Search NASA⌕ Search

SEARCH · Search NASA

Results for “Solar Aspect”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

Ion-Neutral Coupling in Solar Prominence

Coupling between ions and neutrals in magnetized plasmas is fundamentally important to many aspects of heliophysics, including our ionosphere, the solar chromosphere, the solar wind interaction with planetary atmospheres, and the interface between the heliosphere and the interstellar medium. Ion-neutral coupling also plays a major role in the physics of solar prominences. By combining theory, modeling, and observations we are working toward a better understanding of the structure and dynamics of partially ionized prominence plasma. Two key questions are addressed in the present work: 1) what physical mechanism(s) sets the cross-field scale of prominence threads? 2) Are ion-neutral interactions responsible for the vertical flows and structure in prominences? We present initial results from a study investigating what role ion-neutral interactions play in prominence dynamics and structure. This research was supported by NASA.

Gilbert, H.↗

ENERGY RELEASE FROM IMPACTING PROMINENCE MATERIAL FOLLOWING THE 2011 JUNE 7 ERUPTION

Solar filaments exhibit a range of eruptive-like dynamic activity, ranging from the full or partial eruption of the filament mass and surrounding magnetic structure as a coronal mass ejection to a fully confined or failed eruption. On 2011 June 7, a dramatic partial eruption of a filament was observed by multiple instruments on board the Solar Dynamics Observatory (SDO) and Solar-Terrestrial Relations Observatory. One of the interesting aspects of this event is the response of the solar atmosphere as non-escaping material falls inward under the influence of gravity. The impact sites show clear evidence of brightening in the observed extreme ultraviolet wavelengths due to energy release. Two plausible physical mechanisms for explaining the brightening are considered: heating of the plasma due to the kinetic energy of impacting material compressing the plasma, or reconnection between the magnetic field of low-lying loops and the field carried by the impacting material. By analyzing the emission of the brightenings in several SDO/Atmospheric Imaging Assembly wavelengths, and comparing the kinetic energy of the impacting material (7.6 × 10{sup 26}-5.8 × 10{sup 27} erg) to the radiative energy (≈1.9 × 10{sup 25}-2.5 × 10{sup 26} erg), we find the dominant mechanism of energy release involved in the observed brightening is plasma compression.

79 ASTRONOMY AND ASTROPHYSICS↗

Energy Release from Impacting Prominence Material Following the 2011 June 7 Eruption

Solar filaments exhibit a range of eruptive-like dynamic activity, ranging from the full or partial eruption of the filament mass and surrounding magnetic structure as a coronal mass ejection to a fully confined or failed eruption. On 2011 June 7, a dramatic partial eruption of a filament was observed by multiple instruments on board the Solar Dynamics Observatory (SDO) and Solar-Terrestrial Relations Observatory. One of the interesting aspects of this event is the response of the solar atmosphere as non-escaping material falls inward under the influence of gravity. The impact sites show clear evidence of brightening in the observed extreme ultraviolet wavelengths due to energy release. Two plausible physical mechanisms for explaining the brightening are considered: heating of the plasma due to the kinetic energy of impacting material compressing the plasma, or reconnection between the magnetic field of low-lying loops and the field carried by the impacting material. By analyzing the emission of the brightenings in several SDO/Atmospheric Imaging Assembly wavelengths, and comparing the kinetic energy of the impacting material (7.6 × 10(exp 26) - 5.8 × 10(exp 27) erg) to the radiative energy (approx. 1.9 × 10(exp 25) - 2.5 × 10(exp 26) erg), we find the dominant mechanism of energy release involved in the observed brightening is plasma compression.

Sun: corona↗

Arrays of ultrathin silicon solar microcells

Provided are solar cells, photovoltaics and related methods for making solar cells, wherein the solar cell is made of ultrathin solar grade or low quality silicon. In an aspect, the invention is a method of making a solar cell by providing a solar cell substrate having a receiving surface and assembling a printable semiconductor element on the receiving surface of the substrate via contact printing. The semiconductor element has a thickness that is less than or equal to 100 .mu.m and, for example, is made from low grade Si.

14 SOLAR ENERGY↗

Arrays of ultrathin silicon solar microcells

Provided are solar cells, photovoltaics and related methods for making solar cells, wherein the solar cell is made of ultrathin solar grade or low quality silicon. In an aspect, the invention is a method of making a solar cell by providing a solar cell substrate having a receiving surface and assembling a printable semiconductor element on the receiving surface of the substrate via contact printing. The semiconductor element has a thickness that is less than or equal to 100 .mu.m and, for example, is made from low grade Si.

