Search NASA⌕ Search

SEARCH · Search NASA

Results for “SL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
NASA NTRS2006

Enhancing the ATIC Charge Resolution

The Advanced Thin Ionization Calorimeter (ATIC) experiment measures the energy spectra of elements, from H to Fe, in the energy region from about 100 GeV to tens of TeV. The ATIC instrument was flown twice in long-duration balloon flights around the South Pole; the ATIC-1 test flight during Dec. 2000 - Jan. 2001 and the ATIC-2 science flight during Dec. 2002 - Jan. 2003. Analyses of both datasets have, to date, relied upon the highly segmented Silicon Matrix (SiM) detector to separate the incident cosmic ray from the calorimeter backscatter and to identify the charge. This method has worked well, enabling ATIC to separate protons from helium and to resolve all the major species up through iron. This charge resolution can be significantly improved by restricting the analysis to particle trajectories that pass through two SiM pixels at the cost of using only a fraction of the potential instrument geometry. However, immediately below the SiM is the two layer SI hodoscope (x, y) consisting of Bicron BC-408 plastic scintillator 2 cm wide, 1 cm thick, 88.2 cm long strips viewed by Hamamatsu R5611 photomultiplier tubes on each end of each strip. The primary purpose of the ATIC hodoscopes is to provide a fast trigger, and each hodoscope includes two crossed layers of strips (42 per layer in the case of Sl) providing supplemental particle trajectory information. The hodoscope readout electronics were designed to provide reasonable charge resolution over the dynamic range from protons through iron. This presentation discusses the S 1 hodoscope energy deposit calibrations, examines the charge resolution possible with this detector and investigates combining the S1 and SiM charge measurements to improve the overall ATIC charge resolution while minimizing degradation of the instrument geometry.

Guzik, T. G.↗
NASA NTRS2006

Ar-39-Ar-40 Evidence for Early Impact Events on the LL Parent Body

We determined Ar-39-Ar-40 ages of eight LL chondrites, and one igneous inclusion from an LL chondrite, with the object of understanding the thermal history of the LL-chondrite parent body. The meteorites in this study have a range of petrographic types from LL3.3 to LL6, and shock stages from S1 to S4. These meteorites reveal a range of K-Ar ages from 23.66 to 24.50 Ga, and peak ages from 23.74 to 24.55 Ga. Significantly, three of the eight chondrites (LL4, 5, 6) have K-Ar ages of -4.27 Ga. One of these (MIL99301) preserves an Ar-39-Ar-40 age of 4.23 +/- 0.03 Ga from low-temperature extractions, and an older age of 4.52 +/- 0.08 Ga from the highest temperature extractions. In addition, an igneous-textured impact melt DOM85505,22 has a peak Ar-39-Ar-40 age of >= 4.27 Ga. We interpret these results as evidence for impact events that occurred at about 4.27 Ga on the LL parent body that produced local impact melts, reset the Ar-39-Ar-40 ages of some meteorites, and exhumed (or interred) others, resulting in a range of cooling ages. The somewhat younger peak age of 3.74 Ga from GR095658 (LL3.3) suggests an additional impact event close to timing of impact-reset ages of some other ordinary chondrites between 3.6-3.8 Ga. The results from MIL99301 suggest that some apparently unshocked (Sl) chondrites may have substantially reset Ar-39-Ar-40 ages. A previous petrographic investigation of MIL99301 suggested that reheating to temperatures less than or equal to type 4 petrographic conditions (600C) caused fractures in olivine to anneal, resulting in a low apparent shock stage of S1 (unshocked). The Ar-39-Ar-40 age spectrum of MIL99301 is consistent with this interpretation. Older ages from high-T extractions may date an earlier impact event at 4.52 +/- 0.08 Ga, whereas younger ages from lower-T extractions date a later impact event at 4.23 Ar-39-Ar-40 0.03 Ga that may have caused annealing of feldspar and olivine

Dixon, E. T.↗
NASA NTRS2006

Postshock Annealing and Postannealing Shock in Equilibrated Ordinary Chondrites: Implications for the Thermal and Shock Histories of Chondritic Asteroids

