of ionized oxygen vacancies by electron capture under positive gate potential are claimed to be the origin of the less V{sub T} shift in photochemically activated TFTs.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Characterization and correction of charge-induced pixel shifts in DECam

Interaction of charges in CCDs with the already accumulated charge distribution causes both a flux dependence of the point-spread function (an increase of observed size with flux, also known as the brighter/fatter effect) and pixel-to-pixel correlations of the Poissonian noise in flat fields. We describe these effects in the Dark Energy Camera (DECam) with charge dependent shifts of effective pixel borders, i.e. the Antilogus et al. (2014) model, which we fit to measurements of flat-field Poissonian noise correlations. The latter fall off approximately as a power-law r -2.5 with pixel separation r, are isotropic except for an asymmetry in the direct neighbors along rows and columns, are stable in time, and are weakly dependent on wavelength. They show variations from chip to chip at the 20% level that correlate with the silicon resistivity. The charge shifts predicted by the model cause biased shape measurements, primarily due to their effect on bright stars, at levels exceeding weak lensing science requirements. We measure the flux dependence of star images and show that the effect can be mitigated by applying the reverse charge shifts at the pixel level during image processing. Differences in stellar size, however, remain significant due to residuals at larger distance from the centroid.

79 ASTRONOMY AND ASTROPHYSICS↗

COMPASS-FME Synoptic Site Characterization

This dataset contains soil biogeochemical and physicochemical characterization data for the COMPASS-FME synoptic sites.This dataset also contains data for the paper Patel et al. 2025 "Transition zones at the changing coastal terrestrial-aquatic interface", https://doi.org/10.1029/2025JG008978.Coastal soils are a significant but highly uncertain component of global biogeochemical cycles. These systems experience unique spatial and temporal variability in biogeochemical processes, driven by wetland-to-upland gradients and hydrological fluctuations. We studied drivers of coastal soil variability (a) at regional scales and (b) across transects from upland forest to wetland, in two contrasting regions — Lake Erie, a freshwater lacustrine system, and Chesapeake Bay, a saltwater estuarine system. Salinity-related analytes were a key driver of soil variability, not just in the saltwater system, but surprisingly, also in the freshwater system. We had hypothesized linear trends in biogeochemical parameters along the TAI – however, contrary to expectations, transition soils were not consistently intermediate between upland and wetland endmembers; the non-monotonic trends of carbon, phosphorus, iron along our transects suggest that these are key analytes to study in our regions. Rapidly changing soil factors across coastal gradients provide insights into which soil processes may act as precursors to ecosystem shifts. Our comprehensive soil characterization across the coastal transects provides essential data for mechanistic modeling of ecosystem dynamics.The data are provided as processed, csv files. Raw data and processing scripts can be accessed on GitHub (https://github.com/COMPASS-DOE/cmps-soil_characterization).A note on the nomenclature: the experimental design represents three points along the coastal gradient -- upland, transition, and wetland. "wetland" is referred to as "marsh" in the corresponding paper. The two terms can be used interchangeably for the sites in this study.

54 ENVIRONMENTAL SCIENCES↗

Amplified Spontaneous Emission from Electron–Hole Quantum Droplets in Colloidal CdSe Nanoplatelets

Two-dimensional cadmium selenide nanoplatelets (NPLs) exhibit large absorption cross sections and homogeneously broadened band-edge transitions that offer utility in wide-ranging optoelectronic applications. Here, we examine the temperature-dependence of amplified spontaneous emission (ASE) in 4- and 5-monolayer thick NPLs and show that the threshold for close-packed (neat) films decreases with decreasing temperature by a factor of 2-10 relative to ambient temperature owing to extrinsic (trapping) and intrinsic (phonon-derived line width) factors. Interestingly, for pump intensities that exceed the ASE threshold, we find development of intense emission to lower energy in particular provided that the film temperature is <= 200 K. For NPLs diluted in an inert polymer, both biexcitonic ASE and low-energy emission are suppressed, suggesting that described neat-film observables rely upon high chromophore density and rapid, collective processes. Transient emission spectra reveal ultrafast red-shifting with the time of the lower energy emission. Taken together, these findings indicate a previously unreported process of amplified stimulated emission from polyexciton states that is consistent with quantum droplets and constitutes a form of exciton condensate. For studied samples, quantum droplets form provided that roughly 17 meV or less of thermal energy is available, which we hypothesize relates to polyexciton binding energy. Polyexciton ASE can produce pump-fluence-tunable red-shifted ASE even 120 meV lower in energy than biexciton ASE. Finally, our findings convey the importance of biexciton and polyexciton populations in nanoplatelets and show that quantum droplets can exhibit light amplification at significantly lower photon energies than biexcitonic ASE.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

