Search NASA⌕ Search

SEARCH · Search NASA

Results for “Solar cells Surfaces”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Perovskite Solar Cells with Enhanced Fill Factors Using Polymer-Capped Solvent Annealing

Despite huge improvements in power conversion efficiencies of perovskite solar cells, the technology is still limited by fill factors at around 80%. In this work, we report perovskite solar cells having exceptionally high fill factors of 85% and enhanced open-circuit voltage without sacrificing short-circuit current through a polymer-capped solvent-annealing process assisted by a hot air blower. Additionally, during the solvent-annealing, the perovskite surface flattens and the perovskite grains agglomerate into micrometer-sized clusters having enlarged α-phase crystallites, while the δ-phase simultaneously disappears. The optimized structure reduces energetic disorder and trap-assisted recombination in the perovskite layer, resulting in an enhanced efficiency from 18.2% to 19.8% and improved device lifetime. Our results provide a pathway to increase the device efficiency and stability of perovskite solar cells, and have the potential to stimulate research on scalable poly-crystal perovskite layer fabrication in optoelectronic devices.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2021

UV-Induced Degradation of High-Efficiency Solar Cells with Different Architectures

The ultraviolet-induced degradation (UVID) of solar panels is associated with the deterioration of cell performance and reduced reliability of packaging materials. Here we examine the UV stability of different architectures of high-efficiency solar cells without any encapsulation. Identical UV exposure tests were performed at two different labs using UVA-340 fluorescent lamps under different electrical bias configurations (open- or short-circuit) and irradiated cell surfaces (for bifacial technologies). Cell technologies, including heterojunction (HJ), interdigitated back-contact cells (IBC), passivated emitter rear contact (PERC), passivated emitter rear totally-diffused (PERT), are found to be more susceptible to UVID, leading to significant Isc loss (up to 4%) and P max loss (up to 15%) as compared to the conventional back surface field (Al-BSF) cells after exposure to UV irradiation of 8.92 MJ-m -2 -nm -1 at 340 nm. Additionally, the bifacial cells when irradiated from the backside exhibited greater photocurrent loss compared to the front side exposure, indicating potential sensitivity of rear surface passivation to UV radiation.

crystalline silicon↗
DOE OSTI2023

Incorporating Potassium Citrate to Improve the Performance of Tin‐Lead Perovskite Solar Cells

Abstract Easy‐to‐form tin vacancies at the buried interface of tin‐lead perovskites hinder the performance of low‐bandgap perovskite solar cells (PSCs). Here, a synergistic strategy by incorporating potassium citrate (PC) into the poly(3,4‐ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) hole‐transport layer to passivate the buried interface of Sn‐Pb PSCs is reported. PC neutralizes the acidity of PEDOT:PSS and stabilizes the perovskite front surface, enhancing device stability. Citrate moieties coordinate with Sn 2+ on the buried perovskite surface, preventing Sn 2+ oxidation and suppressing defect formation. Additionally, potassium cations incorporate into Sn‐Pb perovskites, enhancing crystallinity and passivating halide defects. The combined benefits enable efficient low‐bandgap Sn‐Pb PSCs with a power conversion efficiency of 22.7% and a high open‐circuit voltage of 0.894 V. Using this method, 26.1% efficiency for all‐perovskite tandem solar cells is demonstrated. These results emphasize the significance of buried interface passivation in developing efficient and stable Sn‐Pb PSCs and all‐perovskite tandem solar cells.

14 SOLAR ENERGY↗
DOE OSTI2020

Bidentate Lewis bases are preferred for passivation of MAPbI 3 surfaces: A time-domain ab initio analysis

We report chemical passivation is a predominant approach to inhibit intrinsic defects responsible for electron–hole recombination in perovskite solar cells. Using time-domain density functional theory combined with nonadiabatic molecular dynamics, we demonstrate defect passivation by separation of electrons and holes in metal halide perovskites (MHPs), and show that bidentate ligands exhibit the best performance. Defects in traditional semiconductors create deep midgap states, and passivation eliminates these states. In contrast, common defects produce no deep midgap states in MHPs. Instead, defects localize electrons and holes around defect sites, enhancing electron–hole interaction. Defect passivation in MHPs acts to separate charges, decreasing electron–hole and charge–phonon interactions, and increasing charge lifetimes. Bidentate ligands work best, because they can passivate both unsaturated chemical bonds created due to vacancy defects. Bidentate ligands with spatially separated binding sites are preferred, since they provide better match to the sparse inorganic lattice of MHPs. Similar to the Lewis base ligands, water also acts as a ligand and extends charge lifetimes, with the oxygen atom donating its lone electron pair to the defect site. However, water accelerates chemical degradation of MHPs. The binding energy of most ligands is larger than that of water, and therefore, the ligands displace water, increase MHP stability and prolong carrier lifetimes. The established physical mechanism of defect passivation, and the specific principles guiding the choice of passivating molecules advance our understanding of the exceptional properties of MHPs and suggest routes for further improvement of MHP performance in solar energy and optoelectronic applications.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Isolating p- and n-Doped Fingers With Intrinsic Poly-Si in Passivated Interdigitated Back Contact Silicon Solar Cells

