Search NASA⌕ Search

SEARCH · Search NASA

Results for “Selection Bias”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Study of $\langle {p}_{\text{T}}\rangle$ and its higher moments, and extraction of the speed of sound in Pb-Pb collisions with ALICE

Ultrarelativistic heavy-ion collisions produce a state of hot and dense strongly interacting QCD matter called quark-gluon plasma (QGP). On an event-by-event basis, the volume of the QGP in ultracentral collisions is mostly constant, while its total entropy can vary significantly due to quantum fluctuations, leading to variations in the temperature of the system. Exploiting this unique feature of ultracentral collisions allows for the interpretation of the correlation of the mean transverse momentum ($\langle$p T $\rangle$) of produced charged hadrons and the number of charged hadrons as a measure for the speed of sound, c s . This speed is related to the rate at which compression waves travel in the QGP and is determined by fitting the relative increase in $\langle$p T $\rangle$ with respect to the relative change in the average charged-particle density ($\langle$dN ch /dη$\rangle$) measured at mid-rapidity. This study reports the event-average $\langle$p T $\rangle$ of charged particles as well as the variance, skewness, and kurtosis of the event-by-event transverse momentum per charged particle ([p T ]) distribution in ultracentral Pb-Pb collisions at a center-of-mass energy of 5.02 TeV per nucleon pair using the ALICE detector. Different centrality estimators based on charged-particle multiplicity or the transverse energy of the event are used to select ultracentral collisions. By ensuring a pseudorapidity gap between the region used to define the centrality and the region used to perform the measurement, the influence of biases and their potential effects on the rise of the mean transverse momentum is tested. The measured c$^{2}_{s}$ is found to strongly depend on the exploited centrality estimator and ranges between 0.1146±0.0028 (stat.)±0.0065 (syst.) and 0.4374±0.0006 (stat.)±0.0184 (syst.) in natural units. The self-normalized variance shows a steep decrease towards ultracentral collisions, while the self-normalized skewness variables show a maximum, followed by a fast decrease. These non-Gaussian features are understood in terms of the vanishing of the impact-parameter fluctuations contributing to the event-to-event [p T ] distribution.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Surface Variability Mapping and Roughness Analysis of the Moon Using a Coarse–Graining Decomposition

The lunar surface contains a wide variety of topographic shapes and features, each with different distributions and scales, and any analysis technique to objectively measure roughness must respect these qualities. Coarse-graining is a naturally scale-dependent filtering technique that preserves scale-dependent symmetries and produces coarse elevation maps that gradually erase the smaller features from the original topography. In this study of the lunar surface, we present two surface variability metrics obtained from coarse-graining lunar topography: fine elevation and coarse curvature. Both metrics are isotropic, deterministic, slope-independent, and coordinate-agnostic. Fine (detrended) elevation is acquired by subtracting the coarse elevation from the original topography and contains features that are smaller than the coarse-graining length-scale. Coarse curvature is the Laplacian of coarsened topography, and naturally quantifies the curvature at any scale and indicates whether a location is elevated or depressed relative to its neighborhood at that scale. We find that highlands and maria have distinct roughness characteristics at all length-scales. Our topographic spectra reveal four scale-breaks that mark characteristic shifts in surface roughness: 100, 300, 1,000, and 4,000 km. Comparing fine elevation distributions between maria and highlands, we show that maria fine elevation is biased toward smaller-magnitude elevations and that the maria–highland discrepancies are more pronounced at larger length-scales. Here, we also provide local examples of selected regions to demonstrate that these metrics can successfully distinguish geological features of different length-scales.