CO{sub 2} capture from simulated syngas via cyclic carbonation/calcination for a naturally occurring limestone: pilot-plant testing

Experiments were performed using a dual fluidized bed reactor system, operated in a batch mode, in order to investigate the effects of steam and simulated syngas on CO{sub 2} capture and sorbent conversion efficiency for a naturally occurring Polish calcitic limestone. In addition, the effect of high partial pressures of CO{sub 2} on the calcination process was examined using either oxygen-enriched air or oxy-fuel combustion in the calciner. As expected, calcination under oxy-fuel conditions resulted in decreased carbonation conversion due primarily to particle sintering and pore pluggage. On average there was a decrease in carbonation conversion of approximately 36.5 and 33.4% for carbonation with steam and steam/simulated syngas, respectively, compared to similar experiments using oxygen-enriched air. However, during the carbonation of the limestone with steam present in the feed gas, it was observed that the high CO{sub 2} capture efficiency period was significantly extended compared to carbonation with only CO{sub 2} present. This resulted in increased CaO conversion from approximately 16.1 to 29.7% for the initial carbonation cycle. A further increase in carbonation conversion from 29.7 to 46.9%, was also observed when simulated syngas conditions (CO, H{sub 2}) were used in the carbonator. Analysis of the outlet gases also confirmed that the calcined limestone catalyzes the water gas shift reaction, which we believe results in enhanced CO{sub 2} concentration levels at the grain surfaces of the sorbent.

01 COAL, LIGNITE, AND PEAT↗

Carbon Molecular Sieve Membrane as a True One Box Unit for Large Scale Hydrogen Production

IGCC coal-fired power plants show promise for environmentally-benign power generation. In these plants coal is gasified to syngas then processed in a water gas-shift (WGS) reactor to maximize the hydrogen/CO 2 content. The gas stream can then be separated into a hydrogen rich stream for power generation and/or further purified for sale as a chemical and a CO 2 rich stream for the purpose of carbon capture and storage (CCS). Today, the separation is accomplished using conventional absorption/desorption processes with post CO 2 compression. However, significant process complexity and energy penalties accrue with this approach, accounting for ~20% of the capital cost and ~27% parasitic energy consumption. Ideally, a one-box process is preferred in which the syngas is fed directly to the WGS reactor without gas pre-treatment, converting the CO to hydrogen in the presence of H 2 S and other impurities and delivering a clean hydrogen product for power generation or other uses. The development of such a process is the primary goal of this project.

