Search NASA⌕ Search

SEARCH · Search NASA

Results for “Spectral methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

Pseudo spectral Chebyshev representation of few-group cross sections on sparse grids

This paper presents a pseudo spectral method for representing few-group homogenised cross sections, based on hierarchical polynomial interpolation. The interpolation is performed on a multi-dimensional sparse grid built from Chebyshev nodes. The representation is assembled directly from the samples using basis functions that are constructed as tensor products of the classical one-dimensional Lagrangian interpolation functions. The advantage of this representation is that it combines the accuracy of Chebyshev interpolation with the efficiency of sparse grid methods. As an initial test, this interpolation method was used to construct a representation for the two-group macroscopic cross sections of a VVER pin cell. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

A Gas Dynamics Method Based on The Spectral Deferred Corrections (SDC) Time Integration Technique and The Piecewise Parabolic Method (PPM)

We present a computational gas dynamics method based on the Spectral Deferred Corrections (SDC) time integration technique and the Piecewise Parabolic Method (PPM) finite volume method. The PPM framework is used to define edge averaged quantities which are then used to evaluate numerical flux functions. The SDC technique is used to integrate solution in time. This kind of approach was first taken by Anita et al in [17]. However, [17] is problematic when it is implemented to certain shock problems. Here we propose significant improvements to [17]. The method is fourth order (both in space and time) for smooth flows, and provides highly resolved discontinuous solutions. We tested the method by solving variety of problems. Results indicate that the fourth order of accuracy in both space and time has been achieved when the flow is smooth. Results also demonstrate the shock capturing ability of the method.

97 MATHEMATICS AND COMPUTING↗

Improvements in the Method of Radiation Anomaly Detection by Spectral Comparison Ratios

Algorithms for detecting illicit gamma radiation sources must respond to a wide variety of threat signatures and ignore a wider variety of clutter. Previously, we described the Nuisance-rejection Spectral Comparison Ratio Anomaly Detection (N-SCRAD) method for indicating the presence of threat sources during mobile search operations. Our method relies on the formulation of radiation alarm test statistics applied to detector counts in numerous spectral regions of interest and our test statistics are standardized by local estimates of background variability. In this work we present a new automated procedure for selecting test statistics and specifying the regions of interest based on minimizing detectable count rates of prototype threat spectra at a specified false positive rate using simulated annealing. The new procedure can be applied to configuring the detection algorithm when the prototype threats are many and diverse without significantly compromising the detection sensitivity to any one of them. N-SCRAD makes use of estimates of background variability obtained during a search from prior measurements of background. In applications such estimates made purely from past measurements sometimes do not extrapolate well to current conditions. In this work we present a new method for correcting those estimates to current conditions of the total count rate. We demonstrate that the correction lowers detection thresholds for a specified false positive rate, enabling greater sensitivity to targets. The two proposed improvements to N-SCRAD maximize detection power for the expected variety of possible threats while reducing or maintaining the false positive rate.

Anomaly detection, Gamma-ray spectroscopy, Radiati↗

A Comparison of Different Methods of Separation of Continuous Overlapping Spectral Lines

Several methods of separation of continuous overlapping spectral lines are compared. In the majority of methods, the profile of each line is modeled by a Gaussian or Lorentzian, and total measured spectrum z is processed. Number of lines N and their parameters are usually estimated by the method of derivatives; however, the differentiation of noisy spectrum z causes large errors. To improve the differentiation accuracy, it is proposed to use smoothing splines. In the Fourier-self-deconvolution method, apodization (artificial truncation of the interferogram) is used to resolve overlapping lines, which makes it possible to resolve lines, but at the expense of a significant decrease in their widths. In this work, reducing the widths of lines is not used for their resolution, but rather, true line profiles are reconstructed by minimizing the residual functional with the modified coordinate-descent method using the decremental-constraint technique, and also, for comparison, with the Nelder–Mead simplex method. In the Manoilov method, the parameters of lines (peaks) are determined from convolutions of spectrum derivatives with individual peaks. In that method, the notion of the degree of overlap has been also introduced. In this work, we introduce a generalized degree of overlap for the case in which the amplitudes, widths, and spacings between neighboring lines are different. Numerical illustrations are presented.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Determination of the parameters of a holographic layer from its spectral characteristics