In addition to shock effects in olivine, plagioclase, orthopyroxene and Ca-pyroxene, petrographic shock indicators in equilibrated ordinary chondrites (OC) include chromite veinlets, chromite-plagioclase assemblages, polycrystalline troilite, metallic Cu, irregularly shaped troilite grains within metallic Fe-Ni, rapidly solidified metal-sulfide intergrowths, martensite and various types of plessite, metal-sulfide veins, large metal and/or sulfide nodules, silicate melt veins, silicate darkening, low-Ca clinopyroxene, silicate melt pockets, and large regions of silicate melt. The presence of some of these indicators in every petrologic type-4 to -6 ordinary chondrite (OC) demonstrates that collisional events caused all equilibrated OC to reach shock stages S3-S6. Those type-4 to -6 OC that are classified as shock-stage S1 (on the basis of sharp optical extinction in olivine) underwent postshock annealing due to burial beneath materials heated by the impact event. Those type-4 to -6 OC that are classified S2 (on the basis of undulose extinction and lack of planar fractures in olivine) were shocked to stage S3-S6, annealed to stage S1 and then shocked again to stage S2. Some OC were probably shocked to stage 253 after annealing. It seems likely that many OC experienced multiple episodes of shock and annealing. Because 40Ar-39Ar chronological data indicate that MIL 99301 (LL6, Sl) was annealed approximately 4.26 Ga ago, presumably as a consequence of a major impact, it seems reasonable to suggest that other equilibrated S1 and S2 OC (which contain relict shock features) were also annealed by impacts. Because some type-6 S1 OC (e.g., Guarena, Kernouve, Portales Valley, all of which contain relict shock features) were annealed 4.44-4.45 Ga ago (during a period when impacts were prevalent and most OC were thermally metamorphosed), it follows that impact-induced annealing could have contributed significantly to OC thermal metamorphism.

Rubin, Alan E.↗
NASA NTRS2006

Spade: An H Chondrite Impact-melt Breccia that Experienced Post-shock Annealing

The low modal abundances of relict chondrules (1.8 Vol%) and of coarse (i.e. >= 2200 micron-size) isolated mafic silicate grains (1.8 Vol%) in Spade relative to mean H6 chondrites (11.4 and 9.8 vol%, respectively) show Spade to be a rock that has experienced a significant degree of melting. Various petrographic features (e.g., chromite-plagioclase assemblages, chromite veinlets, silicate darkening) indicate that melting was caused by shock. Plagioclase was melted during the shock event and flowed so that it partially to completely surrounded nearby mafic silicate grains. During crystallization, plagioclase developed igneous zoning. Low-Ca pyroxene that crystallized from the melt (or equilibrated with the melt at high temperatures) acquired relatively high amounts of CaO. Metallic Fe-Ni cooled rapidly below the Fe-Ni solws and transformed into martensite. Subsequent reheating of the rock caused transformation of martensite into abundant duplex plessite. Ambiguities exist in the shock stage assignment of Spade. The extensive silicate darkening, the occurrence of chromite-plagioclase assemblages, and the impact-melted characteristics of Spade are consistent with shock stage S6. Low shock (stage S2) is indicated by the undulose extinction and lack of planar fractures in olivine. This suggests that Spade reached a maximum prior shock level equivalent to stage S6 and then experienced post-shock annealing (probably to stage Sl). These events were followed by a less intense impact that produced the undulose extinction in the olivine, characteristic of shock stage S2. Annealing could have occurred if Spade were emplaced near impact melts beneath the crater floor or deposited in close proximity to hot debris within an ejecta blanket. Spade firmly establishes the case for post-shock annealing. This may have been a common process on ordinary chondrites (OC) asteroids.

Rubin, Alan E.↗
NASA NTRS2007

Initial Results from the Floating Potential Measurement Unit aboard the International Space Station

