Search NASA⌕ Search

SEARCH · Search NASA

Results for “Single Layer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

Coherent diffractive imaging of single layer microspheres

We report the extreme ultraviolet (XUV) coherent diffractive imaging of silica/polymer micro-particle samples illuminated by a table-top high harmonic generation source at the wavelength of 30 nm. We achieve images constructed from diffraction patterns acquired with 13 μm × 13 μm samples comprising a sparse monolayer of spherical silica and polymer micro-particles. Successful reconstructed image of an aperiodic sample using this HHG source will open the path to the realization of a compact soft x-ray microscope to investigate other complex absorbing samples.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Electronic, structural, and substrate effect properties of single-layer covalent organic frameworks

Recently synthesized two-dimensional covalent organic frameworks (COFs) exhibit high surface area, large pore size, and unique structural architectures, making them promising materials for various energy applications. Here, a total of nine COFs structures, including two deposited on a hexagonal boron nitride substrate, are investigated using density functional theory, quasi-particle many-body theory within the GW approximation, and an image charge model. The structures considered belong to two major families (thiophene-based COF-n (T-COF-n) and tetrakis (4-aminophenyl) porphyrin-x (TAPP-x)) differing from the presence of B—O or C=N linkers. While T-COF-n structures are shown to constitute planar networks, TAPP-x systems can display non-negligible corrugation due to the out-of-plane rotation of phenyl rings. We find that the electronic properties do not differ significantly when altering the chain molecules within each family. Many-body effects are shown to lead to large band-gap increase while the presence of the substrate yields appreciable reductions of the gaps, due to substrate polarization effects.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Influence of interfacial oxide on the optical properties of single layer CdTe/CdS quantum dots in porous silicon scaffolds

Using a combination of continuous wave and time-resolved spectroscopy, we study the effects of interfacial conditions on the radiative lifetimes and photoluminescence intensities of sub-monolayer colloidal CdTe/CdS quantum dots (QDs) embedded in a three-dimensional porous silicon (PSi) scaffold. The PSi matrix was thermally oxidized under different conditions to change the interfacial oxide thickness. QDs embedded in a PSi matrix with ∼0.4 nm of interfacial oxide exhibited reduced photoluminescence intensity and nearly five times shorter radiative lifetimes (∼16 ns) compared to QDs immobilized within completely oxidized, porous silica (PSiO{sub 2}) frameworks (∼78 ns). The exponential dependence of QD lifetime on interfacial oxide thickness in the PSi scaffolds suggests charge transfer plays an important role in the exciton dynamics.

36 MATERIALS SCIENCE↗

Ultra-thin, single-layer polarization rotator

We demonstrate light polarization control over a broad spectral range by a uniform layer of vanadium dioxide as it undergoes a phase transition from insulator to metal. Changes in refractive indices create unequal phase shifts on s- and p-polarization components of incident light, and rotation of linear polarization shows intensity modulation by a factor of 10{sup 3} when transmitted through polarizers. This makes possible polarization rotation devices as thin as 50 nm that would be activated thermally, optically or electrically.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Coexistence of soft and hard magnetic phases in single layer amorphous Tb–Co thin films

Amorphous, ferrimagnetic Tb-Co thin films prepared with a thin Ta underlayer and either a Ta or a Pt overlayer show evidence of both soft and hard magnetic phases. At room temperature, the films exhibit conventional ferromagnetism, but low temperature magnetometry measurements reveal the decoupling of the two magnetic phases with decreasing temperature due to increased anisotropy energy of the hard layer at lower temperatures. Decreasing the film thickness to 2 nm, slightly above the superparamagnetic limit found at 1 nm, a soft, low-density phase was isolated and found to be present in all the films as confirmed with x-ray reflectivity and Rutherford backscattering spectrometry measurements. For greater thicknesses, the bottom layer retains its soft magnetic nature, while the remainder of the film is denser and has strong perpendicular magnetic anisotropy, leading to the exchange-spring behavior when the anisotropy becomes large, either at low temperatures or via a Pt overlayer that adds a strong interfacial anisotropy to the layer. Micromagnetic simulations of a soft/hard bilayer model with the experimentally determined anisotropy and magnetization parameters into a soft/hard bilayer model reproduced the experimental hysteretic behavior very well. These findings demonstrate how the magnetic state and the response of a-Tb-Co films to external fields can be controlled, providing a high degree of tunability that is promising for high-performance nanoscale devices.