Methods for estimating the main parameters of holographic sensors (refractive index modulation depth and hologram thickness) from transmission spectra in the absence of absorption and light scattering are discussed. The consideration is performed for layers oriented parallel to the holographic layer surface under normal light incidence. Direct numerical solution of the problem of light propagation in a periodic nonabsorbing medium is used to study the reflection and transmission spectra of the holographic layer in a wide range of variation in its thickness and the refractive index modulation depth. A classification of the reflection regimes from the holographic layer is proposed (from weak reflection to the photonic crystal regime). A comparison with the results obtained by the coupled-wave analysis is performed, and the limitations of this method at a significant spectral detuning from resonance and under conditions of strong reflection are revealed. It is shown that the main hologram parameters can be estimated from the experimental transmission spectrum of the phase hologram (in the case of strong reflection) based on the spectral dip parameters. (holographic sensors)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Spectrally encoded microbeads and methods and devices for making and using same

Spectrally encoded microbeads and methods and devices for making and using spectrally encoded microbeads are provided. The disclosed methods and devices facilitate the preparation and use of microbeads containing multiple lanthanide nanoparticles, which microbeads have uniquely identifiable spectral codes. The disclosed microbeads, and the methods and devices for making and using same, find use in multiplexing and high-throughput biomarker analysis.

Baxter, Brian Cullen↗

High-order accurate solutions of the point kinetics equations with the spectral deferred correction method

Solving initial value problems with higher-order methods can improve the accuracy of the simulation results or the efficiency of the calculation. In this paper, we apply the spectral deferred correction (SDC) method to solve the initial value problem of the point kinetics equations (PKE). SDC is a stable, robust, and efficient high-order time-integration method capable of an arbitrary order of accuracy. For our implementation we show that it is A-stable for orders up to 8 and the order of accuracy is verified for PKE problems with a range of different reactivities. A 5.-order SDC method was then implemented to solve the exact PKE (EPKE) in the Transient Multilevel (TML) method of MPACT. The error from solutions of the EPKE is shown to be negligible. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Charmonium spectral functions with the variational method in zero and finite temperature lattice QCD

We propose a method to evaluate spectral functions on the lattice based on a variational method. On a lattice with a finite spatial extent, spectral functions consist of discrete spectra only. Adopting a variational method, we calculate the locations and the heights of spectral functions at low-lying discrete spectra. We first test the method in the case of analytically solvable free Wilson quarks at zero and finite temperatures and confirm that the method well reproduces the analytic results for low-lying spectra. We find that we can systematically improve the results by increasing the number of trial states. We then apply the method to calculate the charmonium spectral functions for S and P-wave states at zero-temperature in quenched QCD and compare the results with those obtained using the conventional maximum entropy method (MEM). The results for the ground state are consistent with the location and the area of the first peak in spectral functions from the MEM, while the variational method leads to a mass which is closer to the experimental value for the first excited state. We also investigate the temperature dependence of the spectral functions for S-wave states below and above T{sub c}. We obtain no clear evidences for dissociation of J/{psi} and {eta}{sub c} up to 1.4 T{sub c}.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Charmonium spectral functions with the variational method in zero and finite temperature lattice QCD

