Search NASA⌕ Search

SEARCH · Search NASA

Results for “Simulation and Modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

Quench process modeling & simulation in the heat-treatment of critical aerospace components

To manufacture light-weight, advanced metal alloy components for gas turbine engines, quench heat-treatment processes are typically used. By quenching the component from elevated temperatures, the alloy sometimes undergoes a solid-state phase transformation which produces special microstructures with the required, enhanced mechanical properties. However, the quenching can also lead to cracks forming in the component. Addressing the quench cracking problems adds a significant burden to the cost, schedule, and energy demand of manufacture. Currently, optimizing the quench process to mitigate or avoid the cracking is performed largely by trial-and-error, relying heavily on costly experimental (thermocouple)trials to understand the local thermal gradients which cause the cracks to form. In this first part (Phase 1) of the work, high-performance computing is employed to establish the ability of modern CFD (computational fluid dynamics) to alleviate or wholly replace the experimental quenching trials by virtual testing. A Baseline CFD model is defined and its accuracy established to be comparable to(and which usually exceeds) the accuracy of existing HTC (heat-transfer coefficient) based simulation methods of quenching. As a first-principles based approach, “calibration” of the Baseline CFD model is independent of the quench process itself, but instead relies on the accuracy of the underlying (modeled),generic two-phase fluid processes which cannot be currently resolved by CFD for large, industrial-scale cases. A novel, high-fidelity DNS capability has been developed and verified to examine and further improve upon the mean-field closure submodels on which the Baseline CFD approach is based.1

99 GENERAL AND MISCELLANEOUS↗

Finite element model-simulation-based characterization of a magnetostrictive gyrosensor

This paper analyzes a prototype microgyrosensor that employs the magnetostrictive alloy Galfenol for transduction of Coriolis-induced forces into an electrical output for quantifying a given angular velocity. The magnetic induction distribution in the Galfenol sensor patch depends on its bending shape and magnetoelastic properties and is investigated using a finite element model. Fluctuations in magnetic induction caused by a sinusoidal rotation of the sensor produce an amplitude modulated voltage in a surrounding coil which is simulated and measured.

36 MATERIALS SCIENCE↗

Quench process modeling & simulation in the heat-treatment of critical aerospace components

To manufacture light-weight, advanced metal alloy components for gas turbine engines, quench heat-treatment processes are typically used. By quenching the component from elevated tempera-tures, the alloy sometimes undergoes a solid-state phase transformation which produces special microstructures with the required, enhanced mechanical properties. However, the quenching can also lead to cracks forming in the component. Addressing the quench cracking problems adds a significant burden to the cost, schedule, and energy demand of manufacture. Currently, optimizing the quench process to mitigate or avoid the cracking is performed largely by trial-and-error, relying heavily on costly experimental (thermocouple) trials to understand the local thermal gradients which cause the cracks to form. In this first part (Phase 1) of the work, high-performance computing is employed to establish the ability of modern CFD (computational fluid dynamics) to alleviate or wholly replace the experimental quenching trials by virtual testing. A baseline CFD model is defined and its accuracy established to be comparable to (and which usually exceeds) the accuracy of existing HTC (heat-transfer correlation) based simulation methods of quenching. As a first-principles based approach, “calibration” of the Baseline CFD model is independent of the quench process itself, but instead relies on the accuracy of the underlying (modeled), generic two-phase fluid processes which cannot be currently resolved by CFD for large, industrial-scale cases. A novel, high-fidelity DNS capability has been developed and verified to examine and further improve upon the mean-field closure submodels on which the Baseline CFD approach is based.