58 GEOSCIENCES↗
DOE OSTI2022

Iterative reconstruction excursions for Baryon Acoustic Oscillations and beyond

ABSTRACT The density field reconstruction technique has been widely used for recovering the baryon acoustic oscillation (BAO) feature in galaxy surveys that has been degraded due to non-linearities. Recent studies advocated adopting iterative steps to improve the recovery much beyond that of the standard technique. In this paper, we investigate the performance of a few selected iterative reconstruction techniques focusing on the BAO and the broad-band shape of the two-point clustering. We include redshift-space distortions, halo bias, and shot noise and inspect the components of the reconstructed field in Fourier space and in configuration space using both density field-based reconstruction and displacement field-based reconstruction. We find that the displacement field reconstruction becomes quickly challenging in the presence of non-negligible shot noise and therefore present surrogate methods that can be practically applied to a much more sparse field such as galaxies. For a galaxy field, implementing a debiasing step to remove the Lagrangian bias appears crucial for the displacement field reconstruction. We show that the iterative reconstruction does not substantially improve the BAO feature beyond an aggressively optimized standard reconstruction with a small smoothing kernel. However, we find taking iterative steps allows us to use a small smoothing kernel more ‘stably’, i.e. without causing a substantial deviation from the linear power spectrum on large scales. In one specific example we studied, we find that a deviation of 13 per cent in $P(k\sim 0.1\, h{\rm \,\,Mpc^{-1}})$ with an aggressive standard reconstruction can reduce to 3–4 per cent with iterative steps.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

Bridging the length scales in ionic separations via data-driving machine learning

We pursued a data science driven machine learning (ML) approach that blended molecular scale attributes informed from molecular dynamics (MD) simulation and materials properties to the selectivity and energy efficiency in targeted ionic separations using electric fields. The model mixtures investigated for ionic separations are pH sensitive and include organic acids, silica and boron, transition metals, such as copper and chromium. There were two major research thrusts of this project. Firstly, we investigated surrogate models and deep learning that relate material chemistries and structures to selective transport of ionic species under applied electric fields. Secondly we investigated how the bipolar junction interfacial design and water dissociation catalyst in bipolar membranes affect reverse bias polarization behavior and pH modulation in deionization platforms as a function of the platform operating parameters (e.g., cell voltage, residence time, and salt feed concentration). As a result of this work, we also were able to start a new direction, namely ML models for molecular design of surfactants.

36 MATERIALS SCIENCE↗
DOE OSTI2021

The Red Supergiant Content of M31 and M33

We identify red supergiants (RSGs) in our spiral neighbors M31 and M33 using near-IR (NIR) photometry complete to a luminosity limit of logL/L{sub ⊙}=4.0. Our archival survey data cover 5 deg{sup 2} of M31, and 3 deg{sup 2} for M33, and are likely spatially complete for these massive stars. Gaia is used to remove foreground stars, after which the RSGs can be separated from asymptotic giant branch (AGB) stars in the color–magnitude diagram. The photometry is used to derive effective temperatures and bolometric luminosities via MARCS stellar atmosphere models. The resulting H-R diagrams show superb agreement with the evolutionary tracks of the Geneva evolutionary group. Our census includes 6400 RSGs in M31 and 2850 RSGs in M33 within their Holmberg radii; by contrast, only a few hundred RSGs are known so far in the Milky Way. Our catalog serves as the basis for a study of the RSG binary frequency being published separately, as well as future studies relating to the evolution of massive stars. Here we use the matches between the NIR-selected RSGs and their optical counterparts to show that the apparent similarity in the reddening of OB stars in M31 and M33 is the result of Malmquist bias; the average extinction in M31 is likely higher than that of M33. As expected, the distribution of RSGs follows that of the spiral arms, while the much older AGB population is more uniformly spread across each galaxy’s disk.

47 OTHER INSTRUMENTATION↗
DOE OSTI2024

AIACHNE's contribution for Nuclear Energy Agency Working Party on International Nuclear Data Evaluation Co-operation Subgroup 50

The AIACHNE (AI/ML Informed cAlifornium CHi Nuclear data Experiment) project aims at designing an experiment for the 252 Cf Prompt Fission Neutron Spectrum (PFNS) that explores systematic biases in an experimental database retrieved from the EXFOR databases. To that end, machine learning (ML) methods were applied to pint-point measurement features likely related to bia. From that information, we selected a feature that should be explored by the AIACHNE experiment. Measurement features are metadata encapsulating all pertinent information about the physical measurement and analysis techniques. Examples are, for instance, what neutron and fission detectors were used for the physical metadata, and what background reduction techniques were employed for analysis techniques. Such metadata were retrieved both from EXFOR entries as well as the literature of data sets described in detail in Ref. [2]. The prerequisite for applying machine learning techniques is casting the metadata into a format that can be parsed by the algorithm. This step might seem trivial but requires to find a unique language where metadata that carry the same physics meaning across several experiments must have the same identifier. One example is, for instance, the neutron detector. As seen in Figure 1, the machine learning code identified the use of 6 Li detectors as being related to bias in some datasets of the AIACHNE 252 Cf PFNS experimental database. In fact, here are several experiments that used neutron detectors containing 6Li in the database, for instance for the example below. EXFOR format has a unique keywords describing detectors such as “SCIN” or “GLASD”. One may think that these keywords are already sufficient descriptors for ML to uniquely find an issue. However, “SCIN” (used for [3, 4]) and “GLASD” (used for [5]) fail to inform the algorithm what is the active material in the detector. And, the key common issue leading to bias in 252 Cf related to neutron detectors is not whether it is a glass detector or a scintillator. No, the issue is that 6 Li was within both detector types and that even small mistakes in the detector response functions around approximately 200 keV are amplified by the 6 Li(n,α) resonance there leading to bias in data as highlighted in Fig. 1 and Ref. [1]. Hence, the features describing the neutron detector must call out the active material in the detector, rather than the existing EXFOR detector keyword, that the ML algorithm can find physically meaningful features related to bias. The AIACHNE team used a precursor of the WPEC (Working Party on International Nuclear Data Evaluation Co-operation) SG(Subgroup)-50 format to store the metadata for the ML analysis.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