We propose a method to evaluate spectral functions on the lattice based on a variational method. On a lattice with a finite spatial extent, spectral functions consist of discrete spectra only. Adopting a variational method, we calculate the locations and the heights of spectral functions at low-lying discrete spectra. We first test the method in the case of analytically solvable free Wilson quarks at zero and finite temperatures and confirm that the method well reproduces the analytic results for low-lying spectra. We find that we can systematically improve the results by increasing the number of trial states. We then apply the method to calculate the charmonium spectral functions for S and P-wave states at zero-temperature in quenched QCD and compare the results with those obtained using the conventional maximum entropy method (MEM). The results for the ground state are consistent with the location and the area of the first peak in spectral functions from the MEM, while the variational method leads to a mass which is closer to the experimental value for the first excited state. We also investigate the temperature dependence of the spectral functions for S-wave states below and above T{sub c}. We obtain no clear evidences for dissociation of J/{psi} and {eta}{sub c} up to 1.4T{sub c}.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Comparison of an electro-optical system and photo-conducting antenna employed as detectors of pulsed terahertz radiation by means of a new method for measuring spectral width

Two detection systems, electro-optical system and photoconducting system, are tested by the method suggested previously for determining the boundaries of broadband terahertz radiation in time-domain spectroscopy. From a series of measurements the error in determining the operation ranges is calculated. The terahertz spectrometer with an electro-optical detector based on a ZnTe (110) crystal of thickness 2 mm has the operation spectral range of 0.059 – 1.092 THz. The detector utilizing an iPCA-21-05-1000-800-h photo-conducting antenna with the same source of signal demonstrates a wider operation band ranging from 0.017 to 1.6 THz. The method developed makes it possible to experimentally compare the parameters of the considered terahertz spectrometers obtained under the same quality of adjustment. (laser applications and other topics in quantum electronics)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Flow-driven spectral chaos (FSC) method for long-time integration of second-order stochastic dynamical systems

For decades, uncertainty quantification techniques based on the spectral approach have been demonstrated to be computationally more efficient than the Monte Carlo method for a wide variety of problems, particularly when the dimensionality of the probability space is relatively low. The time-dependent generalized polynomial chaos (TD-gPC) is one such technique that uses an evolving orthogonal basis to better represent the stochastic part of the solution space in time. Here in this paper, we present a new numerical method that uses the concept of enriched stochastic flow maps to track the evolution of the stochastic part of the solution space in time. The computational cost of this proposed flow-driven stochastic chaos (FSC) method is an order of magnitude lower than TD-gPC for comparable solution accuracy. This gain in computational cost is realized because, unlike most existing methods, the number of basis vectors required to track the stochastic part of the solution space does not depend upon the dimensionality of the probability space. Four representative numerical examples are presented to demonstrate the performance of the FSC method for long-time integration of second-order stochastic dynamical systems in the context of stochastic dynamics of structures.

FSC↗

CFD validation in OECD/NEA t-junction benchmark.

When streams of rapidly moving flow merge in a T-junction, the potential arises for large oscillations at the scale of the diameter, D, with a period scaling as O(D/U), where U is the characteristic flow velocity. If the streams are of different temperatures, the oscillations result in experimental fluctuations (thermal striping) at the pipe wall in the outlet branch that can accelerate thermal-mechanical fatigue and ultimately cause pipe failure. The importance of this phenomenon has prompted the nuclear energy modeling and simulation community to establish a benchmark to test the ability of computational fluid dynamics (CFD) codes to predict thermal striping. The benchmark is based on thermal and velocity data measured in an experiment designed specifically for this purpose. Thermal striping is intrinsically unsteady and hence not accessible to steady state simulation approaches such as steady state Reynolds-averaged Navier-Stokes (RANS) models.1 Consequently, one must consider either unsteady RANS or large eddy simulation (LES). This report compares the results for three LES codes: Nek5000, developed at Argonne National Laboratory (USA), and Cabaret and Conv3D, developed at the Moscow Institute of Nuclear Energy Safety at (IBRAE) in Russia. Nek5000 is based on the spectral element method (SEM), which is a high-order weighted residual technique that combines the geometric flexibility of the finite element method (FEM) with the tensor-product efficiencies of spectral methods. Cabaret is a 'compact accurately boundary-adjusting high-resolution technique' for fluid dynamics simulation. The method is second-order accurate on nonuniform grids in space and time, and has a small dispersion error and computational stencil defined within one space-time cell. The scheme is equipped with a conservative nonlinear correction procedure based on the maximum principle. CONV3D is based on the immersed boundary method and is validated on a wide set of the experimental and benchmark data. The numerical scheme has a very small scheme diffusion and is the second and the first order accurate in space and time, correspondingly. We compare and contrast simulation results for three computational fluid dynamics codes CABARET, Conv3D, and Nek5000 for the T-junction thermal striping problem that was the focus of a recent OECD/NEA blind benchmark. The corresponding codes utilize finite-difference implicit large eddy simulation (ILES), finite-volume LES on fully staggered grids, and an LES spectral element method (SEM), respectively. The simulations results are in a good agreement with experimenatl data. We present results from a study of sensitivity to computational mesh and time integration interval, and discuss the next steps in the simulation of this problem.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Spectral Numerical Exterior Calculus Methods for Differential Equations on Radial Manifolds