36 MATERIALS SCIENCE↗

Northern Hemisphere Snow Drought in Earth System Model Simulations and ERA5‐Land Data in 1980–2014

Abstract Low snow levels over the past few decades and predictions of a low‐to‐no snow future have spurred research into snow droughts, which pose a threat to water security and management. Systematic data‐model comparisons of snow drought have been lacking, hindering our understanding of the drivers of snow drought in the past. To address this gap, we analyzed snow drought events using standardized snow water equivalent index derived from monthly results of four numerical experiments using the E3SM Land Model (ELM) and ERA5‐Land data during the period of 1980–2014. Additionally, we compared snow drought duration calculated from models with those from the ERA5‐Land data during selected El Niño‐Southern Oscillation (ENSO) years. The numerical experiments were conducted with ELM driven by two prescribed atmospheric forcings, and with the coupled land‐atmosphere configuration of E3SM with and without plant hydraulics scheme feedback. Analysis reveals that 20%–30% of snow droughts occur due to factors other than above‐normal temperature and low snowfall, such as low soil moisture, warm soil temperature, and low relative humidity, etc., especially in high latitudes (50° North). Furthermore, our study highlights the exacerbating effect of ENSO events on snow drought conditions in various regions, despite some discrepancies between model and ERA5‐Land results. We also identified limitations of the coupled land‐atmosphere models in our current configuration in capturing the spatial patterns of snow droughts. This study underscores the challenge of predicting and mitigating snow drought and the need for a comprehensive understanding of the factors contributing to snow drought.

54 ENVIRONMENTAL SCIENCES↗

Regional-Scale Climate Change: Observations and Model Simulations

This collaborative proposal addressed key issues in understanding the Earth's climate system, as highlighted by the U.S. Climate Science Program. The research focused on documenting past climatic changes and on assessing future climatic changes based on suites of global and regional climate models. Geographically, our emphasis was on the mountainous regions of the world, with a particular focus on the Neotropics of Central America and the Hawaiian Islands. Mountain regions are zones where large variations in ecosystems occur due to the strong climate zonation forced by the topography. These areas are particularly susceptible to changes in critical ecological thresholds, and we conducted studies of changes in phonological indicators based on various climatic thresholds.

54 ENVIRONMENTAL SCIENCES↗

Level-set Modeling Simulations of Chemical Vapor Infiltration for Ceramic Matrix Composites Manufacturing

Silicon-carbide (SiC) reinforced ceramic matrix composites (CMCs) are a key enabling technology to reduce fuel consumption and emissions of gas turbine engines. In one manufacturing approach, chemical vapor infiltration (CVI) is limited to only coating SiC fibers. The preform is then fabricated using a lay-up of basic plys or 2-D woven sheets composed of the precoated fibers. At the other extreme, CVI is used to completely densify a 3-D woven preform shaped almost like the gas turbine component itself. The latter approach is more suitable for highly engineered components which sit directly in the gas path of the engine, for example, a high pressure turbine blade. In this case, the geometry is necessarily complex for aerodynamic, stress, and lifing (multi-physics) requirements. Presently, optimizing the CVI-dominated manufacturing approach is largely by trial-and-error. In this work, a first-principles modeling of CVI is performed to realize optimization of SiC/SiC CMC manufacturing. The modeling is based on a level-set framework to describe the interface between the vapor and solid phases. A finite-difference numerical scheme using an immersed boundary method is developed for fixed, structured meshes. Massively parallel direct numerical simulations (DNS) of CVI through fiber-woven geometries are performed using one-step chemistry, and over a range of Thiele moduli. Illustrative applications of the resulting large DNS data sets are given, including the development of fiber-weave specific infiltration models and structure functions for mean-field (porous media) Computational Fluid Dynamics (CFD) simulations of CVI.

36 MATERIALS SCIENCE↗

Spatial distribution of melt-season cloud radiative effects over Greenland: Evaluating satellite observations, reanalyses, and model simulations against in situ measurements

