SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The geosynchronous plasma environment in the 0 to 100 keV energy range as input in the modeling of spacecraft charging phenomena is summarized. Models for spacecraft design are reviewed, emphasizing practical tools for predicting the effects of spacecraft interactions on satellite systems.
The geosynchronous plasma environment in the 0 to 100 keV energy range as input in the modeling of spacecraft charging phenomena is summarized. Models for spacecraft design are reviewed, emphasizing practical tools for predicting the effects of spacecraft interactions on satellite systems.
Several analytical mechanical slosh models for a cylindrical tank with flat bottom are reviewed. Even though spacecrafts use cylinder shaped tanks, most of those tanks usually have elliptical domes. To extend the application of the analytical models for a cylindrical tank with elliptical domes, the modified slosh parameter models are proposed in this report by mapping an elliptical dome cylindrical tank to a flat top/bottom cylindrical tank while maintaining the equivalent liquid volume. For the low Bond number case, the low-g slosh models were also studied. Those low-g models can be used for Bond number > 10. The current low-g slosh models were also modified to extend their applications for the case that liquid height is smaller than the tank radius. All modified slosh models are implemented in MATLAB m-functions and are collected in the developed MST (Mechanical Slosh Toolbox).
Throughout the spacecraft design and development process, detailed instrument thermal models are created to simulate their on-orbit behavior and to ensure that they do not exceed any thermal limits. These detailed models, while generating highly accurate predictions, can sometimes lead to long simulation run times, especially when integrated with a spacecraft observatory model. Therefore, reduced models containing less detail are typically produced in tandem with the detailed models so that results may be more readily available, albeit less accurate. In the current study, both reduced and detailed instrument models are integrated with their associated spacecraft bus models to examine the impact of instrument model reduction on run time and accuracy. Preexisting instrument bus thermal model pairs from several projects were used to determine trends between detailed and reduced thermal models; namely, the Mirror Optical Bench (MOB) on the Gravity and Extreme Magnetism Small Explorer (GEMS) spacecraft, Advanced Topography Laser Altimeter System (ATLAS) on the Ice, Cloud, and Elevation Satellite 2 (ICESat-2), and the Neutral Mass Spectrometer (NMS) on the Lunar Atmosphere and Dust Environment Explorer (LADEE). Hot and cold cases were run for each model to capture the behavior of the models at both thermal extremes. It was found that, though decreasing the number of nodes from a detailed to reduced model brought about a reduction in the run-time, a large time savings was not observed, nor was it a linear relationship between the percentage of nodes reduced and time saved. However, significant losses in accuracy were observed with greater model reduction. It was found that while reduced models are useful in decreasing run time, there exists a threshold of reduction where, once exceeded, the loss in accuracy outweighs the benefit from reduced model runtime.
The Cassini spacecraft has executed nearly 300 maneuvers since 1997, providing ample data for execution-error model updates. With maneuvers through 2017, opportunities remain to improve on the models and remove biases identified in maneuver executions. This manuscript focuses on how execution-error models can be used to judge maneuver performance, while providing a means for detecting performance degradation. Additionally, this paper describes Cassini's execution-error model updates in August 2012. An assessment of Cassini's maneuver performance through OTM-368 on January 5, 2014 is also presented.
A model based on the Boltzmann kinetic equation describing electron beam ejection from spacecraft is presented. Results are shown for steady-state, beam-atmosphere interaction (BAI) and for beam-plasma interaction (BPI). The BPI considered is that of elastic scattering of beam electrons with strong, short-scale Langmuir turbulence. This mechanism has been suggested for prompt echoes of beam electrons observed in sounding rocket experiments. It is shown that the interaction is sufficiently strong to account for observations of back-scattered electrons at the beam accelerator energy. However, it is clear from observations that particles undergo diffusion in energy at a rate exceeding levels expected for BAI. Inelastic scattering in BPI must therefore also be important.
Radioisotope thermoelectric generator interface specifications - NASA Evaluation With Models Of Optimized Nuclear Spacecraft /NEW MOONS/
Design practices to provide protection for International Space Station (ISS) crew and critical equipment from meteoroid and orbital debris (M/OD) Impacts have been developed. Damage modes and failure criteria are defined for each spacecraft system. Hypervolocity Impact -1 - and analyses are used to develop ballistic limit equations (BLEs) for each exposed spacecraft system. BLEs define Impact particle sizes that result in threshold failure of a particular spacecraft system as a function of Impact velocity, angles and particle density. The BUMPER computer code Is used to determine the probability of no penetration (PNP) that falls the spacecraft shielding based on NASA standard meteoroid/debris models, a spacecraft geometry model, and the BLEs. BUMPER results are used to verify spacecraft shielding requirements Low-weight, high-performance shielding alternatives have been developed at the NASA Johnson Space Center (JSC) Hypervelocity Impact Technology Facility (HITF) to meet spacecraft protection requirements.