14 SOLAR ENERGY↗

Physical mechanisms of solar activity effects in the middle atmosphere

A great variety of physical mechanisms of possibly solar induced variations in the middle atmosphere has been discussed in the literature during the last decades. The views which have been put forward are often controversial in their physical consequences. The reason may be the complexity and non-linearity of the atmospheric response to comparatively weak forcing resulting from solar activity. Therefore this review focuses on aspects which seem to indicate nonlinear processes in the development of solar induced variations. Results from observations and numerical simulations are discussed.

Ebel, A.↗

Carrier-Transport Imaging of Cadmium Telluride Intra- and Inter-Grains

Inhomogeneous local minority-carrier transport in thin-film solar cells is a critical aspect for the device operation. In this work, we applied a transport imaging (TI) technique to the intra- and inter-grain carrier-transport properties of cadmium telluride (CdTe) solar cell materials. We compared the TI results with cathodoluminescence and electron backscatter diffraction (EBSD) on the same CdTe thin film. The diffusion lengths of two distinct grain interiors were measured directly, and the values are significantly different. Three types of grain boundaries (GBs) determined by EBSD were studied by TI, and they have different decays, suggesting that different GB structure can be responsible for carrier-transport properties. Further, we did a 2D analytical simulation of carrier diffusion across GBs with varying GB lifetimes. The results suggest that GB lifetimes affect the carrier transport. Comparison of multiple technique results, together with numerical simulation, provides a deeper understanding of carrier-transport properties.

14 SOLAR ENERGY↗

The solar minimum X2.6/1B flare and CME of 9 July 1996: Propagation - Pt 2

The interplanetary propagation aspects of the first X-class solar flare and coronal mass ejection are discussed. The solar data relevant to this event are summarized. Data from WIND and charge element and isotope analysis system (CELIAS) show solar wind plasma and interplanetary magnetic field disturbances early on 12 July 1996. It was observed that the extrapolation of the coronal mass ejection back to the flare time suggests a close association between them. Moreover, the coronal mass ejection speed is similar to the type two shock's speed. The results suggest that the coronal mass ejection is intimately related to the shock itself.

Dryer, M.↗

Advantages of thin silicon solar cells for use in space

A system definition study on the Solar Power Satellite System showed that a thin, 50 micrometers, silicon solar cell has significant advantages. The advantages include a significantly lower performance degradation in a radiation environment and high power-to-mass ratios. The advantages of such cells for an employment in space is further investigated. Basic questions concerning the operation of solar cells are considered along with aspects of radiation induced performance degradation. The question arose in this connection how thin a silicon solar cell had to be to achieve resistance to radiation degradation and still have good initial performance. It was found that single-crystal silicon solar cells could be as thin as 50 micrometers and still develop high conversion efficiencies. It is concluded that the use of 50 micrometer silicon solar cells in space-based photovoltaic power systems would be advantageous.

Denman, O. S.↗

New aspects of the cosmic-ray modulation in 1974-1975 near solar minimum

Residual cosmic-ray modulation at or near the solar minima of 1965 and 1972-75 is compared on the basis of ground-based and satellite observations of nonrelativistic proton and helium components as well as variations in the relativistic component. It is found that the nonrelativistic fluxes lagged behind the high-energy fluxes to form a hysteresis loop over the period from 1965 to 1973, that the 1975 proton fluxes were about 85% higher than the 1972 level and about 35% higher than the 1965 level, and that the 1975 helium fluxes were about 60% higher than in 1965. Some unique recovery events are discussed, and a time-lag effect dependent on magnetic rigidity is examined which was associated with dynamic changes in the heliosphere. A qualitative explanation is offered for the hysteresis effect.

Garcia-Munoz, M.↗

Study of Umbrella-Type Erectable Paraboloidal Solar Concentrators for Generation of Spacecraft Auxiliary Power

An investigation was made of some aspects of erectable umbrella-type paraboloidal solar-energy concentrators for use in spacecraft auxiliary power systems. An analysis is presented for the design of concentrators employing radial ribs and membrane-type coverings. The rib stiffness necessary to give a desired parabolic curvature upon erection is determined. Rib contour measurements were made in an upright and inverted position on an experimental 10-foot-diameter concentrator giving a focal length of 30.78 inches and 30.6 inches, respectively, as compared with a design focal length of 30 inches. Calorimetric tests employing spherical heat receivers showed a maximum geometrical concentrator efficiency of 75.3 percent with a concentration ratio of 92.2 at a focal length of approximately 30.5 inches. Within the scope of this investigation, it was found that, as the concentrator size increases, the weight per unit projected area increases, time to damp to one-half amplitude increases, and the natural frequency decreases. Umbrella-type solar concentrators appear to be feasible for power conversion systems using low concentration ratios; however, for large concentrators the time required to damp out disturbances may be a problem.