36 MATERIALS SCIENCE↗

Single layer graphene protective layer on GaAs photocathodes for spin-polarized electron source

GaAs-based photocathodes are the primary choice for polarized electron sources, commonly used in polarized electron microscopes and polarized positron sources. GaAs photocathodes are typically activated with cesium and oxygen, which are highly reactive and require an ultra-high vacuum (⁠~ 10 -11 Torr or lower) to operate reliably, resulting in substantial operational difficulties. A short exposure to a mediocre vacuum results in an instantaneous loss of cathode quantum efficiency (QE) due to the chemical reaction of the active layer with residual gas molecules or back-bombardment ions during operation. Covering the GaAs cathode with a 2D material, such as monolayer graphene, could provide protection against such damage due to the inhibition of chemical reactions with residual gas molecules. In this paper, we have incorporated a method known as intercalation to pass the active material underneath the graphene and activate the superlattice GaAs/GaAsP (SL-GaAs) photocathode. X-ray photoelectron spectroscopy, low-energy electron microscopy, and Mott scattering measurements were performed to evaluate the formation of the photocathode under graphene, as well as its spectral response and electron spin polarization. Our results demonstrate that the successful activation of the SL-GaAs photocathode with a graphene protection layer is achieved with a moderate QE. Furthermore, we found that the electron spin polarization of the cathode with a surface protection layer is higher than the conventional cathode without a protection layer.

2D materials↗

Tailoring the optical properties of MoS 2 and WS 2 single layers via organic functionalization

Tailoring the structural and electronic properties of 2D materials is fundamental to boost their use in a wide range of technological applications. In this paper, by means of first principles simulations, we show how methyl functionalization of MoS2 and WS2 monolayers can be employed to change their energy gap, tune their optoelectronic properties and modify the relative stability of their structural phases (or polytypes). In particular for both compound monolayers, we find that the most stable semiconducting H phase becomes metallic upon methyl functionalization, while in the metastable T' phase the band gap increases as a function of the –CH3 coverage; correspondingly the phase stability is reversed and the on-set of the optical absorption is blue-shifted.

Palummo, M.↗

Ab initio investigation of single-layer high thermal conductivity boron compounds

The discovery and design of materials with large thermal conductivities (κ L ) is important to address future heat management challenges, particularly as devices shrink to the nanoscale. This requires developing novel physical insights into the microscropic interactions and behaviors of lattice vibrations. In this work, we use ab initio phonon Boltzmann transport calculations to derive fundamental understanding of lattice thermal transport in two-dimensional (2D) monolayer hexagonal boron-based compounds, h-BX (X=N, P, As, Sb). Monolayer h-BAs, in particular, possesses structural and dispersion features similar to bulk cubic BAs and 2D graphene, which govern their ultrahigh room temperature κ L (1300 W/m K and 2000–4000 W/m K, respectively), yet here combine to give significantly lower κ L for monolayer h-BAs (400 W/m K at room temperature). This report explores this discrepancy, and thermal transport in the monolayer h-BX systems in general, via comparison of the microscopic mechanisms that govern phonon transport. Specifically we present calculations of phonon dispersions, velocities, scattering phase space and rates, and κ L of h-BX monolayers as a function of temperature, size, defects, and other fundamental parameters. From these calculations, we make predictions of the thermal conductivities of h-BX monolayers, and more generally develop deeper fundamental understanding of phonon thermal transport in 2D and bulk materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Calculated Properties of Fully Hydrogenated Single Layers of BN, BC2N, and Graphene: Graphane and Its BN-Containing Analogues

Carbon is an attractive material for hydrogen adsorption, due to its light weight, variety of structures, and ability to both physisorb and chemisorb hydrogen. Recently, fully hydrogenated graphene layers ( graphane ) have been predicted to exist [J.O. Sofo et al., Phys. Rev. B 75, 15340 (2007)], and experimentally observed [D.C. Elias et al., Science 323, 610 (2009)]. In this work, we examine analogues of graphane, in particular BNH2 and BC2NH4. Unlike graphene, these materials have a band gap without hydrogenation. Our results indicate that the hydrogenation product of BN is metastable: the fully hydrogenated compound BNH2 is higher in energy than hexagonal BN sheets plus H2 molecules, in sharp contrast with graphane. We find that BC2NH4 is energetically very close to hexagonal BC2N+2H2 molecules. Furthermore our examination of the relative binding strengths of rows of symmetry related hydrogen atoms on BC2NH4shows that this compound is marginally higher in energy than BC2NH2 plus an H2 molecule, with the hydrogen atoms in BC2NH2 absorbed on the carbon sites. These remaining hydrogen atoms are not as strongly bound as in graphane, indicating that the average hydrogen chemisorption energy is controllable by changing the carbon content in the B-C-N layer.

08 HYDROGEN↗

Crystallization Dynamics of a Single Layer Complex Plasma

We report a series of complex (dusty) plasma experiments, aimed at the study of the detailed time evolution of the recrystallization process following a rapid quench of a two-dimensional dust liquid. The experiments were accompanied by large-scale (million-particle) molecular dynamics simulations, assuming Yukawa-type interparticle interaction. Both experiment and simulation show a {proportional_to}t{sup {alpha}} (power-law) dependence of the linear crystallite domain size as measured by the bond-order correlation length, translational correlation length, dislocation (defect) density, and a direct size measurement algorithm. The results show two stages of order formation. On short time scales, individual particle motion dominates; this is a fast process characterized by {alpha}=0.93{+-}0.1. At longer time scales, small crystallites undergo collective rearrangement, merging into bigger ones, resulting in a smaller exponent {alpha}=0.38{+-}0.06.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