The Floating Potential Measurement Unit (FPMU) is a multi-probe package designed to measure the floating potential of the 1nternational Space Station (ISS) as well as the density and temperature of the local ionospheric plasma environment. The role oj the FPMU is to provide direct measurements of ISS spacecraft charging as continuing construction leads to dramatic changes in ISS size and configuration. FPMU data are used for refinement and validation of the ISS spacecraft charging models used to evaluate the severity and frequency of occurrence of ISS charging hazards. The FPMU data and the models are also used to evaluate the effectiveness of proposed hazard controls. The FPMU consists of four probes: a floating potential probe, two Langmuir probes. and a plasma impedance probe. These probes measure the floating potential of the ISS, plasma density, and electron temperature. Redundant measurements using different probes support data validation by inter-probe comparisons. The FPMU was installed by ISS crewmembers, during an ExtraVehicular Activity, on the starboard (Sl) truss of the ISS in early August 2006, when the ISS incorporated only one 160V US photovoltaic (PV) array module. The first data campaign began a few hours after installation and continued for over five days. Additional data campaigns were completed in 2007 after a second 160V US PV array module was added to the ISS. This paper discusses the general performance characteristics of the FPMU as integrated on ISS, the functional performance of each probe, the charging behavior of the ISS before and after the addition of a second 160V US PV array module, and initial results from model comparisons.

Wright, Kenneth H., Jr.↗
NASA NTRS2006

Observations of Precipitation Size and Fall Speed Characteristics within Coexisting Rain and Wet Snow

Ground-based measurements of particle size and fall speed distributions using a Particle Size and Velocity (PARSIVEL) disdrometer are compa red among samples obtained in mixed precipitation (rain and wet snow) and rain in the Oregon Cascade Mountains and in dry snow in the Rock y Mountains of Colorado. Coexisting rain and snow particles are distinguished using a classification method based on their size and fall sp eed properties. The bimodal distribution of the particles' joint fall speed-size characteristics at air temperatures from 0.5 to 0 C suggests that wet-snow particles quickly make a transition to rain once mel ting has progressed sufficiently. As air temperatures increase to 1.5 C, the reduction in the number of very large aggregates with a diame ter > 10 mm coincides with the appearance of rain particles larger than 6 mm. In this setting. very large raindrops appear to be the result of aggregates melting with minimal breakup rather than formation by c oalescence. In contrast to dry snow and rain, the fall speed for wet snow has a much weaker correlation between increasing size and increasing fall speed. Wet snow has a larger standard deviation of fall spee d (120%-230% relative to dry snow) for a given particle size. The ave rage fall speed for observed wet-snow particles with a diameter great er than or equal to 2.4 mm is 2 m/s with a standard deviation of 0.8 m/s. The large standard deviation is likely related to the coexistence of particles of similar physical size with different percentages of melting. These results suggest that different particle sizes are not required for aggregation since wet-snow particles of the same size can have different fall speeds. Given the large standard deviation of fa ll speeds in wet snow, the collision efficiency for wet snow is likely larger than that of dry snow. For particle sizes between 1 and 10 mm in diameter within mixed precipitation, rain constituted I % of the particles by volume within the isothermal layer at 0 C and 4% of the particles by volume for the region just below the isothermal layer where air temperatures rise from 0" to 0.5"C. As air temperatures increa sed above 0.5 C, the relative proportions of rain versus snow particl es shift dramatically and raindrops become dominant. The value of 0.5 C for the sharp transition in volume fraction from snow to rain is sl ightly lower than the range from 1 .l to 1.7 C often used in hydrolog ical models.

Yuter, Sandra E.↗
NASA NTRS2009

Reflectance Spectra Comparison of Orbital Debris, Intact Spacecraft, and Intact Rocket Bodies in the GEO Regime

A key objective of NASA s Orbital Debris program office at Johnson Space Center (JSC) is to characterize the debris environment by way of assessing the physical properties (type, mass, density, and size) of objects in orbit. Knowledge of the geosynchronous orbit (GEO) debris environment in particular can be used to determine the hazard probability at specific GEO altitudes and aid predictions of the future environment. To calculate an optical size from an intensity measurement of an object in the GEO regime, a 0.175 albedo is assumed currently. However, identification of specific material type or types could improve albedo accuracy and yield a more accurate size estimate for the debris piece. Using spectroscopy, it is possible to determine the surface materials of space objects. The study described herein used the NASA Infrared Telescope Facility (IRTF) to record spectral data in the 0.6 to 2.5 micron regime on eight catalogued space objects. For comparison, all of the objects observed were in GEO or near-GEO. The eight objects consisted of two intact spacecraft, three rocket bodies, and three catalogued debris pieces. Two of the debris pieces stemmed from Titan 3C transtage breakup and the third is from COSMOS 2054. The reflectance spectra of the Titan 3C pieces share similar slopes (increasing with wavelength) and lack any strong absorption features. The COSMOS debris spectra is flat and has no absorption features. In contrast, the intact spacecraft show classic absorption features due to solar panels with a strong band gap feature near 1 micron. The two spacecraft are spin-stabilized objects and therefore have solar panels surrounding the outer surface. Two of the three rocket bodies are inertial upper stage (IUS) rocket bodies and have similar looking spectra. The slopes flatten out near 1.5 microns with absorption features in the near-infrared that are similar to that of white paint. The third rocket body has a similar flattening of slope but with fewer features of white paint - indicating that the surface paint on the SL-12 may be different than the IUS. This study shows that the surface materials of debris appear different spectrally than intact rocket bodies and spacecraft and therefore are not believed to be solar panel material or pristine white paint. Further investigation is necessary in order to eliminate materials as possible choices for the debris pieces.