The role of peer review and science for advancing public understanding

We live in a time of rapid change. The Covid-19 pandemic has united the world to understand and develop solutions to protect the health and wellbeing of society. At the same time, access to information on the internet and social media has exploded. People are exposed to information with many claims. Some of the information is relevant and accurate. A significant fraction may be inaccurate, biased, and potentially dangerous. With Covid-19, the information might point to cures that are toxic or risks that are not relevant. The scientific community has developed a process to develop and convey knowledge. The validation of results and their interpretation is critical to advancing knowledge. The core of the scientific process is based on developing a hypothesis-driven concept, designing and executing an experimental approach to prove or disprove the hypothesis, conducting a statistical analysis of the results to confirm their validity, and interpreting their meaning and impact. When their work is completed the scientist prepares to publish the work. Publication requires peer review. Hypotheses, experimental approaches, results, and interpretation of results are independently and anonymously reviewed by a scientific peer. The reviewers are selected based on their expertise in the field. The peer review process is essential for the integrity of the scientific process. Without a robust scientific process, society cannot discriminate between validated results and interpretations and biased, inaccurate, and potentially dangerous conjecture. With inaccurate science society and policy makers may make poor decisions that could hurt people and the world around them. While scientists should not censor information available to the public, scientists have a responsibility to inform the public. We must articulate what the scientific process is and why it is essential when considering the validity of information. Scientist are responsible for pointing out when public information has not been vetted through a scientific process and therefore cannot be considered conclusive. Scientists are responsible for highlighting information that has been generated and vetted with the scientific process. Over time, our goal is for the public to value the scientific process based on peer review. The public could become enlightened to the necessity for peer review to support decisions and action. Scientists need to contribute to advancing public knowledge. When invited to serve as a peer reviewer, scientists have a responsibility to contribute to the process. We all are extremely busy making peer review a distraction. While peer review does not directly benefit our own work and career, it benefits our chosen field of science. This is very important for the research area that our journal, Water-Energy Nexus, is focusing on. We cover the convergence of science and technology integrating across large spatial ranges (micro to global) in environmental pollution and the balance of remediation issues with energy use. Water-Energy Nexus wants to provide scientists with a platform for scientific debate and discussion on this rich and complicated topic. With the manuscripts submitted to WEN cover integrated research topics across a broad range of subjects from environment sciences through energy engineering, the role of peer review is essential. Peer review on a new submission to WEN should not be biased towards a specific science field. It should be done considering the complex nature of issues in the water-energy nexus. Scientists need to contribute to the public dialog. To accomplish these goals, we need to be honest, accurate, articulate, and use understandable language. The impact of WEN is very diverse affecting society in many ways. The scientific audience for WEN is diverse and readers may not fully understand the content of the papers outside their research expertise. Therefore, scientists, especially those who want to contribute to WEN, should work with communications specialists to convey message to benefit society. The audience includes the general public and researchers outside the author’s core specialty. While the peer-reviewed journal article is the cornerstone of our careers and critical for advancing scientific knowledge, a general interest story could benefit society even more. The author cannot lose sight that our work has two audiences, the science community, and more importantly, our family, friends, neighbors, and policy makers.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Asymmetric Electrode Work Function Customization via Top Electrode Replacement in Ferroelectric and Field–Induced Ferroelectric Hafnium Zirconium Oxide Thin Films

