Search NASA⌕ Search

SEARCH · Search NASA

Results for “STORAGE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Allocation and Operation of A Hydropneumatic Energy Storage with Building Microgrid

Behind-meter application for a recently invented hydropneumatic Ground-Level Integrated Diverse Energy Storage (GLIDES) is focused in this research. Considering possible uncertainties from solar radiation and electricity load in a building microgrid, two-stage stochastic programming is adopted for 15-min operation and a mixed-integer nonlinear stochastic model is built with integrated energy systems of GLIDES, solar panel and power generating unit. In order to make the model computationally tractable, we use sample average approximate method to decrease associated complexity with sample size and improve solving efficiency. The experimental results in deterministic and stochastic operation indicate that best candidate solution from SAA are superior to the solution from expected value problem in terms of optimality gap and variance.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2019

Phase transition and energy storage behavior of antiferroelectric PLZT thin films epitaxially deposited on SRO buffered STO single crystal substrates [Phase transition and energy storage behavior of antiferroelectric PLZT thin films epitaxially deposited on SRO buffered STO single crystal substrates]

Thin films of 300-nm-thick (Pb 0.98 , La 0.02 )(Zr 0.95 , Ti 0.05 )O 3 (PLZT) were epitaxially deposited on (100), (110), and (111) SrTiO3 single crystal substrates by pulsed laser deposition. X-ray diffraction line and reciprocal space mapping (RSM) scans were used to determine the crystal structure. Tetragonal ((001) PLZT) and monoclinic MA ((O 1 1 ) and (111) PLZT) structures were found, which influenced the stored energy density. Electric field induced antiferroelectric to ferroelectric (AFE—>FE) phase transitions were found to have a large reversible energy density of up to 30J/cm 3 . With increasing temperature, an AFE to relaxor ferroelectric (AFE—>RFE) transition was found. The RFE phase exhibited lower energy loss, and an improved energy storage efficiency. Here, the results are discussed from the perspective of crystal structure, dielectric phase transitions, and energy storage characteristics.

25 ENERGY STORAGE↗
DOE OSTI2013

From passive storage to daily waste retrieval; changing the working culture at Sellafield's pile fuel storage pond

The Pile Fuel Storage Pond (PFSP) was built in 1948/50 to treat materials from the Windscale Piles. Multiple operational regimes over the intervening 60 years have resulted in a complex inventory of spent nuclear fuels, solid and liquid intermediate level wastes. A coordinated programme of work, designed to retrieve and safely dispose of the pond contents, has been implemented to enable the decommissioning of the facility. The long period of passive storage operations which preceded the implementation of the programme meant that the operator was faced with a dual challenge of providing new technical capability and changing a working culture that was inappropriate for the dynamic environment required to successfully deliver the programme. It was recognised that the nature of the programme meant that implementing a standard manufacturing approach to operations would not be appropriate. In order to create a dynamic retrievals focussed working culture, the operator has vigorously embraced change programmes aimed at improving a number of working practices including encouraging innovation, managing integrated but flexible production schedules, and encouraging work-face problem solving. The combined impact of beginning to resolve the technical challenges and focussing on the delivery culture has resulted in the facility making a step change towards becoming fully retrievals operations focussed. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2019

Energy Storage Financing: Advancing Contracting in Energy Storage

The lack of standard financing contracts and supporting documents is inhibiting the growth of the energy storage industry. A number of firms are actively developing proprietary contract structures, resulting in a variety of unique attributes. This leaves the market disjointed for 3 rd party financing groups looking to scale their lending. Lack of commonality and harmonization between developer and lenders raises project execution costs and causes delays in financing. Of special concern, projects based on emerging technologies are finding an increasing uphill climb for equal consideration by developers and lenders, leaving their potential commercialization in peril. This study will evaluate the development of standardi7ed contracts to reduce the cost and contract approval time, learning from success in renewable energy project development. The goal of this study is to determine the key requirements for standard contracts in the emerging energy storage market, and suggest avenues for possible industry led development.