Arctic clouds can profoundly influence surface radiation and thus surface melt. Over Greenland, these cloud radiative effects (CRE) vary greatly with the diverse topography. To investigate the ability of assorted platforms to reproduce heterogeneous CRE, we evaluate CRE spatial distributions from a satellite product, reanalyses, and a global climate model against estimates from 21 automatic weather stations (AWS). Net CRE estimated from AWS generally decreases with elevation, forming a “warm center” distribution. CRE areal averages from the five large–scale data sets we analyze are all around 10 W/m 2 . Modern–Era Retrospective Analysis for Research and Applications version 2 (MERRA–2), ERA–Interim, and Clouds and the Earth's Radiant Energy System (CERES) CRE estimates agree with AWS and reproduce the warm center distribution. However, the National Center for Atmospheric Research Arctic System Reanalysis (ASR) and the Community Earth System Model Large ENSemble Community Project (LENS) show strong warming in the south and northwest, forming a warm L–shape distribution. Discrepancies are mainly caused by longwave CRE in the accumulation zone. MERRA–2, ERA–Interim, and CERES successfully reproduce cloud fraction and its dominant positive influence on longwave CRE in this region. On the other hand, longwave CRE from ASR and LENS correlates strongly with ice water path instead of with cloud fraction or liquid water path. Moreover, ASR overestimates cloud fraction and LENS underestimates liquid water path substantially, both with limited spatial variability. MERRA–2 best captures the observed interstation changes, captures most of the observed cloud–radiation physics, and largely reproduces both albedo and cloud properties. Furthermore, the warm center CRE spatial distribution indicates that clouds enhance surface melt in the higher accumulation zone and reduce surface melt in the lower ablation zone.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Agroecosystem model simulations reveal spatial variability in relative productivity in biomass sorghum and maize in Iowa, USA

Biomass sorghum (Sorghum bicolor L. Moench) is an annual C 4 grass that has emerged as a candidate bioenergy crop but has not been widely grown in the United States. Corn (Zea mays L.), another annual C 4 grass, has been produced on a large scale in the United States for biofuels. Iowa leads the nation in both corn and ethanol production. The high productivity of corn in Iowa creates the research question: could biomass sorghum be as or more productive than corn in the state in terms of bioenergy? Efforts to use crop models to fill the gaps left by field experimentation on biomass sorghum have also been limited thus far. To address our research question, we collected biophysical data on biomass sorghum grown in Iowa for two growing seasons, used them to develop a biomass sorghum module in an agroecosystem model (Agro-IBIS), and predict the potential performance of biomass sorghum across Iowa compared to maize. Despite dry conditions in 2019 and 2020, average biomass sorghum yields were 17.20 Mg ha –1 . By comparison, average corn aboveground biomass was higher in 2020 (22.02 Mg ha –1 ). Soil cores indicated average belowground biomass of 1.46 Mg ha –1 , with roots concentrated near the surface (73% of biomass above 50 cm in a 1 m core). When biomass sorghum model parameters were calibrated with measured values, model output was in close agreement with measured biomass (slope = 0.932, R 2 = 0.91) and evapotranspiration (slope = 0.757, R 2 = 0.64). Subsequent regional simulations revealed a notable latitudinal gradient in biomass sorghum yield, with a strong linear relationship between yield and seasonal growing degree-days (R 2 = 0.89). When these yields were compared to simulated corn aboveground biomass yields, only 3.4% of the state had biomass sorghum yields that were significantly higher than corn. This number was reduced to 0.3% when comparing the crops in terms of energy ethanol yield. Thus, we conclude biomass sorghum must be improved to be competitive with corn as an annual biofuel crop in Iowa. This study provides a baseline against which to compare advancements in sorghum breeding for biomass and stress tolerance in Iowa.

Agro-IBIS↗

Biofuels and water quality: challenges and opportunities for simulation modeling

Quantification of the various impacts of biofuel feedstock production on hydrology and water quality is complex. Mathematical models can be used to efficiently evaluate various what if scenarios related to biofeedstock production and their impacts on hydrology and water quality at various spatial and temporal scales. Currently available models, although having the potential to serve such purposes, have many limitations. In this paper, we review the strengths and weaknesses of such models in light of short- and long term biofeedstock production scenarios. The representation of processes in the currently available models and how these processes need to be modified to fully evaluate various complex biofeedstock production scenarios are discussed. Similarly, issues related to availability of data that are needed to parameterize and evaluate these models are presented. We have presented a vision for the development of decision support tools and ecosystem services that can be used to make watershed management decisions to minimize any potentially adverse environmental impacts while meeting biofeedstock demands. We also discuss a case study of biofeedstock impact simulation in relation to watershed management policy implications for various state and federal agencies in the USA.