Non-volatile memory device structures such as ferroelectric random-access memory and ferroelectric tunnel junctions employ switchable spontaneous polarization to hold binary states. These devices can potentially benefit from the imposition of spontaneous internal biases and their resulting effect on the polarization properties of the ferroelectric (or field-induced ferroelectric/ antiferroelectric) layer. While HfO 2 -based thin films are ideal candidates for implementation into these devices due to their scalability and silicon compatibility, the phase purity of these oxides is sensitive to the selection of electrode material, preventing incorporation of asymmetric electrode layers into such structures. Within this work, electrode replacement following post-metallization anneal processing is introduced as a route to achieve ferroelectric and field-induced ferroelectric Hf x Zr 1–x O 2 (HZO) thin films with electrode-independent phase constitutions. The effects of this process and the corresponding internal biases imposed across the HZO layers due to asymmetric work functions are investigated. It is shown that internal biases vary in magnitude in accordance with prediction based on the work functions of the replaced electrode layers and affect remanent polarization magnitudes. Accordingly, electrode replacement presents a processing route that can readily produce HZO films with spontaneous internal biases and electrode- independent phase constitutions, facilitating implementation of these ferroelectrics into the next generation device structures.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Experimental progress and future plans on spherical tokamak, QUEST

QUEST (Q-shu university experiment with steady state spherical tokamak) aims at effective plasma current start-up and stable maintenance of plasma discharge. To solve the inherent problems in a spherical tokamak (ST) arising from insufficient space for placing the inductive center solenoid, electron cyclotron current drive (ECCD) and transient coaxial helicity injection (T-CHI) are implemented as a non-inductive plasma start-up method in QUEST. Efficient ECCD assisted by energetic electrons could be achieved. By combining control of the wave injection angle and application of a negative toroidal electric field, the bulk electron temperature could be raised up to 1 keV due to selective wave power absorption in the bulk electrons. The plasma current of over 50 kA contained within the closed flux surface could be obtained with a floating single biased electrode placed on lower divertor plates for T-CHI. Long-pulse operations on QUEST are impeded frequently due to wall saturation and subsequent density runaway caused by fuel particle imbalance. Since 2014, a unique tool called the ‘hot wall’ has been implemented to overcome the imbalance. The hot wall has a capability to regulate its surface temperature using a heater and two water cooling channels. With the help of the hot wall, 6 h discharges were obtained in 2020. Cooling down of the surface of the hot wall was significantly effective in recovering the wall pumping and was useful to extend the pulse duration. Augmentation of the toroidal magnetic field, B T up to 0.5 T from 0.25 T and a continuous wave (CW) gyrotron of 28 GHz are planned for QUEST in the near future. As raising B T provides a fundamental resonance of electron cyclotron waves (ECWs) with 28 GHz, more effective plasma current start-up and heating will be performed. Long-pulse operations with higher plasma parameters are expected.

QUEST↗
DOE OSTI2020

The STRong lensing Insights into the Dark Energy Survey (STRIDES) 2017/2018 follow-up campaign: discovery of 10 lensed quasars and 10 quasar pairs

Here, we report the results of the STRong lensing Insights into the Dark Energy Survey (STRIDES) follow-up campaign of the late 2017/early 2018 season. We obtained spectra of 65 lensed quasar candidates with ESO Faint Object Spectrograph and Camera 2 on the NTT and Echellette Spectrograph and Imager on Keck, confirming 10 new lensed quasars and 10 quasar pairs. Eight lensed quasars are doubly imaged with source redshifts between 0.99 and 2.90, one is triply imaged (DESJ0345-2545, z = 1.68), and one is quadruply imaged (quad: DESJ0053-2012, z = 3.8). Singular isothermal ellipsoid models for the doubles, based on high-resolution imaging from SAMI on Southern Astrophysical Research Telescope or Near InfraRed Camera 2 on Keck, give total magnifications between 3.2 and 5.6, and Einstein radii between 0.49 and 1.97 arcsec. After spectroscopic follow-up, we extract multi-epoch grizY photometry of confirmed lensed quasars and contaminant quasar + star pairs from DES data using parametric multiband modelling, and compare variability in each system’s components. By measuring the reduced χ 2 associated with fitting all epochs to the same magnitude, we find a simple cut on the less variable component that retains all confirmed lensed quasars, while removing 94 per cent of contaminant systems. Based on our spectroscopic follow-up, this variability information improves selection of lensed quasars and quasar pairs from 34-45 per cent to 51–70 per cent, with most remaining contaminants being star-forming galaxies. Using mock lensed quasar light curves we demonstrate that selection based only on variability will over-represent the quad fraction by 10 per cent over a complete DES magnitude-limited sample, explained by the magnification bias and hence lower luminosity/more variable sources in quads.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