01 COAL, LIGNITE, AND PEAT↗

HALO GAS CROSS SECTIONS AND COVERING FRACTIONS OF Mg II ABSORPTION SELECTED GALAXIES

We examine halo gas cross sections and covering fractions, f{sub c} , of intermediate-redshift Mg II absorption selected galaxies. We computed statistical absorber halo radii, R{sub x}, using current values of dN/dz and Schechter luminosity function parameters, and have compared these values to the distribution of impact parameters and luminosities from a sample of 37 galaxies. For equivalent widths W{sub r}(2796) {>=} 0.3 A, we find 43 {<=} R{sub x} {<=} 88 kpc, depending on the lower luminosity cutoff and the slope, {beta}, of the Holmberg-like luminosity scaling, R {proportional_to} L{sup {beta}}. The observed distribution of impact parameters, D, are such that several absorbing galaxies lie at D>R{sub x} and several non-absorbing galaxies lie at D < R{sub x}. We deduced that f{sub c} must be less than unity and obtain a mean of <f{sub c} > {approx} 0.5 for our sample. Moreover, the data suggest that halo radii of Mg II absorbing galaxies do not follow a luminosity scaling with {beta} in the range of 0.2-0.28, if f{sub c} = 1 as previously reported. However, provided f{sub c} {approx} 0.5, we find that halo radii can remain consistent with a Holmberg-like luminosity relation with {beta} {approx_equal} 0.2 and R{sub *}= R{sub x}/{radical}(f{sub c}){approx}110 kpc. No luminosity scaling ({beta} = 0) is also consistent with the observed distribution of impact parameters if f{sub c} {<=} 0.37. The data support a scenario in which gaseous halos are patchy and likely have non-symmetric geometric distributions about the galaxies. We suggest that halo gas distributions may not be governed primarily by galaxy mass/luminosity but also by stochastic processes local to the galaxy.

79 ASTRONOMY AND ASTROPHYSICS↗

A high-voltage rechargeable magnesium-sodium hybrid battery

Growing global demand of safe and low-cost energy storage technology triggers strong interests in novel battery concepts beyond state-of-art Li-ion batteries. Here we report a high-voltage rechargeable Mg–Na hybrid battery featuring dendrite-free deposition of Mg anode and Na-intercalation cathode as a low-cost and safe alternative to Li-ion batteries for large-scale energy storage. A prototype device using a Na3V2(PO4)3 cathode, a Mg anode, and a Mg–Na dual salt electrolyte exhibits the highest voltage (2.60 V vs. Mg) and best rate performance (86% capacity retention at 10C rate) among reported hybrid batteries. Synchrotron radiation-based X-ray absorption near edge structure (XANES), atomic-pair distribution function (PDF), and high-resolution X-ray diffraction (HRXRD) studies reveal the chemical environment and structural change of Na3V2(PO4)3 cathode during the Na ion insertion/deinsertion process. XANES study shows a clear reversible shift of vanadium K-edge and HRXRD and PDF studies reveal a reversible two-phase transformation and V–O bond length change during cycling. The energy density of the hybrid cell could be further improved by developing electrolytes with a higher salt concentration and wider electrochemical window. This work represents a significant step forward for practical safe and low-cost hybrid batteries.

Li, Yifei↗

Higher-order phase shift reconstruction approach

Purpose: Biological soft tissues encountered in clinical and preclinical imaging mainly consists of atoms of light elements with low atomic numbers and their elemental composition is nearly uniform with little density variation. Hence, x-ray attenuation contrast is relatively poor and cannot achieve satisfactory sensitivity and specificity. In contrast, x-ray phase-contrast provides a new mechanism for soft tissue imaging. The x-ray phase shift of soft tissues is about a thousand times greater than the x-ray absorption over the diagnostic x-ray energy range, yielding a higher signal-to-noise ratio than the attenuation contrast counterpart. Thus, phase-contrast imaging is a promising technique to reveal detailed structural variation in soft tissues, offering a high contrast resolution between healthy and malignant tissues. Here the authors develop a novel phase retrieval method to reconstruct the phase image on the object plane from the intensity measurements. The reconstructed phase image is a projection of the phase shift induced by an object and serves as input to reconstruct the 3D refractive index distribution inside the object using a tomographic reconstruction algorithm. Such x-ray refractive index images can reveal structural features in soft tissues, with excellent resolution differentiating healthy and malignant tissues. Methods: A novel phase retrieval approach is proposed to reconstruct an x-ray phase image of an object based on the paraxial Fresnel-Kirchhoff diffraction theory. A primary advantage of the authors' approach is higher-order accuracy over that with the conventional linear approximation models, relaxing the current restriction of slow phase variation. The nonlinear terms in the autocorrelation equation of the Fresnel diffraction pattern are eliminated using intensity images measured at different distances in the Fresnel diffraction region, simplifying the phase reconstruction to a linear inverse problem. Numerical experiments are performed to demonstrate the accuracy and stability of the proposed approach. Results: The proposed reconstruction formula is a generalization of the transport of intensity equation (TIE). It has the second-order accuracy compared to the linear model used in the conventional phase retrieval approach. The numerical experiments demonstrate that the accuracy and stability of the proposed phase reconstruction method outperforms the TIE-based reconstruction method. Conclusions: A novel approach has been proposed to retrieve an x-ray phase shift image induced by an object from intensity images measured at different distances in the Fresnel diffraction region. The authors' approach has the second-order accuracy and is able to retrieve the phase shift of an object stably, overcoming the restriction of slow phase variation assumed by the conventional phase retrieval techniques.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Connecting the dots: Tracking galaxy evolution using constant cumulative number density at 3 ≤ z ≤ 7