SPACECRAFT↗

Nanowire Photovoltaic Devices

Firefly Technologies, in collaboration with the Rochester Institute of Technology and the University of Wisconsin-Madison, developed synthesis methods for highly strained nanowires. Two synthesis routes resulted in successful nanowire epitaxy: direct nucleation and growth on the substrate and a novel selective-epitaxy route based on nanolithography using diblock copolymers. The indium-arsenide (InAs) nanowires are implemented in situ within the epitaxy environment-a significant innovation relative to conventional semiconductor nanowire generation using ex situ gold nanoparticles. The introduction of these nanoscale features may enable an intermediate band solar cell while simultaneously increasing the effective absorption volume that can otherwise limit short-circuit current generated by thin quantized layers. The use of nanowires for photovoltaics decouples the absorption process from the current extraction process by virtue of the high aspect ratio. While no functional solar cells resulted from this effort, considerable fundamental understanding of the nanowire epitaxy kinetics and nanopatterning process was developed. This approach could, in principle, be an enabling technology for heterointegration of dissimilar materials. The technology also is applicable to virtual substrates. Incorporating nanowires onto a recrystallized germanium/metal foil substrate would potentially solve the problem of grain boundary shunting of generated carriers by restricting the cross-sectional area of the nanowire (tens of nanometers in diameter) to sizes smaller than the recrystallized grains (0.5 to 1 micron(exp 2).

Forbes, David↗

Parametric study of two planar high power flexible solar array concepts

The design parameters examined were: frequency, aspect ratio, packaging constraints, and array blanket flatness. Specific power-to-mass ratios for both solar arrays as a function of array frequency and array width were developed and plotted. Summaries of the baseline design data, developed equations, the computer program operation, plots of the parameters, and the process for using the information as a design manual are presented.

Garba, J. A.↗

Exploring the Predictability of the High-Energy Tail of MEE Precipitation Based on Solar Wind Properties

Medium Energy Electron (MEE) precipitation (≳30 keV) ionizes the mesosphere and initiates chemical reactions, which ultimately can reduce mesospheric and stratospheric ozone. Currently, there are considerable differences in how existing parameterizations represent flux response, timing, and duration of MEE precipitation, especially considering its high-energy tail (≳300 keV). This study compares the nature of ≳300 to ≳30 keV electron fluxes to better understand differences within MEE precipitation. The MEE fluxes are estimated from measurements by the Medium Energy Proton and Electron Detector (MEPED) onboard the Polar Orbiting Environmental Satellite (POES) from 2004 to 2014. The fluxes are explored in the context of solar wind drivers: corotating high-speed solar wind streams (HSSs) and coronal mass ejections (CMEs) alongside their associated solar wind properties. Three key aspects of ≳300 keV electron fluxes are investigated: maximum response, peak timing, and duration. The results reveal a structure-dependent correlation (0.89) between the peak fluxes of ≳30 and ≳300 keV electrons. The epsilon coupling function correlates well (0.84) with the ≳300 keV peak flux, independent of solar wind structure. The ≳300 keV flux peaks 0–3 days after the ≳30 keV flux peaks. The highest probability (∼42%) occurs for a 1-day delay, while predictive capabilities increase when accounting for solar wind speed. The ≳300 keV flux response has the highest probability of lasting 4 days for both CMEs and HSSs. The results form a base for a stochastic MEE parameterization that goes beyond the average picture, enabling realistic flux variability on both daily and decadal scales.