Earth System Model Aerosol–Cloud Diagnostics (ESMAC Diags) package, version 2: assessing aerosols, clouds, and aerosol–cloud interactions via field campaign and long-term observations

Abstract. Poor representations of aerosols, clouds, and aerosol–cloud interactions (ACIs) in Earth system models (ESMs) have long been the largest uncertainties in predicting global climate change. Huge efforts have been made to improve the representation of these processes in ESMs, and the key to these efforts is the evaluation of ESM simulations with observations. Most well-established ESM diagnostics packages focus on the climatological features; however, they lack process-level understanding and representations of aerosols, clouds, and ACIs. In this study, we developed the Earth System Model Aerosol–Cloud Diagnostics (ESMAC Diags) package to facilitate the routine evaluation of aerosols, clouds, and ACIs simulated the Energy Exascale Earth System Model (E3SM) from the US Department of Energy (DOE). This paper documents its version 2 functionality (ESMAC Diags v2), which has substantial updates compared with version 1 (Tang et al., 2022a). The simulated aerosol and cloud properties have been extensively compared with in situ and remote-sensing measurements from aircraft, ship, surface, and satellite platforms in ESMAC Diags v2. It currently includes six field campaigns and two permanent sites covering four geographical regions: the eastern North Atlantic, the central US, the northeastern Pacific, and the Southern Ocean. These regions produce frequent liquid- or mixed-phase clouds, with extensive measurements available from the DOE Atmospheric Radiation Measurement user facility and other agencies. ESMAC Diags v2 generates various types of single-variable and multivariable diagnostics, including percentiles, histograms, joint histograms, and heatmaps, to evaluate the model representation of aerosols, clouds, and ACIs. Select examples highlighting the capabilities of ESMAC Diags are shown using E3SM version 2 (E3SMv2). In general, E3SMv2 can reasonably reproduce many observed aerosol and cloud properties, with biases in some variables such as aerosol particle and cloud droplet sizes and number concentrations. The coupling of aerosol and cloud number concentrations may be too strong in E3SMv2, possibly indicating a bias in processes that control aerosol activation. Furthermore, the liquid water path response to a perturbed cloud droplet number concentration behaves differently in E3SMv2 and observations, which warrants further study to improve the cloud microphysics parameterizations in E3SMv2.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Standard experimental paradigm designs and data exclusion practices in cognitive psychology can inadvertently introduce systematic “shadow” biases in participant samples

Abstract Standard cognitive psychology research practices can introduce inadvertent sampling biases that reduce the reliability and generalizability of the findings. Researchers commonly acknowledge and understand that any given study sample is not perfectly generalizable, especially when implementing typical experimental constraints (e.g., limiting recruitment to specific age ranges or to individuals with normal color vision). However, less obvious systematic sampling constraints, referred to here as “shadow” biases, can be unintentionally introduced and can easily go unnoticed. For example, many standard cognitive psychology study designs involve lengthy and tedious experiments with simple, repetitive stimuli. Such testing environments may 1) be aversive to some would-be participants (e.g., those high in certain neurodivergent symptoms) who may self-select not to enroll in such studies, or 2) contribute to participant attrition, both of which reduce the sample’s representativeness. Likewise, standard performance-based data exclusion efforts (e.g., minimum accuracy or response time) or attention checks can systematically remove data from participants from subsets of the population (e.g., those low in conscientiousness). This commentary focuses on the theoretical and practical issues behind these non-obvious and often unacknowledged “shadow” biases, offers a simple illustration with real data as a proof of concept of how applying attention checks can systematically skew latent/hidden variables in the included population, and then discusses the broader implications with suggestions for how to manage and reduce, or at a minimum acknowledge, the problem.