Using the cosmological smoothed particle hydrodynamical code GADGET-3, we make a realistic assessment of the technique of using constant cumulative number density as a tracer of galaxy evolution at high redshift. We find that over a redshift range of 3 ≤ z ≤ 7 one can on average track the growth of the stellar mass of a population of galaxies selected from the same cumulative number density bin to within ∼0.20 dex. Over the stellar mass range that we probe (10{sup 10.4}⩽M{sub s}/M{sub ⊙}⩽10{sup 10.8} at z = 3 and 10{sup 8.5}⩽M{sub s}/M{sub ⊙}⩽10{sup 9.6} at z = 7), one can reduce this bias by selecting galaxies based on an evolving cumulative number density. We find that this cumulative number density evolution exhibits a trend toward higher values which can be quantified by simple linear formulations of −0.10Δz for descendants and 0.12Δz for progenitors. Utilizing such an evolving cumulative number density increases the accuracy of descendant/progenitor tracking by a factor of ∼2. This result is in excellent agreement, within 0.10 dex, with abundance matching results over the same redshift range. However, we find that our more physically realistic cosmological hydrodynamic simulations produce a much larger scatter in descendant/progenitor stellar masses than previous studies, particularly when tracking progenitors. This large scatter makes the application of either the constant cumulative number density or evolving cumulative number density technique limited to average stellar masses of populations only, as the diverse mass assembly histories caused by stochastic physical processes such as gas accretion or mergers lead to an even larger scatter in other physical properties such as metallicity and star formation rate.

79 ASTRONOMY AND ASTROPHYSICS↗

Influence of powder metallurgy route on precipitation processes in MgTbNd alloy

Solution treated MgTb3Nd2 alloy (nominal composition in wt.%) (ST) and the alloy prepared by hot extrusion of isostatically pressed powder (PM) were isochronally heat treated and studied by electrical resistivity and hardness measurements and by differential scanning calorimetry. Microstructure development was investigated in transmission electron microscopy. Successive precipitation of transient phases in the sequence β″ (D0{sub 19} plates) → β′(cbco) → β{sub 1} (Mg{sub 3}Gd type, fcc) → β (Mg{sub 5}Gd type, fcc) known from the ST alloy was identified also in the PM alloy. The early precipitation stage (D0{sub 19} clusters) revealed in the ST alloy as well as precipitation of equilibrium β{sub e} phase Mg{sub 41}(Tb,Nd){sub 5} manifest themselves only slightly in the PM alloy. Powder metallurgy route does not change the values of activation energies but shifts the temperature ranges of these processes. Vickers hardness of the as prepared state is higher in the PM alloy and is very resistant against the heat treatment up to 510 °C. Contrary to the ST alloy precipitation due to isochronal annealing does not lead to pronounced hardness changes in the PM alloy. - Highlights: • Powder metallurgy (PM) does not change precipitation sequence in MgTbNd alloy. • Temperature ranges of transient phase precipitations are shifted in PM alloy. • Hardness is resistant against isochronal heat treatment up to 510 °C in the PM alloy. • PM procedure does not change activation energies of precipitation.

36 MATERIALS SCIENCE↗