Barker, Ed↗
NASA NTRS2009

Solar Spicules near and at The Limb, Observed from Hinode

Solar spicules appear as narrow jets emanating from the chromosphere and extending into the corona. They have been observed for over a hundred years,mainly in chromospheric spectral lines such as H-alpha. Because they are at the limit of visibility of ground-based instruments, their nature has long been a puzzle. In recent years however, vast progress has been made in understanding them both theoretically and observationally. Most recently, spicule studies have undergone revolution because of the superior resolution, time cadence, and atmosphere-free observations from the Solar Optical Telescope (SOT) instrument on the Hinode spacecraft. Here we present observations of spicules from {\sl Hinode} SOT, and consider how the observations from Hinode compare with historical observations. We include data taken in the blue and red wings of Halpha, where the spicules have widths of a few approx.100 kms, and the longest ones reach about 10(exp 4) km in extent,similar to sizes long reported from ground-based instruments. Their dynamics are not easy to generalize, with many showing the upward movement followed by falling or fading, as traditionally reported, but with others showing more dynamic or even ejective aspects. There is a strong transverse component to their motion, as extensively reported previously from the Hinode data as evidence for Alfven waves.

Sterling, Alphonse C.↗
NASA NTRS2012

Optical Signature Analysis of Tumbling Rocket Bodies via Laboratory Measurements

The NASA Orbital Debris Program Office has acquired telescopic lightcurve data on massive intact objects, specifically spent rocket bodies, in order to ascertain tumble rates in support of the Active Debris Removal (ADR) task to help remediate the LEO environment. Rotation rates are needed to plan and develop proximity operations for potential future ADR operations. To better characterize and model optical data acquired from ground-based telescopes, the Optical Measurements Center (OMC) at NASA/JSC emulates illumination conditions in space using equipment and techniques that parallel telescopic observations and source-target-sensor orientations. The OMC employs a 75-watt Xenon arc lamp as a solar simulator, an SBIG CCD camera with standard Johnson/Bessel filters, and a robotic arm to simulate an object's position and rotation. The light source is mounted on a rotary arm, allowing access any phase angle between 0 -- 360 degrees. The OMC does not attempt to replicate the rotation rates, but focuses on how an object is rotating as seen from multiple phase angles. The two targets studied are scaled (1:48), SL-8 Cosmos 3M second stages. The first target is painted in the standard government "gray" scheme and the second target is primary white, as used for commercial missions. This paper summarizes results of the two scaled rocket bodies, each rotated about two primary axes: (a) a spin-stabilized rotation and (b) an end-over-end rotation. The two rotation states are being investigated as a basis for possible spin states of rocket bodies, beginning with simple spin states about the two primary axes. The data will be used to create a database of potential spin states for future works to convolve with more complex spin states. The optical signatures will be presented for specific phase angles for each rocket body and shown in conjunction with acquired optical data from multiple telescope sources.

Cowardin, H.↗
NASA NTRS2012

Instrumentation and First Results of the Reflected Solar Demonstration System for the Climate Absolute Radiance and Refractivity Observatory