Siritzky, Emma M.↗
DOE OSTI2022

Dark Energy Survey year 3 results: Constraints on cosmological parameters and galaxy-bias models from galaxy clustering and galaxy-galaxy lensing using the redMaGiC sample

We constrain cosmological parameters and galaxy-bias parameters using the combination of galaxy clustering and galaxy-galaxy lensing measurements from the Dark Energy Survey (DES) year-3 data. We describe our modeling framework and choice of scales analyzed, validating their robustness to theoretical uncertainties in small-scale clustering by analyzing simulated data. Using a linear galaxy-bias model and redMaGiC galaxy sample, we obtain 10% constraints on the matter density of the Universe. Here, we also implement a nonlinear galaxy-bias model to probe smaller scales that includes parametrization based on hybrid perturbation theory and find that it leads to a 17% gain in cosmological constraining power. We perform robustness tests of our methodology pipeline and demonstrate stability of the constraints to changes in the theory model. Using the redMaGiC galaxy sample as foreground lens galaxies and adopting the best-fitting cosmological parameters from DES year-1 data, we find the galaxy clustering and galaxy-galaxy lensing measurements to exhibit significant signals akin to decorrelation between galaxies and mass on large scales, which is not expected in any current models. This likely systematic measurement error biases our constraints on galaxy bias and the S 8 parameter. We find that a scale-, redshift- and sky-area-independent phenomenological decorrelation parameter can effectively capture this inconsistency between the galaxy clustering and galaxy-galaxy lensing. We trace the source of this correlation to a color-dependent photometric issue and minimize its impact on our result by changing the selection criteria of redMaGiC galaxies. Using this new sample, our constraints on the S 8 parameter are consistent with previous studies and we find a small shift in the Ω m constraints compared to the fiducial redMaGiC sample. We infer the constraints on the mean host-halo mass of the redMaGiC galaxies in this new sample from the large-scale bias constraints, finding the galaxies occupy halos of mass approximately 1.6 × 10 13 M ⊙ /h.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

Toward Efficient Entropic Recycling by Mastering Ring–Chain Kinetics

Traditional chemical recycling approaches for condensation polymers suffer compounding energy losses and CO 2 emissions across multiple polymerization and depolymerization cycles. Entropic recycling can address these energy losses by entrapping free energy within the deconstruction products. Entropic recycling involves depolymerization to macrocyclic monomers, but such processes have not been feasible due to the high dilutions typically required to generate macrocyclic compounds. Here, we leverage selective catalysis to allow entropic recycling at concentrations 20–2000× higher than typical for macrocyclization reactions. We find that Ru-based olefin metathesis catalysts containing bulky iodine ligands significantly bias the ring–chain kinetic product distribution during ring-closing metathesis (RCM) toward the formation of oligomeric cycloalkenes. Further improvements in reaction concentration and macrocycle yield are obtained by using high catalyst loadings and by predisposing the alkene substrates to undergo favorable macrocyclization. These RCM optimizations translate effectively to cyclodepolymerization (CDP) of an olefin-containing polymer, with RCM and CDP affording similar macrocycle product distributions under identical reaction conditions. Macrocycle polymerization by entropy-driven ring-opening metathesis provides much higher molecular weight polymers than condensation polymerization of linear analogues, reducing the time to achieve high molecular weight from hours to minutes and enabling polymerization at room temperature. Finally, our findings re-emphasize the importance of energy consumption during a polymer’s lifecycle and provide a framework for the design of efficient entropic recycling systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Reversible and Selective CO 2 to HCO 2 − Electrocatalysis near the Thermodynamic Potential

Abstract Reversible catalysis is a hallmark of energy‐efficient chemical transformations, but can only be achieved if the changes in free energy of intermediate steps are minimized and the catalytic cycle is devoid of high transition‐state barriers. Using these criteria, we demonstrate reversible CO 2 /HCO 2 − conversion catalyzed by [Pt(depe) 2 ] 2+ (depe=1,2‐ bis (diethylphosphino)ethane). Direct measurement of the free energies associated with each catalytic step correctly predicts a slight bias towards CO 2 reduction. We demonstrate how the experimentally measured free energy of each step directly contributes to the <50 mV overpotential. We also find that for CO 2 reduction, H 2 evolution is negligible and the Faradaic efficiency for HCO 2 − production is nearly quantitative. A free‐energy analysis reveals H 2 evolution is endergonic, providing a thermodynamic basis for highly selective CO 2 reduction.