09 BIOMASS FUELS↗

Decoding the dynamics of poleward shifting climate zones using aqua-planet model simulations

Growing evidence indicates that the atmospheric and oceanic circulation experiences a systematic poleward shift in a warming climate. However, the complexity of the climate system, including the coupling between the ocean and the atmosphere, natural climate variability and land-sea distribution, tends to obfuscate the causal mechanism underlying the circulation shift. Here, using an idealised coupled aqua-planet model, we explore the mechanism of the shifting circulation, by isolating the contributing factors from the direct CO 2 forcing, the indirect ocean surface warming, and the wind-stress feedback from the ocean dynamics. We find that, in contrast to the direct CO 2 forcing, ocean surface warming, in particular an enhanced subtropical ocean warming, plays an important role in driving the circulation shift. This enhanced subtropical ocean warming emerges from the background Ekman convergence of surface anomalous heat in the absence of the ocean dynamical change. Additionally, it expands the tropical warm water zone, causes a poleward shift of the mid-latitude temperature gradient, hence forces a corresponding shift in the atmospheric circulation and the associated wind pattern. The shift in wind, in turn drives a shift in the ocean circulation. Our simulations, despite being idealised, capture the main features of the observed climate changes, for example, the enhanced subtropical ocean warming, poleward shift of the patterns of near-surface wind, sea level pressure, storm tracks, precipitation and large-scale ocean circulation, implying that increase in greenhouse gas concentrations not only raises the temperature, but can also systematically shift the climate zones poleward.

54 ENVIRONMENTAL SCIENCES↗

An attractive model: simulating fuzzy dark matter with attractive self-interactions

ABSTRACT Fuzzy dark matter (FDM), comprised of ultralight ($m \sim 10^{-22}\,{\rm eV}$) boson particles, has received significant attention as a viable alternative to cold dark matter (CDM), as it approximates CDM on large scales (${\gtrsim}1$ Mpc) while potentially resolving some of its small-scale problems via kiloparsec-scale quantum interference. However, the most basic FDM model, with one free parameter (the boson mass), is subject to a tension: small boson masses yield the desired cores of dwarf galaxies but underpredict structure in the Lyman-α forest, while large boson masses render FDM effectively identical to CDM. This Catch-22 problem may be alleviated by considering an axion-like particle with attractive particle self-interactions. We simulate an idealized FDM halo with self-interactions parametrized by an energy decay constant $f \sim 10^{15}~\rm {GeV}$ related to the axion symmetry-breaking conjectured to solve the strong-CP problem in particle physics. We observe solitons, a hallmark of FDM, condensing within a broader halo envelope, and find that the density profile and soliton mass depend on self-interaction strength. We propose generalized formulae to extend those from previous works to include self-interactions. We also investigate a critical mass threshold predicted for strong interactions at which the soliton collapses into a compact, unresolved state. We find that the collapse happens quickly, and its effects are initially contained to the central region of the halo.

Painter, Connor A. (ORCID:0000000235314806)↗

Energy Consumption and Cost Reduction of Future Light-Duty Vehicles through Advanced Vehicle Technologies: A Modeling Simulation Study Through 2050