Polycrystalline silicon on silicon oxide (poly-Si/SiO x ) passivating contacts enable ultra high efficiency interdigitated back contact silicon solar cells. To prevent shunt between n- and p-type doped fingers, an insulating region is required between them. We evaluate the use of intrinsic poly Si for this isolation region. Interdigitated fingers were formed by plasma deposition of doped hydrogenated amorphous silicon through mechanically aligned shadow masks, on top of a full-area intrinsic amorphous silicon layer. High temperature annealing then crystallized the a-Si:H to poly Si and drove in the dopants. Two mechanisms were identified which cause contamination of the intrinsic poly Si gap during processing. During deposition of doped fingers, we show using secondary ion mass spectrometry and conductivity measurements that the intrinsic gap becomes contaminated by doped a-Si:H tails several nanometers thick to concentrations of ~10 20 cm -3 . Another source of contamination occurs during high-temperature annealing, where dopants desorb from doped regions and readsorb onto intrinsic a Si:H. Both pathways reduce the resistivity of the intrinsic gap from ~10 5 Ω·cm to ~10 -1 Ω·cm. We show that plasma etching of the a-Si:H surface before crystallizing with a capping layer can eliminate the contamination of the intrinsic poly-Si, maintaining a resistivity of ~10 5 Ω·cm. Lastly, this demonstrates masked plasma deposition as a dopant patterning method for Si solar cells.

14 SOLAR ENERGY↗
DOE OSTI2021

Mitigation of the internal p-n junction in CoS 2 -contacted FeS 2 single crystals: Accessing bulk semiconducting transport

Pyrite FeS 2 is an outstanding candidate for a low-cost, nontoxic, sustainable photovoltaic material, but efficient pyrite-based solar cells are yet to materialize. Recent studies of single crystals have shed much light on this by uncovering a p-type surface inversion layer on n-type (S-vacancy doped) crystals, and the resulting internal p-n junction. This leaky internal junction likely plays a key role in limiting efficiency in pyrite-based photovoltaic devices, also obscuring the true bulk semiconducting transport properties of pyrite crystals. Here, we demonstrate complete mitigation of the internal p-n junction in FeS 2 crystals by fabricating metallic CoS 2 contacts via a process that simultaneously diffuses Co (a shallow donor) into the crystal, the resulting heavy n doping yielding direct Ohmic contact to the interior. Low-temperature bulk transport studies of controllably Co- and S-vacancy doped semiconducting crystals then enable a host of previously inaccessible observations and measurements, including determination of donor activation energies (which are as low as 5 meV for Co), observation of an unexpected second activated transport regime, realization of electron mobility up to 2100 cm 2 V –1 s –1 , elucidation of very different mobilities in Co- and S-vacancy-doped cases, and observation of an abrupt temperaturedependent crossover to bulk Efros-Shklovskii variable-range hopping, accompanied by an unusual form of nonlinear Hall effect. Aspects of the results are interpreted with the aid of first-principles electronic structure calculations on both Co- and S-vacancy-doped FeS 2 . Furthermore, this work thus demonstrates unequivocal mitigation of the internal p-n junction in pyrite single crystals, with important implications for both future fundamental studies and photovoltaic devices

36 MATERIALS SCIENCE↗
DOE OSTI2021

High-Efficiency, Low-Cost III-V Solar Cells by Dynamic Hydride Vapor Phase Epitaxy Coupled with Rapid, Polishing-Free Wafer Reuse through Orientation-Optimized (110) Spalling

We demonstrated (110) GaAs solar cells grown by D-HVPE with equivalent performance and material quality relative to (100) devices. Also, we developed a procedure for repeatable wafer-scale spalling of (110) GaAs. Spalled surfaces were free of the facets founds in (100) GaAs spalling, the large arrest lines found in (100) Ge spalling, and surface features greater than 3 µm in peak-to-valley height, which can otherwise degrade the efficiency of regrown III-V devices. A sub-µm step-terrace morphology was discovered on the post-spall wafer surface, resulting from the restricted cleavage system of GaAs, but we developed understanding of the factors that determine the resulting morphology, enabling ample opportunity for optimization of morphologies suitable for device growth and spall depth waste minimization on (110) GaAs. Lastly, we demonstrated a device grown on a previously spalled surface with only 8% relative efficiency difference to a cell grown on a new unspalled wafer. Significant optimization of the substrate regrowth conditions are required to enable higher efficiency, but these results highlight the promise of (110)-oriented devices coupled with substrate reuse by spalling as a pathway for low-cost III-V photovoltaics.