We develop exterior calculus approaches for partial differential equations on radial manifolds. We introduce numerical methods that approximate with spectral accuracy the exterior derivative \(\mathbf {d}\) , Hodge star \(\star \) , and their compositions. To achieve discretizations with high precision and symmetry, we develop hyperinterpolation methods based on spherical harmonics and Lebedev quadrature. We perform convergence studies of our numerical exterior derivative operator \(\overline{\mathbf {d}}\) and Hodge star operator \(\overline{\star }\) showing each converge spectrally to \(\mathbf {d}\) and \(\star \) . We demonstrate how the numerical operators can be naturally composed to formulate general numerical approximations for solving differential equations on manifolds. We introduce findings for the Laplace–Beltrami equations demonstrating our approach.

97 MATHEMATICS AND COMPUTING↗

Convergence of Spectral Discretizations of the Vlasov--Poisson System

Here we prove the convergence of a spectral discretization of the Vlasov-Poisson system. The velocity term of the Vlasov equation is discretized using either Hermite functions on the infinite domain or Legendre polynomials on a bounded domain. The spatial term of the Vlasov and Poisson equations is discretized using periodic Fourier expansions. Boundary conditions are treated in weak form through a penalty type term that can be applied also in the Hermite case. As a matter of fact, stability properties of the approximated scheme descend from this added term. The convergence analysis is carried out in detail for the 1D-1V case, but results can be generalized to multidimensional domains, obtained as Cartesian product, in both space and velocity. The error estimates show the spectral convergence under suitable regularity assumptions on the exact solution.

97 MATHEMATICS AND COMPUTING↗

APPLICATION OF A DAMPED LOCALLY OPTIMIZED COMBINATION OF IMAGES METHOD TO THE SPECTRAL CHARACTERIZATION OF FAINT COMPANIONS USING AN INTEGRAL FIELD SPECTROGRAPH

High-contrast imaging instruments are now being equipped with integral field spectrographs (IFSs) to facilitate the detection and characterization of faint substellar companions. Algorithms currently envisioned to handle IFS data, such as the Locally Optimized Combination of Images (LOCI) algorithm, rely on aggressive point-spread function (PSF) subtraction, which is ideal for initially identifying companions but results in significantly biased photometry and spectroscopy owing to unwanted mixing with residual starlight. This spectrophotometric issue is further complicated by the fact that algorithmic color response is a function of the companion's spectrum, making it difficult to calibrate the effects of the reduction without using iterations involving a series of injected synthetic companions. In this paper, we introduce a new PSF calibration method, which we call 'damped LOCI', that seeks to alleviate these concerns. By modifying the cost function that determines the weighting coefficients used to construct PSF reference images, and also forcing those coefficients to be positive, it is possible to extract companion spectra with a precision that is set by calibration of the instrument response and transmission of the atmosphere, and not by post-processing. We demonstrate the utility of this approach using on-sky data obtained with the Project 1640 IFS at Palomar. Damped LOCI does not require any iterations on the underlying spectral type of the companion, nor does it rely on priors involving the chromatic and statistical properties of speckles. It is a general technique that can readily be applied to other current and planned instruments that employ IFSs.