The Climate Absolute Radiance and Refractivity Observatory (CLARREO) mission key goals include enabling observation of high accuracy long-term climate change trends, use of these observations to test and improve climate forecasts, and calibration of operational and research sensors. The spaceborne instrument suites include a reflected solar spectroradiometer, emitted infrared spectroradiometer, and radio occultation receivers. The requirement for the RS instrument is that derived reflectance must be traceable to Sl standards with an absolute uncertainty of <0.3% and the error budget that achieves this requirement is described in previo1L5 work. This work describes the Solar/Lunar Absolute Reflectance Imaging Spectroradiometer (SOLARIS), a calibration demonstration system for RS instrument, and presents initial calibration and characterization methods and results. SOLARIS is an Offner spectrometer with two separate focal planes each with its own entrance aperture and grating covering spectral ranges of 320-640, 600-2300 nm over a full field-of-view of 10 degrees with 0.27 milliradian sampling. Results from laboratory measurements including use of integrating spheres, transfer radiometers and spectral standards combined with field-based solar and lunar acquisitions are presented. These results will be used to assess the accuracy and repeatability of the radiometric and spectral characteristics of SOLARIS, which will be presented against the sensor-level requirements addressed in the CLARREO RS instrument error budget.

McCorkel, Joel↗
NASA NTRS2012

A Storm's Approach; Hurricane Shelter Training in a Digital Age

New York City's Office of Emergency Management (OEM) originally ran hundreds of classroom based courses, where they brought together civil servants to learn how to run a Hurricane Shelter (HS). This approach was found to be costly, time consuming and lacked any sense of an impending disaster and need for emergency response. In partnership with the City of New York University School of Professional studies, Gronstedt Group and Daden Limited, the OEM wanted to create a simulation that overcame these issues, providing users with a more immersive and realistic approach at a lower cost. The HS simulation was built in the virtual world Second Life (SL). Virtual worlds are a genre of online communities that often take the form of a computer-based simulated environments, through which users can interact with one another and use or create objects. Using this technology allowed managers to apply their knowledge in both classroom and remote learning environments. The shelter simulation is operational 24/7, guiding users through a 4 1/2 hour narrative from start to finish. This paper will describe the rationale for the project, the technical approach taken - particularly the use of a web based authoring tool to create and manage the immersive simulation, and the results from operational use.

Boyarsky, Andrew↗
NASA NTRS2018

The Impact of Satellite Sea Surface Salinity for Prediction of the Coupled Indo-Pacific System

Here we assess the impact of satellite sea surface salinity (SSS) observations on seasonal to interannual variability of tropical Indo-Pacific Ocean dynamics as well as on dynamical ENSO forecasts. The baseline experiment assimilates satellite sea level (SL), sea surface temperature (SST), and in situ subsurface temperature and salinity observations (Tz, Sz). These baseline experiments are then compared with experiments that additionally assimilate Aquarius (version 5.0 Lilly and Lagerloef, 2008) and SMAP (version 2.0 Meissner and Wentz, 2016) SSS. Twelve-month forecasts are initialized for each month from September 2011 to September 2017. We find that including satellite SSS significantly improves NINO3.4 sea surface temperature anomaly validation over 0-8 month forecast lead-times and removing the salty bias from SMAP data helps to extend useful forecasts out to 12 month lead-times.

SSS↗
NASA NTRS2018

Assessment of Sea Surface Salinity Products Using a Coupled ENSO Prediction Model

We assess the impact of satellite sea surface salinity (SSS) observations on seasonal to interannual variability of tropical Indo-Pacific Ocean dynamics as well as on dynamical ENSO forecasts. Twelve-month forecasts are initialized for each month from September 2011 to September 2017. All experiments assimilate satellite sea level (SL), sea surface temperature (SST), and in situ subsurface temperature and salinity observations (T(sub z), S(sub z)). Additionally various satellite, blended, and in-situ SSS products are assimilated. Using our intermediate-complexity coupled model as a transfer function, we test if more mature SSS model algorithms actually improve ENSO forecast skill. We find that including satellite SSS significantly improves Niño3.4 sea surface temperature anomaly validation, more mature SSS model algorithms are generally improving ENSO forecasts over time, and more satellite SSS helps to extend useful forecasts.