14 SOLAR ENERGY↗
DOE OSTI2021

Modeling and Understanding of Rear Junction Double-Side Passivated Contact Solar Cells with Selective Area TOPCon on Front

Device modeling is performed to propose > 25% efficient industry-compatible rear junction double-side passivated contacts solar cell structure with full area p-TOPCon on the rear and selective area n-TOPCon under the front grid pattern (selective TOPCon). Here, this design enables the use of thicker TOPCon (>100nm) on the front for traditional screen-printed contacts without incurring metal-induced damage, high parasitic absorption loss, and compromise in lateral transport or carrier collection on the front. Rear junction design with appropriate bulk lifetime and resistivity combination eliminate the need for heavy doping in the front field region because carriers can flow through the bulk Si without appreciable FF loss. High VOC is maintained because high-quality Si surface passivation in the field region by Al 2 O 3 /SiN gives J 0 comparable to the TOPCon. Our device modeling specifies the practically achievable properties and parameters for each region, including full area rear p-TOPCon, selective area front n-TOPCon, bulk and contacts, to achieve 25.4% efficiency screen-printed bifacial rear junction selective TOPCon cells.

14 SOLAR ENERGY↗
DOE OSTI2022

Cross-Cutting Metrology Tools for In Operando Characterization of Carrier Dynamics in Photovoltaic Devices (Final Technical Report)

Understanding the nature of recombination and its dependence on defects and interfaces is essential for engineering materials and contacts for higher V oc and photovoltaic (PV) efficiency. Time-resolved photoluminescence (TRPL) has conventionally been used to evaluate recombination, but not all materials are strongly emissive or otherwise suitable. Time-resolved terahertz spectroscopy is a pump – probe method that presents valuable complementary information, wherein an optical pump pulse photoexcites carriers within the absorber and the transient photoconductivity is probed with a terahertz pulse. Until now, experimental constraints have prohibited the use of terahertz probes to interrogate full device stacks, and measurements were instead made on exfoliated films or films grown on unconventional substrates. However, interfaces are critical to the behavior of photoexcited carriers in solar cells, and the substrates themselves often influence the film growth and bulk properties. Therefore, it is important to probe the behavior of PV absorbers as close as possible to their normal operating conditions. Here we have developed cross-cutting metrology that enable in operando characterization of carrier dynamics and recombination mechanisms in working PV devices. Through a combination of complementary non-contact TRTS and TRPL experiments and modeling, we have obtained key parameters including photoexcited carrier bulk lifetime and interface and back surface recombination velocities with greater precision and accuracy than can be achieved with conventional TRPL alone. By varying pulsed photoexcitation conditions, the contributions of interface and bulk recombination mechanisms can be determined. We have developed and refined this characterization approach by investigating CdTe PVs, which is a well-established technology but with significant margin for further improvements in efficiency. Results were published in Journal of Applied Physics (DOI: 10.1063/5.0064730) and Proceedings of the IEEE PVSC (DOI: 10.1109/PVSC43889.2021.9518559). After validating the approach, we have applied it to correlate recombination rates to processing conditions and material properties, including composition and defects as well as interfaces and surface treatments. Such feedback can inform processing and design choices to enable higher PV efficiency, not only for CdTe, but also CdSe x Te 1-x , CIGS, perovskites, kesterites, and future technologies. A perspective on predicting solar cell performance from terahertz spectroscopy was published in Advanced Energy Materials (DOI: 10.1002/aenm.202102776). The cross-cutting metrology tools developed here will enable determination of the locus and mechanism of performance-limiting recombination in thin film PV devices. This feedback can guide the engineering of PV devices with higher V oc and efficiency, thereby leading to reductions in levelized cost of electricity to meet the SunShot 2030 target of $0.03/kWh for utility-scale PV. Lower costs will enable rapid expansion of renewable electricity generation that is nearly free of carbon emissions. Reducing carbon emissions of the electricity sector is one of the most important solutions to climate change. The project’s specific focus on CdTe PV can benefit First Solar, the US company that is the global leader in CdTe technology, through both technology and workforce development.