J A Salice↗

Variability of Clouds Over a Solar Cycle

One of the most controversial aspects of climate studies is the debate over the natural and anthropogenic causes of climate change. Historical data strongly suggest that the Little Ice Age (from 1550 to 1850 AD when the mean temperature was colder by about 1 C) was most likely caused by variability of the sun and not greenhouse molecules (e.g., CO2). However, the known variability in solar irradiance and modulation of cosmic rays provides too little energy, by many orders of magnitude, to lead to climate changes in the troposphere. The conjecture is that there is a 'trigger mechanism'. This idea may now be subjected to a quantitative test using recent global datasets. Using the best available modern cloud data from International Satellite Cloud Climatology Project (ISCCP), Svensmark and Friis-Christensen found a correlation of a large variation (3-4%) in global cloud cover with the solar cycle. The work has been extended by Svensmark and Marsh and Svensmark. The implied forcing on climate is an order of magnitude greater than any previous claims. Are clouds the long sought trigger mechanism? This discovery is potentially so important that it should be corroborated by an independent database, and, furthermore, it must be shown that alternative explanations (i.e., El Nino) can be ruled out. We used the ISCCP data in conjunction with the Total Ozone Mapping Spectrometer (TOMS) data to carry out in in depth study of the cloud trigger mechanism.

Yung, Yuk L.↗

Analysis of Solar Spectral Irradiance Measurements from the SBUV/2-Series and the SSBUV Instruments

The purpose of this research is to develop a NOAA-11 SBUV/2 solar spectral irradiance data set which is free from long-term instrument drift, then perform scientific analysis using the data set. During the current period of performance, 29 February 1996 through 31 August 1996, we finalized the NOAA-11 SBUV/2 characterization using internal data. This included updating the instrument's electronic, photomultiplier tube gain, wavelength, diffuser degradation, and goniometric calibrations. We have also completed the SSBUV characterization, 1989-1994, and produced SSBUV irradiances for the first seven SSBUV flights. Both of these steps were needed before the long-term calibration of the NOAA-11 SBUV/2 solar spectral irradiance data set via SSBUV can be undertaken. A second major aspect of this work is to compare solar spectral irradiances from the SBUV/2 instruments and SSBUV with corresponding data from other instruments. In the preceding six months, SSBUV data from the ATLAS-3 (November 1994) mission were compared to coincident SUSIM ATLAS-3 data. The GOME instrument was launched by the European Space Agency in early 1995 and began making solar irradiance measurements in May 1995. Working with GOME scientists, we are using SSBUV data to validate the GOME solar irradiance data. Based in part on those findings, the GOME absolute calibration data were reanalyzed.

Cebula, Richard P.↗

The Rise of US Photovoltaics: An Exploration of Land Use Density Trends in Large‐Scale Solar Facility Attributes, 2012–2021

An energy transition is underway in the United States; renewable energy generation is now on par with coal and nuclear generation. The number of large-scale solar photovoltaic facilities increased approximately tenfold between 2012 and 2021, with an associated 25-fold increase in cumulative installed capacity. With ambitious decarbonization and renewable energy deployment goals at both the federal and state levels, deployments of large-scale solar photovoltaic facilities will continue apace. This growth is likely to be complex with ripples of impacts felt throughout different aspects of society, and thus accurate solar land use metrics allowing more accurate predictions are of value to policymakers, planners, and other stakeholders in the future photovoltaic build-out. In this paper, we leverage data from the newly released US Large-Scale Solar Photovoltaic Database to examine recent trends in large-scale solar photovoltaic land use. We analyze the relationships between solar array capacity density (W/acre) and a range of facility attributes to better understand the future land requirements of solar capacity expansion over the coming years. Installed capacity was the single strongest determinant of solar array area. However, we found substantial variation in capacity density across facility attributes, including mount type, latitude, urbanicity, time, and prior land use.

14 SOLAR ENERGY↗

Feasibility study of a 110 watt per kilogram lightweight solar array system

The feasibility of a 10,000 watt solar array panel which has a minimum power-to-mass ratio of 110 watt/kg is discussed. The application of this ultralightweight solar array to three possible missions was investigated. With the interplanetary mission as a baseline, the constraining requirements for a geosynchronous mission and for a manned space station mission are presented. A review of existing lightweight solar array system concepts revealed that changes in the system approach are necessary to achieve the specified 110 watt/kg goal. A comprehensive review of existing component technology is presented in the areas of thin solar cells, solar cell covers, welded interconnectors, substrates and deployable booms. Advances in the state-of-the-art of solar cell and deployable boom technology were investigated. System level trade studies required to select the optimum boom bending stiffness, system aspect ratio, bus voltage level, and solar cell circuit arrangement are reported. Design analysis tasks included the thermal analysis of the solar cell blanket, thermal stress analysis of the solar cell interconnectors/substrate, and the thermostructural loading of the deployed boom.

Shepard, N. F.↗