Hackert, E.↗
NASA NTRS2019

Assessment of Satellite Sea Surface Salinity Products Using a Coupled ENSO Prediction Model

Much work has gone into revising and updating algorithms for converting satellite-measured radiances to useful ocean variables like sea surface salinity (e.g. SMOS - Boutin et al., 2017, SMAP - Fore et al., 2016 and Aquarius - Meissner et al., 2018). As part of our Ocean Salinity Science Team work, we utilize an intermediate-complexity air/sea coupled model as a transfer function to test if more mature satellite SSS model algorithms actually improve ENSO forecast skill. For initialization of the coupled forecast, we demonstrate that the positive impact of SSS assimilation is brought about by surface freshening near the eastern edge of the western Pacific warm pool and density changes that lead to shallower mixed layer between 10S-5N. In addition, salting near the ITCZ leads to a deepening of the mixed layer and thermocline near 8N. These patterns together provide the background state to amplify equatorial Kelvin waves and improve ENSO hindcasts (Hackert et al., 2019). Here we extend this work to compare the impact of various pairs of original and improved satellite SSS algorithms. For instance we compare SMAP V4.1 with the latest, SMAP V4.2, to see what impact algorithm improvements may have on ENSO forecasts. SSS observations are tested on seasonal to interannual variability of tropical Indo-Pacific Ocean dynamics as well as on dynamical ENSO forecasts by initializing twelve-month forecasts for each month of available data. All experiments assimilate satellite sea level (SL), sea surface temperature (SST), and in situ subsurface temperature and salinity observations (Tz, Sz). Additionally various satellite, blended, and in-situ SSS products are assimilated. We find that including satellite SSS significantly improves Niño3.4 sea surface temperature anomaly validation, more mature SSS model algorithms are generally improving ENSO forecasts over time, and more satellite SSS data coverage helps to extend useful forecasts.

Ocean↗
NASA NTRS2019

Summary DSG-RQMT-004, Gateway Electromagnetic Environmental Effects (E3) Requirements Document, Initial Baseline

The Baseline Readiness Review presentation for DSG-RQMT-004 at a high level summarizes the differences between the originating standards (publicly available) and the Gateway-tailored standards (publicly available per DAA 72653). All data in the presentations are either derived from either MIL-STD-461G, SSP 30237, or SL-E-002 (Shuttle EMI spec). The Baseline Readiness Review presentation identifies why a tailored standard was necessary for Gateway (summarizes the changes made from the originating standard). Communicating this information should lead to IP and vendor Level 3 responders proposing substitute standards more in line with the Gateway requirements.

MIL-STD-464↗
NASA NTRS2019

Summary DSG-RQMT-007, Initial Baseline

The Baseline Readiness Review presentations for DSG-RQMT-007 at a high level summarizes the differences between the originating standards (publicly available) and the Gateway-tailored standards (publicly available per DAA 72653). All data in the presentations are either derived from either MIL-STD-461G, SSP 30237, or SL-E-002 (Shuttle EMI spec). The Baseline Readiness Review presentation identifies why a tailored standard was necessary for Gateway (summarizes the changes made from the originating standard). Communicating this information should lead to IP and vendor Level 3 responders proposing substitute standards more in line with the Gateway requirements.

MIL-STD-461↗
NASA NTRS2019

Flight Mechanics Modeling and Post-Flight Analysis of ADEPT SR-1

Sounding Rocket One (SR-1), the first flight test of the Adaptable Deployable Entry and Placement Technology (ADEPT), was performed on Sept. 12, 2018. ADEPT is a deployable aeroshell that can be stowed during launch and then opened after launch to increase the drag area of the spacecraft when entering into a planetary atmosphere. The main objectives of the SR-1 flight test were to demonstrate that the ADEPT vehicle can be opened exo-atmospherically and to characterize the stability of the vehicle during atmospheric flight. The SR-1 test vehicle was a 0.7 m diameter 70 degree half-angle, faceted, sphere-cone, which was the primary payload on an UP Aerospace Spaceloft (SL) launch vehicle from the White Sands Missile Range (WSMR). ADEPT successfully separated from the spent booster in its stowed configuration, opened above 100 km altitude, and then landed in the deployed configuration within WSMR. The flight mechanics of the vehicle was modeled pre-flight for performance and range safety predictions. This paper describes the pre-flight ADEPT trajectory simulation and how the flight data compared with the predictions from the simulations.

Dutta, Soumyo↗
NASA NTRS1993

Small Spacecraft Conceptual Design For a Fast Pluto Flyby Mission

The Pluto Fas Flyby mission is a pre-Phase A mission development activity being pursued at the Jet Propulsion Laboratory and funded by NASA's Code SL. Its objective is to conduct first reconnaissace level science at Pluto before its atmospheric collapse in the next two to three decades.

Pluto↗