The proposed project will investigate modeling and simulation-driven testing and fault tolerance schemes for Spacecraft On-Board Computing, thereby achieving reliable spacecraft telecommunication. A spacecraft communication system has inherent capabilities of providing multipoint and broadcast transmission, connectivity between any two distant nodes within a wide-area coverage, quick network configuration /reconfiguration, rapid allocation of space segment capacity, and distance-insensitive cost. To realize the capabilities above mentioned, both the size and cost of the ground-station terminals have to be reduced by using reliable, high-throughput, fast and cost-effective on-board computing system which has been known to be a critical contributor to the overall performance of space mission deployment. Controlled vulnerability of mission data (measured in sensitivity), improved performance (measured in throughput and delay) and fault tolerance (measured in reliability) are some of the most important features of these systems. The system should be thoroughly tested and diagnosed before employing a fault tolerance into the system. Testing and fault tolerance strategies should be driven by accurate performance models (i.e. throughput, delay, reliability and sensitivity) to find an optimal solution in terms of reliability and cost. The modeling and simulation tools will be integrated with a system architecture module, a testing module and a module for fault tolerance all of which interacting through a centered graphical user interface.
Evaluation of transient loads for environmental testing of spacecraft using multiple degree of freedom model
A model reference adaptive control law is presented for large angle rotational maneuvers of spacecraft using reaction jets. It is assumed that the various parameters of the spacecraft are completely unknown, and unknown but bounded disturbance torques are acting on the spacecraft. The controller includes a dynamic system in the feedback path. Simulation results are presented to show that fast, large angle rotational maneuvers can be performed using the adaptive controller in spite of uncertainty in the system.
We summarize work performed involving thermo-optical modeling of the two Gravity Recovery And Interior Laboratory (GRAIL) spacecraft. We derived several reconciled spacecraft thermo-optical models having varying detail. We used the simplest in calculating SRP acceleration, and used the most detailed to calculate acceleration due to thermal re-radiation. For the latter, we used both the output of pre-launch finite-element-based thermal simulations and downlinked temperature sensor telemetry. The estimation process to recover the lunar gravity field utilizes both a nominal thermal re-radiation accleration history and an apriori error model derived from that plus an off-nominal history, which bounds parameter uncertainties as informed by sensitivity studies.
This viewgraph presentation describes new methodologies for carbon dioxide and humidity removal from manned spacecraft atmospheres. The mathematical modeling of various adsorbents is also presented.
A model, in closed form, of position and velocity changes due to atmospheric drag of a spacecraft in orbit about a planetary body is presented, considering primarily the effects of a two-body force field. Calculations for both elliptical and circular geometries indicate that the simplifying assumptions in the analysis make the theory more accurate (to less than 1 percent error) for lengthier mappings, when the drag effect becomes quite significant. The downtrack error demonstrates a quadratic growth, while the radial error demonstrates a linear growth.
A mathematical model for a general multibody flexible spacecraft is obtained. The generic spacecraft considered consists of a flexible central body to which a number of flexible multibody structures are attached. The coordinate systems used in the derivation allow effective decoupling of the translational motion of the entire spacecraft from its rotational motion about its center of mass. The derivation assumes that the deformations in the bodies are only due to elastic motions. The dynamic model derived is a closed-form vector-matrix differential equation. The model developed can be used for analysis and simulation of many realistic spacecraft configurations.
In an effort to improve the reliability and versatility of spacecraft charging models designed to assist spacecraft designers in accommodating and mitigating the harmful effects of charging on spacecraft, the NASA Space Environments and Effects (SEE) Program has funded development of facilities at Utah State University for the measurement of the electronic properties of both conducting and insulating spacecraft materials. We present here an overview of our instrumentation and capabilities, which are particularly well suited to study electron emission as related to spacecraft charging. These measurements include electron-induced secondary and backscattered yields, spectra, and angular resolved measurements as a function of incident energy, species and angle, plus investigations of ion-induced electron yields, photoelectron yields, sample charging and dielectric breakdown. Extensive surface science characterization capabilities are also available to fully characterize the samples in situ. Our measurements for a wide array of conducting and insulating spacecraft materials have been incorporated into the SEE Charge Collector Knowledge-base as a Database of Electronic Properties of Materials Applicable to Spacecraft Charging. This Database provides an extensive compilation of electronic properties, together with parameterization of these properties in a format that can be easily used with existing spacecraft charging engineering tools and with next generation plasma, charging, and radiation models. Tabulated properties in the Database include: electron-induced secondary electron yield, backscattered yield and emitted electron spectra; He, Ar and Xe ion-induced electron yields and emitted electron spectra; photoyield and solar emittance spectra; and materials characterization including reflectivity, dielectric constant, resistivity, arcing, optical microscopy images, scanning electron micrographs, scanning tunneling microscopy images, and Auger electron spectra. Further details of the instrumentation used for insulator measurements and representative measurements of insulating spacecraft materials are provided in other Spacecraft Charging Conference presentations. The NASA Space Environments and Effects Program, the Air Force Office of Scientific Research, the Boeing Corporation, NASA Graduate Research Fellowships, and the NASA Rocky Mountain Space Grant Consortium have provided support.
The results of an experimental investigation of the effectiveness of various isolation and damping methods in reducing the dynamic response of simplified scaled models of the Nimbus spacecraft to vibratory inputs are presented. Experimental mode shapes and natural frequencies of the simulated solar panels were determined and found to compare well with calculated values. Appreciable reductions of structural responses to vibratory-input motions were measured for independent inputs along the roll, pitch, and yaw axes for the cases in which distributed damping and/or isolation was utilized. A comparison of the response of the model with the full-scale spacecraft for inputs along the pitch axis is presented. Also included are the effects of stiffness between the control and sensory sections on the response of the model to vibratory inputs.
Test models of spacecraft to investigate thermal behavior, particularly Mariner temperature control model