14 SOLAR ENERGY↗
DOE OSTI2024

Double Perovskite Interlayer Stabilized Highly Efficient Perovskite Solar Cells

Metal halide perovskite solar cell (PSC) technology has an impressive power conversion efficiency (PCE) exceeding 26.1% and demonstrates cost-effective manufacturing. However, the stability of these PSCs poses a significant challenge, hindering their widespread manufacturing and commercialization. To tackle the degradation issue inherent in PSCs, surface passivation techniques, particularly employing a thin layer of two-dimensional (2D) perovskites, create a 2D/3D heterostructure. Beyond this, the exploration of metal halide double perovskites adds a new dimension to the chemical and band gap phase space of materials for optoelectronic applications. In this study, we leverage a wide band gap double perovskite interlayer to enhance the stability of 3D metal halide perovskite. Specifically, the double perovskite nanoparticle Cs 2 AgBiBr 6 , with its substantial band gap of 2.2 eV and exceptional air stability, is utilized. Through optimization, a Cs 2 AgBiBr 6 -treated PSC achieves an open-circuit voltage of 1.12 V and an impressive PCE of 19.52%. Additionally, the Cs 2 AgBiBr 6 passivation layer proves to be effective in bolstering the stability of PSCs. This work demonstrates an additional strategy and design motif to simultaneously increase the PCE of PSCs along with achieving improved stability.

14 SOLAR ENERGY↗
DOE OSTI2021

Wide-Gap Perovskite via Synergetic Surface Passivation and Its Application toward Efficient Stacked Tandem Photovoltaics

Superior bandgap tunability enables solution-processed halide perovskite a promising candidate for multi-junction photovoltaics (PVs). Particularly, optically coupling wide-gap perovskite by stacking with commercially available PVs such as silicon and CIGS (also known as 4-terminal tandem) simplifies the technology transfer process, and further advances the commercialization potential of perovskite technology. However, compared with matured PV materials and the phase-pure FAPbI 3 , wide-gap perovskite still suffers from huge voltage deficits. Here, the authors take advantage of the synergetic effect behind a sequential fluoride and organic ammonium salt surface passivation strategy to control non-radiative energy losses, and obtained a 17.7% efficiency in infrared-transparent wide-gap perovskite solar cells (21.1% for opaque device), and achieved efficiencies of over 25% when stacked with commercial Si and CIGS products with original PCEs of 18–20% under a 4-terminal working condition.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Semi-transparent p-type barium copper sulfide as a back contact interface layer for cadmium telluride solar cells

Optically transparent p-type materials play a critical role in transparent electronics including photovoltaic (PV) devices. P-type sulfide materials offer an alternative to oxides for PV application due to improved hole transport properties. Here, we report the solution-based synthesis of earth-abundant p-type transparent conducting barium copper sulfide (α-BaCu 4 S 3 , BCS) thin films. These films were characterized using scanning electron microscopy, X-ray diffraction, UV–Vis–NIR spectrophotometry, Raman spectroscopy, and spectroscopic ellipsometry. BCS films of ~100 nm thickness transmit >70% of visible light. We report on tests of the hole transport properties of these BCS films for cadmium telluride (CdTe) photovoltaics, finding that the BCS deposition process forms a beneficial tellurium (Te) rich surface on CdTe by selectively removing Cd from the surface. Based on our study, the BCS interface layer plays dual functions for CdTe PV devices as a hole transport material and as an etchant, enhancing the resulting device performance. We observed a significant increase in open-circuit voltage of CdTe solar cells with the BCS buffer layer. Furthermore, we discuss semitransparent CdTe solar cells with BCS as a hole transport layer and indium tin oxide as a finishing electrode. Semitransparent CdTe solar cells shows 13.3% conversion efficiency for the front side illumination and 1.2% efficiency for back side illumination, indicating high recombination of charge carriers generated close to the rear CdTe/BCS/ITO contact.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Colloidal Quantum Dot Solar Cells: Progressive Deposition Techniques and Future Prospects on Large-area Fabrication

Colloidally grown nanosized semiconductors yield extremely high-quality optoelectronic materials. Many examples have pointed to near perfect photoluminescence quantum yields, meaning non-radiative optical processes (losses) can be completely suppressed allowing for technology-leading materials as high purity color centers in display technology and emitters in LEDs. Furthermore, because of high chemical yield, and improved understanding of the surfaces, these materials, particularly colloidal quantum dots (QDs) can also be ideal candidates for other optoelectronic applications. Given the strong drive toward carbon neutrality and limiting climate change, electricity from solar photovoltaics will play a large role in the power generation sector. QDs have been developed and shown dramatic improvements over the past 15 years as photoactive materials in photovoltaics and have unique potential with various innovative deposition properties which could lead to exceptionally low-cost and high-performance devices. Once the key issues related to charge transport in optically thick arrays are addressed, QD-based photovoltaic technology could become a better candidate for practical application. In this article, w e show how the possibilities of different deposition techniques could bring QD-based solar cells to the industrial level and discuss the challenges for perovskite QD solar cells in particular, to achieve large-area fabrication for further advancing technology to solve pivotal energy and environmental issues.