Cunningham, Drew W.↗
DOE OSTI2022

A critical comparison of CH∙∙∙π versus π∙∙∙π interactions in the benzene dimer: obtaining benchmarks at the CCSD(T) level and assessing the accuracy of lower scaling methods

In this study, we have established CCSD(T)/CBS (Complete Basis Set) limits for 3 stationary points on the benzene dimer potential energy surface, corresponding to the π∙∙∙π (parallel displaced or PD(C 2h ), minimum) and CH∙∙∙π (T-shaped or T(C 2v ), transition state) and tilted T-shaped (or TT(Cs), minimum) bonding scenarios considering both the structure and binding energy. The CCSD(T)/CBS binding energies are -2.65 ± 0.02 (PD), -2.74 ± 0.03 (T), and -2.83 ± 0.01 kcal mol -1 (TT). To this end, the CH∙∙∙π is ~0.2 kcal mol -1 stronger than the π∙∙∙π interaction, whereas the tilting of the CH donating benzene molecule with respect to the other benzene is worth 0.1 kcal mol -1 . As previously discussed in the literature, the MP2 level of theory does not provide a close match for either the energy or structure, yet the SCS-MP2 yields structures in excellent agreement with respect to the CCSD(T) result. It is found that the SCS-MI-MP2 also gives optimized structures very close to SCS-MP2 (within ~0.01 Å of the benchmark). Despite the closer match in structure, the spin-biased MP2 methods (SCS-, SCS-MI-, and SOS-MP2) incorrectly predict the relative stabilities of the isomers. That said, none of the spin biased MP2 methods offers a good compromise between energy and structure for the systems examined. Finally, the CCSD(T)/CBS benchmarks were used to assess the performance of 13 DFT functionals selected from different rungs of Jacob's ladder. Several functionals such as TPSS-D3, B3LYP-D3, B97-D, B97-D3, and B2PLYP-D3 provided a good description of the binding energies for both CH∙∙∙π and π∙∙∙π interactions, yielding values within 6% of the CCSD(T)/CBS benchmark values. Unlike the MP2 methods, these functionals correctly predict the relative stability of the PD(C 2h ) and T(C 2v ) dimers. Further, we find that there is no systematic improvement as Jacob's ladder is ascended (increased complexity of functional). The best functionals that result in a good compromise between structure and energy accuracy are B97-D3 and B2PLYP-D3 for both the CH∙∙∙π and π∙∙∙π interaction. Despite the impressive performance of these functionals, a challenge that remains is ensuring the transferability of these density functionals in accurately describing the interaction between dimers of larger aromatic molecules, the latter requiring high-level benchmarks for these systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Cross-correlation of Planck CMB lensing with DESI-like LRGs

ABSTRACT Cross-correlations between the lensing of the cosmic microwave background (CMB) and other tracers of large-scale structure provide a unique way to reconstruct the growth of dark matter, break degeneracies between cosmology and galaxy physics, and test theories of modified gravity. We detect a cross-correlation between Dark Energy Spectroscopic Instrument (DESI)-like luminous red galaxies (LRGs) selected from DECam Legacy Survey imaging and CMB lensing maps reconstructed with the Planck satellite at a significance of S/N = 27.2 over scales ℓmin = 30, ℓmax = 1000. To correct for magnification bias, we determine the slope of the LRG cumulative magnitude function at the faint limit as s = 0.999 ± 0.015, and find corresponding corrections of the order of a few per cent for $C^{\kappa g}_{\ell }, C^{gg}_{\ell }$ across the scales of interest. We fit the large-scale galaxy bias at the effective redshift of the cross-correlation zeff ≈ 0.68 using two different bias evolution agnostic models: a HaloFit times linear bias model where the bias evolution is folded into the clustering-based estimation of the redshift kernel, and a Lagrangian perturbation theory model of the clustering evaluated at zeff. We also determine the error on the bias from uncertainty in the redshift distribution; within this error, the two methods show excellent agreement with each other and with DESI survey expectations.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Prioritizing local and remote memory access in a non-uniform memory access architecture

A miss in a cache by a thread in a wavefront is detected. The wavefront includes a plurality of threads that are executing a memory access request concurrently on a corresponding plurality of processor cores. A priority is assigned to the thread based on whether the memory access request is addressed to a local memory or a remote memory. The memory access request for the thread is performed based on the priority. In some cases, the cache is selectively bypassed depending on whether the memory access request is addressed to the local or remote memory. A cache block is requested in response to the miss. The cache block is biased towards a least recently used position in response to requesting the cache block from the local memory and towards a most recently used position in response to requesting the cache block from the remote memory.

Boyer, Michael W.↗