The U.S. Department of Energy’s (DOE’s) Vehicle Technologies Office (VTO) and Hydrogen and Fuel Cell Technologies Office (HFTO) aim to develop sustainable, affordable and efficient technologies for transportation of goods and people. Translating investments in advanced transportation component technologies and powertrains to estimate vehicle-level fuel savings potential is critical for understanding DOE’s impact. In this work, we simulated technologies funded by VTO and HFTO for light duty vehicles. The simulations were performed across: Multiple powertrain configurations (i.e., conventional, power-split, extended-range electric vehicle, battery electric drive, and fuel-cell vehicles), Vehicle classes (i.e., compact car, midsize car, small sport utility vehicle [SUV], midsize SUV, and pickup trucks); and Fuels (i.e., gasoline, diesel, hydrogen, and battery electricity). These various technologies are assessed for six different timeframes: laboratory years 2015, 2020, 2025, 2030, and 2045. A delay of 5 years is assumed between laboratory year and model year (year technology is introduced into production). Finally, uncertainties are included for both technology performance and cost aspects by considering two cases: Low case, aligned with DOE technology manager estimates of expected original equipment manufacturer (OEM) improvements based on regulations, business as usual; and High case, aligned with aggressive technology advancements based on R&D targets developed through support by VTO & HFTO. These scenarios are not intended as predictions of future performances. The energy and cost impact of different technologies were estimated using Autonomie (www.autonomie.net), Argonne vehicle system simulation tool. Autonomie is a state-of-the-art vehicle system simulation tool used to assess the energy consumption, performance and cost of multiple advanced vehicle technologies across classes (from light to heavy duty), powertrains (from conventional to HEVs, FCEVs, PHEVs and BEVs), components and control strategies. Autonomie is packaged with a complete set of vehicle models for a wide range of vehicle classes, powertrain configurations and component technologies, including vehicle level and component level controls. These controls were developed and calibrated using dynamometer test data. Autonomie has been used to support a wide range of studies including analyzing various component technologies, sizing powertrains components for different vehicle requirements, comparing the benefits of powertrain configurations, optimizing both heuristic and route based vehicle energy control and predicting transportation energy use when paired with a traffic modeling tool such as POLARIS. This report documents the assumptions and estimates the vehicle-level energy consumption benefits and associated technology costs for the various types of light duty vehicles. All details of vehicle assumptions and simulation results are available in the spreadsheets accompanying this report.

33 ADVANCED PROPULSION SYSTEMS↗

Toward a new parameterization of hydraulic conductivity in climate models: Simulation of rapid groundwater fluctuations in N orthern C alifornia

Abstract Preferential flow through weathered bedrock leads to rapid rise of the water table after the first rainstorms and significant water storage (also known as “rock moisture”) in the fractures. We present a new parameterization of hydraulic conductivity that captures the preferential flow and is easy to implement in global climate models. To mimic the naturally varying heterogeneity with depth in the subsurface, the model represents the hydraulic conductivity as a product of the effective saturation and a background hydraulic conductivity K bkg , drawn from a lognormal distribution. The mean of the background K bkg decreases monotonically with depth, while its variance reduces with the effective saturation. Model parameters are derived by assimilating into Richards’ equation 6 years of 30 min observations of precipitation (mm) and water table depths (m), from seven wells along a steep hillslope in the Eel River watershed in Northern California. The results show that the observed rapid penetration of precipitation and the fast rise of the water table from the well locations, after the first winter rains, are well captured with the new stochastic approach in contrast to the standard van Genuchten model of hydraulic conductivity, which requires significantly higher levels of saturated soils to produce the same results. “Rock moisture,” the moisture between the soil mantle and the water table, comprises 30% of the moisture because of the great depth of the weathered bedrock layer and could be a potential source of moisture to sustain trees through extended dry periods. Furthermore, storage of moisture in the soil mantle is smaller, implying less surface runoff and less evaporation, with the proposed new model.

58 GEOSCIENCES↗

Discrete sensing and actuation in a simulation model of frequency responsive loads

Loads acting autonomously on a local frequency signal can improve the response of a power system to sudden changes in supply, demand, or both. In this paper we address the use of load for regulating frequency by using feedback control. We extend prior research that focused on continuous proportional control, whereby one assumes that the load responds instantaneously, continuously, and in direct proportion to the changing frequency. However, sensors employed in any practical system have a finite sensitivity which introduces quantization effects into the control. As a result, a critical factor in the design of such a control is the relationship between the sensitivity of the sensor and the gain of the actuator. To study this issue, our model is constructed in two parts. The continuous dynamics of the power system is coupled to discrete event models of the sensors by state events that describe the detection points available to them. The quantized signals from the sensors are transformed by the actuators into discrete changes of load which, in turn, change the frequency and thereby complete the control loop. We illustrate the model with a scenario that involves a sudden, unanticipated change in load and the combined response of the control and power system to recover from the event.

24 POWER TRANSMISSION AND DISTRIBUTION↗