79 ASTRONOMY AND ASTROPHYSICS↗

WE-FG-207B-12: Quantitative Evaluation of a Spectral CT Scanner in a Phantom Study: Results of Spectral Reconstructions

Purpose: To evaluate the quantitative image quality of spectral reconstructions of phantom data from a spectral CT scanner. Methods: The spectral CT scanner (IQon Spectral CT, Philips Healthcare) is equipped with a dual-layer detector and generates conventional 80-140 kVp images and variety of spectral reconstructions, e.g., virtual monochromatic (VM) images, virtual non-contrast (VNC) images, iodine maps, and effective atomic number (Z) images. A cylindrical solid water phantom (Gammex 472, 33 cm diameter and 5 cm thick) with iodine (2.0-20.0 mg I/ml) and calcium (50-600 mg/ml) rod inserts was scanned at 120 kVp and 27 mGy CTDIvol. Spectral reconstructions were evaluated by comparing image measurements with theoretical values calculated from nominal rod compositions provided by the phantom manufacturer. The theoretical VNC was calculated using water and iodine basis material decomposition, and the theoretical Z was calculated using two common methods, the chemical formula method (Z1) and the dual-energy ratio method (Z2). Results: Beam-hardening-like artifacts between high-attenuation calcium rods (≥300 mg/ml, >800 HU) influenced quantitative measurements, so the quantitative analysis was only performed on iodine rods using the images from the scan with all the calcium rods removed. The CT numbers of the iodine rods in the VM images (50∼150 keV) were close to theoretical values with average difference of 2.4±6.9 HU. Compared with theoretical values, the average difference for iodine concentration, VNC CT number and effective Z of iodine rods were −0.10±0.38 mg/ml, −0.1±8.2 HU, 0.25±0.06 (Z1) and −0.23±0.07 (Z2). Conclusion: The results indicate that the spectral CT scanner generates quantitatively accurate spectral reconstructions at clinically relevant iodine concentrations. Beam-hardening-like artifacts still exist when high-attenuation objects are present and their impact on patient images needs further investigation. YY is an employee of Philips Healthcare.

60 APPLIED LIFE SCIENCES↗

Evaluating Optical Classification for Fermi Blazar Candidates with a Statistical Method Using Broadband Spectral Indices

We aim to test whether a blazar candidate of uncertain type (BCU) in the third Fermi catalog of active galactic nuclei (3LAC) can be potentially classified as a BL Lac object or a flat-spectrum radio quasar (FSRQ) by performing a statistical analysis of its broadband spectral properties. We find that 34% of the radio-selected BCUs (583 BCUs) are BL Lac-like and 20% are FSRQ-like, at a 90% level of confidence. Similarly, 77.3% of the X-ray-selected BCUs (176 BCUs) are evaluated as BL Lac-like and 6.8% may be FSRQ-like sources. And 88.7% of the BL Lac-like BCUs that have synchrotron peak frequencies available are high synchrotron peaked BL Lacs in the X-ray-selected BCUs. The percentages are accordingly 62% and 7.3% in the sample of 124 optically selected BCUs. The high ratio of the number of BL Lac-like sources to the number of FSRQ-like BCUs in the X-ray-selected and optically selected BCU samples is due to selection effects. Examining the consistency between our evaluation and spectroscopic identification case by case with a sample of 78 radio-selected BCUs, it is found that the statistical analysis and its resulting classifications agree with the results of the optical follow-up spectroscopic observations. Our observation campaign for high-|ρ{sub s}| BCUs selected with our method, i.e., |ρ{sub s}|>0.8, is ongoing.

79 ASTRONOMY AND ASTROPHYSICS↗