25 ENERGY STORAGE↗
DOE OSTI2020

Planning Considerations for Energy Storage in Resilience Applications. Outcomes from the NELHA Energy Storage Conference's Policy and Regulatory Workshop

This report presents the proceedings and lessons learned at a conference workshop that discussed the role of energy storage in supporting electric system resilience, which took place at the Natural Energy Laboratory of Hawaii Authority’s (NELHA) Conference on Energy Storage Trends and Opportunities in December 2018. Staff from the Pacific Northwest National Laboratory (PNNL) made two presentations on the topic of resilience: the first covering a conceptual framework for incorporating resilience into resource planning processes, and the second covering a tool developed for microgrid planning that can assist in identifying resource mixes that will meet site-specific resilience needs. Throughout the presentations, presenters and workshop participants discussed the obstacles to improving electric system resilience and potential solutions for overcoming them. Following the workshop, the authors conducted additional research to further contextualize the topics discussed at the workshop and to frame the resulting recommendations for future engagement on this subject by the Department of Energy and the national laboratories.

25 ENERGY STORAGE↗
DOE OSTI2026

Identifying Barriers to Solar and Storage Hybrids: Modeled vs. empirical wholesale market value and net-value for co-located solar + storage projects [Slides]

Large-scale (1MW+) co-located solar and battery storage projects are expanding rapidly in the United States, but their realized contribution to the bulk power system remains poorly understood because public project-level operating data are limited. The Lawrence Berkeley National Laboratory estimates the wholesale market value of 280 operational photovoltaic-plus-storage (PV+S) projects across the seven ISOs/RTOs and 19 additional balancing authorities, representing roughly 95% of the U.S. PV+S fleet in 2024. We model optimized hourly dispatch under energy, capacity, and ancillary-service market opportunities and compare the resulting value with standalone PV value, project-specific levelized cost estimates, and empirical operating or revenue data where available.

14 SOLAR ENERGY↗
NASA NTRS2017

Long-Term Cryogenic Propellant Storage on Mars with Hercules Propellant Storage Facility

This report details the process and results of roughly sizing the steady state, zero boil-off thermal and power parameters of the Hercules Propellant Storage Facility. For power analysis, isothermal and isobaric common bulkhead tank scenarios are considered. An estimated minimum power requirement of 8.3 kW for the Reverse Turbo-Brayton Cryocooler is calculated. Heat rejection concerns in soft vacuum Mars atmosphere are noted and potential solutions are proposed. Choice of coolant for liquid propellant conditioning and issues with current proposed cryocooler cycle are addressed; recommendations are made, e.g. adding a Joule-Thomson expansion valve after the Reverse Turbo-Brayton turbine in order to have two-phase, isothermal heat exchange through the Broad Area Cooling system. Issues with cross-country transfer lines from propellant storage to flight vehicle are briefly discussed: traditional vacuum jacketed lines are implausible, and Mars insulation needs to be developed.

Propellant Storage↗
DOE OSTI2014

Systems Engineering of Chemical Hydrogen Storage, Pressure Vessel and Balance of Plant for Onboard Hydrogen Storage

This is the annual report for the Hydrogen Storage Engineering Center of Excellence project as required by DOE EERE's Fuel Cell Technologies Office. We have been provided with a specific format. It describes the work that was done with cryo-sorbent based and chemical-based hydrogen storage materials. Balance of plant components were developed, proof-of-concept testing performed, system costs estimated, and transient models validated as part of this work.

balance of plant↗
DOE OSTI2017

Extended Storage Considerations for Dry Cask Storage Systems Using Welded Stainless Steel Canisters - 17436

Dry storage of used nuclear fuel is likely to continue for several decades due to the lack of a permanent repository. The Electric Power Research Institute (EPRI) conducted a Failure Modes and Effects Analysis (FMEA) in order to identify degradation mechanisms that are relevant to Dry Cask Storage Systems (DCSSs) which store used fuel within a welded stainless steel canister housed inside a vented concrete cask. Chloride-Induced Stress Corrosion Cracking (CISCC) was identified as the potential degradation mechanism that would be most likely to challenge the confinement function of these canisters. This paper describes research efforts aimed at identifying canisters with CISCC prior to loss of confinement and understanding the consequences should such a loss occur. Key areas of research include development of aging management guidance with recommendations for the scope, frequency, and coverage for canister inspections, demonstration of non-destructive evaluation capabilities, and evaluation of the potential consequences in terms of dose to site personnel and the general public should cracking develop and grow through a canister wall. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2019

Energy Storage Data Reporting in Perspective—Guidelines for Interpreting the Performance of Electrochemical Energy Storage Systems