14 SOLAR ENERGY↗
DOE OSTI2023

Solvent-Mediated Formation of Quasi-2D Dion-Jacobson Phases on 3D Perovskites for Inverted Solar Cells Over 23% Efficiency

2D-on-3D (2D/3D) perovskite heterostructures present a promising strategy to realize efficient and stable photovoltaics. However, their applicability in inverted solar cells is limited due to the quantum confinement of the 2D-layer and solvent incompatibilities that disrupt the underlying 3D layer, hampering electron transport at the 2D/3D interface. Herein, solvent-dependent formation dynamics and structural evolution of 2D/3D heterostructures are investigated via in situ X-ray scattering. In this study, it is revealed that solvent interaction with the 3D surface determines the formation sequence and spatial distribution of quasi-2D phases with n = 2–4. Isopropanol (IPA) reconstructs the perovskite into a PbI 2 -rich surface, forming a strata with smaller n first, followed by a thinner substratum of larger n. In contrast, 2,2,2-Trifluoroethanol (TFE) preserves the 3D surface, promoting the formation of uniformly distributed larger n domains first, and smaller n last. Leveraging these insights, Dion–Jacobson perovskites are used with superior charge transport properties and structural robustness to fabricate 2D/3D heterostructures dominated by n ≥ 3 and engineer a favorable energy landscape for electron tunneling. Inverted solar cells based on 3-Aminomethylpyridine and TFE achieve a champion efficiency of 23.60%, with V oc and FF of 1.19 V and 84.5%, respectively, and superior stabilities with t 94 of 960 h under thermal stress.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2020

Multi-cation perovskites prevent carrier reflection from grain surfaces

The composition of perovskite has been optimized combinatorially such that it often contains six components (A x B y C 1-x-y PbX z Y 3-z ) in state-of-art perovskite solar cells. Questions remain regarding the precise role of each component, and the lack of a mechanistic explanation limits the practical exploration of the large and growing chemical space. Here, aided by transient photoluminescence microscopy, we find that, in perovskite single crystals, carrier diffusivity is in fact independent of composition. In polycrystalline thin films, the different compositions play a crucial role in carrier diffusion. In this work, we report that methylammonium (MA)-based films show a high carrier diffusivity of 0.047 cm 2 s -1 , while MA-free mixed caesium-formamidinium (CsFA) films exhibit an order of magnitude lower diffusivity. Elemental composition studies show that CsFA grains display a graded composition. This curtails electron diffusion in these films, as seen in both vertical carrier transport and surface potential studies. Incorporation of MA leads to a uniform grain core-to-edge composition, giving rise to a diffusivity of 0.034 cm 2 s -1 in CsMAFA films. A model that invokes competing crystallization processes allows us to account for this finding, and suggests further strategies to achieve homogeneous crystallization for the benefit of perovskite optoelectronics.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Carbazole-Based Hole Transport Polymer for Methylammonium-Free Tin-Lead Perovskite Solar Cells with Enhanced Efficiency and Stability

As the most commonly used hole transport material (HTM) in tin-lead (Sn-Pb) perovskite solar cells (PSCs), poly(3,4-ethylenedioxythiophene) polystyrenesulfonate (PEDOT:PSS) limits the power conversion efficiency (PCE) and stability of the PSCs due to its acidic characteristics. Herein, an easily synthesized polymer HTM poly[(phenyl)imino[9-(2-ethylhexyl)carbazole]-2,7-diyl] (CzAn) with a shallow highest occupied molecular orbital (HOMO) level of -4.95 eV is used in a p-i-n structure, methylammonium-free, Sn-Pb PSC to replace PEDOT:PSS. Upon optimization using doping and surface engineering, high quality Sn-Pb PSCs could be successfully fabricated, boosting the PCE to 22.6% (stabilized PCE of 21.3%) compared with 21.2% for PEDOT:PSS. The perovskite films prepared on the modified CzAn HTM possess improved crystallinity, reduced trap-state density, and larger carrier mobility resulting in PSCs with greatly improved stability.

carrier mobility↗