Due to the tremendous importance of electrochemical energy storage, numerous new materials and electrode architectures for batteries and supercapacitors have emerged in recent years. Correctly characterizing these systems requires considerable time, effort, and experience to ensure proper metrics are reported. Many new nanomaterials show electrochemical behavior somewhere in between conventional double-layer capacitor and battery electrode materials, making their characterization a non-straightforward task. It is understandable that some researchers may be misinformed about how to rigorously characterize their materials and devices, which can result in inflation of their reported data. Additionally, this is not uncommon considering the current state of the field nearly requires record breaking performance for publication in high-impact journals. Incorrect characterization and data reporting misleads both the materials and device development communities, and it is the shared responsibility of the community to follow rigorous reporting methodologies to ensure published results are reliable to ensure constructive progress. This tutorial aims to clarify the main causes of inaccurate data reporting and to give examples of how researchers should proceed. The best practices for measuring and reporting metrics such as capacitance, capacity, coulombic and energy efficiencies, electrochemical impedance, and the energy and power densities of capacitive and pseudocapacitive materials are discussed.

25 ENERGY STORAGE↗
DOE OSTI2017

Manipulating Adsorption-Insertion Mechanisms in Nanostructured Carbon Materials for High-Efficiency Sodium Ion Storage

Hard carbon is one of the most promising anode materials for sodium-ion batteries, but the low coulombic efficiency is still a key barrier. In this paper we synthesized a series of nanostructured hard carbon materials with controlled architectures. Using a combination of in-situ XRD mapping, ex-situ NMR, EPR, electrochemical techniques and simulations, an “adsorption-intercalation” (A-I) mechanism is established for Na ion storage. During the initial stages of Na insertion, Na ions adsorb on the defect sites of hard carbon with a wide adsorption energy distribution, producing a sloping voltage profile. In the second stage, Na ions intercalate into graphitic layers with suitable spacing to form NaCx compounds similar to the Li ion intercalation process in graphite, producing a flat low voltage plateau. The cation intercalation with a flat voltage plateau should be enhanced and the sloping region should be avoided. Guided by this knowledge, non-porous hard carbon material has been developed which has achieved high reversible capacity and coulombic efficiency to fulfill practical application.

Qiu, Shen↗
DOE OSTI2017

Stable Low-Current Electrodeposition of α-MnO 2 on Superaligned Electrospun Carbon Nanofibers for High-Performance Energy Storage

Metal oxide/carbonaceous nanomaterials are promising candidates for energy-storage applications. Yet, inhomogeneous mass and charge transfer across the electrode/electrolyte interface due to unstable metal oxide/carbonaceous nanomaterial synthesis limit their performance in supercapacitors. Here, it is shown that the above problems can be mitigated through stable low-current electrodeposition of MnO 2 on superaligned electrospun carbon nanofibers (ECNFs). The key to this method is coupling a self-designed four steel poles collector for aligned ECNFs and a constant lowcurrent (40 μA) electrodeposition technique to form a uniform Na + -induced α-MnO 2 film which proceeds by a time-dependent growth mechanism involving cluster-“kebab” structures and ending with a compact, uniform MnO 2 film for high-performance energy storage.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Aftertreatment protocols for catalyst characterization and performance evaluation: low-temperature oxidation, storage, three-way, and NH3-SCR catalyst test protocols

A set of standardized and realistic aftertreatment catalyst test protocols have been developed by the Advanced Combustion and Emission Control Technical Team in support of the U.S.DRIVE Partnership. The protocols are intended to accelerate the pace of aftertreatment catalyst innovation by enabling the accurate evaluation and comparison of aftertreatment catalyst performance data from various testing and research facilities to maximize the impact of discovery-phase research occurring across the nation. The protocols address a need identified by the Partnership’s industry partners for consistent and accurate metrics for aftertreatment catalyst evaluation and comparison. The protocols consist of a set of standardized requirements and test procedures that sufficiently capture the performance capability of a catalyst technology in a manner that is adaptable in various laboratories. The protocols provide a detailed description of the necessary reactor system, the steps for achieving a desired aged state of the catalyst, all necessary sample pretreatment to be performed prior to testing, and realistic test conditions for evaluating performance. This article details four low-temperature catalyst test protocols applicable to (1) oxidation catalysts, (2) passive storage (and release) catalysts, (3) three-way catalysts, and (4) NH3-SCR catalysts. The catalyst test protocol descriptions are presented in five (5) sections: protocol general guidelines and the four individual catalyst test protocol descriptions. The general guidelines plus the individual protocol description forms the complete low-temperature catalyst test protocol for the application.

Emission control, Three-way catalyst, oxidation, S↗